Ubuntu Multimedia :: Using Rosegarden Under Maverick/changes From Lucid?
Sep 1, 2010
ok so i have been using rosegarden on lucid/karmic/jaunty
and i never used Jackd since it is to the non-highly-technical a remarkable pain in the butt
i compose entirely through midi and the sound has always played through timidity
see this reading from Lucid
Code:
JackDriver::initialiseAudio - JACK server not running
ALSA Client information:
14,0 - (Midi Through, Midi Through Port-0)(DUPLEX) [ctype 2, ptype 655362, cap 99]
128,0 - (TiMidity, TiMidity port 0)(WRITE ONLY) [ctype 1, ptype 2, cap 66]
[Code]....
View 9 Replies
ADVERTISEMENT
Oct 17, 2010
can we upgrade lucid to maverick by using maverick live cd. what are the other methods for upgradation
View 3 Replies
View Related
Jul 14, 2010
I want to use rosegarden purely for midi (i.e not audio, recording synths etc.) as my midi keyboard already has loads of great tones. When jackd is running, it really slows rosegardens performance, and the trouble is with the new rosegarden (10.04) jack is started automatically when you start rosegarden. Is there a way to prevent this? Please help, rosegarden is a great app but this is rather annoying. Uninstalling jack would be bad because other things I need use jack.
View 1 Replies
View Related
Sep 17, 2010
When I start Rosegarden, my computer freezes. No faillure reports, nothing. Tyan-Tiger K8W, two Opterons 250, 4 GB memory, OpenSUSE 11.3, Linux 2.6.34.4-0.1-desktop x86_64, KDE 4.4.4 "release 2".
View 9 Replies
View Related
Jul 15, 2010
I am trying to use rosegarden, but it says "midi fine, no audio". I found a thread with this same issue and that said to instal jackd and a synth. So I installed qsynth and tried to start jackd. When starting jackd i get this error:
10:16:50.399 Patchbay deactivated.
10:16:50.546 Statistics reset.
10:16:51.021 ALSA connection graph change.
10:16:51.287 ALSA connection change.
[Code]....
View 1 Replies
View Related
Jul 12, 2010
I want to experiment with Hydrogen, Rosegarden and other music apps it seems that jack is a useful program to do that. I have a standard install of Lucid. When I start Jack, it gives a message "suspending Pulseaudio The jack apps I am using have no sound. I assume that I need to set up an ALSA device to connect Jackd to? Is that correct?
[Note: I found these instructions for "running Pulseaudio on top of jack" [URL].. but they look more complicated than I need. I'm only using jack a little each day so I am fine with turning off Pulse during those times.]
What is the simplest way to get sound out of Jack apps? If it is to set up an ALSA device, how do I do that without interfering with Pulse which will be running the other 90% of the time? Or am I totally misunderstanding the setup?
View 3 Replies
View Related
Mar 5, 2011
Exactly as the topic says; running a MIDI file through Timidity in command-line works fine, but doing it in Rosegarden just outputs silence.
View 9 Replies
View Related
Dec 21, 2010
I have just finished installing Ubuntu Studio in my machine and downloaded and installed the Nvidia drivers. I was so excited about using the desktop visual effects that I had seen in some advertising. But first, I just found 3 options in the Appearences config none, normal and extra. Where are desktop effects such as windows trasparence, the cube an others?
Second, and worst, I enabled the "extra" options and found its effects pleasant, but I could not use the for any longer because when I launch Rosegarden with desktop effects enabled, Rosegarden's title screen appears and after that its windows doesn't appear. I found out that the problem is enabling desktop effects because when they are disabled Rosegarden starts completely in few seconds. I even made a test and enabled effects, launched Rosegarden, wich of course dind't appear, after that disabled effects and Rosegarden's window imediately appeared. I use this software every day and it was the main reason why I migrated to Ubuntu. How can I use Rosegarden and visual effects as well?
PS: My PC has Pentium dual core with 2 x 1,88, 3GB RAM and Nvidia Geforce 8400 GS. My system is Ubuntu Studio 10.10 with Rosegarden 10.10 installed from [URL]
View 4 Replies
View Related
Aug 18, 2010
Just wondering if anyone is using the Maverick kernel backport with Lucid? Just wanting to know how stable it is.
View 9 Replies
View Related
Oct 14, 2010
How to bond NICs in Ubuntu server 10.04/10.10 correctly.
I installed ifenslave-2.6 on a fresh install. Then I tried going into the /etc/network/interfaces file and adding a new entry for bond0 to the file and adding bond-mode 6, bond-miimon 100 and slaves eth1 eth2 to the end of the bond0 config.
That did not work, it keep telling me it cannot bring up the interface even after a reboot it still does not work.
I also followed some tutorial I found online about editing /etc/modprobe.d/aliases
That did not work really well either, the interface came up but had no slaves.
Can anyone give a clue or a current method to bond interfaces in the 10.04/10.10
View 9 Replies
View Related
Nov 9, 2010
I'm trying to setup a server for my home office, But I heard that using Maverick is not for office purpose and asked me to use Lucid instead.Should I download the Lucid version install it or do direct downgrade to Lucid?
View 4 Replies
View Related
Nov 28, 2010
Is there a simple way to revert to Lucid from Maverick on NBR? Just twiddling update/packages? Or must change back to lucidI do a whole clean install?
View 3 Replies
View Related
Apr 13, 2011
I installed Lucid in my laptop like this:
/sda1 - ntfs windows xp
/sda2 - /boot (ext4,350M)
/sda5 - / (31528.59M)
/sda6 swap (3,2g)
/sda4 - ntfs windows data, music etc.
After I installed 10.04, I installed following programs:
-Chromium BSU (game)
-Chromium - Brownser
-Xchat
Then I followe EXACTLY this guide:
[URL]
But NO UPGRADE button appears. How Can I upgrade, without and make a fresh install? I also tried in CLI to:
z@z-laptop:/$ lsb_release -a
No LSB modules are available.
Distributor ID:Ubuntu
[code]....
View 6 Replies
View Related
Apr 25, 2011
background now is gone (just a gray area) if i tick off show background in gconf-editor-->preferences--> show desktop (off) the wallpaper appears but desktop icons and volumes are gone.
View 9 Replies
View Related
Oct 28, 2010
there's a way to update the OS from 10.04 to 10.10 without having to redo my LiveCD or something? Also I was wondering if, in doing this I can save my old ubuntu account with all of the extra apps I downloaded, and my files?
View 2 Replies
View Related
Sep 28, 2010
I first noticed the disparity when I was moving some ISO files from Maverick to another partition. It was around 12-15 mb/s, where later I found Lucid to be around 30-50 mb/s.I then dropped into a VT and tried both from there, and discovered Maverick still much slower.thinking it may be the newer Nautilus, I re-booted and telinit 3, first using Maverick then Lucid.Lucid moved several gigabytes of data from one partition to another. It finished in "0m5.290s" where Maverick using the same computer and exact same data, moving to the exact same location "0m8.870s", Maverick being almost 60% slower.Not sure now where to look. Perhaps a newer library, or extra process being in use. Using telinit 3, I never loaded anything else. Is there any tools that can trace the moves.
View 5 Replies
View Related
Oct 11, 2010
i have a sony vaio VGN-NW150J laptop that was running lucid and had wireless no problem but when i upgraded to maverick i lost all functionality of my intel 5100 agn wireless card. when i run iwconfig this is what i get
Code:
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
and on bootup it flashes something about no suitable unicode found i can't get a good look at it maverick boot up too fast.
View 6 Replies
View Related
Oct 13, 2010
i had with it was nVidia HDMI playback but that wasnt hard to solve. Ive been using ubuntu since Karmic and except for the HDMI i had no problems.On the 10.10.10 i upgraded to Maverick from the terminal with "do-release-upgrade". I noticed that command while i was at a friends house SSH'ing back home. When i came back i ran the command and took me a few hours to upgrade.And to my suprise i encountered 3 problems (Karmic -> Lucid = Zero)...
1) I cant use a few PPA's at the moment but its livable with.
2) Compiz broken but i can wait. Maybe might compile it myself if i get tired of Metacity.
3) My /home partition got halved.The first 2... Just inconvenience.The 3rd... I got 900GB's allocated to my /home so im missing quite a lot of space. I do remember the system reporting before that i had 900GB's but now it just says 485GB's.Heres what fdisk and df report
Code:
lisiano@Lisiano-Ubuntu:~$ sudo fdisk -l /dev/sda
[sudo] password for lisiano:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes[code].....
I did reboot. The Restart Required icon is not lit either.
View 1 Replies
View Related
Oct 20, 2010
Is it possible to install the Maverick Meerkat over Lucid Lynx without losing third party programs and Document data on my Laptop?
View 3 Replies
View Related
Nov 6, 2010
Mentioned post - [URL]... I was/am also having the same problem that was described above and fixed it with either 'nomodeset' or 'i915.modeset=0', however, once I installed Gnome (part of the "Ultimate Server Guide"), I had one of the following happen...
-On Maverick, it would continue to boot in the console and running commands like startx would result in an error (no screen) -On Lucid, it stopped booting into the server all together (even with the above fixes). Once it boots into the server (about 6-7 seconds later), I'll see a bunch of reddish square artifacts on the screen and the HD activity will stop and the screen will remain on, but nothing will be displayed.
I've searched high and low for help on this and nothing seems to fix the problem. I consider myself very technical but my linux experience is only fair/good. Mostly from Unix experience in college and messing around with Ubuntu Desktop on my netbook.
View 5 Replies
View Related
Feb 26, 2011
An unresolvable problem occurred while calculating the upgrade:E:ErrorpkgProblemResolver::Resolve generated breaks, this may be caused byheld packages.This can be caused by: * Upgrading to a pre-release version of Ubuntu * Running the current pre-release version of Ubuntu * Unofficial software packages not provided by Ubuntu If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report.
View 1 Replies
View Related
Oct 5, 2010
The new NVIDIA drivers don't seem to work as seamlessly as back in Jaunty and before. In Lucid when I activated the drivers I had to do some grub tweaks to make my splash look normal... But with Maverick it is even more messed up...
Problem: The splash either doesn't appear at all (black screen) or it appears in the text format rather than graphics... In some instances it even hopelessly tried to load the graphics splash - loaded the background but the instead of Ubuntu logo and the progress-bar animation it displayed a "Ubuntu 10.10" in a monospace font.
View 1 Replies
View Related
Oct 24, 2010
in maverick the default package installer (when I double click on a .deb) is Ubuntu Software Centre, how can I make the default package installer from lucid (was it called "dpkg"?) the default again? Ubuntu Software Centre is too slow and freezes every time I click on something, can it be replaced?
View 2 Replies
View Related
Jan 9, 2011
I'm currently using Ubuntu Studio Lucid and would like to use Ubuntu Studio Maverick, but I'm unsure how to go about the upgrade. Should I upgrade to generic ubuntu maverick then upgrade to ubuntu studio? Or install ubuntu studio maverick from a DVD?? Or something else?? I should say that I have a separate /home partition.
[Edited because what I first wrote was confusing:] when I started the process of upgrading with Update Manager it said that quite a lot of things would be removed (it would be upgrading only to generic Ubuntu for one thing)---I aborted that by the way. I was wondering if anybody knew of a way to avoid having to first sort of note everything that I have installed, then do the upgrade to generic Ubuntu, then do an upgrade to Ubuntu Studio, then reinstall all of the apps in their newer versions. Might there be a way to upgrade the OS itself first and then just directly update the apps without having to reinstall them, figuring out what to install all over again too?
View 3 Replies
View Related
Feb 21, 2011
I have been using slackware for quite some time now and love installing software in it. Since you get to know whats actually going into your system adn all. Anyways I have been trying to download and install Rosegarden all day now. I installed all the dependencies listed here:
ladspa_sdk
dssi
liblo
liblrdf
[code]....
i have to physically stop it because my computer hangs up so bad and it sits like that for hours! Granted this is Rosegarden 10.04.1 but i have also installed 10.04.2 under my downloads section and ran into the same problem. Now i know that slack 13 dropped QT3 and went to QT4. Rosegarden 10.04.2 was supposed to run on QT4 but i get the same code and the same hang up every single time. No matter what version i try to install. I only tried 10.04.1 thinking that maybe it would work on the slack 13 kernel since thats the number that was for this build in slackbuild.org and 10.04.2 was in the 13.1 tree but neither of them install and just hang up on the computer. Is it a qt3 to a qt4 issue?
View 3 Replies
View Related
Mar 13, 2009
Anybody know the secret to get Rosegarden providing sound.
I got Jack and Hydrogen working but not Rosegarden.
Jack is working does Rosegarden really work?
View 2 Replies
View Related
Jun 5, 2010
I am trying to use Rosegarden but it does not see any midi ports. If I run LMMS it is able to see 20:UA-4F and 14:Midi Through. Jack sees them too. Furthermore, Rosegarden's transport does not even start, no synths availble. How to set rosegarden? (I am using Ubuntu 10.04 LTS - the Lucid Lynx)
View 1 Replies
View Related
Jan 21, 2011
The sound capability of ZynAddSubFX and Rosegarden's ability to use LADSPA along both Windows VST's and DSSI plugins like ZASF are simply excellent illustrations of Chris Cannam's ability to transform the chaotic mess of audio on Linux into something sonically and visually!
[code]....
An incredible combination ... which doesn't even address the ability to produce stellar musical documents as well... I'll probably move my comments on adapting this combination for Slackware64 from the Desktop thread to here ...
View 6 Replies
View Related
Oct 13, 2010
Having an issue with A2DP in Maverick.
Whenever I connect my headset, both 'Headset Service' and 'Audio Sink' are shown as being connected. I'm only getting mono audio.
I tried clicking disconnect on 'Headset Service' but it disconnect both. Selecting connect on 'Audio Sink' also connect 'both' and gives mono output.
View 8 Replies
View Related
Nov 8, 2010
I use maverick 64bit and banshee crashes a few seconds after I start the program, this is what I get:
"Got a SIGSEGV while executing native code. This usually indicates a fatal error in the mono runtime or one of the native libraries used by your application."
I deleted the banshee folder in .configure but every time the library is loaded the problem starts again.
View 5 Replies
View Related
