I have a problem with mediatomb. I installed it from official ubuntu repo and when someone is trying to get some audio files via UPnP there are visible only namefiles istead of title from tags. It strange because MediaTomb provides album covers from tags, but no album, genre or title. How do I configure that ? MediaTomb from repo has taglib support but no id3lib.
View 2 Replies
i've looked at serveral post all over the net but still can't get subtitles (.str files) to bind with the stream on mediatomb.
Mediatomb works fine with out the subtitle transcoding profile, but when added and mediatomb is restarted using sudo /etc/init.d/mediatomb restart I get the response "Fail" and Mediatomb will not start. If I change <transcoding enabled="yes"> to "no" then mediatomb works fine
Below is my config.xml
Quote:
<?xml version="1.0" encoding="UTF-8"?>
<config version="1" xmlns="url . url
xsi:schemaLocation="url 1 url
<!--
Read /usr/share/doc/mediatomb-common/README.gz section 6 for more
code....
which vanilla kernel version provide support for QM57 chipset?
View 1 Replies View RelatedI'm looking for sm-notify, which should be part of nfs-utils, but isn't.
I need this for NFS over TCP failover. Where can i find it?
I use the script h264enc (installed from the repos) to encode my dvds into avi and mp4. It was working flawlessly under 9.10, now I get the error that MEncoder doesn't support AAC encoding? I have installed all the restricted drivers and I can play dvds, mp4's, .
View 8 Replies View RelatedUbuntu LTS 8.04 + DHCP. Works fine except for fixed addresses. I mean all devices which need to get fixed IP according to their MACs don't get them and keep to receive random IPs from the range (almost everytime all machines receive the same IP they got from DHCP for the first time).
View 2 Replies View RelatedUbuntu LTS 8.04 + DHCP. Works fine except for fixed addresses. I mean all devices which need to get fixed IP according to their MACs don't get them and keep to receive random IPs from the range (although almost everytime all machines receive the same IP they got from DHCP for the first time).
The following config was created by Webmin interface.
At the one of the ubuntu forums i was advised to carry host description out of the subnet description.
I had this setup and working before with some help, so I know it is possible.I want to use Mediatomb to transcode a Shoutcast NSV stream on the fly so I can watch it on my Playstation. I know I can use both mencoder/mplayer and VLC for the transcoding.I am running Ubuntu server 9.04 with the latest Mediatomb from the repo.
View 3 Replies View RelatedThanks to a previous post by a member here I got mediatomb up and running. However when I attempt to add my (username) file to the directory to access from my phone I get the "permissions denied" prompt. Is there any way to allow access for MediaTomb so I can access my files?
View 9 Replies View RelatedI found a strange problem when I use gdb in eclipse to debug. When I step in the program, the register RIP(I'm using x86_64 machine and that's EIP in 32 bit mode) shows correctly but the line stepping in the source code may be far from the correct line. For example, when there is no loop in the source code, the RIP keeps on increasing and the current instruction pointer goes back to several lines back. I'm sure the source code is the right one because I when I checked the memory and local variables after several lines the values are all correct. The source code has many empty lines and does it matters with GDB?
View 3 Replies View RelatedI am very new to Ubuntu or any Linux for that matter. I am tring to get Mediatomb to work on my system. I have installed the packages and mediatomb appears to be running fine. The problem is that I have an external hard drive that I want my files to be kept on. When I try to add the folders on the external I get the following error:Error: Could not list directory /media/TeraByte : Permission Denied.TeraByte is the name of the volume, I have created shared folders on the Volume, but I can't seem to get anywhere with this
View 9 Replies View RelatedI know this has been talked about a lot but im not quite understanding how to handle it. I have mediatomb i turn my ps3 on search for server pick it up I can play all of my .avi files fine but when i go into audio > All audio it just says there are no titles so that the mp3 files show up and i can play them. And as well why does mediatomb not work when the terminal is not open. I open terminal type mediatomb then when i close it says disconnected from media server.
View 2 Replies View RelatedI have been using media tomb for a long time now to stream HD movies to the PS3 , its worked perfectly....until now . I use MKV2VOB so the PS3 can play the video and so mediatomb has no transcoding to do. But now when i add the video to the media tomb database the PS3 finds the server, can search through all the folders but when i arrive at the place where the movie should be it says there are no videos. I have been looking about and trying to see what the problem could be. I have checked that <protocolInfo extend="yes"/> is added to the server config file and thats about all i can find on the problem. The thing i don't understand is that i have changed nothing, and that the server must be running as i can search the folders etc.
I am running Ubuntu 9.10 and mediatomb v0.12
I have run into this problem that really bugs me now.
I have installed mediatomb on my Ubuntu box, and it has been working fine for a while now.
This morning I installed 'Gnome subtitles', and had to wrestle a bit with is to make i work (gstreamer-stuff).
Now all of a sudden, my good old mediatomb has begun to seg-fault on importing new videos.
I have tried the following:
run ffmpeg -i -> no errors
run ffmpegthumbnail -> no errors
disable all transcoding in config.xml -> no fun
disable thumbnails in config.xml -> no fun
switch to mysql DB - tables are created all right, but still -> no fun
[Code].....
I have Debian Testing. My theme is Equinox Light and it was working well except for "Passwords and Encrypton keys" app (Version3.02). That doesn't bothered me. But after todays upgrade from gnome-terminal (2.3.2-1) to gnome-terminal3 Equinox theme doesn't work. My themes are installed in /usr/share/themes folder. It doesn't matter if i copy them to my home theme folder. It seems that gnome3 apps doesn't support
Reverting to previous version fixes the problem but i want to have version 3 with nice theme. Ho w can i achieve it?
I have been running mediatomb for a short while, mainly to play my CD collection on the internet radio. The served is a x86_64 running OpenSuSE 11.1On jan 4 it ceased to work; the /usr/bin.mediatomb file vanished, and eversince I have been unable to get it going. i am using sqlite version.Anyone else got this proble? And even more importantly, how do i get the thing working again? I seem t have lost the db as well and it is not regenerating either
View 8 Replies View RelatedHow can I have mediatomb access my music and video folders? When I attempt to access "Music" for example, going through /home, I receive this error:
"Error: could not list directory /home/samwise : Permission denied"
Is there a way to give permission to mediatomb to access them? Or is there a way to access them another route because they are shared?
I am using KNetworkmanager-vpnc to VPN back to the office from home, the vpn connection works fine - for 15 minutes then I am disconnected. I am fairly certain that this is related to the Phase 1 key lifetime limit. The Knetworkmanager-vpnc GUI does not provide a location to enter this information. I think I found the config file that holds the connection information at /home/<user>/.kde/share/apps/networkmanagement/connections/ I just don't know the proper syntax to put in the file to specify a key life limit. Anyone out there know how to do this? I am using Fedora 14 x64 with knetworkmanager-vpnc 1.0.9-0.28.
View 1 Replies View Relatedi followed this thread and got mediatomb on my ubuntu 10.04 lucid running. i have a samsung UE-32B7020 tv.
the only problem is that for .avi and .mp4 movies (these are the ones i tried), fast forward and rewind do not work. transcoding is not enabled.
I had originally planned on buying a USB 2.0 audio interface to use with my first home recording studio, but it sounds like Linux support is pretty horrible for these devices. On the other hand, the FFADO project seems to be very promising, so now I'm looking at getting a firewire interface. The only problem is that all I have on my laptop (sony vaio VGN-N365E) is a little 4-pin firewire port. If I'm not mistaken, those don't provide any power. Will this work with any interfaces (maybe one that has it's own external power adapter)? Or is there an adapter I can get to convert it to a full firewire port and add power?
View 2 Replies View RelatedI have a Samsung Jet S8000, which reports to have the following bluetooth services: Headset, Handsfree, Bluetooth stereo headset, Serial port, Dial-up, Basic printing, File Transfer, Object push, SIM access, Phonebook access. When I search for bluetooth devices and find my notebook (kubuntu 10.04, kbluetooth installed), my phone reports that this device (i.e. the notebook) has only the Object push bluetooth service. Whereas Windows (without installing any software) offers to use my mobile as a modem, to browse its content, to be a handsfree headset, etc...
From my phone I can send files to the notebook, but I need to make about 4 trials to succeed once - in the other 3 cases the file sending process stops on the phone with a 'Sending failed' message...What is the problem with this? Where should I debug? What software should I install to have full access to my phone? Is there an app to easily synchronize my phonebooks? bitpim and gnokii don't seem to support this phone.
I have googled it before however when I finished everything there were a bunch of errors any1 know good way to do it? Running debian lenny.
View 2 Replies View RelatedI saw many linux OSes have a smooth stability with sun virtualbox.for example VBoxaddons already initially installed.I installed fedora 12 x86_x64 (within vbox in xp64bit)but only 800x600 resolution is avaible.Smooth Mouse jumping from Pc to vbox etc.
1.is there any good installer that have already packages initially installing for virtualbox ?
2.Which version listed below have x64 kernel?
I made a full install of Slackware and have been using one of my boxes as an Apache web server. I recently tried to install Joomla, the PHP CMS software, and when I ran the pre-install requisite checker (The second step of the installation), the installer notified me that I do not have MySQL support. I find this especially strange as I've made webpages using PHP that made use of MySQL databases.
My pre-post research has lead me to several other people with the same problem. Half were using windows, and just had not uncommented the "extension mysql.so" line in the php.ini file. The other half solved their problem by installing their distro's php-mysql module. According to what I'd read, you can still use MySQL if you don't have that module installed, but Joomla does need it to be able to use the MySQL database.
I've searched long and hard for this plugin/add-on/module for Slackware, but to no avail. It's available in RPM format, and I know that it's possible to use rpm2tgz to convert these files, but I don't know exactly what the issue is, and if Slackware may be different. I don't want to install that and then find out that it overwrote something that I'd needed.
The default Pidgin installation does not provide me with the option to create a MSN account. Is this normal? Must I install an additional library?
View 4 Replies View RelatedCamangi WebStation (android pen tablet)
Incredibly poor Wifi connectivity (No WPA, not even WEP full support), missing ether plug. Easy to freeze. Poor input method. Considerable pricing. poor applications. (not android-market compatible) not well organized web pages.
My impression: You have a right to buy. It is up to you, if you want to. It is your responsibility.
why my ubuntu 9.04 doesn't start in a full screen , it starts with low resolution , i have to press the button with two screens (i don't know what it's called ) on the keyboard so it comes back to normal .
laptop : dell latitude e5500
os : ubuntu jaunty 9.04
My current version is
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=8.10
DISTRIB_CODENAME=intrepid
DISTRIB_DESCRIPTION="Ubuntu 8.10"
Whenever I try to pla a video in full screen mode, it crashes. How can I fix this?
This obnoxious bar has just appeared in Smplayer at the top of the screen. It stays there even when I go full screen. Now full screen isn't full screen and there are black edges on both sides of the screen. I have not be able to figure out how to hide it. I do not need or want this onscreen display. How can I configure Smplayer to make this go away? How can I get my 16:9 full screen aspect ratio back? I have done nothing to mplayer or smplayer as far as editing any or changing any configuration files. I tried several videos and it displays on all of them. It was not there last time I used Smplayer.
View 9 Replies View Relatedi'm curently compressing a big 100GB file with 7zip on a system with an intel 2,66Ghz quadcore processor. Allthough 7zip uses 4 cores to compress the file, it still uses only about 40% of the cpu performance. The cpu isn't doing anything else, nothing heavy anyway.
I started compressing 8 hours ago and the compression is currently 47% done. Reading and writing the files isn't very fast so my harddrive isn't slowing the process down.
So what's the holdup? There is still 53% of work to be done. Is it for some reason impossible to do this faster?
