Ubuntu Servers :: Error - Misconfiguration And Was Unable To Complete Your Request
Sep 1, 2011
i've installed nagios just from a while and after i installed centreon, since this when i try to log in the web interface of nagios it shows up this message: Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request. contact the server administrator, webmaster@localhost and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log. Apache/2.2.17 (Ubuntu) Server at localhost Port 80
I use web server apache use php fastcgi (Centos 5.2, apache 2.2.9 , php 5.2.5 and fcgi-2.2.4 ). I receive error : "The server encountered an internal error or misconfiguration and was unable to complete your request. contact the server administrator, email@example.com and inform them of the time the error occurred, and anything you might have done that may have caused the error. I view log :
I'm setting up Ubuntu 10.04 Server x64 on a Gateway DX4710. I installed on a 500GB SATA, using encrypted LVM, added webmin, and used ufw to configure iptables. All seemed fine.I then set up RAID1 on two 1TB SATAs. Using webmin, I created Linux RAID partitions on sdb and sdc. I then ran ...
All still seemed fine.I could see /data in the webmin filesystem list, and had ca. 1.4TB total local disk space.At that point, I decided that I really wanted an encrypted filesystem on /dev/md0. I also needed to tweak the fan setup. And so I shut down, without adding /dev/md0 to fstab. And it was probably still synching.Now /dev/md0 is semi missing. That is ...
sudo mdadm -D /dev/md0 => doesn't exist sudo mdadm -E /dev/sdb1 => part of RAID1 with sdc1 sudo mdadm -E /dev/sdc1 => part of RAID1 with sdb1
What do I do now? Can I recover /dev/md0? Is it just that I didn't add it to fstab? Can I just do that now? Or do I need to delete sdb1 and sdc1, and start over?
Cannot get vmware server to work properly running on ubuntu server 9.04
Trying to access the web interface have to highlight the url and keep hitting enter several times to get to the login and after logging in it is real slow and nothing works cannot create virtual machines
Having a problem with my Belkin wireless adapter when trying to stream music to my Pinnacle Soundbridge.The network connection is usually rock steady but drops anywhere between and few second and a few minutes after streaming music. Network manager still shows the connection to my home network as active but it is not. The connection comes back when I unplug the dongle and plug it back in. I found the following message repeated in the syslog
phy3 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3040 with error -110
Only thing I have noticed is that it refers to rt2x00 when I had thought it used the rt73usb driver.Had the PC and the Soundbridge for a number of years without any problems but I did recently have to reinstall Ubuntu from scratch. Currently running Ubuntu 10.10
I have an MD3000 storage attached to dell server via sas cables, running ubuntu server. the kernel keeps throwing these messages every other second on the console, but the drives from MD are fully accessible.
Jan 3 12:04:24 node2 kernel: [71041.035822] sd 5:0:1:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jan 3 12:04:24 node2 kernel: [71041.035828] sd 5:0:1:0: [sde] Sense Key : Illegal Request [current] Jan 3 12:04:24 node2 kernel: [71041.035833] sd 5:0:1:0: [sde] <<vendor>> ASC=0x94 ASCQ=0x1ASC=0x94 ASCQ=0x1
I recently ran into the following problem when trying to ssh into my Ubuntu 11.04 server:
>> ssh firstname.lastname@example.org PTY allocation request failed on channel 0
I don't know for sure, but I think this happened after one of the latest Ubuntu updates I installed. In case it's of relevance, I'm remoting in from Terminal (Mac OS X 10.7 - Lion). Edit: The problem seems to be with Lion..
I use Apache 2.0.55 (Ubuntu) as a document server for a business association. When the document files expire, I change the permissions so that only the owner can open them but I like to leave them on the server so that they are all in one place.
Here is my trouble--when visitors come to the site and get the directory listing, all the document files show up, whether the visitor can access them or not.
Is there some way to configure the server to not show the inaccessible files?
I guess a few technical details might help. During their useful lives, the files permissions are set to 644. Once they expire, I change them to 600. After the change, the files are still visible. Setting them to 000 doesn't help either.
It might be of note, but directories behave differently than files. If I set a directory to 600, it disappears from the listing.
Is there a way trigger a shell script after my DHCP server successfully gives out, either a specific IP address or to a specific MAC address.I have two Xbox360's in my house that both receive IP address via DHCP reservations from the Ubuntu server.I have come to accept that without having two public IP addresses getting both to have an open NAT will be very difficult. I have decided that I am OK with only one being able to have an Open NAT at a time, but I want to change the firewall rules according to which Xbox 360 turned on first. This way I can move between level in my house and play online without having to modify rules manually.
i have installed nagios in centos 64 bit. but i get this error CHECK_NRPE: Error - Could not complete SSL handshake. i have totally 10 hostgroup definitions. but i'm getting error for only 3 hostgroup definitions other 7 are working fine.
I have installed the latest server (Ubuntu 10.04). When I tried (including sudo apt-get update first followed by sudo apt-get install virtinst) I get Unable to locate the package virtinst. It also did it for a few others as well. The apt-get update command is successful (on the console it says it is Done). I have network connection (no proxy) and I am able to ping other systems at home and outside world. So I don't believe it is network issue.
Decided to upgrade my 8.04 server to 10.04 today. Everything went smooth when I tried to install in vmware. When I tried to install it on my real machine the installation hangs at 74% Storing Language...
I've checked the disk and I tried different ways to install (different language, both keyboard and system). The first two attempts the installer just turns off and the computer reboots. This third time it just hangs. how to debug and solve this problem?
It's the x86_64 version. I'm using the standard options all the time including LVM on whole disk.
i started on the "Installation & Upgrades" Forum. So this is basically a repost. I configured an encrypted swap during the installation process of my kubuntu maverick using the manual install CD. I do not use LVM. This worked fine but I made the mistake of assigning a password to the encrypted swap. I would like to change this in favor for a random key. I tried to change /etc/crypttab in the following way:
Now the system still asks for a password for sda7_crypt at startup, but does not recognize the old password. It seems that the swap gets a random key and works fine anyway, so I really want to remove only the question for the PW at boot time. This is not a big issue, but it is annoying. When the system is up I can do swapoff and swapon without problems and no password is needed. Directly after boot swap works:
New to Ubuntu not to Unix. I am having issues with aptitude updates. Gives error unable to locate. When I look for the file manually I cannot find it either. It is looking for http://us.archive.ubuntu.com/ubuntu/ lucid/main Translation-en_US. Is there a site that list all mirrors that carry the updates? I would like to find manually and adjust source.list file.
Does anyone have any idea what this is? I'm running F14 kernel 11-83, everything else is rock solid but I get this crash randomly, sometimes it runs for days no problem other times it crashes within a few hours.Someone recommended I run memtest86, I did for 24 hours and it showed no problems.
I recently installed two PC with debian lenny (kernel 2.6.26). One is called serveur-debian1 and the second one serveur-debian2. I have installed gnome,samba, mysql5, apache2, php5, and Virtualbox,bridge-tools on them. On serveur-debian2, i installed an other virtual debian lenny with apache2,mysql5,php5,nagios and centreon on it to view my network. I remember having installed a soft to access nntp on serveur-debian2 in order to test nagios.
Since a few days, i have problem to access to my servers. rom my windows 7 client, i try to ping serveur-debian1. Response is OK but not for all resquets Always from the same computer, i try to ping serveur-debian2. Response is OK but not for all again.
When i launch a ping on serveur-debian1 and serveur debian2 at the same time i have:
ping 1 to 10: serveur-debian1: response OK serveur-debian2: no response ping 11to 14: serveur-debian1: no response serveur-debian2: response OK ping 15 to 25: serveur-debian1: respone OK serveur-debian2: @ip serveur-debian1 network unreachable (there's no error, it shows me the ip of serveur-debian1)
If i switch on the debian virtual server on the serveur-debian2, and i ping it at the same time, the response is OK for all resquests. The problem is very strange. I can't have a correct connection and when i launch a request from a software which access the mysql server, the requests failed ...
I've been trying to install Opensuse 11.3 from the Kde live cd, but the installation hangs when I'm almost done. Right at the beginning the installation is interrupted right with text that among other things says:
Bug: unable to handle kernel paging request at ffffc90010b8000. After a while though, the installation picks up and continues by itself. I'm then able to complete the necessary steps and I reboot the system so that it can complete the installation.
After reboot there is a new text message that says that the bios does not support EEC memory or something to that effect and then continues with the installation. When it has completed 82% of the autoconfiguration the installation just stops and stays that way.
I've had no problem installing previous releases, from 10.2 up to 11.2, on the same machine.
I've checked md5 sum and also checked the media before proceeding with the installation.
Upon reboot after the first installation step, I also tried the failsafe mode but got the same result.
Here's the text from the serial console before I rebooted:
BUG: unable to handle kernel paging request at ffff8140320234b8 IP: [<ffffffff802b0a13>] dentry_iput+0x26/0x9d PGD 8063 PUD 0
My root server is using CentOS release 5.2 (Final), kernel 126.96.36.199-rootserver-20080917a, SMP, 64-bit This Oops happened yesterday and before that it happened on March 14th of this year, and before that on January 31st of this year, so a repeating pattern. On the January 31st Oops, I just rebooted. On the March 14th Oops, I reformatted the two swap partitions as follows: mkswap -c /dev/sda2; mkswap -c /dev/sdb2 On this last Oops, I turned off the swap for 24-hours, then decided to turn it on again after doing the above mkswap again. During the previous uptime, I had dumpcap packet capture running, but this last reboot, I'm not going to run it.
I'm trying to install Ubuntu on an Aspire laptop with Windows XP. I downloaded 10.04 and burned an ISO image. I boot Windows and open the ISO disk. I open the first choice which is to try Ubuntu prior to a complete installation. The installation starts and proceeds for a few minutes. Then it stops and displays a message 'Permission Denied' and a suggestion to check the installation log. The last few lines are:
I installed ubuntu 10.04 by wubi. It works perfect until I installed and ran "startupmanager". I find that I can't enter ubuntu, even in recovery mode. The screen keeps showing "rstslog main process ended, respawning [fail]" and other text
I'm working on a old piece of code on linux, after compiling without porblem at the execution I have this response:
src/xproject/xproject: Ok, a color display! :-) X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 78 (X_CreateColormap) Serial number of failed request: 7 Current serial number in output stream: 15
looking at the source code I think the problem is related at the depth of my system 24 bit and the depth of this old piece of code 8 bit. Unfortunately also I don't have experience in programming the XVideo and if someone can give me some help in programming the XVideo interface