Ubuntu Servers :: NIC Bonding With Lucid/Maverick
Oct 14, 2010
How to bond NICs in Ubuntu server 10.04/10.10 correctly.
I installed ifenslave-2.6 on a fresh install. Then I tried going into the /etc/network/interfaces file and adding a new entry for bond0 to the file and adding bond-mode 6, bond-miimon 100 and slaves eth1 eth2 to the end of the bond0 config.
That did not work, it keep telling me it cannot bring up the interface even after a reboot it still does not work.
I also followed some tutorial I found online about editing /etc/modprobe.d/aliases
That did not work really well either, the interface came up but had no slaves.
Can anyone give a clue or a current method to bond interfaces in the 10.04/10.10
View 9 Replies
ADVERTISEMENT
Nov 9, 2010
I'm trying to setup a server for my home office, But I heard that using Maverick is not for office purpose and asked me to use Lucid instead.Should I download the Lucid version install it or do direct downgrade to Lucid?
View 4 Replies
View Related
Oct 17, 2010
can we upgrade lucid to maverick by using maverick live cd. what are the other methods for upgradation
View 3 Replies
View Related
Aug 18, 2010
Just wondering if anyone is using the Maverick kernel backport with Lucid? Just wanting to know how stable it is.
View 9 Replies
View Related
Sep 1, 2010
ok so i have been using rosegarden on lucid/karmic/jaunty
and i never used Jackd since it is to the non-highly-technical a remarkable pain in the butt
i compose entirely through midi and the sound has always played through timidity
see this reading from Lucid
Code:
JackDriver::initialiseAudio - JACK server not running
ALSA Client information:
14,0 - (Midi Through, Midi Through Port-0)(DUPLEX) [ctype 2, ptype 655362, cap 99]
128,0 - (TiMidity, TiMidity port 0)(WRITE ONLY) [ctype 1, ptype 2, cap 66]
[Code]....
View 9 Replies
View Related
Nov 28, 2010
Is there a simple way to revert to Lucid from Maverick on NBR? Just twiddling update/packages? Or must change back to lucidI do a whole clean install?
View 3 Replies
View Related
Apr 13, 2011
I installed Lucid in my laptop like this:
/sda1 - ntfs windows xp
/sda2 - /boot (ext4,350M)
/sda5 - / (31528.59M)
/sda6 swap (3,2g)
/sda4 - ntfs windows data, music etc.
After I installed 10.04, I installed following programs:
-Chromium BSU (game)
-Chromium - Brownser
-Xchat
Then I followe EXACTLY this guide:
[URL]
But NO UPGRADE button appears. How Can I upgrade, without and make a fresh install? I also tried in CLI to:
z@z-laptop:/$ lsb_release -a
No LSB modules are available.
Distributor ID:Ubuntu
[code]....
View 6 Replies
View Related
Apr 25, 2011
background now is gone (just a gray area) if i tick off show background in gconf-editor-->preferences--> show desktop (off) the wallpaper appears but desktop icons and volumes are gone.
View 9 Replies
View Related
Oct 28, 2010
there's a way to update the OS from 10.04 to 10.10 without having to redo my LiveCD or something? Also I was wondering if, in doing this I can save my old ubuntu account with all of the extra apps I downloaded, and my files?
View 2 Replies
View Related
Sep 28, 2010
I first noticed the disparity when I was moving some ISO files from Maverick to another partition. It was around 12-15 mb/s, where later I found Lucid to be around 30-50 mb/s.I then dropped into a VT and tried both from there, and discovered Maverick still much slower.thinking it may be the newer Nautilus, I re-booted and telinit 3, first using Maverick then Lucid.Lucid moved several gigabytes of data from one partition to another. It finished in "0m5.290s" where Maverick using the same computer and exact same data, moving to the exact same location "0m8.870s", Maverick being almost 60% slower.Not sure now where to look. Perhaps a newer library, or extra process being in use. Using telinit 3, I never loaded anything else. Is there any tools that can trace the moves.
View 5 Replies
View Related
Oct 11, 2010
i have a sony vaio VGN-NW150J laptop that was running lucid and had wireless no problem but when i upgraded to maverick i lost all functionality of my intel 5100 agn wireless card. when i run iwconfig this is what i get
Code:
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
and on bootup it flashes something about no suitable unicode found i can't get a good look at it maverick boot up too fast.
View 6 Replies
View Related
Oct 13, 2010
i had with it was nVidia HDMI playback but that wasnt hard to solve. Ive been using ubuntu since Karmic and except for the HDMI i had no problems.On the 10.10.10 i upgraded to Maverick from the terminal with "do-release-upgrade". I noticed that command while i was at a friends house SSH'ing back home. When i came back i ran the command and took me a few hours to upgrade.And to my suprise i encountered 3 problems (Karmic -> Lucid = Zero)...
1) I cant use a few PPA's at the moment but its livable with.
2) Compiz broken but i can wait. Maybe might compile it myself if i get tired of Metacity.
3) My /home partition got halved.The first 2... Just inconvenience.The 3rd... I got 900GB's allocated to my /home so im missing quite a lot of space. I do remember the system reporting before that i had 900GB's but now it just says 485GB's.Heres what fdisk and df report
Code:
lisiano@Lisiano-Ubuntu:~$ sudo fdisk -l /dev/sda
[sudo] password for lisiano:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes[code].....
I did reboot. The Restart Required icon is not lit either.
View 1 Replies
View Related
Oct 20, 2010
Is it possible to install the Maverick Meerkat over Lucid Lynx without losing third party programs and Document data on my Laptop?
View 3 Replies
View Related
Nov 6, 2010
Mentioned post - [URL]... I was/am also having the same problem that was described above and fixed it with either 'nomodeset' or 'i915.modeset=0', however, once I installed Gnome (part of the "Ultimate Server Guide"), I had one of the following happen...
-On Maverick, it would continue to boot in the console and running commands like startx would result in an error (no screen) -On Lucid, it stopped booting into the server all together (even with the above fixes). Once it boots into the server (about 6-7 seconds later), I'll see a bunch of reddish square artifacts on the screen and the HD activity will stop and the screen will remain on, but nothing will be displayed.
I've searched high and low for help on this and nothing seems to fix the problem. I consider myself very technical but my linux experience is only fair/good. Mostly from Unix experience in college and messing around with Ubuntu Desktop on my netbook.
View 5 Replies
View Related
Feb 26, 2011
An unresolvable problem occurred while calculating the upgrade:E:ErrorpkgProblemResolver::Resolve generated breaks, this may be caused byheld packages.This can be caused by: * Upgrading to a pre-release version of Ubuntu * Running the current pre-release version of Ubuntu * Unofficial software packages not provided by Ubuntu If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report.
View 1 Replies
View Related
Oct 5, 2010
The new NVIDIA drivers don't seem to work as seamlessly as back in Jaunty and before. In Lucid when I activated the drivers I had to do some grub tweaks to make my splash look normal... But with Maverick it is even more messed up...
Problem: The splash either doesn't appear at all (black screen) or it appears in the text format rather than graphics... In some instances it even hopelessly tried to load the graphics splash - loaded the background but the instead of Ubuntu logo and the progress-bar animation it displayed a "Ubuntu 10.10" in a monospace font.
View 1 Replies
View Related
Oct 24, 2010
in maverick the default package installer (when I double click on a .deb) is Ubuntu Software Centre, how can I make the default package installer from lucid (was it called "dpkg"?) the default again? Ubuntu Software Centre is too slow and freezes every time I click on something, can it be replaced?
View 2 Replies
View Related
Jan 9, 2011
I'm currently using Ubuntu Studio Lucid and would like to use Ubuntu Studio Maverick, but I'm unsure how to go about the upgrade. Should I upgrade to generic ubuntu maverick then upgrade to ubuntu studio? Or install ubuntu studio maverick from a DVD?? Or something else?? I should say that I have a separate /home partition.
[Edited because what I first wrote was confusing:] when I started the process of upgrading with Update Manager it said that quite a lot of things would be removed (it would be upgrading only to generic Ubuntu for one thing)---I aborted that by the way. I was wondering if anybody knew of a way to avoid having to first sort of note everything that I have installed, then do the upgrade to generic Ubuntu, then do an upgrade to Ubuntu Studio, then reinstall all of the apps in their newer versions. Might there be a way to upgrade the OS itself first and then just directly update the apps without having to reinstall them, figuring out what to install all over again too?
View 3 Replies
View Related
Jan 7, 2011
I'm attempting to get svn over apache running on maverick server. Here is my site config
Code:
<VirtualHost *:80>
ServerName common.subversion.xxx.xxx
ServerAdmin xxxxxxx
DocumentRoot /var/www/SVN
AddExternalAuth pwauth /usr/sbin/pwauth
SetExternalAuthMethod pwauth pipe
[Code]...
While the redhat posts indicated selinux, when I checked it with sestatus (after first installing sestatus), it came back disabled. So what is locking down the /var/www directory?
View 1 Replies
View Related
Jun 9, 2011
how do I connect to a PPTP VPN (router) using Ubuntu server (Maverick/Natty)?
View 3 Replies
View Related
Nov 12, 2010
sometimes when transferring large files using scp between my desktop running maverick and other servers running Ubuntu, Debian or CentOS, I get the following error message: 77% 258MB 11.3MB/s 00:06 ETAReceived disconnect from xxx.xxx.xxx.xxx: 2: Packet corruptI've found a seemingly related bug report on launchpad here: but the provided "ethtool" fix did not help. I'd be most grateful for any ideas on how to solve this issue. Some more info:Linux lotus 2.6.35-22-generic-pae #35-Ubuntu SMP Sat Oct 16 22:16:51 UTC 2010 i686 GNU/Linuxlspci | grep eth -i00:19.0 Ethernet controller: Intel Corporation 82567LM-3 Gigabit Network Connection (rev 02)
View 1 Replies
View Related
Apr 30, 2011
I upgraded my dedicated server using the do-release-upgrade command, and it seems to have installed many extra packages I do not require. This is a headless server in a datacentre, yet the upgrade caused me to install GUI packages I do not need. Is there a way to quickly remove all but the default server packages?
View 1 Replies
View Related
Feb 16, 2010
I've run across a few threads in the archived forums regarding nic bonding. I could be wrong but I imagine most of the people that are looking at bonding are probably really wanting what they would get out of creating a LAG between their Ubuntu Server and a managed switch capable of LACP trunks. If you have two NICS on your ubuntu server and want 2gps throughput & failover check out the page on creating a LAG. Obviously this requires your switch to be compatible though. [URL]...
View 1 Replies
View Related
May 7, 2010
How to install Bugzilla 3.6 on Ubuntu Lucid 10.4 through the Advanced Packaging Tool(apt-get install) ???
View 4 Replies
View Related
May 25, 2010
I'm trying to install 10.04 server into a virtual machine using virtualbox. When I start the virtual machine and try to install using the server ISO, I get the following error:
Code:
This kernel requires an x86-64 CPU, but only detected an i686 CPU. Unable to boot Here is my cpuinfo from lshw:
Code:
*-cpu:0
description: CPU
product: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+
[Code]...
The host OS is 32bit Lucid Lynx desktop, and virtualbox works fine with a Win7 guest. Does anyone know why this might be happening?
View 6 Replies
View Related
Jun 6, 2010
server configuration: SCSI 36gig -> sdd; boot and root as it was first in the box;2 IDE hard drives -> sda/sdb for data; and1 SATA drive -> sdc for data.After upgrading to Lucid (not right away, but a bit later), it stopped booting:'Gave up waiting for root device.'ALERT! /dev/disk/by-uuid/........... does not exist. Dropping to a shell!(initramfs)Happily, pushing ^D let it resume booting, but it kept repeating. After some study, I found the Lucid release notes that said "if you upgrade to ext4, you have to manually update Grub". A quick check showed that sdd was now, indeed ext4 - nobody told me! And, why couldn't it update Grub by itself? But, I dutifully ran grub-install and life went back to normal.
Until last night, when I updated the kernel, etc. with apt-get and restarted, and grub dropped dead:More googling turned up this solution, which I used with an install CD:http://tinyurl.com/2dhswzzWhich worked, but it brought back the first problem, and running grub-install doesn't fix it. So, what do I do now?
View 5 Replies
View Related
Jul 28, 2010
I'd like to upgrade libssl to 0.9.8l version on my Lucid-based server, because of CVE-2009-3555 - they say that 0.9.8l disables SSL renegotiation, fixing the security issue. But there is no 0.9.8l in Ubuntu repositories - only 0.9.8k-7 is available. how can I upgrade this library? BTW. it is really strange why such significant security fix is not available in Ubuntu repositories. why it is not available?
View 9 Replies
View Related
May 11, 2010
I would like to disable the ctrl-alt-del feature for a Lucid Lynx server.
i found some info on how to enable this in desktop environments, however nothing explaining how to disable it for a server.
View 3 Replies
View Related
May 13, 2010
I googled around and can't seem to find the solution to this problem... Ok, I have a server that used to run openSuSE until last week . From it, I ran my shop's website as well as a dokuwiki installation in the same folder as the basic web site:
- DocumentRoot is /var/www/htdocs
- The wiki is /var/www/htdocs/dokuwiki
So, this worked: [URL] Than I move to 10.04 Server... I transfer my web material into /var/www/htdocs, modify the default config in sites-availables and restart apache. What I now see:
[Code]....
View 2 Replies
View Related
Jul 2, 2010
I want to pull a couple of packages from Debian Testing, but I can not get apt pinning to lower the testing repo's priorityI add the testing repo to the bottom of /etc/apt/sources.lst.I then add this in /etc/apt/preferences but when I do 'sudo aptitude update' and then 'sudo aptitude full-upgrade', it wants to upgrade all packages to the versions in debian testing.
View 5 Replies
View Related