Slackware :: Stuck With 640x480 Screen Resolution
Sep 7, 2010
I made a total reinstall of Slack 13.1 the other day and all went seemingly well. After a lot of experimenting and deciding I wanted the disk partitioned differently, a reinstall felt about right. But when I started X the resolution was all too low. xorg.conf was adjusted with the properties of my screen (GDM 4011P). Once upon a time, the Xorg config-tool would ask me my opinion, but now it flashes by and I have to live with what it comes up with.
The nVidia driver was installed (legacy for GeForce 3). I know the config is read, because it fails parsing if I have kHz with the sync-figures. But it otherwise disregard my wish to run at 1280x1024. In XFCE I can run the nVidia configuration tool, but it offers only auto, 320x240 or 640x480. The screen is too small for me to click "ok" on several occasions. The machine is capable of 64bit, 2GHz. But I installed the 32bit version of 13.1, it has 1,5GB RAM.
View 8 Replies
ADVERTISEMENT
Jun 14, 2010
I am a first time user and recently installed 9.10 from a LiveCd then immediately upgraded to 10.04 LTS. I had no black screen problem, but my resolution is stuck at 640x480 with no other options. I upgraded my driver to NVIDIA-Linux-x86_64-195.36.31 and the resolution remains the same. I have a Geforce GTS 250 and an Acer H233H capable of 1920x1080_75.
My XFile:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder62) Thu Jun 3 09:41:37 PDT 2010
# xorg.conf (X.Org X Window System server configuration file)
# This file was generated by dexconf, the Debian X Configuration tool, using values from the debconf database.
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
# This file is automatically updated on xserver-xorg package upgrades *only* if it has not been modified since the last upgrade of the xserver-xorg package .....
I have tried entering a CVT generated modeline to the xorg file but it did nothing.
View 2 Replies
View Related
Oct 20, 2010
I have a BIG issue with my fresh Maverick install : when I install proprietary drivers via the graphic utility, either one proposed, the screen resolution is then max in 640x480. But I have hardware acceleration and compiz effects !
I tried, I think, everything. Forcing the resolution in xorg, in monitors.xml, try the newest ones via the ppa, install an older (and used to be working I'm positive) one with .run (which just prevent any graphic display).
View 9 Replies
View Related
Feb 10, 2010
I am test driving Ubuntu 9.04 (Desktop) - the screen resolution always pops up as 800 x 600 - Preference Display tells me there is a different graphics driver (which I have installed) and set to 1280 X 800 which then works till I re-boot. I changed it in NVIDIA X Server Settings. When I try to save to X configuration I get a message "Unable to create new X config backup file '/etc/X11/xorg.conf.backup'." - which I presume is because I am not in superuser mode - how do I set up a superuser account (is this even possible?) or is there a nioce simple way for a real newbie to fix this?
View 3 Replies
View Related
Jun 13, 2009
Just installed 5.3 into a VMWare image.
In System > Preferences > Screen Resolution I only get 640x480 option.
How do I get 1024 x 768?
View 2 Replies
View Related
Apr 27, 2010
I use slackware 13.0 64bit and VGA EN9400GT, I have two monitor samsung that is: SNX(CRT-0) && 943SNX(CRT-1) series, i had try setting it in nvidia X server settings but the resolution as CRT-1 only have 2 options that is: 640x480 & 320x240. this is my xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (buildmeister@builder58) Fri Mar 12 02:13:46 PST 2010
[Code]....
View 14 Replies
View Related
May 8, 2011
VLC can open my webcam using the Media → Open Capture Device menu. However, how do I control the webcam capture resolution? It seems to be stuck at 640x480.
View 1 Replies
View Related
May 21, 2010
I installed 10.04 on my former windows box last night, and I seem to be stuck at a screen resolution of 1024x768. I have a Geforce 7600 GT graphics card, and I installed current drivers via the hardware drivers option. I can't go above this resolution in the nvidia x-server settings, and even xrandr says the highest resolution I can use is 1024x768. What is up with that, and how can I change it?
View 1 Replies
View Related
Dec 5, 2010
I have install linux mint 10 on my system.After all installation finish,the screen resolution is stuck at 800 x 600(4:3).No matter how I try,just could not set the screen resolution to 1024 x 768. Below is system information for your kind assistance.
-Computer-
Processor: Intel(R) Pentium(R) 4 CPU 1.80GHz
Memory : 765MB (254MB used)
Operating System: Linux Mint 10 Julia
User Name: oem (oem)
-Display-
[Code].....
View 10 Replies
View Related
Mar 31, 2011
I've installed CentOS 5.5 on my Acer Aspire One D150. It uses the Intel integrated graphics chip GM945 which isn't supported "out of the box" by CentOS. My screen resolution has defaulted to 800x600, but it should be 1024x600. tried xrandr, and editing the xorg.conf file, and now have gone down the rabbit hole of trying to install xf86-video-intel and its associated dependencies (nested like Russian matryoshka dolls). I'm at the point of trying to install xorg-server, but am getting hung up by its dependencies on xproto and fontsproto, despite having installed them.
View 5 Replies
View Related
Feb 11, 2010
So yesterday, I my power went out on my desktop and when I rebooted, the screen resolution was stuck at 640x480. When I go to the display settings, no other higher options are available. Any suggestions?
View 1 Replies
View Related
Jan 14, 2010
I have just installed Ubuntu 9.10 Karmic on my HTPC, and it detected my TV (connected via DVI, so is a monitor effectively) OK, and displayed the proper resolution of 1360 x 768. I want to use the proper nVidia drivers which I've enabled using the restricted drivers tool in Ubuntu. On doing this, it has set the resolution to 640 x 480, and the nVidia configuration tool will not let me set it any higher.
1. The contents of xorg.conf are now irrelevant as of the last few versions of X?
2. The nVidia software is not reading the EDID information from my TV properly?
View 2 Replies
View Related
Sep 16, 2010
I am stuck at 1024x768 in Ubuntu 10.04 with the nVidia GeForce 7100. I installed the drivers suggested by nVidia on their website, but it doesn't seem to heighten my resolution any. 1024x768 is the highest which appears in nVidia X Server Settings.
Xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 256.53 (buildmeister@builder101) Fri Aug 27 21:34:01 PDT 2010
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Configured Keyboard" "CoreKeyboard"
[Code]...
Is there a way to fix this without having to buy a new card? I've read that the GeForce 7100 is pretty crappy, but I've got no money to space at the moment.
View 9 Replies
View Related
Aug 12, 2009
I am running fedora 11 live cd on a work computer waiting on a new harddrive. Ran knoppix and Gos 3.1 fine. they start at 800x600 but can relatively easily be changed to much better but fedora likes this really low resolution on the monitor 640x480. In Gos I unhide screens and graphics and change it there but fedora doesn't seem to have this basic setting utility. Where is it in fedora or its equivilant. The basic monitor setting only offers the 1 option and even this box is not fully visible, ok and cancel are cut off at the bottom. Going back to Gos for now, though someone managed to crash it while surfing the net. mATX Via chipset p4m800 s3 unichrome graphics. linux loads vesa drivers instead of s3 unichrome drivers.
View 1 Replies
View Related
Jan 2, 2010
My Ubuntu can not go any higher then 640x480. I have found out what the problem is. The monitor has broken down (firmware or some thing) but still works fine in Windows. How do i know this ? Well a few mouths ago i was on Windows Me and one day it booted up saying that it is installing a default driver for the screen , so i let it do and after it did that it would never use the VA702 driver. Also the resolution could get higher then 1280x1024(this is the screens biggest res). A other mouth later i installed Windows XP and when using it i tried to install the VA702 driver but it did not work so i had to manually install it which worked but did not get correct resolutions e.g. could go higher than the monitor is meant to go. Now in Ubuntu can't go higher then 640x480. How can i fix this ?
Screen : ViewSonic VA702
Graphics Card : Winfast My Vivo A170 Geforce 4 MX 440 AGP 4x 64MB DDR
Ubuntu:9.10
View 2 Replies
View Related
May 24, 2010
Resolution won't go higher than 640x480 with a TV
View 1 Replies
View Related
Nov 8, 2010
İ have nvidia fx 5200. when i was install my driver resolution stack at 640x480 and i cant change to 1024x768.
View 1 Replies
View Related
Aug 25, 2010
I have on old Thinkpad T42 with the Mobility Radeon 7500 graphics chip. It used to work like a charm with the open source radeon driver, until KMS came along. It had no problems except for fullscreen being always black. I thought this is because I have an old card, and used 'nomodeset' in the kernel line, which strangely cranked up the memory usage and made the system choppier, but I managed. Today I was testing the use of an external monitor at home, and found out not only that it only works properly with KMS enabled, but fullscreen games work like a charm (e.g. DOSBox, which I use a lot).
After experimenting a bit, I found out that on the internal display (LCD), 640x480 produces a black screen, while others work as expected. so i set dosbox to use 800x600 as the fullscreen resolution, and it works. The problem is that there are a lot of games (and apps) that I use which provide no configuration options to set the resolution, so I end up with a black screen (when I'm using the internal display, of course). Bottom line: I'm not asking for anyone to fix my problems from a distance, basically blindfolded.
View 7 Replies
View Related
Jan 10, 2011
Just upgraded from Etch and now I'm stuck at 640x480 resolution. Xorg.conf doesn't show any display modes, and xrandr gives the only resolution as 640x480. The laptop is a Toshiba Tecra 730XCDT. I know its a doorstop, but 800x600 worked fine under Etch. Anyone know how to to change it back? It's really hard to look at right now.
View 3 Replies
View Related
Apr 23, 2009
I've finally managed to get the nvidia driver on my Lenny box. However I've now found that I can't change resolution from 640x480, the nvidia panel shows this and 320x240 as the only resolution. The layout shows "hidden as under 600 pixels" If I go to gnome screen resolutions it only shows 640x480. If I plug a second monitor in it won't detect it.
I'm using NVIDIA-Linux-x86-180.51-pkg1.run, older versions appear not to work with Lenny crashing x on boot. How to change resolution on the nvidia in Lenny?
View 5 Replies
View Related
May 24, 2010
I have a FX 5200 and a 26" TV with VGA input which supports 1330x760. No problem with this in Windows, but in Ubuntu, as soon as I install nvidia drivers (175) resolution goes 640x480.
I've tried editing xorg.conf in several different ways, but resolution didn't change, maybe I was doing it the wrong way.
PD: 10.04 Lucid Lynx fresh install
View 1 Replies
View Related
May 17, 2010
I have just installed Ubuntu Server 10.04. With Version 8.04 I had no problem to change the resolution from 640x480 to 1440x900 (console, no GUI installed). With 10.04, it does not work, the only resolution that works is 640x480. I have tried the following:
Changed: GRUB_GFXMODE=1440x900
Result: Success, Grub comes up with 1440x900, but when booting, the resolution changes to 640x480
Changed: GRUB_GFXPAYLOAD_LINUX=1440x900
Result: Booting -> blank screen > automatic reboot
Changed: GRUB_GFXPAYLOAD_LINUX=keep
[Code]...
View 5 Replies
View Related
Apr 6, 2010
I've upgraded from Slackware 11 to 12.2 and now my mouse cursor just sits there in the middle of the screen! I've managed (using the keypad to move the mouse cursor) to edit the /etc/X11/XF86Config config file, but all to no avail. I've googled for an answer but I don't understand all the talk about "blacklist". I've got a Pentium 4, 101 keyboard, ps 2 mouse.
View 2 Replies
View Related
Feb 10, 2010
I am RHEL 5. I just installed it and when i try to config display it how only two resolution by default 640x480,800x600.No other resolution option is shown. I tried by editing xorg.conf but of no use.
View 2 Replies
View Related
Jan 23, 2010
I have a fujitsu siemens monitor C776 (built by Hansol E17CL)
FC12 can't autodetect it
If I go system -> preferences -> display the button: detect monitor does not work
I can't change resolution which is stopped at 640x480:
View 1 Replies
View Related
Jun 7, 2011
I've installed Slackware 13.37, it's working well in general There is no xorg.conf file How do I get it to remember my screen resolution? (I'm using a CRT monitor and often adjust the default resolution) Having to change the resolution after each startup is not ideal I tried using my old xorg.conf file from Slack 12.2 with my resolution settings.
View 2 Replies
View Related
Apr 8, 2010
When i startx, the resolution of the kde is 1280 - that's awful, for my monitor it needs to be 1152x864, so everytime i startx my slackware i have to go to system settings and set the proper resolution...
What should i do in order to set one resolution-size so it will keep it that until i changed it, and everytime i start the X i will be that type of resolution ?
View 2 Replies
View Related
Mar 8, 2010
I am unable to change mu screen resolution in slackware 12.2. I am editing the xorg.conf in "etc/X11/" with nano. My graphics card is a ATI with 64MB RAM. My monitor is capable of 1280x1024 @ 60Hz. Heres the xorg.conf:
Code:
# File generated by xf86config.
# Copyright (c) 1999 by The XFree86 Project, Inc.
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions: .....
View 2 Replies
View Related
Feb 19, 2011
I am loving Slackware, but my Westinghouse monitor is having a hard time recognizing the screen resolution. After typing in startx, I get a black screen. I can plug my box into my trusty test monitor, change the res to a config that the Westinghouse will recognize,then switch monitors and all is fine.How can I edit the res and have Slackware remember the settings? This happens every time I reboot. I am logging in as root, I have not added a user yet at this point.
View 3 Replies
View Related
Sep 17, 2010
Is there a way to determine the native resolution of the current console display device from the shell?
I know I can get the current console settings, but I'm looking for the native screen size of the display hardware, whether or not it conflicts with settings.
View 6 Replies
View Related
