Ubuntu Multimedia :: Unable To Fast Forward Audio File / Enable This?
Jan 4, 2010
Just did a fresh install of Karmic, got all necessary decoders installed for video and audio playback...I think.
Problem is I can't forward/search in audio files I am playing. I mean I can only Play, Pause, Stop or "Next-track" a music file. Video files are fine.
I've tried Exaile, Rythmbox and even Totem. It is like the audio files are "half read-only".
If I drag a horizontal scroller in the music player and let it go, it will only jump back to the position where it is actually playing.
Has anyone experienced, this? I am a missing something in gstreamer or something like it?
View 4 Replies
ADVERTISEMENT
Oct 6, 2010
Is it possible (by command line) to move forward to a time point in an audio file?
View 3 Replies
View Related
May 23, 2010
I just(4 hours ago at this writing) installed 10.04 LTS LL on my Toshiba Satellite. I transfered a few albums from my external HDD, to my laptop, and opened Rhythmbox. First, as usual with a new install, I had to dl Gstreamer, and some other plugins, to allow the program to properly play mp3's. This was done with no problems, of any kind, but I then found that, once a song began to play, I was unable to skip ahead in the track.
View 2 Replies
View Related
Aug 23, 2010
videos/hulu/etc. are suddenly screwed up. i get no sound and the videos all play in fast forward. i'm assuming i missed the solution to this in one of the many ginormous threads on here...can anyone point me in the right direction?
View 1 Replies
View Related
Mar 4, 2011
After working properly for over a year my videos started playing in fast forward. This can be on the internet (as in wwww.wimp.com) or my video clips located on my hard drive.
Also, on a different note my volume control stopped working. My keyboard has a volume control wheel that I used to use to control the volume of music and videos. First it gave out on my side and continued to work on my wife's side and now it doesn't work on ether. (the volume level bar pops up on the screen but doesn't affect the output) (The volume can still be controlled with the mouse though by clicking on the volume bar on whatever web page I am looking at.)
View 6 Replies
View Related
May 16, 2010
I am unable to play audio CDs. I have 2 CD drives and upon insertion of of a CD into the top drive, it notices the CD and asks what I want to do... Play with Kaffeine results in it opening, but then nothing happens. When I do the same thing with the CD in the bottom drive, it plays the first track of the CD but nothing else. Every time. With different CDs.
View 1 Replies
View Related
Jan 5, 2010
I am "fleshing out" my USB flash drive Netbook Remix of Ubuntu and have run into a snag on getting Mplayer Movie Encoder to work. Synaptics eventually showed 28 new packages will be installed which was done. But, the skin showing the "controls" (fast forward, pause etc) is dead. I am using the USB flash on a HP desktop and all other Remix features work well. Plus the Nvidea gui card fills my 19" flat screen exquisitely well. And, the stick works very nicely on my Acer Netbook (aspire one 250) too.
View 2 Replies
View Related
Sep 3, 2010
i followed this thread and got mediatomb on my ubuntu 10.04 lucid running. i have a samsung UE-32B7020 tv.
the only problem is that for .avi and .mp4 movies (these are the ones i tried), fast forward and rewind do not work. transcoding is not enabled.
View 7 Replies
View Related
Dec 4, 2010
Every music or video player I use there is the same problem, I can't fast forvard the song. the seeker is grey and I can't move it so I can't move the slider to, for example, to middle of the song.
View 8 Replies
View Related
Jun 1, 2010
I've installed Ubuntu 10.04 and it works like a charm, pretty much all over. However I seem to have problems using my M-Audio Fast Track Pro with all four channels - primarily when using Mixxx. I hate to switch between Win7 and Ubuntu just for the use of my VCI-100. Is there a way to have Fast Track Pro work? I tried almost any of the solutions found around here - but i simply cannot get it to work.
View 4 Replies
View Related
Dec 10, 2010
I've tried the Browser,Unfortunately,both the Firefox and Chrome do not support the function forward and rewind.
View 7 Replies
View Related
Nov 1, 2010
Does anyone have any experience of forwarding audio from Ubuntu to Windows 7 x64 via JACK? I'm struggling to find any useful documentation. I've tried to accomplish the same using a Pulseaudio server, which is better documented but the windows binaries are years old and as far as I can tell can't be made to work without disabling IPv6. Any other ways to forward audio would also be welcome. Bandwidth isn't really an issue as it's VM to VM on the same machine.
View 1 Replies
View Related
Sep 1, 2010
I can play mp3, ..... etc. fine on gnome. However on kde, they always play at 3x or 4x speed. In fact, they just run through, not producing any sound. I can see the video zipping past on ...... Is there a setting for this on kde, that needs to be fixed?
View 2 Replies
View Related
May 10, 2011
I have been using windows operating system for a long time now, but I am not well familiar with linux. Whenever I used to install Windows, I used to install the corresponding audio drivers(in order to listen to the music). The problem I am facing is that I do not know how to install the audio drivers(if they really exist in linux Mint 10 operating system). As a result I am not able to listen to any audio file due to lack of corresponding audio driver programs. make proper configurations settings so that I can listen to audio files in Linux Mint version 10.
View 4 Replies
View Related
Nov 14, 2010
I have Songbird running on another display on the same machine as my Mythtv frontend but while the frontend is running, audio seems to be disabled for it and other applications. I assume that this is because Mythtv suspends Pulse audio.
Is it possible to make this work without enabling pulse audio?
View 2 Replies
View Related
Jan 14, 2011
I am trying to get the 5.1 audio working on the gigabyte g31m-es2l mobo which has ALC883 audio chipset.Its onboard audio.
Its a fresh installation of ubuntu.I have set the sound properties as below.The speaker test only works for the front right and front left speakers.Rest other speakers are muted.
Also tried editing the /etc/pulse/daemon.conf file with uncommenting the audio channels from 2 to 6 and rebooting.Still its not working.
Tried running the following command and again only the front right and left speakers light up.
View 9 Replies
View Related
Mar 21, 2011
I can't find any S/PDIF audio output options in System --> Preferences --> Sound. How do I enable S/PDIF audio output from my onboard audio?
View 4 Replies
View Related
Nov 2, 2010
It appears that a write protected socket was established as a symbolic link between an audio file and the binary of the audio itself.
We are unable to remove the files and the holding folder. Attempted all possible combination of RM that I could think of and then graduated to shred. We are unable to do so code...
View 3 Replies
View Related
Feb 21, 2011
For X-Mas I got myself a nice little nettop running off an ION motherboard. how to enable HDMI audio output, but got it to work. I've realized that when I'm in XBMC (which is admittedly the only place I watch movies) certain sounds like gunshots will be extremely louder than something like dialog. My friend believes that I should mess around with the channels (to fake the center channel from the left and right) I don't want to threaten Linux, how lightweight I can make it which is critical to an HTPC, but considering XBMC just got a Netflix addon
View 1 Replies
View Related
Feb 10, 2010
I recently installed Deluge 1.2.0 from the following PPA:[URL]I using this on two different Linux computers. One is running Linux Mint 8 and the other is running Ubuntu Netbook Remix 9.10. The first time on either computer when I enable WebUI in the Deluge GUI it works fine. However if I ever disable it in plugins section I am subsequently unable to re-enable it (doesn't appear in the side panel again). Rebooting or reinstalling Deluge seems to have no effect.Is this a bug or am I doing something wrong?
View 3 Replies
View Related
Oct 10, 2010
My install of 10.10 went fine with the exception of Audio. If I attempt to use audio with the Rythmbox application or through Adobe Flash (in firefox), it sounds like an old fashioned 33 1/3 rpm phonograph record playing at 45 rpms. This problem has been around for a while and I had hoped that it would be cleaned up by now.
I'm running an AMD 64 processor (in 32 bit mode) and my audio card is a "Sound Blaster Live Value" (EMU10k1X). My on-board sound card is turned off in the bios. It works beautifully under Ubuntu 10.04 and FC13 with Pulse Audio.
Originally I thought that it might be a problem with Rythmbox which is now at v 0.13.1, a later version then I have been using in 10.04. However, with the Rhythmbox application off, I still get the same effect when trying to use audio in firefox. I also noticed that my cpu utilization climbs to about 80% when Rhythmbox is on.
View 9 Replies
View Related
Aug 16, 2010
Kernel 2.6.21.5, GNU (slackware 12.0).
KDE 3.5.7
K3b 1.0.2
I have a FLAC file with 24-bit samples instead of 16 bits. I could use the flac linux command to obtain a WAVE file and then cdrecord to burn the audio CD. Unfortunately, cdrecord requires 16-bit digital audio as input. Is there a program able to author 24-bit audio CDs either from a FLAC file or from a WAVE file?
View 9 Replies
View Related
Sep 26, 2009
my audio and the audio while video is playing way to fast ive searched google for a fix and have tried a few. but to no avail.
View 12 Replies
View Related
Jul 18, 2011
I'm using using ubuntu 11.04, and im using Avidemux (GTK+) whatever date that is, got it a couple days ago from the software center.
I attached some .a/s/s subtitles to the video, and the preview looked great. Encoded the video, and the audio plays like two times faster than the actual video, so by about halfway through the video, the audio is done and im left in silence with the video still going.
I set the video to MPEG-4 AVC, attach .a/s/s subs, leave audio alone, and encode using default option (Single pass-quality quantisizer)
View 1 Replies
View Related
Mar 25, 2010
I have one server with 4 network interfaces:
eth0: 192.168.0.0/24 - local lan A
eth1: 200.1.2.3 - internet link - default route
eth2: 192.168.10.0/24 - local lan B eth3: 192.168.20.0/24 - local lan C
Lan A - Default routing to eth0
Lan B - Default routing to eth2
Lan c - Default routing to another server but the workstations has static routing to this server too.
Everything is working fine on Opensuse 11.1 until I upgrade this sever to Opensuse 11.2 ( Reinstall, not update at all ). After upgrade to 11.2 the routing across local lan interfaces simply not work, if you try to ping lan-to-lan you got the message: Network unreachable, even with the IP Forward enable, but the default route is working fine trough the SNAT.
I've come back to Opensuse 11.1 and everything become normal, does anyone have an problem like this? Maybe a bug? PS: I do not try to disable the AppArmor, next weekend I will try Opensuse 11.2 without the AppArmor and post here anyway.
View 9 Replies
View Related
Jul 27, 2011
Well I have been searching for more than a month now and I think I have read every single post related to this subject and finally decided to make a thread.
Now before I begin I am running Openvpn on my CentOS VPS. I have set static IP's for everyone.
Now what I am looking for is this lets say one of my clients wants port 60005 forwarded through my VPS to the internet what are the correct commands to run.
server-ip:60005 to loacl-ip:60005
Sever IP 24.xx.xx.xx
Client IP 192.168.1.2
View 3 Replies
View Related
Jan 16, 2010
I insert a certain cdrom into my DVD drive, the cd is mounted meaning I do can see the cd rom icon on my desktop. The cd rom icon name is the correct label of the cdrom but when I try to open the cdrom it results to be empty.
Then on the same computer I have installed Virtual Box and the Windows 7 image does read the content of the cdrom.
How can I read the content of the cdrom with ubuntu 9.10?
View 3 Replies
View Related
Jun 26, 2009
I have had F11 installed for over a week. When I play a video or a sound file it plays fast. All the audio is whinny and voices are high like its playing to fast. If i match the time it does play about 6 seconds fast.
View 3 Replies
View Related
Feb 10, 2010
I recently installed Fedora 12 on a new gigabyte mb and for unknown reasons to me videos from ..... and others run very fast (5X) or more, and I'm also unable to get audio to work. All this only happens if I'm using KDE, all work ok in GNOME.
View 13 Replies
View Related
Jul 16, 2010
I would like to convert OGV files to audio format.
View 4 Replies
View Related
