Ubuntu Multimedia :: Forward Audio To Windows Using JACK
Nov 1, 2010
Does anyone have any experience of forwarding audio from Ubuntu to Windows 7 x64 via JACK? I'm struggling to find any useful documentation. I've tried to accomplish the same using a Pulseaudio server, which is better documented but the windows binaries are years old and as far as I can tell can't be made to work without disabling IPv6. Any other ways to forward audio would also be welcome. Bandwidth isn't really an issue as it's VM to VM on the same machine.
View 1 Replies
ADVERTISEMENT
Jun 27, 2011
I've got an Acer Aspire 5101 with Natty on it and everything works so far, but I can't start Muse. It says: "Muse failed to find a jack audio server". At the bottom it also says: "...if Jack was started check if it was started as the same user as Muse". This might be the issue. But how can I check this? BTW: Jackd has been installed and I am a Member of the Audio Group.
I am new to Ubuntu and don't know how to fix this. I got this Notebook for free, because my Brother wanted to dispose it as it didn't worked properly after he reinstalled xp. Only the dvd-drive is broken, the rest is in really good condition for such an old thing. After a lot of trial and error I could finally install Natty from USB.
View 1 Replies
View Related
Jun 9, 2010
Here's the problem: My notebook's right speaker makes an awful sound when playing music. I want to configure the sound so as to get MONO and balanced to the left when I use the built-in speakers, and STEREO w/o balance when and plug a jack, ie: earplugs.
View 1 Replies
View Related
Nov 21, 2010
I try it for the first time. Befor I changed to linux I used MS Windows 7. There I worked much with SonyVegas for video and Adobe Auditon for music. Yesterday I searched for alternatives under Linux for Audition. And I found much. The screen shots says, that they look similar to Auditon. I downloaded them and installed them. But they doesn't work. One of them say they can't connect to Jack. Some of them say nothing, and so they don't record my line in/microphone input. After a few seconds I of search, I knew that all of these programs uses jack for Audio. I installed it, but the situation wasn't better. Then I found a wiki, and try that: first start jack, than start the program. So I do. But there i get a few error messages: At first I should copy to lines to the file lines.conf. I do it. Then I should be member of the audio group. I do that.
[Code]...
View 1 Replies
View Related
Mar 9, 2011
I have had no problems whatsoever with audio in ubuntu 10.10. Both input and output have worked great, but alas now there's a problem.
I recently installed ardour2 with jack (using apt-get) but for some reason, anytime I start ardour2 (which starts jack implicitly) all audio stops on the whole computer. That is my computer goes silent. As soon as I exit ardour2 audio resumes.
Also, although this will probably resolve itself when I resolve the other problem, when exporting a project to audio file from ardour2 it exports silence for the entire duration, even when ardour2 is exited and audio has resumed.
I'm no linux novice, so I'm not afraid of command line solutions (I prefer them actually) however I know nothing about jack or audio editing in linux whatsoever, so if you could be very specific about jack terminology that would be great.
View 1 Replies
View Related
Apr 18, 2011
I'm looking for configuring a Ubuntu box, we need to capture alsa output into ffmpeg with jack or OSS but not pulseaudio, as that tends to glitch badly. We have things working, but we are sort of hacking around in the dark, we play music, but as we aren't linux audio experts ourselves.
View 1 Replies
View Related
Jun 4, 2011
I have had success with operating JACK, but I am still learning... I can get audio through my microphone into ubuntu and can record into audacity without a problem, however, I do not know how to get JACK to recognize the audio from the microphone (through the normal mic jack)... any ideas how I may accomplish this so I don't need to do all kinds of file conversions and imports to set down a vocal track with the tracks I record (via USB) through JACK?
View 3 Replies
View Related
Jan 3, 2010
I upgraded to Ubuntu 9.10 recently to find that my computer will not play mp3 files in Rythmbox, Amarok, or Kaffeine media players. All of the FLAC files I have ripped from CDs work, but no mp3 files work. I have downloaded and installed the ubuntu restricted codecs from Synaptic as well as the codecs prompted by Rythmbox rebooted, and still no result.Like I said, the .FLACs play fine.On another note, no sound is being transmitted to my earbuds. The only sound will come from the laptop speakers.
View 4 Replies
View Related
Jun 24, 2010
Im a composer and I loaded up on some excellent applications for music creation and notation- so excited..
I start with Rosegarden. Failed to connect to JACK audio server. Try my other applications, same problem.
Basically the JACK audio server just WILL NOT RUN (correctly). I can sudo it and press start, but still it wont "play with" the applications! Heres the error message from JACK (I also get related errors when I try to do ANYTHING involving music creation):
error JACK Audio Connection Kit
-overall operation failed
-unable to connect to server
Here is the "fatal error" from MusE
"Failed to Find Jack Audio Server"
This is the JACK output:
[Code]...
View 9 Replies
View Related
Apr 20, 2011
now half of the speakers plug is stuck in the back of my PC. cant get it out, because it's very deep. i decided to use the front jack for sound but it wont work.already tried alsa mixer and upgraded my kernel.i think the problem is that i need to somehow kill the jack in the back of PC because its still alive and sending signals to that half-dead jack
View 1 Replies
View Related
Jul 20, 2010
I'm a complete Linux newbie - only installed it yesterday, and have spent hours trying to get my M-Audio Firewire Solo sound card to work. I can hear nothing at all. I know nothing of Linux, but am willing to learn. While I learn though, it would be nice to listen to a little Hall & Oates. I've got to the stage where the error messages I'm receiving don't bring up any results on Google. Here's what things look like (watch out, big pic):
Those sample rate errors appear in the terminal when I start ffado-mixer. I'm running JACK with everything set as I think it's supposed to be, except that 'Realtime' is unchecked.If I start JACK running with 'Realtime' checked, it tries to launch and fails, saying "JACK is running in realtime mode, but you are not allowed to use realtime scheduling. After applying these changes, please re-login in order for them to take effect". I don't know what more it wants me to do - i've already added
@audio � rtprio 100
@audio - nice -10
@audio � memlock unlimited
to /etc/security/limits.conf, and selected the 2.6.31-11-rt kernel on GRUB bootup. I'm a member of 'audio' and 'disk' groups like'm supposed to be. Have I not got the connections right in JACK? Have I got some sample rate settings wrong somewhere?I'm not even bothered about low latency with the realtime kernel right now, I just want to hear some sound
View 1 Replies
View Related
Jul 5, 2011
I just upgraded some audio programs using a ppa and now there is no sound at all,i have been using hydrogen drum machine and ardour with jack audio and now there is no sound at all.
View 9 Replies
View Related
Jan 4, 2010
Just did a fresh install of Karmic, got all necessary decoders installed for video and audio playback...I think.
Problem is I can't forward/search in audio files I am playing. I mean I can only Play, Pause, Stop or "Next-track" a music file. Video files are fine.
I've tried Exaile, Rythmbox and even Totem. It is like the audio files are "half read-only".
If I drag a horizontal scroller in the music player and let it go, it will only jump back to the position where it is actually playing.
Has anyone experienced, this? I am a missing something in gstreamer or something like it?
View 4 Replies
View Related
Oct 6, 2010
Is it possible (by command line) to move forward to a time point in an audio file?
View 3 Replies
View Related
Apr 10, 2010
The Green jack for audio of the sound card is dead. The other jacks [Blue and Pink] are not working for audio. I have them working as audio outputs in windows xp-using the Realtek interface.How can I do the same in Ubuntu?
View 9 Replies
View Related
May 21, 2010
Question moved to the Studio area as I didn't know about it!
View 1 Replies
View Related
Mar 15, 2010
I am running Karmic (9.10) on an MSI U120 Wind. I dislike netbook-remix but that is beside the point.
Last night I made the biggest mistake of my life which is causing a loss of still counting hours. I decided to do an update, due to having enough bandwidth, and security updates to download.
So it finished, and I went to sleep.
This morning I went to plug in my speakers to the audio jack so I can listen to music loud, and it was all distorted. I changed al 8 or 9 volume controls and nothing. I unplugged the wire from the audio jack, and the sound is perfect on my netbook's speakers.
I have tried different wires, speakers, editing config files, removing and purging related packages, and nothing works...
I have been google-ing for hours and everyone seems to have the same problem, but all of the supposed fixes do not work for me...
Here is a pastebin of my Alsa info : [URL]
I fear switching back to winblowz..
View 1 Replies
View Related
Apr 16, 2010
whenever I try and start it, it spits this at me: p, li { white-space: pre-wrap; } Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info.its all greek to me I fiddled with some basic settings, but to no avail, I'm running a dell dimension 9150 with a stock soundcard. To be honest, I don't know what Jack is, but it opens when I open DJplay, so I'm guessing its like Asio4all when running deckadance?
View 1 Replies
View Related
Apr 20, 2011
happened and now half of the speakers plug is stuck in the back of my PC. cant get it out, because it's very deep. i decided to use the front jack for sound but it wont work.already tried alsa mixer and upgraded my kernel. i think the problem is that i need to somehow kill the jack in the back of PC because its still alive and sending signals to that half-dead jack
View 2 Replies
View Related
Dec 27, 2010
I have a 1080p video card installed via PCIe and can't seem to get sound to work on my big screen tv unless i use a audio jack and stereo.
View 7 Replies
View Related
Oct 19, 2010
both audio inputs (I use the integrated mic on my notebook) and jack-sense (integrated speakers/headphones) work properly, as they should. But after some time (from few minutes up to several hours) both of them cease to work simultaneously. After that the mic input levels turning gray and speakers don't work at all (when headphones were connected at that moment) or speakers don't mute when I connect my headphones (if headphones were not connected then). After I reboot, everything is okay again for some time, but then it happens again. Setting mixer levels manually with alsamixer doesn't help at all. I also tried different snd-hda-intel model settings in alsa.conf, but that just made things messed up, so I stayed with auto setting. This way everything (inputs/outputs/sense) works as should until it simply stops working.
It's maverick, ALC268, ATI Azalia (Intel HDA), alsa 1.0.23, but I had this problem with karmic and lucid as well when I tried them. Now I want to switch from Win7, but this is the only thing keeping me from it.
View 1 Replies
View Related
Aug 20, 2010
Desktop machine Dell OptiPlex 330n running Ubuntu Lucid 10.04 LTS.
Code:
Distributor ID:Ubuntu
Description:Ubuntu 10.04.1 LTS
Release:10.04
Codename:lucid
Code:
Linux IBDesk06 2.6.32-24-generic #41-Ubuntu SMP Thu Aug 19 01:12:52 UTC 2010 i686 GNU/Linux
It is Intel mobo.
Code:
chaitanya@IBDesk06:~$ lspci -v | grep Audio
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
The problem is, when I connect the headphones to the from panel audio jack, only right headphone works. Left one has no sound. But if I connect same to the main jack at the back of the machine, everything works fine. Both headphones have sound.
View 4 Replies
View Related
Aug 6, 2010
I have HP Pavilion laptop with two jack outs for audio and both of them work if only one is plugged in. If both of jacks are used, then in only one headphones set there is a sound. I would like to have sound on both of them, so for example two people can listen the same thing on their own headphones.
I'm working on Ubuntu 10.04 and my sound card is:
Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
View 2 Replies
View Related
Feb 26, 2010
I'm a long time lurker but only a fairly recent registrant, so I'm not sure exactly how it goes for posting links to your own blog, but I recently wrote an article about setting up Jack Audio with GStreamer, Flash and VLC and I thought that some people here might be interested to read it.
View 1 Replies
View Related
Jan 26, 2010
I actually pretty much abandoned Ubuntu a few weeks back after several weeks of not getting a couple things working properly.One of the big problems is I couldn't get my line-in audio jack working to save my life (despite working flawlessly in Windows on the same machine).I have posted about this numerous times and had no luck despite many of you good people attempting to assist.Tonight, I put a live CD of Linux Mint in my machine and noticed a few of the little problems I have with Ubuntu seemed to be "fixed" with Linux Mint.
That's when it hit me that perhaps the big difference is 32 vs. 64 bit? My Ubuntu is 64 bit but the Linux Mint I tested is 32. Does anybody think that my audio problem could be as simple as getting away from Ubuntu 64 bit?Also, can anybody tell me if there is a Terminal Services Client available for Mint? I'm sure there is but it didn't seem to be in the default install..
View 2 Replies
View Related
Feb 7, 2010
Why is there no opensuse jack audio client module for python like pyjack.
View 2 Replies
View Related
Apr 3, 2010
I have just migrated from windows to linux(Mandriva one 2010 with KDE4) and am a noob to linux.I Had never used Linux before. while everything is going on fine and am learning about it slowly. My problem is that though I am getting sound from my rear audio jack which is working perfectly, my front audio jack is not working at all. I am not getting any sound from it.... When in windows to disable front audio panel detection to get it warking. So I think there might be a similar workaround here... but that's just a guess. i am using a Gigabyte- GA31 MES2L motherboard which uses Realtek Audio Drivers.
View 2 Replies
View Related
Jan 18, 2010
I have used Linux off & on over the past 8-10 years, and last fall went full hog (no windows partition left!) on my IBM/Lenovo T61P (model 6457-B51) and am currently running Fedora 12 64-bit. It's been SOLID since last October. I did bail to the NVIDIA driver and the video performance is fantastic as well for my work usage of this system.
I have sound through the internal speakers and also through USB headsets, so it appears that pulseaudio, hated as it is, is working fine on this hardware. However, I CANNOT get any sound through the speaker jack! I get a hum anytime I attempt to use speakers connected to that jack - I have not tried a microphone on the mic jack, so I cannot speak to whether that works or not. This came to a head when I tried to play an audio file during a class and could not get the sound into the room speakers.
It's just odd that the OS is not able to talk to this port - this did work under Windows prior to my switch.
Worst case I guess I can find some USB speakers to use, but it would be handier to just plug into my guitar amp when I want some volume at home, and to be able to use other hardware as what happened last fall.
/sbin/lspci:
View 3 Replies
View Related
May 26, 2011
jack uses 2 ports for input and 2 for output. I have a SoundBlaster 5.1vx card, and I would like to use a "line-out" plug for monitoring. But when I try to get jack to reserve four extra outputs by using the switch "-o 4", it gives me an error.
View 2 Replies
View Related
Nov 10, 2010
I noticed that any CPU load, while using Rakarrack guitar effects, causes the sound to distort and it generates loads of noise. This actually happens when using anything while running Jack audio. If I'm recording, I get tons of noise on the recorded track when I play it back (and live when monitoring) because any CPU usage seems to interfere with the signals. It even does it live in the playthrough (monnitor).
I realized it had to do with CPU usage when I noticed a pattern with the noise correlating to the plasma CPU monitor widget I had running originally. The noise refreshed when the monitor did. Since then, I noticed that anything that puts a slight load on the system will cause this disruption (even moving a window around, or anything in the background processes).
Anyone who is experienced with Jack audio, and possibly rakarrack as well, know the cause to this? I figured loading a low resource WM and eliminating unneeded processes can help but it doesn't since the recording program itself, while recording, is enough to cause this problem. (I know this because playing the guitar in Rakarrack, without recording and just using Jack to run the sound to the speakers, doesn't have constant noise but when recording, there is a constant noise)
View 9 Replies
View Related
