I am trying to use rosegarden, but it says "midi fine, no audio". I found a thread with this same issue and that said to instal jackd and a synth. So I installed qsynth and tried to start jackd. When starting jackd i get this error:
10:16:50.399 Patchbay deactivated.
10:16:50.546 Statistics reset.
10:16:51.021 ALSA connection graph change.
10:16:51.287 ALSA connection change.
[Code]....
I try it for the first time. Befor I changed to linux I used MS Windows 7. There I worked much with SonyVegas for video and Adobe Auditon for music. Yesterday I searched for alternatives under Linux for Audition. And I found much. The screen shots says, that they look similar to Auditon. I downloaded them and installed them. But they doesn't work. One of them say they can't connect to Jack. Some of them say nothing, and so they don't record my line in/microphone input. After a few seconds I of search, I knew that all of these programs uses jack for Audio. I installed it, but the situation wasn't better. Then I found a wiki, and try that: first start jack, than start the program. So I do. But there i get a few error messages: At first I should copy to lines to the file lines.conf. I do it. Then I should be member of the audio group. I do that.
[Code]...
Im a composer and I loaded up on some excellent applications for music creation and notation- so excited..
I start with Rosegarden. Failed to connect to JACK audio server. Try my other applications, same problem.
Basically the JACK audio server just WILL NOT RUN (correctly). I can sudo it and press start, but still it wont "play with" the applications! Heres the error message from JACK (I also get related errors when I try to do ANYTHING involving music creation):
error JACK Audio Connection Kit
-overall operation failed
-unable to connect to server
Here is the "fatal error" from MusE
"Failed to Find Jack Audio Server"
This is the JACK output:
[Code]...
i am using ubuntu 11.04 trying get working Internet DJ Console but i am experiencing problem to connect to the Jack server
i already checked the intructions given in the idjc project webpage, installing the application and configuring the jack
i had already properly set the correct sound card chipset name(snd-hda-intel) on the kermel module and configured to load everytime is boot
installed all the dependecies for jack...but i am still not knowing what i am doing wrong
here i am going to post the info when i try load the application on the terminal:
root@ubuntu:~# sudo echo "@audio - rtprio 100" >> /etc/security/limits.conf
root@ubuntu:~# sudo echo "@audio - nice -10" >> /etc/security/limits.conf
root@ubuntu:~# echo "/usr/bin/jackd -d alsa -r 44100 -p 256" > ~/.jackdrc
root@ubuntu:~# idjc
[Code].....
I've got an Acer Aspire 5101 with Natty on it and everything works so far, but I can't start Muse. It says: "Muse failed to find a jack audio server". At the bottom it also says: "...if Jack was started check if it was started as the same user as Muse". This might be the issue. But how can I check this? BTW: Jackd has been installed and I am a Member of the Audio Group.
I am new to Ubuntu and don't know how to fix this. I got this Notebook for free, because my Brother wanted to dispose it as it didn't worked properly after he reinstalled xp. Only the dvd-drive is broken, the rest is in really good condition for such an old thing. After a lot of trial and error I could finally install Natty from USB.
I got the following message when starting the Jack Control.
Could not connect to JACK server as client.
- Overall operation failed.
- Unable to connect to server.
Please check the messages window for more info
15:25:37.902 Patchbay deactivated.
15:25:37.903 Statistics reset.
15:25:38.020 ALSA connection graph change.
15:25:38.216 ALSA connection change.
15:25:39.777 Startup script...
15:25:39.779 artsshell -q terminate
sh: artsshell: not found
15:25:40.182 Startup script terminated with exit status=32512.
15:25:40.183 JACK is starting...
15:25:40.183 /usr/bin/jackd -R -dalsa -dhw:0 -r44100 -p1024 -n2
15:25:40.190 JACK was started with PID=2052.
no message buffer overruns
jackd 0.116.1
I'm trying to record video of a game I am playing. I am using gtk-recordmydesktop but it records the audio from my mic. This is obviously not what I want. The apparent solution was jack, but I've been having a hard time getting it to run. According to #fedora I was told to get qjackctl and jack capture. When I try to run qjackctl and click the "start" button I get this long nasty error:
Code:
15:11:41.006 Patchbay deactivated.
15:11:41.008 Statistics reset.
15:11:41.024 ALSA connection graph change.
15:11:41.240 ALSA connection change.
15:11:42.091 Startup script...
15:11:42.091 artsshell -q terminate
15:11:42.532 Startup script terminated with exit status=256.
15:11:42.533 JACK is starting...
15:11:42.533 /usr/bin/jackd -R -dalsa -dhw:0 -r48000 -p1024 -n2
15:11:42.538 JACK was started with PID=4302.
*** buffer overflow detected ***: /usr/bin/jackd terminated .....
15:11:42.589 JACK has crashed.
jackd: no process killed
15:11:43.015 Post-shutdown script terminated with exit status=256.
15:11:44.683 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info.
JACK will not run ( eg. the server just won't go! ) When running Rosegarden I can not access the Qsynth/Fluidsynth.In the Rosegarden "manage MIDI devices" menu it now shows ONLY one "General Midi Device" -thats all, and I do not know where to/how to get access to qsynth/fluidsynth to use soundfontsIn manage midi devices I ONLY get the option of "general midi"and then its only through "14:0 Midi through port 0 (duplex)" and no
other channels are available or offered!If I import one of the devices that come with rosegarden ( like Aleisis ) there is no sound.
Also if anyone knows: (& if I can fix the above) how do I set Rosegarden to use a software synth like ZynAddSubFX on the track/channel? External softsynths do not show up, so how do I assign the channel to use them>
Ps: Rosegarden did not install with the help files, even a complete removal and reinstall does not fix this- hats why I may be asking questions which could possibly be in the Rosegarden manual ( but NOT anywhere online that I've found in 3 days of searching- and I'm a research assistant for cognitive sciences- eg: good at researching! )
Here's the JACK output:
First the error:
COULD NOT CONNECT TO JACK SERVER AS CLIENT
-Overall operation failed
-Unable to connect to server
Heres the message window output:
p, li { white-space: pre-wrap; } 10:39:56.296 Patchbay deactivated.
10:39:56.478 Statistics reset.
10:39:56.549 Startup script...
10:39:56.549 artsshell -q terminate
[code]....
Muse will not make sound. The jack server is running, but not from the terminal. I can only get it to run with the Jack control. But it IS running. And still, I hear no sound from muse.Muse is connected to the system in the connection window.So, whats the problem?
View 3 Replies View RelatedI want to use rosegarden purely for midi (i.e not audio, recording synths etc.) as my midi keyboard already has loads of great tones. When jackd is running, it really slows rosegardens performance, and the trouble is with the new rosegarden (10.04) jack is started automatically when you start rosegarden. Is there a way to prevent this? Please help, rosegarden is a great app but this is rather annoying. Uninstalling jack would be bad because other things I need use jack.
View 1 Replies View Relatedok so i have been using rosegarden on lucid/karmic/jaunty
and i never used Jackd since it is to the non-highly-technical a remarkable pain in the butt
i compose entirely through midi and the sound has always played through timidity
see this reading from Lucid
Code:
JackDriver::initialiseAudio - JACK server not running
ALSA Client information:
14,0 - (Midi Through, Midi Through Port-0)(DUPLEX) [ctype 2, ptype 655362, cap 99]
128,0 - (TiMidity, TiMidity port 0)(WRITE ONLY) [ctype 1, ptype 2, cap 66]
[Code]....
When I start Rosegarden, my computer freezes. No faillure reports, nothing. Tyan-Tiger K8W, two Opterons 250, 4 GB memory, OpenSUSE 11.3, Linux 2.6.34.4-0.1-desktop x86_64, KDE 4.4.4 "release 2".
View 9 Replies View RelatedI can't get jack working
soundcard chipset: EMU10k1X
Here Qjackctl log:
Code:
p, li { white-space: pre-wrap; } JACK server starting in non-realtime mode
Cannot lock down memory area (Cannot allocate memory)
control device hw:0
control device hw:0
audio_reservation_init
Acquire audio card Audio0 .....
jack server is not running or cannot be started
already added
@audio - rtprio 99
@audio - memlock unlimited
@audio - nice -19
to
/etc/security/limits.conf
I am member of audio group. Realtime option unchecked. I also reinstalled ubuntu in a fresh install and the same problem.
I want to experiment with Hydrogen, Rosegarden and other music apps it seems that jack is a useful program to do that. I have a standard install of Lucid. When I start Jack, it gives a message "suspending Pulseaudio The jack apps I am using have no sound. I assume that I need to set up an ALSA device to connect Jackd to? Is that correct?
[Note: I found these instructions for "running Pulseaudio on top of jack" [URL].. but they look more complicated than I need. I'm only using jack a little each day so I am fine with turning off Pulse during those times.]
What is the simplest way to get sound out of Jack apps? If it is to set up an ALSA device, how do I do that without interfering with Pulse which will be running the other 90% of the time? Or am I totally misunderstanding the setup?
Exactly as the topic says; running a MIDI file through Timidity in command-line works fine, but doing it in Rosegarden just outputs silence.
View 9 Replies View RelatedI have just finished installing Ubuntu Studio in my machine and downloaded and installed the Nvidia drivers. I was so excited about using the desktop visual effects that I had seen in some advertising. But first, I just found 3 options in the Appearences config none, normal and extra. Where are desktop effects such as windows trasparence, the cube an others?
Second, and worst, I enabled the "extra" options and found its effects pleasant, but I could not use the for any longer because when I launch Rosegarden with desktop effects enabled, Rosegarden's title screen appears and after that its windows doesn't appear. I found out that the problem is enabling desktop effects because when they are disabled Rosegarden starts completely in few seconds. I even made a test and enabled effects, launched Rosegarden, wich of course dind't appear, after that disabled effects and Rosegarden's window imediately appeared. I use this software every day and it was the main reason why I migrated to Ubuntu. How can I use Rosegarden and visual effects as well?
PS: My PC has Pentium dual core with 2 x 1,88, 3GB RAM and Nvidia Geforce 8400 GS. My system is Ubuntu Studio 10.10 with Rosegarden 10.10 installed from [URL]
After installing I was not able to get many of the audio programmes to work. After some reading, I realised that this was probably due to jack not starting.
I was unable to get jack to start normally but have been able to get it started with the playback only option selected. Programmes that use jack now work, however there is no sound once jack has been started. The sound does work in other programs when jack is not started. Strangely, I only have to open qjackctl for the sound to stop, and jack is not even started. Initially I thought these problems were due to my sound card not being supported, but I believe that alsa support was added for the via 1708 codec at some point. I found that support had been added in a document showing the changes between alsa versions; however I cannot find the exact model listed as a supported sound card on the alsa site.
I believe that altering jack settings could fix the problem, as i have been able to get audio to work in hydrogen by selecting plughw:0 but there is still no sound in other programs. I have tried altering many other settings but to no avail, however I do not really understand the meaning of the settings that i am adjusting.
Does anyone know what settings to adjust or know something else that might fix this problem so that sound works once jack has been started?
Also, would programmes that use jack such as audacity, hydrogen, and ardour work with pulseaudio as the main sound server if I were to install normal ubuntu - it might be worth seeing if my soundcard works with the puleaudio sound server
if this helps, here is the error message received when jack does not start when the normal duplex option is selected.
21:24:04.867 Patchbay deactivated.
21:24:04.868 Statistics reset.
21:24:04.886 ALSA connection change.
Cannot connect to server socket err = Connection refused
[Code].....
also, when i open alsamixer in the terminal for some reason the headphone part is greyed out, even when the sound is working before qjackctl is opened.
I'm trying to setup PS3 media server on my new OpenSuse 11.2 and I'm being unable to connect to the PS3. The multimedia server seems to being working ok, only it has not appear on XMB.
I've been searching on PS3 Media Server forums and try a couple of solutions regarding /etc/hosts and adding full qualified domain name of server to it, but it doesn't seems to work.
For starters; although I am comfortable with Ubuntu, I don't really understand these midi and jack things,Ok,so I got a midi controller keyboard which I want to connect to my ubuntu pc to start making some music (play piano and possibly try to make some songs). I don't know if my sound card supports midi, but I got a Roland midi-to-usb converter. I connected it to my pc and downloaded Jack Control. When I fire up Jack control my normal music (using audacious) stops (don't know if this is normal). On the window that appears I hit start which results in an error, which I will paste below:
Code:
22:46:06.556 Patchbay deactivated.
22:46:06.560 Statistics reset.
[code]....
I have an ESI Gigaport HD USB external soundcard which I'd like to use via Jack with my Thinkpad T40 running Ubuntu 9.04.This is the card, it has no inputs and 8 x outputs:
[URL]
The card is autodetected on plug in. I can see the 8 x outputs in the Jack connection window but I can't run any sound to it. Anything I connect to it on any of the 8 channels is silent.
I had Ubuntu 10.4 installed and JACK was working excellent. I noticed that gnome was a little more than what I needed so I installed the xubuntu-desktop package. After that install JACK no longer works... I run the command jackd -d alsa and I get a bus error. I did a new install from an xubuntu iso and same error.
View 4 Replies View RelatedSame as above. I've fiddled around, but I can't get Rosebud to work. I have Qsynth, ZynAddSubFX Synth, JACK control, and Rosebud but I can't get any of it to work
View 9 Replies View RelatedCan't get jack to work. Installed from synaptic (running ubuntu 10.10, 64bit).
WHen ckicking "start" in qjackctl (jack control) I keep getting this message:
19:27:58.615 Patchbay deactivated.
19:27:58.616 Statistics reset.
Cannot connect to server socket err = No such file or directory
Cannot connect to server socket
jack server is not running or cannot be started
[Code].....
I just realize that when I plug in my headphones in my laptop, the sound in the laptop's speakers continues to play and I have no sound on the headphones. This is the output of the 'sudo lshw -C sound' on my system:
*-multimedia UNCLAIMED
description: Audio device
product: nVidia Corporation
vendor: nVidia Corporation
physical id: 0.1
bus info: pci@0000:01:00.1
version: a1
width: 32 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: latency=0
resources: memory:d3000000-d3003fff .....
Why do this? Two reasons:
1) Many of us use JACK for low-latency audio work, but it's annoying to have to turn it on or off to have to allow regular Ubuntu applications to work. It's even more annoying that both can't normally work together -- either JACK or PulseAudio must take control of the sound control. This method allow JACK to do, and PulseAudio just routes to JACK.
2) JACK is kinda super awesome. By routing PulseAudio through it, your regular Ubuntu sound application suddenly get super powers. Pretty easy to do! (Well, we count our blessings in Linux...)
1. DYNAMICALLY You need the PulseAudio utilities and JACK sink:
Code:
sudo aptitude install pulseaudio-utils pulseaudio-module-jack And then run this to get PulseAudio connected to JACK: Code:pactl load-module module-jack-sink pactl load-module module-jack-source Now, go to Ubuntu's sound preferences, and you'll see "Jack sink" in the output tab. If you use JACK Control, you can create a script for the above and have it set up in "Execute script after Startup". Then, PulseAudio will automatically load the JACK sink when you start JACK.
2. BY DEFAULT Edit /etc/pulse/default.pa, and add these lines:
Code:load-module module-jack-source load-module module-jack-sink You can test it without rebooting by restarting PulseAudio. In Ubuntu, PulseAudio is started in the user session, not as a system daemon. To restart it:
Code:
pulseaudio --kill
pulseaudio --start
I can not get sound to exit from my headphone jack, whenever I plug it in, no sounds come out. Notebook model is Acer 3820TG. By the way, I've tried adding the line for HDA Intel with udo gedit /etc/modprobe.d/alsa-base.conf
[code]...
I have a little issue.
I have netbook Asus EEE PC 1001PX (he's got only one jack for headphone and mic, i dont' know how this could work... but anyway)
I have no sound from headphone, from speakers is ok.
I've already edit /etc/modprobe.d/alsa-base.conf and insert the options snd-hda-intel model=asus at the bottom, still nothing.
I've try also to uninstal linux-backports-wireless... and still nothing.
Card: Intel HDA.
Jack runs, but I can't get sound to play through it. Another thing that happens is when I launch jack, all audio in the system, whether its connected to jack or not, goes off. There are no errors or anything in the messages window. And I checked to see if it was connected to the correct interface. I have a mac mini and I run ppc lucid lynx. The system does detect my hardware, and its not muted. All I want to do is use MusE. Is there maybe anyway to run MusE without jack?
View 3 Replies View RelatedI finally ditched PulseAudio and set up my system with a realtime kernel. I'm redirecting ALSA over JACK. The good: - Awesome, I can get <5ms latency without any xruns! (although 23.2 msec as described below is just fine for me) The bad: - I'm a long-time linux audio user, but have got some minor issues which spoil the fun.
1. Without pulseaudio, the indicator applet refuses to show a volume control applet. The old gnome-volume-control-applet (the one with tooltip!) loads but doesn't show in the gnome-panel. Although I can set the volume with envy24control, it's not quite as practical as using the scrollwheel! Any way to fix this?
2. When I launching any application (such as a terminal) from the gnome-panel, a new JACK connection is created, but not cleaned up after closing the application. As a result, the QJackCtl connection list is flooded with alsa-jack.jackP.8528.xx connections (where 8528 is the process ID of gnome-panel). The jack_lsp command line program shows the same (added spaces after every : to get around the smiley filter):
[Code].....
I am trying to set my computer up to do sound sequencing. I want to plug my MIDI keyboard in and record with a sequencer. Running 10.04, was following a tutorial on installing JACK, and my audio stopped working. Since then, I've gone through all guides I can find, some advising an upgrade of ALSA, some saying to use OCC. I've tried both, but nothing seems to work.
I suspect it may have something to do with libjack0. I could not install jackd because it claimed libjack0 to be the wrong version, and for some reason I couldn't upgrade. So I uninstalled libjack0, then installed jackd, which automatically included the version of libjack0 it wanted. After that, I could get the JACK server running, but the computer had no sound.
I will post whatever logs or information necessary to troubleshoot, but I don't know exactly how or what to post. If you need logs, please tell me how to get them.
