Ubuntu Multimedia :: Mplayer Not Working - Fast Forward / Pause Dead

Jan 5, 2010

I am "fleshing out" my USB flash drive Netbook Remix of Ubuntu and have run into a snag on getting Mplayer Movie Encoder to work. Synaptics eventually showed 28 new packages will be installed which was done. But, the skin showing the "controls" (fast forward, pause etc) is dead. I am using the USB flash on a HP desktop and all other Remix features work well. Plus the Nvidea gui card fills my 19" flat screen exquisitely well. And, the stick works very nicely on my Acer Netbook (aspire one 250) too.

View 2 Replies


ADVERTISEMENT

Ubuntu Multimedia :: Mediatomb On 10.04 Lucid - Fast Forward Not Working (Samsung UE-32B7020)

Sep 3, 2010

i followed this thread and got mediatomb on my ubuntu 10.04 lucid running. i have a samsung UE-32B7020 tv.

the only problem is that for .avi and .mp4 movies (these are the ones i tried), fast forward and rewind do not work. transcoding is not enabled.

View 7 Replies View Related

Ubuntu Multimedia :: Rhythmbox Refuses To Fast-forward?

May 23, 2010

I just(4 hours ago at this writing) installed 10.04 LTS LL on my Toshiba Satellite. I transfered a few albums from my external HDD, to my laptop, and opened Rhythmbox. First, as usual with a new install, I had to dl Gstreamer, and some other plugins, to allow the program to properly play mp3's. This was done with no problems, of any kind, but I then found that, once a song began to play, I was unable to skip ahead in the track.

View 2 Replies View Related

Ubuntu Multimedia :: Flash Vids In Fast Forward?

Aug 23, 2010

videos/hulu/etc. are suddenly screwed up. i get no sound and the videos all play in fast forward. i'm assuming i missed the solution to this in one of the many ginormous threads on here...can anyone point me in the right direction?

View 1 Replies View Related

Ubuntu Multimedia :: All Video Playback Looks To Be In Fast Forward?

Mar 4, 2011

After working properly for over a year my videos started playing in fast forward. This can be on the internet (as in wwww.wimp.com) or my video clips located on my hard drive.

Also, on a different note my volume control stopped working. My keyboard has a volume control wheel that I used to use to control the volume of music and videos. First it gave out on my side and continued to work on my wife's side and now it doesn't work on ether. (the volume level bar pops up on the screen but doesn't affect the output) (The volume can still be controlled with the mouse though by clicking on the volume bar on whatever web page I am looking at.)

View 6 Replies View Related

Ubuntu Multimedia :: Unable To Fast Forward Audio File / Enable This?

Jan 4, 2010

Just did a fresh install of Karmic, got all necessary decoders installed for video and audio playback...I think.

Problem is I can't forward/search in audio files I am playing. I mean I can only Play, Pause, Stop or "Next-track" a music file. Video files are fine.

I've tried Exaile, Rythmbox and even Totem. It is like the audio files are "half read-only".

If I drag a horizontal scroller in the music player and let it go, it will only jump back to the position where it is actually playing.

Has anyone experienced, this? I am a missing something in gstreamer or something like it?

View 4 Replies View Related

Ubuntu Multimedia :: Music Player - Can't Fast Forward The Song - Seeker Is Gray

Dec 4, 2010

Every music or video player I use there is the same problem, I can't fast forvard the song. the seeker is grey and I can't move it so I can't move the slider to, for example, to middle of the song.

View 8 Replies View Related

Ubuntu Multimedia :: How To Skip Forward/backwards With Mplayer

Apr 9, 2010

when watching a movie in browser (ff/chrome) or using mplayer to replace flash on ..... for instance, i cannot skip around the video i'm watching...

- is there a way to be able to skip forward/backwards with mplayer?

- is there a way to replace mplayer with another program that will allow me to skip?

View 4 Replies View Related

Fedora :: Music /Video Always In Fast Forward Mode On Kde?

Sep 1, 2010

I can play mp3, ..... etc. fine on gnome. However on kde, they always play at 3x or 4x speed. In fact, they just run through, not producing any sound. I can see the video zipping past on ...... Is there a setting for this on kde, that needs to be fixed?

View 2 Replies View Related

Ubuntu Multimedia :: Green Audio Jack Dead Blue And Pink Not Working As Output?

Apr 10, 2010

The Green jack for audio of the sound card is dead. The other jacks [Blue and Pink] are not working for audio. I have them working as audio outputs in windows xp-using the Realtek interface.How can I do the same in Ubuntu?

View 9 Replies View Related

Ubuntu Multimedia :: Get Mplayer-vaapi Working On System?

Jun 30, 2010

I am trying to get mplayer-vaapi working on my system, so I can watch 1080p videos with hardware acceleration (and to remove the tear effect).

Anyway I am having trouble getting VA Api to work correctly. I have extensively google-ed around, and I cannot find a way to fix this problem.

Here is the output for vainfo (the error from vainfo is the same as mplayer-vaapi):

Code:
libva: libva version 0.31.1-sds1
Xlib: extension "XFree86-DRI" missing on display ":0.0".
libva: va_getDriverName() returns 0

[Code].....

but I have found that:

1. The Xlib error shouldn't matter
2. I do have an fglrx_drv_video.so file in /usr/lib/va/drivers
3. I have installed the latest libva amd64 deb package
4. I have installed the latest xvba amd64 deb package

I am running Lucid on 2.6.34-020634-generic kernel (with a patched fglrx module). I have an ATI Mobility Radeon HD 5800 Series card.

Also before I found the deb package for libva I followed this tutorial to compile it (some things had to be tweaked for it to compile successfully) [URL]. But I did reinstall libva when I found the .deb package.

View 3 Replies View Related

Ubuntu Multimedia :: Gnome-mplayer Stops Working?

Apr 27, 2011

I am using Ubuntu 10.10. At some point gnome-mplayer (and gecko-player) have stopped working. Try open any audio or video file there is nothing (the progress bar just shows "stopped"). However, Smplayer is working flawlessly for both video and audio files so I am sure it is not a mplayer problem

I have delete the folder .conf/gnome-mplayer but nothing changes.

gnome-mplayer version 0.9.9.2
mplayer version 2.0

View 7 Replies View Related

OpenSUSE Multimedia :: Mplayer Codecs Not Working With Other Players?

Nov 5, 2010

I downloaded the mplayer essential codecs pack and extracted in directories mentioned.I even compiled mplayer and it can play now almost all the files. But I am having a problem.The problem is that other multimedia players dont play even a single file.I tried with xine,totem,kaffiene and every bundled player.

View 6 Replies View Related

Ubuntu Multimedia :: Online Video Players - Pause - Play - Buttons Dont Work Unless Click On Multiple Times

Apr 28, 2010

When i got to a site such as You Tube of South Park Studios the vidio playes fine but the pause, play , fullscreen ect... Buttons dont work unless it click on them multiple times!

View 3 Replies View Related

Ubuntu Installation :: Dead Keys Not Working In Emacs [Lucid]

May 4, 2010

I'm having trouble with dead keys in Emacs on Ubuntu Lucid and I'm at my wits' end. Using a standard Norwegian keyboard layout, and dead keys work fine in all Gnome applications. But Emacs just spits out messages about undefined keybindings when I use dead key combinations, for instance for tilde (~): "<dead_tilde> is undefined". This is super-annoying, since I use Emacs a lot, and I need some way to fix this.

What I've tried so far: Loading the 'iso-transl' library in Emacs seemingly makes the dead keys work, but it's not consistent across modes (works for plain text, though), and I didn't need to do this before. Also, loading this breaks Emacs' latin-1-prefix input method, for some reason. Fiddling with keyboard-preferences, iBus, im-switch xim/none/ibus, etc. Removing ~/.xinput.d directory. Fiddling with various environment variables: GTK_IM_METHOD, GTK_IM_MODULES, XMODIFIERS

Of course, I'm testing this in Emacs started with '-Q' to elminiate problems that might be caused by my own rather extensive set of initialization files. Using dead keys in Emacs has never been a problem until I upgraded to Ubuntu Lucid.

View 6 Replies View Related

Ubuntu :: Back - Up - Forward Navigation Not Working Properly

Aug 17, 2010

I installed Ubuntu 10.04 on my systems. In the file browser or any internet browser, if I click on back, forward or up, nothing happens. I stays on the current page/location. Even if goes back, sometimes, it again comes back automatically to current page/location. I can navigate using keyboard but not with mouse.

System Configuration:
Processor: Core 2 Quad 2.5 GHz
RAM: 2 GB
Motherboard: Intel Desktop Board DG41RQ.

View 2 Replies View Related

Software :: Exim4 Forward Emails Not Working?

May 4, 2011

Running exim4 on debian and trying to forward all emails destined for root@mydomain.com to me@mydomain.com, I did setup the entry in the /etc/alias file in the following way:

root: me@mydomain.com

run newaliases restart exim "although not needed if I am not mistaken"

then on command line mail root@mydomain.com and the email still goes out for root@Mydomain.com and not me@mydomain.com I am using a smarthost, and that smarthost refuses to serve emails going for root@. I am OK with that as I should be able to easily rewrite those message to go to me@mydomain.com

But it is simply not working, anything I might have missed here ?

View 3 Replies View Related

General :: Monitor Not Working As Expected With LiveDistros - Screen Is Totally Dead ?

Feb 27, 2010

I have an Acer Aspire 6930g with an nVidia GeForce 9300m GS which has a broken screen. I have been using an external monitor for some time using Linux Mint, without issue.

I initially set this up with great difficulty using the small parts of the screen that would still display an image at the time. Now, however the screen is totally dead, I have since disconnected the laptop monitor in order to not cause issues.

The issue I am currently having is trying to use live distros.

I'll give you example: I boot ubuntu 9.10 32bit and it gets to the initial boot menu. I choose "Try Ubuntu..." It shows the loading screen. Screen goes blank when going to desktop

I tried Ctrl+Alt+F1 to get to a terminal, but the screen stays blank. The same thing happens with both Knoppix and Backtrack 4 as well. The display goes blank upon switching to the desktop.

View 2 Replies View Related

Ubuntu Installation :: Can't Get Past Install Screen (Forward Button Not Working)

Oct 11, 2010

I'm installing Ubuntu 10.10 on my desktop and it seems I can't get past the "Who are you?" screen as I can't click the forward button

I've tried a number of times; installing from within live usb, without an Internet connection (Just to see if it helps) but all failed

EDIT: It was because my username had a capital letter in it.

View 9 Replies View Related

Ubuntu Multimedia :: Music Playback Too Fast In 10.04?

Oct 27, 2010

I am having music playback issues in lucid right now. When I try to play music through any player, the music plays at a slightly higher speed - roughly 10% faster (a 3:17 song finishes in 2:5. I tried installing 10.10 and had the same problem, and I just went back to 10.04 with a fresh install and still seeing the issue. Is this a common problem for people? My sound hardware is the following as reported by lspci

00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)

For reference, I also have 2 other boxes in the house running 10.04 with different sound hardware with no issues. Their hardware are:

00:06.1 Audio device: nVidia Corporation MCP55 High Definition Audio (rev a2)

00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)

View 4 Replies View Related

Ubuntu Multimedia :: MEncoder Settings For DVD Fast Rip

Nov 26, 2010

I'm doing a little python app for encoding .avi from dvds. I know there are a few really good applications out there that do the same thing but I wanted something simple with less faff. The application has 3 settings: Fast, Medium, and Slow. These are for the varying quality rips. For file format I was thinking either lavc or Xvid.

So my first question is, which is better? I really don't know anything about it and I haven't found a decent site that compares them. And secondly what are the best settings for a DVD rip for a Fast Rip, a 'Best of Both' Rip, and a Best Quality Rip? If I've missed any factors in this, please let me know, I'm new to the DVD ripping game. I have no intentions of distributing the movies, they are for my own uses.

View 2 Replies View Related

Ubuntu Multimedia :: PulseAudio / DBus And KDE Broken - Dead

May 31, 2010

Recently I had installed a kubuntu (i'm new to linux), recently being 3 days, 1 day of actual use. When I tried to watch dvd's I installed vlc and it didn't work at all. I made this post: [URL]. Then I made a post at vlc forums and asked what can be wrong with vlc as it is closing after anything. They asked for some debug log, I provided it

Code:
istrebitel@dom-tux:~$ gdb --args vlc -vv
GNU gdb (GDB) 7.1-ubuntu
Copyright (C) 2010 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or late [URL]
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "i486-linux-gnu".....

Your system is so broken that it's not funny. PulseAudio is dead, DBus is dead, KDE is dead. Sorry. Please refer to Ubuntu support. [URL] What exactly should i fix in my system? And what do they mean by it being broken and dead? I can pretty well listen to audio and watch video and kde is working fine with all that nice eyecandy...

View 4 Replies View Related

General :: Escape Forward Slash But Not Working Statement Garbled?

May 2, 2011

I am trying to use sed command to repalce one string with other but somehow replacement string contains forwards slash hence getting the error statement garbled!

[Code]...

View 4 Replies View Related

Ubuntu Multimedia :: Video Playback Slow In 10.04 But Fast In 9.04?

May 14, 2010

I have two Ubuntus installed. A 10.04 and a 9.04. In 9.04 if I watch a video in Firefox, it works very smoothly and nicely. Using the "top" command, totem-plugin-vi is using the most cpu time at about 16%, and xorg is using about 5%. But in 10.04, totem is using 72% and xorg is using 26%, and it looks really choppy. I think watching DVDs is the same way. I checked "Hardware Drivers" in the System->Administration menu (in 10.04) and it said "No proprietary drivers are in use on this system." I'm guessing maybe I'm using different video drivers on each system, but I don't even know how to check. and here is an excerpt from lspci:

01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]

View 3 Replies View Related

Ubuntu Multimedia :: Using M-Audio Fast Track Pro With Mixxx

Jun 1, 2010

I've installed Ubuntu 10.04 and it works like a charm, pretty much all over. However I seem to have problems using my M-Audio Fast Track Pro with all four channels - primarily when using Mixxx. I hate to switch between Win7 and Ubuntu just for the use of my VCI-100. Is there a way to have Fast Track Pro work? I tried almost any of the solutions found around here - but i simply cannot get it to work.

View 4 Replies View Related

Ubuntu Multimedia :: Recorded Sound Plays Back Too Fast / Fix It?

Oct 14, 2010

I am having some problems with recording with my laptop. When I try to record something through the laptops mic, usb webcam mic or with desktop recorders audio record feature all playback is too fast (sounds a bit like alvin and the chipmunks :L ) Is anybody else having this problem, or even better know how to fix it ?

Sorry if this has been asked before, I'm running 10.10 and had never tried recording before I upgraded to 10.04. I had the same problem in 10.04 though.

View 1 Replies View Related

OpenSUSE Multimedia :: Amarok Playback Too Fast?

Nov 17, 2010

I'm having an issue with playback in Amarok 2.3 on openSUSE 11.3. When using xine, Amarok will playback songs very quickly, probably something like 3X-4X faster than it should be. There is also no audio output when it does this. Using gstreamer it plays back at normal speed, but also without audio output. I've done some searching for this problem, but haven't found anything helpful. Any ideas are greatly appreciated. Below I'm listing all the multimedia/codec packages that I have installed.

gst-fluendo-mp3-2-37.6.i586
gstreamer-0_10-0.10.29-1.7.i586
gstreamer-0_10-ffmpeg-0.10.6-42.pm.1.i586

[code]....

View 8 Replies View Related

Ubuntu Networking :: Wifi Is Fast Then Slow Then Fast Then Slow Connect Disconnect ?

May 7, 2010

My wireless seems to be fast for a good 30secs then bang takes good while to load the next page almost as if it's disconnecting and then reconnecting/scanning reconnecting. Why cant it stay connected. I have WAP PSK security here is my network setting please let me know if I should change any of them:(side not is there a way to fix this problem occuring so frequently it says on the wiki that it should only occur once in a whilce https:[url].....

View 2 Replies View Related

Software :: Mplayer Frames Per Second Not Working?

Jun 19, 2010

Since I installed Ubuntu 9.10 recently and downloaded a new copy of MPlayer, a Shell execution of Mplayer of a video with the -fps switch, sees the -fps being ignored. The video in question plays the video too fast and goes out of synch with the audio. This has never been a problem as I play the video using the shell and include the -fps option to slow the video down. For instance, the command below would play the video at 30 fps:

mplayer -x 640 -y 480 -fps 30 "/media/USB2/williams.flv"

It has always worked before. What's changed in the latest mplayer, or is there something else I need to install in order to get -fps functionality? I can paste the (rather long) output mplayer gives upon execution of the above command.

View 2 Replies View Related

Debian Multimedia :: No Sound From ALSA - Softmodem Dead Too

Dec 17, 2010

In the process of trying to get the softmodem working, I finally attached speakers to this laptop and tried to play some sounds. Nothing but silence. Both the KDE system sounds and a stand-alone player (noatun) produce nothing. No error messages that I can find, either. (That might explain why the softmodem is dead, too...) I've run alsaconf several times, and even uninstalled and reinstalled ALSA. It thinks it is working, but is not. What sorts of things do I need to check to find where it isn't working?

Info: The motherboard is a FIC 3500W with the VIA P4M800 integrated chipset. This includes the VIA 8237 sound system, which is what ALSA detects and tries to use. The machine also has a Realtek ALC655 but I don't see any drivers for that in the lsmod output, so this is a possible source of the trouble.

View 11 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved