Software :: Apache2 And Full ASP Support
May 4, 2010I have googled it before however when I finished everything there were a bunch of errors any1 know good way to do it? Running debian lenny.
View 2 Replies
ADVERTISEMENT
Programming :: Unable To Configure Apache2 With Python Support
May 31, 2011I'm unable to configure the apache2 with python support. I have done the configuration in the following method, but unable to start the python cgi support: I have installed the libapache2-mod-python it has installed python.load in the mods-available directory. In the apache2/sites-available/default file, I have added the following lines.
[code]...
when I request for a python script in the py folder. I get a 404 Not found error.
Server :: Apache2 And Frontpage Support - Can't Find The Correct Files?
Jun 28, 2011i want to ask for a guide how to install frontpage extensions on apache2 , i searched a lot but i can't collect the pieces , in the most cases i can't find the correct files..
View 5 Replies View RelatedFedora Installation :: X64 Installer With Virtualbox Full Support
Apr 24, 2010I saw many linux OSes have a smooth stability with sun virtualbox.for example VBoxaddons already initially installed.I installed fedora 12 x86_x64 (within vbox in xp64bit)but only 800x600 resolution is avaible.Smooth Mouse jumping from Pc to vbox etc.
1.is there any good installer that have already packages initially installing for virtualbox ?
2.Which version listed below have x64 kernel?
Ubuntu :: Get Full Bluetooth Support For Samsung S8000?
Aug 19, 2010I have a Samsung Jet S8000, which reports to have the following bluetooth services: Headset, Handsfree, Bluetooth stereo headset, Serial port, Dial-up, Basic printing, File Transfer, Object push, SIM access, Phonebook access. When I search for bluetooth devices and find my notebook (kubuntu 10.04, kbluetooth installed), my phone reports that this device (i.e. the notebook) has only the Object push bluetooth service. Whereas Windows (without installing any software) offers to use my mobile as a modem, to browse its content, to be a handsfree headset, etc...
From my phone I can send files to the notebook, but I need to make about 4 trials to succeed once - in the other 3 cases the file sending process stops on the phone with a 'Sending failed' message...What is the problem with this? Where should I debug? What software should I install to have full access to my phone? Is there an app to easily synchronize my phonebooks? bitpim and gnokii don't seem to support this phone.
Ubuntu Multimedia :: MediaTomb Doesn't Provide Full ID3 Tag Support / Get That?
Aug 20, 2010I have a problem with mediatomb. I installed it from official ubuntu repo and when someone is trying to get some audio files via UPnP there are visible only namefiles istead of title from tags. It strange because MediaTomb provides album covers from tags, but no album, genre or title. How do I configure that ? MediaTomb from repo has taglib support but no id3lib.
View 2 Replies View RelatedSlackware :: Slack Full Install - Joomla Says No Mysql Support
Jan 29, 2010I made a full install of Slackware and have been using one of my boxes as an Apache web server. I recently tried to install Joomla, the PHP CMS software, and when I ran the pre-install requisite checker (The second step of the installation), the installer notified me that I do not have MySQL support. I find this especially strange as I've made webpages using PHP that made use of MySQL databases.
My pre-post research has lead me to several other people with the same problem. Half were using windows, and just had not uncommented the "extension mysql.so" line in the php.ini file. The other half solved their problem by installing their distro's php-mysql module. According to what I'd read, you can still use MySQL if you don't have that module installed, but Joomla does need it to be able to use the MySQL database.
I've searched long and hard for this plugin/add-on/module for Slackware, but to no avail. It's available in RPM format, and I know that it's possible to use rpm2tgz to convert these files, but I don't know exactly what the issue is, and if Slackware may be different. I don't want to install that and then find out that it overwrote something that I'd needed.
General :: Camangi WebStation - Incredibly Poor Wifi Connectivity - No WPA Not Even WEP Full Support
Nov 11, 2010Camangi WebStation (android pen tablet)
Incredibly poor Wifi connectivity (No WPA, not even WEP full support), missing ether plug. Easy to freeze. Poor input method. Considerable pricing. poor applications. (not android-market compatible) not well organized web pages.
My impression: You have a right to buy. It is up to you, if you want to. It is your responsibility.
SUSE :: Apache2 Reload Error Cannot Load /usr/lib64/apache2/mod_dav_svn.so Into Server?
Nov 19, 2010I have suse10 64 bit installed. I am setting up a svn server on it. After installation and adding the modules ,while reloading the apache2 it's throwing the error as: HTML Code: httpd2-prefork: Syntax error on line 113 of /etc/apache2/httpd.conf: Syntax error on line 31 of /etc/apache2/sysconfig.d/loadmodule.conf: Cannot load /usr/lib64/apache2/mod_dav_svn.so into server: /usr/lib64/libsvn_subr-1.so.0: undefined symbol: apr_memcache_add_server
View 9 Replies View RelatedDebian :: Apache2 Start Error Starting Web Server: Apache2[Wed Dec 09 15:36:40 2009] [warn] NameVirtualHost?
Dec 9, 2009I am getting this error
Starting web server: apache2[Wed Dec 09 15:36:40 2009] [warn] NameVirtualHost XX.XX.XX.XXX:80 has no VirtualHosts(99)Cannot assign requested address: make_sock: could not bind to address 68.178.232.100:80
no listening sockets available, shutting down Unable to open logs failed!
also what is 68.178.232.100
General :: Error While Starting Apache2 / Syntax Error On Line 113 Of /etc/apache2/httpd.conf?
Nov 19, 2010I have suse10 64bit and I was setting up SVN server on it. After all required setup while reloading apache2,its giving the error:
Code:
httpd2-prefork: Syntax error on line 113 of /etc/apache2/httpd.conf: Syntax error on line 31 of /etc/apache2/sysconfig.d/loadmodule.conf: Cannot load /usr/lib64/apache2/mod_dav_svn.so into server: /usr/lib64/libsvn_subr-1.so.0: undefined symbol: apr_memcache_add_server
General :: Configuration Error In Apache2 / "cannot Adjust Apache2 Service" Error?
Mar 11, 2011Installation of SUSE 11 server now when I try to configure apache2 (opening port 80) I get a "cannot adjust apache2 service" error??? Can anyone shed some light on this.
View 1 Replies View RelatedServer :: Driver Support - QME2572 - Qlogic - Card Became Support By The Kernel
Jul 10, 2011I'm trying to find out when QME2572 (Qlogic) card became support by the kernel. We have a RHEL 5.1 system that is moving to new hardware, however the kernel at this release doesn't support the new hardware, due to the Qlogic card change. I tired the Redhat KB and Bugzilla. Is there a Kernel change list etc I can search. Never really played around with the kernel too much so I'm just after some pointers for looking up this information. Offically its not supported until Redhat 5.3, I'm trying trying to research kernel info so I can tell the customer they have to upgrade.
View 3 Replies View RelatedGeneral :: Ubuntu Can't Support A Higher Resolution That Laptop Can Support?
Apr 14, 2010I have a HP laptop which can support 1600x900. But after I install ubuntu 9.10 on it, it can only support up to 1280x700. My laptop has a Nvidia graphics card. And i am using GNOME as my desktop environment.
View 1 Replies View RelatedDebian :: EXFAT Support Vs NTFS Support ?
Aug 25, 2010I'm looking to dual-boot Windows 7 and Debian 6 upon its release on my sister's laptop. I want to share a partition between the two of them so that /home points to this directory and the Windows equivalent also points to it (C:Users).
Anyway, I've heard good and bad things about the NTFSMount driver (I think it's NTFS-3G now) and the NTFSprogs project and so I am not so certain what I should believe. I do know that NTFS has relatively high overhead, though I do not recall the source of this assertion, so I am considering the use of EXFAT. An open source EXFAT project is hosted on Google Code at [url] and it utilizes the kernel module FUSE.
I'm quite certain that I've got everything covered on the Windows side -- that is, I know that both NTFS and EXFAT will be suitable filesystems for my required usage.
My issue is that I'm curious which will have superior performance and stability in Debian. I planned on building the package from source and mounting the device in my FSTAB but I have also found a PPA for Ubuntu on Launchpad at [url] that I could borrow the debian/rules from and make a .deb package from.
What do you guys think? Should I go at it with the EXFAT or NTFS partitioning? Is NTFS-3G actually fairly supported at this point? Or perhaps should I consider some alternate method?
I have also considered that the only files she will be sharing are those of music, videos, and pictures so it could be better to just link /home/xxxx/Pictures (Music and Videos, too) to the new partition instead of all of /home.
Software :: Support For Wi-fi Midi Support In Linux?
May 11, 2011I would like to know if it is possibile to have support for wi-fi midi support in linux.
View 1 Replies View RelatedOpenSUSE Multimedia :: Obnoxious Bar In Smplayer - Full Screen Isn't Full Screen And There Are Black Edges On Both Sides Of The Screen
Jan 25, 2011This obnoxious bar has just appeared in Smplayer at the top of the screen. It stays there even when I go full screen. Now full screen isn't full screen and there are black edges on both sides of the screen. I have not be able to figure out how to hide it. I do not need or want this onscreen display. How can I configure Smplayer to make this go away? How can I get my 16:9 full screen aspect ratio back? I have done nothing to mplayer or smplayer as far as editing any or changing any configuration files. I tried several videos and it displays on all of them. It was not there last time I used Smplayer.
View 9 Replies View RelatedGeneral :: /tmp Full - But Not Full ?
Oct 20, 2010My server is showing as 95% full, but when I check any folders underneath and files, they add up to about only a few percentage of the space.
- /tmp - 2GB LUN
- currently using 1.8GB of the 2GB
- files in the directory add up to only 50MB (I've checked for hidden files as well.. 'ls -lah'
Anyway else of telling how /tmp can have so much usage when there appears there is hardly anything in it?
What will happen to the server if /tmp is full?
Ubuntu :: KTorrent Is Full Screen And Won't 'Un-Full-Screen'
May 2, 2010In Ubuntu 9.04 and 9.10, KTorrent worked just fine for me. However, this time whenever I launch it, it is for some reason full screen and I have no idea how to get out of full screen.it's of the entire screen when KTorrent is in focus (so no panels or other things were cut out of the image).URL...
View 4 Replies View RelatedSoftware :: Finding Textbrowser With JavaScript Support Or Elink Javascript Support?
Sep 1, 2009I need a textbrowser with Javascript Support. I have compiled the elinks stable 0.11x and the unstable 0.12x version mit JavaScript Support (js moz dev). Both browsers can be started and showed websites normaly. But no javascript, even simple tests like [URL] failed. I started elink with ./elink and typed then the url.
View 4 Replies View RelatedUbuntu :: Set Up SSL On Apache2?
Jul 31, 2010I have my own website running on my Ubuntu 10.04 server using Apache2. I have a log in page that I would like to use ssl (https) on. I have set up quite a few websites using virtual hosts, but I have never messed with ssl. I know you have to generate a certificate using openssl (which i have installed). I have been trying to find some tutorials online, but everyone of them is different...and nothing seems current.
View 1 Replies View RelatedGeneral :: What Does Apache2 -k Switch Do
Mar 5, 2009Does anyone know what the -k switch does? i.e., apache2 -k restart? I can't get much out of google but on my sarge based web server it's only with the -k switch that a restart actually works.
View 3 Replies View RelatedOpenSUSE :: Where Is The Man Pages For Apache2 In 11.3
Aug 3, 2010I installed apache2 with 'zypper in apache2 apache2-doc' and there's no man pages,
tried
man apache2
man apache
man httpd
Software :: Apt-get Broke Apache2
Sep 23, 2009I have a pseudo test server that I irresponsibly let both a need for develop and running of Sid (unstable) version of Debian.
The long story short of it is I was playing around with functions that needed newer versions of software than was available in the stable release so upgraded. That was a done deal and has been working fine for many months. I then needed to upgrade a particular file for an unrelated service and did the dumb move of a full apt-get upgrade. Well in the 800 or so files it updated, one of them has broken Apache.
Apache will start from the command line (/etc/init.d/apache2 start) without any errors, but when I try to navigate to any page it serves I get "500 Internal Server Error".
Looking at the error log I see:
Code:
[Wed Sep 23 11:02:28 2009] [notice] Apache/2.2.13 (Debian) DAV/2 PHP/5.2.11-1 with Suhosin-Patch mod_ssl/2.2.13 OpenSSL/0.9.8k configured -- resuming normal operations
[Wed Sep 23 11:02:31 2009] [error] [client 192.168.1.1] SoftException in Application.cpp:221: File "/Forum//index.php" is not in document root of Vhost "/var/www/phpBB3"
[Code].....
General :: Php Not Enabled In Apache2?
Jun 14, 2011I am running fedora 14 linux with mysql, php and apache. Just get done with installing each app, But the php doesn't seem to be enabled in apache, since test file doesn't work:
<?php
phpinfo();
?>
General :: How To Run Php3 On Apache2
Sep 24, 2010I have installed the following packages on Linux SUSE:
-Apache 2.2.13
-PHP5.3.3
-freeradius + dialupadmin (web interface for freeradius)
since the htdocs and whole dialupadmin are in .php3.i cannot open the web interface, firefox keep asking me if i want to save the file, or chose a specific program tu run.
Programming :: Apache2 Log Output?
May 10, 2010With the command "tail -300 /var/log/apache2/access.log | less" i can look in the log for the 300 latest visitors. and i wanted to ask if it's possiblle to get that command to run from a php file and if yes how ?
View 4 Replies View RelatedFedora Installation :: F12 - How To Set IP Aliases For Apache2
Jan 25, 2010I need a How to: on setting up IP Aliases for Apache2 IP-Based Virtual Hosts
View 2 Replies View RelatedOpenSUSE :: Apache2 Broken In Upgrade From 10.3 To 11.1?
Aug 23, 2009A recent upgrade from 10.3 to 11.1 went remarkably well --however, Apache (integrated with osCommerce), was broken:
tall:~ # uname -a
Linux tall 2.6.27.29-0.1-default #1 SMP 2009-08-15 17:53:59 +0200 x86_64 x86_64 x86_64 GNU/Linux
[code]....
OpenSUSE Install :: Unable To Use Apache2 On 11.2?
May 18, 2010Installing Apache2 With PHP5 And MySQL Support On OpenSUSE 11.2 (LAMP) | HowtoForge - Linux Howtos and Tutorials Unfortunately when I wanted to start Apache2, i get an error message:
Code:
linux:~ # /etc/init.d/apache2 start
Starting httpd2 (worker) httpd2-worker: Syntax error on line 116 of /etc/apache2/httpd.conf:
Syntax error on line 26 of /etc/apache2/sysconfig.d/loadmodule.conf:
Cannot load /usr/lib/apache2-worker/mod_ssl.so into server: /usr/lib/apache2-worker/mod_ssl.so:
undefined symbol: SSL_get_servername
The command line was:
/usr/sbin/httpd2-worker -f /etc/apache2/httpd.conf
I don't change neither servername nor IP, I left the settings by default.