Programming :: X Error Of Failed Request - BadMatch?
Mar 15, 2010
I'm working on a old piece of code on linux, after compiling without porblem at the execution I have this response:
src/xproject/xproject: Ok, a color display! :-)
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 78 (X_CreateColormap)
Serial number of failed request: 7
Current serial number in output stream: 15
looking at the source code I think the problem is related at the depth of my system 24 bit and the depth of this old piece of code 8 bit. Unfortunately also I don't have experience in programming the XVideo and if someone can give me some help in programming the XVideo interface
View 5 Replies
ADVERTISEMENT
Feb 12, 2011
Having a problem with my Belkin wireless adapter when trying to stream music to my Pinnacle Soundbridge.The network connection is usually rock steady but drops anywhere between and few second and a few minutes after streaming music. Network manager still shows the connection to my home network as active but it is not. The connection comes back when I unplug the dongle and plug it back in. I found the following message repeated in the syslog
phy3 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3040 with error -110
Only thing I have noticed is that it refers to rt2x00 when I had thought it used the rt73usb driver.Had the PC and the Soundbridge for a number of years without any problems but I did recently have to reinstall Ubuntu from scratch. Currently running Ubuntu 10.10
View 4 Replies
View Related
Jul 10, 2011
During installation at, Select and install software, i had this extra option "Packages to install: rt2x00-source", and answered yes. sources.list has main and contrib sections.
lspci -k
Network controller: RaLink RT2561/RT61 802.11g PCI
Subsystem: Linksys WMP54G ver 4.1
Kernel driver in use: rt61pci
ifup wlan0 returns this,
SIOCSIFFLAGS: No such file or directory
[Code]...
View 5 Replies
View Related
Jan 15, 2010
I just made a fresh installation of Ubuntu Karmic, but I can't set up my screen resolution correctly. My monitor resolution (1680 x 1050) is not listed in 'Display Preferences' or in my card's proprietary software (ATI Catalyst). The maximum resolution I can select is 1440 x 900.xrandr detects a maximum resolution of 1440 x 1440 and displays the same list of screen resolutions as 'Display Preferences'.
But when I enter the line:
xrandr --newmode "1680x1050_60.00" 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync
I always get this message:
X Error of failed request: BadName (named color or font does not exist)
Major opcode of failed request: 156 (RANDR)
Minor opcode of failed request: 16 (RRCreateMode)
[code]....
View 2 Replies
View Related
Jun 15, 2010
I am trying to backup a client called greetings.com, but when I do an amcheck on the server, I get:
WARNING: greetings.com: selfcheck request failed: Connection refused
View 2 Replies
View Related
Feb 22, 2011
when i ran amcheck DailySet1 as backup user and got these messages:
[Code]....
View 3 Replies
View Related
Nov 12, 2010
Although Win7 is not bad either, I'm really happy using new Ubuntu Maverick Meerkat on my notebook. Since I've been using Linux (SimplyMepis, then Arch) on my desktop, I'm really happy that I found a Linux distro which suits me the best. BTW, I have a Toshiba T130-10g which I love for its long battery life. However, I would like to solve some issues/dilemmas/questions (and I searched for s the solutions of some of them on Google so please don't tell me to use it...)
1) How do I turn off Wifi completely in a comfortable way? I tried sudo iwconfig wlan0 txpower off but it threw: Error for wireless request "Set Tx Power" (8B26): SET failed on device wlan0 ; Operation not supported. I even edited something in interfaces configuration file, but it did nothing. Oh, I forgot, my notebook doesn't have a hardware switch to turn off wifi.
2) Setting brightness doesnt work for my laptop. I can set it by udo setpci -s 00:02.0 F4.B=25 but I'm looking for a more comfortable solution. BTW, editing one GRUB configuration file didn't help and ended in booting into command line (it was something with adding backlight=vendor or something like that...)
3) My touchpad is sometimes too sensitive and clicks somewhere sometimes when I don't want to it. How to make clicks less sensitive? I tried to play with some mouse settings but it didn't help much but perhaps I'm setting a bad parameter.
4) I remember that back in KDE 3.5 times a network manager icon had a setting to switch on net statistics so I could very easily see how much I downloaded every day. But, since KDE 3.5 is not supported anymore, I stopped using it in refusal to update to KDE 4.XX and switched to GNOME. Since for some months I'll have a limited download connection, is there something esay in GNOME to watch my net statistics that wouldn't be deleted after reboot/shutdown?...
View 1 Replies
View Related
Jan 29, 2011
I'm trying to authenticate with github, however when I try to:
Code:
I've done all the steps mentioned here: http://www.linuxquestions.org/questi...el-0-a-676673/
ie:
Code:
I also restarted sshd. This gave me the following error:
Code:
I found ponce's post about it so I assume it's not an issue. Sshd is running.
View 1 Replies
View Related
Aug 3, 2009
I spend all day, trying to make bluetooth working with my phone Nokia 2600. First, i try'it with bluez-utils 3.7, and later with 3.9, but i no luck. So, what i have. I use hcitool to scan for my device, and find'it. Next, i connect to my phone with success. Then i try pairing with my phone, using "auth", but here i got error: HCI authentication request failed: Input/output error
View 1 Replies
View Related
May 19, 2011
Basically I want to change the resolution on my computer as the desktop is partially lost off of the screen. The needed resolution is not available so I am attempting to add a new resolution. I have used the [URL] for information on how to do this. I am completely new to Ubuntu and entering code so a TON of the results online have meant jibberish to me as people leave out the basics which I cannot find. Here is what I've done so far in the terminal...
I enter:
xrandr
I get:
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192
HDMI-0 disconnected (normal left inverted right x axis y axis)
VGA-0 disconnected (normal left inverted right x axis y axis)
DVI-0 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 698mm x 392mm
1920x1080 60.0*+
1920x1080i 30.0
1280x720 60.0
2020x1180_60.00 (0x169) 200.0MHz
h: width 2024 start 2160 end 2376 total 2728 skew 0 clock 73.3KHz
v: height 1180 start 1183 end 1193 total 1224 clock 59.9Hz
I enter:
xrandr --newmode <Mode''Line>
I get:
bash: syntax error near unexpected token 'newline'
Already I see an error message though without knowing what else to do I try to continue the code as follows...
I enter:
cvt 2020 1180
I get:
# 2024x1180 59.90 Hz (CVT) hsync: 73.31 kHz; pclk: 200.00 MHz
Modeline "2024x1180_60.00" 200.00 2024 2160 2376 2728 1180 1183 1193 1224 -hsync +vsync
At this point I see it shows 2024x1180 when I actually entered 2020x1180 which I find odd, though I try the next part with both 2024 and 2020 with same results.
I enter:
xrandr --newmode "2020x1180_60.00" 200.00 2024 2160 2376 2728 1180 1183 1193 1224 -hsync +vsync
I normally get no response after with a blank cursor, though one time I got:
X Error of failed request: BadName (named color or font does not exist)
Major opcode of failed request: 150 (RANDR)
Minor opcode of failed request: 16 (RRCreateMode)
Serial number of failed request: 27
Current serial number in output stream: 27
View 1 Replies
View Related
Jul 25, 2011
I recently ran into the following problem when trying to ssh into my Ubuntu 11.04 server:
>> ssh user@site.com
PTY allocation request failed on channel 0
I don't know for sure, but I think this happened after one of the latest Ubuntu updates I installed. In case it's of relevance, I'm remoting in from Terminal (Mac OS X 10.7 - Lion). Edit: The problem seems to be with Lion..
[Code]...
View 1 Replies
View Related
Feb 1, 2010
I recently installed two PC with debian lenny (kernel 2.6.26). One is called serveur-debian1 and the second one serveur-debian2. I have installed gnome,samba, mysql5, apache2, php5, and Virtualbox,bridge-tools on them. On serveur-debian2, i installed an other virtual debian lenny with apache2,mysql5,php5,nagios and centreon on it to view my network. I remember having installed a soft to access nntp on serveur-debian2 in order to test nagios.
Since a few days, i have problem to access to my servers. rom my windows 7 client, i try to ping serveur-debian1. Response is OK but not for all resquets Always from the same computer, i try to ping serveur-debian2. Response is OK but not for all again.
When i launch a ping on serveur-debian1 and serveur debian2 at the same time i have:
ping 1 to 10: serveur-debian1: response OK
serveur-debian2: no response
ping 11to 14: serveur-debian1: no response
serveur-debian2: response OK
ping 15 to 25: serveur-debian1: respone OK
serveur-debian2: @ip serveur-debian1 network unreachable (there's no error, it shows me the ip of serveur-debian1)
If i switch on the debian virtual server on the serveur-debian2, and i ping it at the same time, the response is OK for all resquests. The problem is very strange. I can't have a correct connection and when i launch a request from a software which access the mysql server, the requests failed ...
View 4 Replies
View Related
Mar 30, 2010
I'm trying to manually connect my wireless adapter to my router using WPA. I'm using Madwifi drivers for my D-Link DWL-G630. I keep getting the same error " Association request to the driver failed". I can connect to my router using wep through the GUI. I can not connect using the terminal. I created my /etc/wpa_supplicant.conf file
ap_scan=1
ctrl_interface=/var/run/wpa_supplicant
network={
ssid="NYNET"
scan_ssid=0
[code]....
I run these two commands
sudo ifconfig wlan3 down
sudo dhclient -r wlan3
the I run
sudo wpa_supplicant -Dwext -iwlan3 -c/etc/wpa_supplicant.conf -dd
jmorales@jmorales-laptop:~$ sudo ifconfig wlan3 up
jmorales@jmorales-laptop:~$ sudo dhclient -r wlan3
Internet Systems Consortium DHCP Client V3.1.2
[code].....
View 2 Replies
View Related
Nov 25, 2009
I am sending message from linux to windows system as follows echo "test"|smbclient -M <IP Add>But I am getting "session request failed" message . How can I solve it? <Ip Add> in network and reachable.
View 1 Replies
View Related
Jun 4, 2010
I installed amanda on a client that uses Red Hat Enterprise Linux 4. When I do an amcheck from the server, I get this:
Amanda Backup Client Hosts Check
--------------------------------
WARNING: 192.168.3.23: selfcheck request failed: recv error: Connection reset by peer
Client check: 1 host checked in 0.022 seconds. 1 problem found.
I am using bsdtcp. I get an ACK error if I switch the client to bsd authentication. I read that I should enter servers adress to hosts file in /etc/ directory?
View 3 Replies
View Related
Dec 25, 2010
yesterday i update my ubuntu 10.04 lts, and began the problens. i am using 2.6.32-24-generic, in a HP DV6 2145es do we know?
syslog saidme: wpa_supplicant[1093]: Association request to the driver failed search in google i founded that the problem is possible that it is in wpa_supplicant.conf. my fiel is in : /etc/dbus-1/system.d/wpa_supplicant.conf and i think that is necesary be in /etc . it is truh? when i check my fiel, i founded this:
<!DOCTYPE busconfig PUBLIC
"-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
"http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
<busconfig>
[code]....
View 7 Replies
View Related
Mar 31, 2010
When the RPM runs it come up with this error. How do I install the required dependencies? I have added more repositories, but still there are a few dependencies missing. Is there a zypper/sudo -get or something available? Opensuse 11.1 Gnome
[code]...
View 4 Replies
View Related
Feb 27, 2009
I use web server apache use php fastcgi (Centos 5.2, apache 2.2.9 , php 5.2.5 and fcgi-2.2.4 ). I receive error : "The server encountered an internal error or misconfiguration and was unable to complete your request. contact the server administrator, no-reply@zz.vn and inform them of the time the error occurred, and anything you might have done that may have caused the error. I view log :
[code]...
View 1 Replies
View Related
Sep 27, 2010
Im trying to do a remote execution of scripts through SSH in PHP. What im doing:
-Use PHP in conjunction with nagios' check_by_ssh script to execute the script.
-I used
[code]...
-It gives me a 'Host key verification failed' error even though i enabled it to ssh from my server to server01 without password. My Qn: How do i get it to work?
View 3 Replies
View Related
Feb 15, 2011
The following command would remove the leading astericks, spaces, slashes, tabs and is present in an awk script.
Code:
gsub(/^[/* ]*/,"")
The above code is working fine when i run in Cygwin on windows machine. But when i run in Ubuntum throws the following error.
Code:
awk: ./Format.awk: line 30: regular expression compile failed (bad class -- [], [^] or [)
^[
awk: 30: unexpected character ''
awk: ./Format.awk: line 30: runaway regular expression /,""); ...
View 2 Replies
View Related
Dec 15, 2010
I tried to install valgrind to my local directory (I don't have privilege to install it under root) by doing the following 3 steps:
(1) ./configure --prefix=/my/local/directory
(2) make
(3) make install
when I run
./valgrind ls -l
as instructed by README, I got this error: valgrind: failed to start tool 'memcheck' for platform 'x86-linux': No such file or directory
View 1 Replies
View Related
Jun 25, 2010
how to redirect all client http request to https request in squid
View 1 Replies
View Related
Sep 14, 2009
Dear all,
My application has to listen to http request and it must be able to read the http header and then forward the request from proxy. All these things must be done on C/C++. please help me. Awaiting for your reply.
Thank in advance
View 4 Replies
View Related
May 5, 2010
in the access logs i have this:
Code:
IP.IP.IP.IP - - [01/May/2010:11:21:10 -0400] "BIG STRING" 414 250
how can i grep and pull the IP based on the request string?
View 7 Replies
View Related
Jul 8, 2011
Hi, is it possible to send a request to a http server without using sockets?
View 7 Replies
View Related
Nov 9, 2010
I use slackware current, and curl and wget give the following errors:
Code:
repo@cannabis ~]$ wget -r http://users.telenet.be/reggersjans
--2010-11-09 13:48:14-- http://users.telenet.be/reggersjans
Resolving users.telenet.be (users.telenet.be)... ::ffff:74.117.221.11, 74.117.221.11
Connecting to users.telenet.be (users.telenet.be)|::ffff:74.117.221.11|:80... connected.
HTTP request sent, awaiting response... 400 Bad Request
[Code]...
View 7 Replies
View Related
Mar 2, 2010
I can not install files RPM, says there is error in the request.
View 1 Replies
View Related
Aug 10, 2010
End_request: I/O error, dev sds, sector 420656157
EXT3-fs error (device sda2) : ext3_find_entry : reading directory # 52527153 offset
What is this Above Error which I am getting , on my server
View 3 Replies
View Related
May 4, 2010
Anyone know what this signifies in the Apache logs files:
Code:
[Tue May 04 20:56:06 2010] [error] [client *******] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
[Tue May 04 20:56:06 2010] [error] [client *********] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
[Tue May 04 21:05:18 2010] [error] [client ********] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
[Tue May 04 21:05:18 2010] [error] [client ********] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
View 2 Replies
View Related
Sep 1, 2011
i've installed nagios just from a while and after i installed centreon, since this when i try to log in the web interface of nagios it shows up this message: Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request. contact the server administrator, webmaster@localhost and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log. Apache/2.2.17 (Ubuntu) Server at localhost Port 80
View 1 Replies
View Related
