My current version is
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=8.10
DISTRIB_CODENAME=intrepid
DISTRIB_DESCRIPTION="Ubuntu 8.10"
Whenever I try to pla a video in full screen mode, it crashes. How can I fix this?
I have windows installed through virtual Box now but i have some questions. When i make it full screen it goes full screen but Windows stays in the middle of the screen small and doesn't adjust to the full screen. Can you make windows completely take up the full screen Can i access folders on my ubuntu drive ? i have a file in downloads i want in windows but don't want to reinstall it
View 4 Replies View RelatedThis obnoxious bar has just appeared in Smplayer at the top of the screen. It stays there even when I go full screen. Now full screen isn't full screen and there are black edges on both sides of the screen. I have not be able to figure out how to hide it. I do not need or want this onscreen display. How can I configure Smplayer to make this go away? How can I get my 16:9 full screen aspect ratio back? I have done nothing to mplayer or smplayer as far as editing any or changing any configuration files. I tried several videos and it displays on all of them. It was not there last time I used Smplayer.
View 9 Replies View Relatedwhy my ubuntu 9.04 doesn't start in a full screen , it starts with low resolution , i have to press the button with two screens (i don't know what it's called ) on the keyboard so it comes back to normal .
laptop : dell latitude e5500
os : ubuntu jaunty 9.04
I've had this happen so often in the past, that I'm ready to ditch firefox altogether. I'm running F10 on a 3Ghz Intel dual core processor with a 500gb hdd. l prefer that my browser start up with a full screen when I launch it and firefox has been doing this just fine for the past 8 months. When I fired up firefox (version 3.0.13) this morning, it started up using only half the screen. As I've mentioned this has happened to me in the past and I've never been able to figure out how to get FF back to starting with a full screen. Does anyone know how to make it default back to opening in full screen mode? I've attached an image of how FF is opening now.
View 7 Replies View RelatedI have 11.2 installed on my laptop but have a bit of an issue. When I boot it normally, it will not use my full screen, instead it only uses about a 5"x5" box in the center and displays there, but when i boot into failsafe, it uses the full screen.
View 9 Replies View RelatedNoticed few discussions on ubuntuforums on the problem "ctrl alt enter key combination" not working in toggling full screen rdesktop connection on Window session. Dealing with the same problem. Tried noticed solutions and just not succeeded.
View 1 Replies View Relatedi'm trying to watch video on you tube. flash won't work for me anymore in full screen, so i'm trying the instructions from this web page: debian user forums - view topic - howto watch videos with only free software in debian'howto watch videos with only free software in debian'.install mozilla-mplayer, mplayer , the firefox extension greasemonkey and the script videos without flash auto for greasemonkey : videos without flash auto for greasemonkey when i try to watch you tube i get xine that trys to play the video, but it doesn't work. can i change this to use another player, or is that not going to help?
View 2 Replies View RelatedIn Ubuntu 9.04 and 9.10, KTorrent worked just fine for me. However, this time whenever I launch it, it is for some reason full screen and I have no idea how to get out of full screen.it's of the entire screen when KTorrent is in focus (so no panels or other things were cut out of the image).URL...
View 4 Replies View RelatedI downloaded and did a fresh install of 64bit 10.10 RC a couple of days ago.I've run the Update Manager and everything is up to date.The sceen saver doesn't work. After the set idle time, the screen remains at the desktop and never goes blank. I set it at System / Preferences / Screen saverI have Regard the computer as idle after: 4 minutes
I've checked Activate screensaver when computer is idle.I've checked Lock screen when screensaver is active. I have it set to just do a blank screen.I have a 10.04 machine and a 9.somethingorother machine and the screensaver works normally on both of those.
I have inadvertently caused the main menu (Applications,Places and System) icons to change to a single icon, a white triangle. I've tried to put back the default but no luck. How can I restore the original?
On workspaces, I created a second workspace but the Workspace Switcher doesn't want to show the 2nd workspace; the display should show a blank window. Also the split screen option doesn't work. Do I need an applet (Pager) to sort this out?
Yes, I've been trying to get Windows xp and Linux Ubuntu installed on my computer in the boot screen to pick from one but Linux ubuntu works but Windows xp won't even boot.I just sets there With a little line like that just blink for hours and nothing happens I end up just pulling the power plug to restart the system back into Linux because the side by side Install didn't work.There was software, that should allow me to do this but I forgot what it was, software that would allow me to set Linux ubuntu in the boot screen .
View 4 Replies View RelatedWhen I start ubuntu I can't use my mouse and keyboard. It works in a second when the log in screen appears but then it freeze. It works in bios, grub and safe mode. I use mx518 and ace kl 400.
View 9 Replies View RelatedI just installed Maverick on my HP tx1000. Jockey offered me two drivers for my NVidia Go 6150. I tried the recommended one--and it seemed to be working. It had a green light next to it in Jockey, Compiz worked, etc. Then I rebooted.
Except it didn't reboot--the disk thrashed for a while, and then I was met with a black screen. I tried recovery mode and got a bash prompt...which crashed when I ran `startx'. Then I tried Failsafe X, which did work. After some experimentation, I realized it was the Nvidia driver at fault, so I tried the not-recommended one, which didn't work, and now I've disabled both of them. But isn't there a proper driver for me to use? IIRC, I was using a restricted one with Lucid, and it was working all right.
Fun fact: The day before I installed Maverick, Windows 7 randomly decided to not boot all the way. It would show the splash screen, and then hang with a black screen too. But it works in Safe Mode. And had been working fine for a while beforehand. There must be demons in my graphics card.
I'm having a pretty serious problem, whenever I try to boot into Ubuntu the screen goes black, I see a flash of purple or violet and then i get a prompt asking for my login credentials, afterwards I'm stuck with a terminal trying to start the gui... I don't know what I'm doing wrong, fresh install tried to reboot after getting the display driversinstalled idk if that could be a problem. I tried to commands in the terminal already:
startx
sudo service gdm start
return = start: Job is already running: gdm
afeter installing ubuntu studio 10.10 a black login screen after login it asking me to type a command i've typed '' startx '' but it does't work
View 2 Replies View Relatedi wanted to ask you for help in setting up a cronjob, that restarts a game server.By now I made a script that kills the screen of the server and then restarts it.
View 2 Replies View RelatedI've been playing around with xdmx for quite a while now. Everything works fine, but my keyboard goes "crazy". I've tried all the command line options to set model etc. For example the cursor keys capture a screenshot. The letters work, but capslock/shift doesn't, etc..Today I tried to create a dummy screen in xorg.conf and then vnc into it. Then the mouse didn't show or work in the vnc client.
Is there any way to fool the nvidia driver to think that there is a second display connected? I think that would work better. The dummy driver doesn't have xrandr etc.I'm trying to get this to work on my desktop and laptop. They both have totally different hardware.I'm running Ubuntu 10.04 and xdmx and vnc have been pulled from the default repos.
i had an nvidia geforce 6800 card in my pc and that just all of a sudden stopped working (the screen went blank) so i went to my onboard video and it works but no matter what video card i install, it doesn't work (still a black screen) and i know the cards work on other pc's but just not this one. i've tried different ati cards and nvidia cards with no luck. i've also wanted to disable my onboard card all together but my bios doesn't have that option for some reason. i also thought that it might be the slot but when i install the video card in the pc, the fan works so it's not that.
View 4 Replies View RelatedI have a few issues with my new install of Ubuntu. My screen resolution doesn't go above 800 x 600 and my sound card does not work. I believe these are driver issues.
[Code]....
I'm trying to fix this problem: [URL] I have a problem with fglrx driver since Catalyst 9.9. After installation and reboot I get only black screen when X tries to start and keyboard doesn't work however when I press power button then the system shuts down properly after a while. I have noticed this for the first time on Hardy after installing Catalyst 9.9 and since then I have the same problem on Karmic and Catalyst 9.10/9.11 as well. I don't understand the bold text, What is this X he's talking about?
View 7 Replies View RelatedGot myself in a bit of a squeeze here. I was messing around with the Xorg install on my Fedora 12 system. I ended up reinstalling it. Now my mouse and keyboard work fine in single user mode / terminal. But if I try and boot to X they dont work at the login screen. HAL and udev are booting. Ive done a udevadm monitor test in single user mode and its seeing the devices connect and disconnect. Ive also tried both USB and PS2 devices. Same issue. Ive tried playing with xorg.conf and generating it with Xorg -configure :1 I dont know to use to fix it. After banging my head against the wall for 20+ hours I decided it was time to ask for help. m just Lynxing around the web at the moment =X
View 2 Replies View RelatedI was upgrade my PC's RAM to 4GiB on 32bit platform, the problem is when I set AGP appture size to 64 MiB suse was detect physical memory at 3.4 GiB but when I set AGP appture size to 32 MiB or lower physical memory was detected at 3.6 GiB but I can only boot with failsafe mode, desktop mode doesn't work and screen goes to blank and I want to use the whole 3.6 GiB.
View 2 Replies View RelatedMy screen is frequently freezing and even the keyboard or mouse doesn't work. I've been told to read the logs, But I don't know where thy are or what to look for?
View 3 Replies View RelatedI downloaded the Fedora 11 KDE livecd, installed it, and after the reboot when I get to that "firstboot" screen, I can't move the mouse, the keyboard doesn't work, I have to hold down the power button to turn off the computer.
View 11 Replies View Relatedis there anyway to automatically disable screen saver whenever I watch video in full screen?
View 1 Replies View RelatedI recently upgraded my graphics card from a Geforce 7600GS to a Gefore 560Ti. And while most things are normal, during boot up my screen isn't "full screen" until X is started, after which everything else is fine. Essentially, all display, the grub menu, the splash screen, console text, etc, is within a box on the screen, with 2" on the left and right, and 1" top and bottom of empty blackness.
From what I understand, this is because the framebuffer is using the wrong resolution, but the maximum resolution that hwinfo --framebuffer returns is 1280x1024 (which I am already using "0x031a".) (My monitors is natively 1920x1080) Is it possible to do something about this? If not increase resolution than at least stretch the screen to full screen?
sudo /usr/sbin/hwinfo --framebuffer
02: None 00.0: 11001 VESA Framebuffer
[Created at bios.459]
Unique ID: rdCR.GGyCBArXznD
Hardware Class: framebuffer
Model: "NVIDIA GF104B Board - 10400050"
[Code]...
OpenSuse 11.3 with nVidia drivers.I have the screen working fine though it only runs in 1600x1200@75 using the nVidia driver (GTX260 card).When I play a game in full screen mode all seems OK but when I exit the game then I just get the mouse pointer on a black screen.There must be something present since the cursor changes as I move it, normal pointer -> hand over a link etc. It's just that black on black isn't very readable.
View 5 Replies View Relatedi got to this system called" awesome" and I can't get out The "login screen settings "doesn't work
View 1 Replies View RelatedWhat is the deal with Ubuntu and power states? "Suspend" and "Hibernate" don't do anything. Whether I invoke one manually, the most that happens is that my screen goes blank. The monitor does not go to standby, my hard drives don't spin down, and the machine doesn't go into standby. Whenever I try to start the "Power Management" applet (System->Preferences->Power Management), it seems to hang. Takes a long time - up to a couple of minutes - for a window to appear. I also just noticed that one of my HDD's seems to be running constantly, even though I'm not moving any files around. Not sure where to start straightening things out.
View 9 Replies View Related