Ubuntu Multimedia :: All Video Playback Looks To Be In Fast Forward?
Mar 4, 2011
After working properly for over a year my videos started playing in fast forward. This can be on the internet (as in wwww.wimp.com) or my video clips located on my hard drive.
Also, on a different note my volume control stopped working. My keyboard has a volume control wheel that I used to use to control the volume of music and videos. First it gave out on my side and continued to work on my wife's side and now it doesn't work on ether. (the volume level bar pops up on the screen but doesn't affect the output) (The volume can still be controlled with the mouse though by clicking on the volume bar on whatever web page I am looking at.)
View 6 Replies
ADVERTISEMENT
May 14, 2010
I have two Ubuntus installed. A 10.04 and a 9.04. In 9.04 if I watch a video in Firefox, it works very smoothly and nicely. Using the "top" command, totem-plugin-vi is using the most cpu time at about 16%, and xorg is using about 5%. But in 10.04, totem is using 72% and xorg is using 26%, and it looks really choppy. I think watching DVDs is the same way. I checked "Hardware Drivers" in the System->Administration menu (in 10.04) and it said "No proprietary drivers are in use on this system." I'm guessing maybe I'm using different video drivers on each system, but I don't even know how to check. and here is an excerpt from lspci:
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
View 3 Replies
View Related
Aug 28, 2010
I've been hunting around for some screen capture software in Ubuntu, for future screencasts and out of the handful I've tried I've gone with gtk-recordmydesktop. After initial problems with recording quality, I have managed to get everything working but have noticed that on playback of any captured video, is played back at a crazy speed, the frame rate is not the issue as it is on the default 15 FPS setting but still the play back is very fast.
I noticed before my tweaking that playback was normal speed, but the quality was garbage, and I found that this was because of Compiz being enabled, and I have to run gtk-recordmydesktop with "Encode on the fly" and "Full shots at every frame" enabled in order for the video playback to not be all cut up, however ever since encoding on the fly has been enabled, this has caused playback to be hilariously fast.
I'm running Ubuntu 10.04 with Compiz enabled. With an nVidia GPU (8200 M)
View 1 Replies
View Related
Sep 1, 2010
I can play mp3, ..... etc. fine on gnome. However on kde, they always play at 3x or 4x speed. In fact, they just run through, not producing any sound. I can see the video zipping past on ...... Is there a setting for this on kde, that needs to be fixed?
View 2 Replies
View Related
Oct 23, 2010
I'm in trouble with playbacks (video and audio, desktop apps and live streams on Firefox). They are all running at least at double speed.
[URL]
Running Fedora 13 - 64 bits - cpu AMD Phenom II X2 955 (dual core) flat, no overclocking, no hacking of any kind. I've tried a re-install of all media codecs and plugins. The problem persists since fresh install of Fedora.
View 3 Replies
View Related
May 23, 2010
I just(4 hours ago at this writing) installed 10.04 LTS LL on my Toshiba Satellite. I transfered a few albums from my external HDD, to my laptop, and opened Rhythmbox. First, as usual with a new install, I had to dl Gstreamer, and some other plugins, to allow the program to properly play mp3's. This was done with no problems, of any kind, but I then found that, once a song began to play, I was unable to skip ahead in the track.
View 2 Replies
View Related
Aug 23, 2010
videos/hulu/etc. are suddenly screwed up. i get no sound and the videos all play in fast forward. i'm assuming i missed the solution to this in one of the many ginormous threads on here...can anyone point me in the right direction?
View 1 Replies
View Related
Oct 27, 2010
I am having music playback issues in lucid right now. When I try to play music through any player, the music plays at a slightly higher speed - roughly 10% faster (a 3:17 song finishes in 2:5. I tried installing 10.10 and had the same problem, and I just went back to 10.04 with a fresh install and still seeing the issue. Is this a common problem for people? My sound hardware is the following as reported by lspci
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
For reference, I also have 2 other boxes in the house running 10.04 with different sound hardware with no issues. Their hardware are:
00:06.1 Audio device: nVidia Corporation MCP55 High Definition Audio (rev a2)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
View 4 Replies
View Related
Nov 17, 2010
I'm having an issue with playback in Amarok 2.3 on openSUSE 11.3. When using xine, Amarok will playback songs very quickly, probably something like 3X-4X faster than it should be. There is also no audio output when it does this. Using gstreamer it plays back at normal speed, but also without audio output. I've done some searching for this problem, but haven't found anything helpful. Any ideas are greatly appreciated. Below I'm listing all the multimedia/codec packages that I have installed.
gst-fluendo-mp3-2-37.6.i586
gstreamer-0_10-0.10.29-1.7.i586
gstreamer-0_10-ffmpeg-0.10.6-42.pm.1.i586
[code]....
View 8 Replies
View Related
Jan 4, 2010
Just did a fresh install of Karmic, got all necessary decoders installed for video and audio playback...I think.
Problem is I can't forward/search in audio files I am playing. I mean I can only Play, Pause, Stop or "Next-track" a music file. Video files are fine.
I've tried Exaile, Rythmbox and even Totem. It is like the audio files are "half read-only".
If I drag a horizontal scroller in the music player and let it go, it will only jump back to the position where it is actually playing.
Has anyone experienced, this? I am a missing something in gstreamer or something like it?
View 4 Replies
View Related
Jan 5, 2010
I am "fleshing out" my USB flash drive Netbook Remix of Ubuntu and have run into a snag on getting Mplayer Movie Encoder to work. Synaptics eventually showed 28 new packages will be installed which was done. But, the skin showing the "controls" (fast forward, pause etc) is dead. I am using the USB flash on a HP desktop and all other Remix features work well. Plus the Nvidea gui card fills my 19" flat screen exquisitely well. And, the stick works very nicely on my Acer Netbook (aspire one 250) too.
View 2 Replies
View Related
Sep 3, 2010
i followed this thread and got mediatomb on my ubuntu 10.04 lucid running. i have a samsung UE-32B7020 tv.
the only problem is that for .avi and .mp4 movies (these are the ones i tried), fast forward and rewind do not work. transcoding is not enabled.
View 7 Replies
View Related
Dec 4, 2010
Every music or video player I use there is the same problem, I can't fast forvard the song. the seeker is grey and I can't move it so I can't move the slider to, for example, to middle of the song.
View 8 Replies
View Related
Nov 17, 2010
I am new to this forum and have recently switched to Ubuntu. The OS installed without a hitch and was able to get video card, wireless internet installed with relative ease. However, I have encountered a problem installing my E-mu 0404 PCI sound card via the ALSA packages in Synaptic.
Code: 04:03.0 Multimedia audio controller [0401]: Creative Labs SB0400 Audigy2 Value [1102:0008] As you can see once the packages were installed the OS could see the hardware ok, but when I tried playing a standard MP3 file (16 bit, 44.1khz, 192kbps) in Totem it started playing the file back around 15-20% faster than normal? To me it sounds as if the software is playing the audio back at higher sample rate than 44.1khz hence the faster speed, though I'm not 100% on that.
The next thing I tried was playing the same file back in VLC and it was exactly the same (15-20% too fast), but this time it was horrible and glitchy as well, almost as if the audio buffer size was set to small. The same thing happened when I tried playing back some flac and wav files (all 16 bit, 44.1khz) also. I have searched google (and read the comprehensive sound card guide on this forum) and read several forums, guides, etc. for anybody posting the same issue with this particular card but could find nothing. From all reports I've read this card should work fine under ALSA. For the record I'm using Ubuntu 10.10 64bit kernel running on a Dell Dimension 9200 (Intel Core2Duo E6400 2.13ghz) with 2GB RAM.
View 9 Replies
View Related
Oct 17, 2010
When I play large HD videos in mplayer, the video and sound frequently get out of sync, and the video plays a little strangely (occasionally speeding up and occasionally slowing down).
I think it's because mplayer is only running on a single core. As I've got a quad-core processor, it seems inefficient. I've seen that there is theoretically a way to get mplayer to work with multicore setups, but it requires compiling with different options. That'd take me a little while to work through.
Ideally there would be a pre-compiled version in the software centre, or a player which has support built in (again, ideally in the software centre). Is there such a thing available?
View 1 Replies
View Related
Feb 26, 2010
video playback is like I have applied a blueish sepia filter over it. And this is just the playback from totem player or mplayer, and not the playback from ..... (and generally online streaming) - this works just fine. this messy video playback also appears when I use cheese to capture video with my webcam. Note that the preview picture of the video file on nautilus has the natural colours it should have.
at first when I installed the os this particular problem didn't exist, but it came up the time I decided to follow the "comprehensive multimedia guide". So now I have all the pros of following the guide, but this is a major con...
View 3 Replies
View Related
Apr 11, 2011
I am setting up a MythTV environment to switch from Windows based MediaPortal (with a high number of disturbing bugs). Yet, I have three difficulties, which I want to discuss with you. They are:
- No audio via HDMI see [URL]
- Video resolution seems to change during video playback
- Channels cannot be found via DVB-S [URL]
As you can see, I have created three posts to keep discussions focused.
Alltogether I have the following setup:
- AMD 5050e CPU
- 8 GByte RAM
- Biostar TA890GXE
- Samsung LE40M86BD, connected via HDMI (and only HDMI)
- Mythbuntu 10.10 with proprietary drivers installed
- Technisat Skystar HD2 DVB-S card (two times)
Now, here is the problem:
Whenever I playback any video material using e.g. VLC, the screen resolution changes. This also applies when playback the video in a window and not fullscreen. The problem is that whenever the screen resolution changes, short time later the TV set blanks screen and show the TV set specific information "unsupported video mode".
How can I enforce to stay in the configured video mode?
View 2 Replies
View Related
Feb 8, 2010
I have loaded 9.10 ( 64 bit ) under VMWare Workstation 6.5 and each new install results in fast audio ( mp3 ) and video ( avi, mpg, etc ) playback. I am trying to keep the installs as vanilla as possible. My other VM distros are fine.
I am creating the VMs under vista x64, SP1 ( now updated to SP2 ), using workstation 6.5 ( will upgrade to 7 later on ).
View 3 Replies
View Related
Oct 23, 2010
I'm sorry if this was asked before (i know it was but never worked for me) 2 days ago I installed ubuntu 10.10, my very first linux OS and I immediately fell in love with it.The only problem now, is tearing during video playback (I'm a perfectionist with a thing for fine details, so this is literally killing me)
I have nVidia 9200M GS (HP laptop)
I've set nVidia setting to sync vblank and disabled it in compiz
I've also disabled PowerMizer..
I love the system to give up some vsync issues in moving windows, but i just can't get over video tearing. I'm ready to install anything, change anything, even do a new clean install to get it working. UPDATE: Installed SMPlayer, works fine but drops couple of frames every 5 secs or so (more annoying than tearing lol) is there any specific settings that can fix that?
View 2 Replies
View Related
Apr 8, 2011
Both MP4 and OGV playback completely weird on my Ubuntu 10.04.2 laptop:
The resolution/length/etc is correct, but the picture is all weird. Webm doesn't work at all.
I tried mplayer, kmplayer, smplayer, gxine, totem and kplayer. All the same.
However, the exact same video's play back normally in HTML5 pages with a bunch of browsers on the same machine. They also play back normally on a Windows machine. There is no DRM involved.
Aren't these gstreamer en mplayer based players supposed to handle this correctly?
This is an Intel Core i3 machine with Intel HD graphics.
View 9 Replies
View Related
May 18, 2011
i am loving the ubuntu 10.10 interface.my laptop is a toshiba satellite l450 (3gb ram + 2.10ghz amd proc essor. i use a ati radeon hd 3200 graphics card.i have to manually adjust the sound settings if i plug in a headphone or a hdmi cable to suit the necessary output. windows did this automatically.my video quality is very very poor. if i run videos on any browser or watch a movie (avi file) on totem or vlc it is very jumpy and the sound is often out of sync.
View 1 Replies
View Related
Jan 15, 2010
I have a Dell Latitude CPi that has 400MHz Intel Processor and 256 MB of ram. It has a Neomagic Corporation NM2360 [MagicMedia 256ZX]. I have it set to 16 bit color depth and it is using the neomagic driver. My problem is that it cannot play any video of any size flash, or saved to hard drive. It has a fps so low that I can see it rendering each frame going across the screen. It doesn't seem to have a problem with animated pictures, just actual video files. I don't know whether or not this matters but the card set is known to not support 3d acceleration. I can run any commands in terminal and have a good understanding of the linux environment. This problem has occurred under Ubuntu and Xubuntu and still happens if I use a light weight WM like fluxbox.
View 2 Replies
View Related
Feb 21, 2010
When trying to playback DVDs in VLC media player, I have to switch the video output driver to get any playback.If I leave it on "Default" (which I think is defaulting to "XVideo Extension Video Output"), I get a solid green or blue screen (which I also get with "Xvideo Extension Video Output")If I switch it to "OpenGL Video Output", I get proper DVD playback but it is kind of pixelated and ugly.If I switch it to "X11 Video Output", I get DVD playback that is very crisp and sharp, the image quality is great.unfortunately, the colors are completely messed up and the blue is completely saturated.I've played with the color settings (especially the Hue setting), but I can't get the colors to look right.
I'd really like to use the x11 video output since the quality is the best, but I can't get the colors right.the first one (Screenshot.png) is OpenGL output, and the second (Screenshot-1.png) is X11 output.It's also worth noting that I am on an IBM ThinkPad R32 with an ATI Mobility Radeon 7000 (or M6, or M6 LE, whatever you wanna call it).I'm running a fully updated 9.04 Jaunty installation.
View 7 Replies
View Related
Apr 3, 2010
I've installed Ubuntu 9.10 and the prime reason for giving it a go is due to the media center capability with apps such as Moovida and LinuxMce.
Unfortunately during video playback [either divx or flash] there appears to be a random line or lines which flickers on the screen when the video is in fullscreen mode.
I'm using an ATI x1900 video card and have tried using both Tote and VLC, and I have also tried installing the fglrx.
But, both with and without flgrx installed, under the section 'Device' in xorg.conf it says that the driver is 'vesa'.
I don't know how to disable the default ATI driver to enable fglrx, or whether I am going off on completely the wrong tanget and should be looking at something else.
Or is there better support for my type of card in Ubuntu 10 as I don't want to go back to Ubuntu 8 which is the last supported version of the os that ATI developed a driver for my card.
View 1 Replies
View Related
Apr 26, 2010
I have a 30" LCD with 2560x1600 pixel resolution. I would like to make and play videos at this resolution, but software decode is too slow, and the GPU accelerated decode (VDPAU) maxes out at 2048 pixels. It might be possible to decode 2Kx2K and cut-and-paste and reorganize the rectangles to fill 2560x1600. But someday I plan on getting a 4K screen (4096x2160 pixels) and I would like to support that too. For that it seems two video streams decoded by two GPUs and exactly synchronized would work.
View 1 Replies
View Related
May 26, 2010
Im running Xubuntu 9.10 on my compaq v2000 laptop. My problem is that the video stream playback is very choppy. I have tried the method found here [url] but when i get to the part where I have to type "echo base....." when i hit enter my terminal replies with "bash: echo: write error: Invalid argument"...How to fix this choppy video streaming playback...
View 1 Replies
View Related
Sep 30, 2010
I have an Nvidia 8600 GTS 256 MB installed--
Is there a problem with my video driver? Codecs?
View 1 Replies
View Related
Jan 2, 2011
after a recent foray into Ubuntu. Every day is a school day at the moment, so please be gentle! I recently obtained an old IBM Thinkpad T41 which I've made dual boot Windows XP and Ubuntu (windows was my backup option - it's installed but with none of the drivers; thankfully I've not yet hit a problem Ubuntu can't handle!) and which is connected up to the TV in our lounge. I have installed XBMC on it, and we're currently enjoying having access to all sorts of multi-media and iPlayer in the lounge. The thinkpad connects to our home network wirelessly, using the Thinkpad's built in wireless hardware - providing a whopping 11Mbps connection. Our media is all stored on NAS on the network, and I thought that even full 54Mbps wireless would not be fast enough to stream videos smoothly onto another machine.
However we have two windows laptops (one windows 7, one windows xp) which have 54Mbps connections and they can stream the videos smoothly from the NAS, so clearly I was wrong (wer'e not talking High def or blue ray rips here or anything). So my first question. Does anyone have an recommendations of a 54Mbps wireless card (PCMCIA preferably) that is compatible with both Ubuntu and the Thinkpad so that I can improve it's connection speed to the network? I have a "Max Value" branded card in the windows xp laptop (bought cheaply from Amazon) that I tried to but failed miserably to get working in the Thinkpad with Ubuntu last night. All hints and tips welcome....
Second question: Improving video playback on the thinkpad. Some of the videos were a bit choppy, which I thought was just to do with video quality. However having been playing them on the windows xp laptop - Sony Vaio PCG-FR215S, so similar in age and processor speed to the thinkpad - they play absolutely perfectly. So what are my options for improving the video playback on the Thinkpad running Ubuntu? - Upgrade memory to 1GB from 512MB? Will this make much difference? The sony has been upgraded to 1GB, which is why I ask the question. Do I have any options on the dedicated graphics processing hardware front? I'm guessing they are severely restricted as it's a laptop, but thought I'd ask as obviously I'd only be interested in something that is supported by Ubuntu.
Nvidia acceleration is enabled in Ubuntu, and in XBMC. The playback quality in XBMC is comparable with using VLC so I don't think there is anything XBMC specific to be concerned with at the moment.
View 7 Replies
View Related
Feb 10, 2011
I just upgraded to Ubuntu Maverick v 10.10 and loving it. However, I have encountered a problem with playing any type of video whether it be Xvid, AVI, h264, MKV or AAC. I have tried many players from smplayer, mplayer, kmplayer, vlc, etc. but I am still having the problems. I have read some posts on here and I've disabled compiz, tried the X11 tweak and updated my Nvidia drivers. I don't know if I am missing some type of codec or restricted plugin because I have ample space and resources are readily available while playing the video.
View 2 Replies
View Related
Apr 29, 2011
i just updated to 11.04 and now my system logs out every time i play a video file.
View 9 Replies
View Related
