Networking :: TLS Error: TLS Key Negotiation Failed To Occur Within 60 Seconds
Jan 24, 2011
i set up openvpn on server and configure it then create license file for client and done the rest but when the client want to connect i got the following error :
TLS Error: TLS key negotiation failed to occur within 60 seconds
and now the strange part is if i connect my pptpd connection ( which runs on another server ) and then connect openvpn again i connect instantly without any problem or error in my country im sure there is heavy firewall on all outgoing traffic but currently i do not understand what can cause this problem
i ran tcpcump and seems server receive packets and send it back to client ( though im not sure if client can get the response ) this is my server.conf
Code:
local myserver ip #Replace with your server IP address
port 443 #Replace with the desired port
proto udp #Choose between tcp and udp (remove instructions in bold)
[code]...
View 2 Replies
ADVERTISEMENT
Feb 9, 2010
i have installed nfs server on my redhat machine.when i want to mount shared data from client(suse)machine the following error occur."mount.nfs: mount to NFS server '10.3.31.146:/home/usbtest' failed: System Error: No route to host"
View 1 Replies
View Related
May 23, 2011
I've followed [URL] to set up vpns with some external networks. So far it worked like a charm on two of them. But when trying to connect to the third one I instantly get bumped off.
When running
Code:
pon dymka debug dump logfd 2 nodetach
I get this as part of my output
Code:
CHAP authentication succeeded
sent [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
rcvd [IPCP ConfReq id=0x26 <addr 192.168.0.2> <compress VJ 0f 00>]
sent [IPCP TermAck id=0x26]
rcvd [CCP ConfReq id=0x3e <mppe -H -M +S -L -D -C>]
Refusing MPPE stateful mode offered by peer
MPPE required but peer negotiation failed
sent [LCP TermReq id=0x2 "MPPE required but peer negotiation failed"]
sent [CCP ConfRej id=0x3e <mppe -H -M +S -L -D -C>]
rcvd [CCP ConfNak id=0x1 <mppe -H -M +S -L -D -C>]
Discarded non-LCP packet when LCP not open
rcvd [LCP TermAck id=0x66]
Connection terminated.
Waiting for 1 child processes...
script pptp xxx.xxx.xxx.xxx--nolaunchpppd, pid 8920
Script pptp xxx.xxx.xxx.xxx --nolaunchpppd finished (pid 8920), status = 0x0
I've looked all over the internet but sollutions like adding mmpe-stateful to options.pptp doesn't work. Is this a problem with the client or with the server? Because the server is configured just like the other two and they work as intended. Seemed to be a problem on the firewall.
View 3 Replies
View Related
Aug 24, 2010
Im trying to maximize my network connectivity. To do this I have begun using the program ethtool. The first thing I did was run
Code:
#ethtool eth0
which informed me Im running 10BaseT mode. So i though, ok, that has to do with the autoneg right?
so I ran:
Code:
# ethtool -s eth0 speed 1000 duplex full autoneg off
[Code]...
LOLz, I got it now, This computer has 2 nics installed! Thats why the link stat was "Link detected: no"
I moded my code to pertain to eth1, the connected port. Eh, anyhow, Im still not sold on this problem being solved, the connection eth1 seems to work fine at 100BaseT/Full but I loose connectivity when trying to use 1000BaseT/Full despite the nic showing it as a supported mode.
View 4 Replies
View Related
Mar 21, 2010
Something go wrong with php and Apache, at first, the $GLOBALS array is looking like this
Code:
Array
(
[code]....
View 2 Replies
View Related
Feb 3, 2010
i have downloaded gtgz compressed files for openfoam software but when i try to decompress it an error message appear and the decompression didn't occur.
View 3 Replies
View Related
Feb 9, 2010
I have an error with the Firewall in F12. The firewall start in gui, the 1st window: Firewall Configuration startup come but when I close it the following error occur:
org.fedoraproject.slip.dbus.service.PolKit.NotAuth orizedException.org.fedoraproject.config.firewall. auth:
I can do: Redo or Quit ( redo will pop out the same error).
View 3 Replies
View Related
Mar 31, 2010
When the RPM runs it come up with this error. How do I install the required dependencies? I have added more repositories, but still there are a few dependencies missing. Is there a zypper/sudo -get or something available? Opensuse 11.1 Gnome
[code]...
View 4 Replies
View Related
Feb 12, 2011
Having a problem with my Belkin wireless adapter when trying to stream music to my Pinnacle Soundbridge.The network connection is usually rock steady but drops anywhere between and few second and a few minutes after streaming music. Network manager still shows the connection to my home network as active but it is not. The connection comes back when I unplug the dongle and plug it back in. I found the following message repeated in the syslog
phy3 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3040 with error -110
Only thing I have noticed is that it refers to rt2x00 when I had thought it used the rt73usb driver.Had the PC and the Soundbridge for a number of years without any problems but I did recently have to reinstall Ubuntu from scratch. Currently running Ubuntu 10.10
View 4 Replies
View Related
Jan 25, 2010
I want to mount my USB on Linux system using the following comman mount /dev/sda1 /mnt/usb an error occur "unknown file system ntfs".how can i resolve this issue?
View 1 Replies
View Related
Dec 29, 2010
I am using squid to controlling access to the internet all is working fine expect one of the user who is using outside organization portal to connect internet. But whenever he tries to enter in the portal by typing (EXAMPLE)url. Permission denied error from squid occur.
How can i allow this portal in squid. So squid will allow this to access.
View 1 Replies
View Related
Apr 11, 2010
How do i test negotiation between server and client for various protocols like:
ppp
pppoe
pptp
L2tp
dhcp
View 5 Replies
View Related
Feb 4, 2010
I have successfully connected to my ubuntu server from XP using VNC over SSH from within my internal network.But when I try from an external network I can SSH but VNC times out. Using netstat I see vino server listening on 5900. Using ps -ef I see vnc and vino-server and vino. In auth.log I see :
Feb 4 17:07:25 DellD600 sshd[8754]: error: connect_to 123.243.**.** port 5900: failed.
Feb 4 17:11:14 DellD600 sshd[8754]: error: connect_to 123.243.**.** port 5900: failed.
These entries coincide with when vnc times out, after a minute or so. I have tried realVNC and TightVNC with similar results. Im connecting specifying localhost in VNC and port 5900 in and out in putty - same as I do when connecting locally. The error messages dont give me a lot to go on. Im assuming the problem must be on the ubuntu server itself since Im getting in through SSH and hitting the logs ?
View 9 Replies
View Related
Nov 2, 2010
I am currently trying to upgrade over 100 rpms on multiple Red Hat servers. Whenever I try to do a rpm -u /packages/*.rpm i recieve a failed dependencies error on the very first rpm. I know that I can go though each rpm one by one and trace each dependency but that will take forever. Is there a way to skip these errors? I know the -nodeps command for rpm but I dont want to screw something up but running all of these rpms on -nodeps
View 10 Replies
View Related
Jan 16, 2010
I have been working on this for a while now and am absolutely stumped. Basically, what i am attempting to do is make my ubuntu box into a gateway for my network. I have everything working thru hard wire, but I simply cant get the wireless to work. No matter what I do, I cannot get my wireless card to transmit an essid and allow nodes to connect. I have tried assigning it in the interfaces file (shown below), and I have also tried manually modifying it using the iwconfig command. Here is the topology:
eth1: internet WAN
eth2: ethernet out to LAN
ra0: wireless out to LAN
Here is a copy of my /etc/network/interfaces file:
[CODE]
auto lo
[Code]...
View 2 Replies
View Related
Jun 20, 2010
I am trying to set up my Ubuntu 10.04 netbook to see my WinXP desktop's files and vice a versa. I followed the steps in this tutorial thread: HOWTO: Setup Samba peer-to-peer with Windows. I got as far as "Time to add yourself as an samba user." at this point I keep getting the following error:
Code:
sudo smbpasswd -L -a WinXP_User_Name
New SMB password:
Retype new SMB password:
Failed to add entry for user WinXP_User_Name.
My WinXP machine has no password.
My conf file is here:
[global]
; General server settings
; netbios name = WinXP_Computer_Name
server string =
; workgroup = WinXP_WorkStation_Name
announce version = 5.0
socket options = TCP_NODELAY IPTOS_LOWDELAY SO_KEEPALIVE SO_RCVBUF=8192 SO_SNDBUF=8192
passdb backend = tdbsam
security = user .....
View 9 Replies
View Related
Nov 24, 2010
I am having difficulties in establishing a vpn connection using vpnc (or NetworkManaager-vpnc).
As long as the openswan IPsec daemon is running, vpnc-helper quits with the error message
Quote:
Failed to bind to 0.0.0.0:500: Address already in use
[user@computer ...]# vpnc-helper --local--port 0
If I use NetworkManager-vpnc, then establishing the connection simply fails.
Using the --local-port 0 option does not change anything.
If I stop the ipsec service (service ipsec stop) then establishing the connectiong works, both with NetworkManager-vpnc and the console tool, but apparently the network traffic is not routed via the VPN - in my case this means that I cannot access hosts within the vpn and stuff.
Funny thing is - on my notebook from where I connect via WLAN, everything works fine. With Fedora 13 everything works fine, too.
Does anybody have an idea how to enforce that the vpn connection is actually used?
View 2 Replies
View Related
Jan 6, 2010
hakan@hakan-desktop:~$ smbtree
WORKGROUP
HAKAN-LAPTOP hakan-laptop server (Samba, Ubuntu)
cli_start_connection: failed to connect to HAKAN-LAPTOP<20> (0.0.0.0). Error NT_STATUS_BAD_NETWORK_NAME
[code]....
one hour later. dont change anything.
hakan@hakan-desktop:~$ smbtree
WORKGROUP
HAKAN-DESKTOP hakan-desktop server (Samba, Ubuntu)
HAKAN-DESKTOPdeluge
[code]....
what can i do?
View 9 Replies
View Related
Feb 7, 2011
AMD64, Ubuntu 10.10 64bit os, with onboard video.Works really well all the way to 1680X1050 resolution, but I get this error every 10 seconds added to my syslog.
View 9 Replies
View Related
Oct 14, 2010
Subprocess failed. Error: RPM failed: installing package xen-4.0.0_21091_06-0.1.1.x86_64 needs 27MB on the /boot filesystemI seem not to be able to change the size of the /boot, but 11.2 loads okay but not 11.3There only 19MB left from 66 and I can't make it bigger, I hope there is someone thathas seen this. I would like to see some of the update with XEN.
View 1 Replies
View Related
Jan 2, 2010
I have two computers running Ubuntu 9.10, both have one shared folder. These were set up via Nautilus.
On computer 1 I can see and use the shared folder of computer 2 just fine.
On computer 2 I can NOT see the shared folder of computer 1 anymore since recently. I has worked in the past.
Some more information: the name of computer 1 is "daniel", the share name is "gedeeld". So the address of the shared folder of computer 1 would be smb://daniel/gedeeld/
Opening this address in Nautilus works fine on computer 1 (that shares the folder), but results in an error on computer 2.
Error: failed to mount Windows share. Please select another viewer and try again.
View 1 Replies
View Related
Apr 9, 2010
Today i upgraded my system and started getting error when i update, install or remove a package. The error isn't restricted only to one repository so i thing something is wrong with my system.
[Code]....
View 4 Replies
View Related
Oct 4, 2009
It's been awhile since I posted anything which is a good sign my install has been working well and I have been able to handle most everything. However, I'm not able to handle this issue. I recently installed F11 and everything went well. But, when trying to see my other computers on the local network, I cannot. I receive this error message: Unable to mount location Failed to receive shared list from server. I understand the message as it is obvious, but do not know how to fix it.
View 14 Replies
View Related
Sep 24, 2010
I have been having off and on issues with my samba file shares. I am sharing a NTFS formated hard drive where the mount point is in my home directory, as well as a printer connected via USB. I am to the point where printing works (using it as an ipp print share, samba is configured for it, but I don't know if it works or not), and I can access the shared folder from Windows, but I can't access the shared folder from any Ubuntu machine. I get the error:
[Code]....
View 5 Replies
View Related
Nov 15, 2009
I have a desktop that has a d-link DWL-520 wireless card, which was working under Windoze. Today I installed Centos 5.4 on the system , which went cleanly. I then used Network Configuration to set up the wireless card. I specified to use DHCP, set the SSID and authentication password. When I tried to activate the card I get these error messages
Error for wireless request "Set Mode" (8B06): SET failed on device wlan0 ; Operation not supported. Error for wireless request "Set Encode" (8B2A): SET failed on device wlan0 ; Invalid argument. Error for wireless request "Set Encode" (8B2A): SET failed on device wlan0 ; Invalid argument. Determining IP information for wlan0.
The hardware manager seems to have correctly identified the card and chipset, (Intersil Prism 2.5) and installed driver hostap_pci which came with the distro. This web site seems to suggest that this is the correct driver: [URL] searching forums I've found a few references to these errors, but they were from several years ago, and for different distros and cards. I did find a reference to using Network Manager to configure the card instead of Network Configuration. I started the NM service and configured a connection using it instead, but still no luck.
[Code]....
View 15 Replies
View Related
Nov 1, 2010
I have centos 5.3 i got the login screen but after logging shows error as-- your session only last less than 10 seconds . if you have not logged out yourself tyhis could mean that there is some installation problem or that you may out of disk space .try logging with one of fail session.
views details:
There is lot of space in hardisk and tmp.
View 1 Replies
View Related
Nov 23, 2010
i am trying to install symantec endpoint on a linux server by this command rpm -ivh sav-1.0.3-8.i386.rpm but it gives me the following error error: unpacking of archive failed on file /opt/Symantec/bin/navdefutil;4ceb8d6b: cpio: mkdir failed - No such file or directory
View 3 Replies
View Related
Mar 5, 2011
When I try to run the Online Updates to the system through Yast I get the following errors for each package:
[QUOTE]
Subprocess failed. Error: RPM failed: warning: /var/cache/zypp/packages/Packman Repository/Multimedia/i586/libaudcore1-2.4.4-1.pm.1.1.i586.rpm: Header V3 DSA/SHA1 Signature, key ID 9a795806: NOKEY
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
[Code]...
View 3 Replies
View Related
Aug 7, 2010
When I use the following command:
ssh user@ssh_server -L 5500:localhost:5500 -p 22
everything works fine. I can log in, and local port forwarding is done. Otherwise when I use the command:
ssh user@ssh_server -R 5500:localhost:5500 -p 22
I get an error "remote port forwarding failed for listen port 5500". However when I try remote port forwarding in WinXP by use of putty there is no problem...
View 2 Replies
View Related
Nov 7, 2010
I just installed Lucid off an official CD onto a Dell Inspiron 1521 and the wireless doesn't work. It worked out of the box on 9.04, which is what I was most recently using. The wired connection does not work either. I'm not sure why. I'm aware that I probably need some sort of driver for my Broadcom card. I read that I could get the drivers off the cd, and I think I did it (although possibly not correctly.) I got what I think is the correct driver, bcmwl-kernel-source, and also something called fwcutter I think maybe by accident. They both show in the Hardware Drivers list, but when I try to activate them I get "System Error: installarchives() failed". I tried using:
[Code]...
View 2 Replies
View Related
