I use the script h264enc (installed from the repos) to encode my dvds into avi and mp4. It was working flawlessly under 9.10, now I get the error that MEncoder doesn't support AAC encoding? I have installed all the restricted drivers and I can play dvds, mp4's, .
View 8 RepliesI am trying to change the IP address of the traffic that has been stored. I have tried different commands:
[code]...
however, either from these two commands end up with a following error:
[code]...
when I searched for a solution and generic commands I used those two websites: website1 website2 Commands have been tested using a casual user account as well as a privileged one (root).
I recently upgraded to Maverick and am loving it. Converting over my various scripts to work on the new box I notice that my video trascoding script, which uses mencoder to re-encode video as h264, now does not work.
Code:
mencoder $inpfile -oac mp3lame -lameopts vbr=3:q=3 -ovc x264 -x264encopts crf=22:threads=auto:subq=4:bframes=2:b_pyramid:weight_b:turbo=1 -ofps 25 -o $outfile
For a long time this has worked just fine but the command basically bombs out every time with
Code:
FATAL: Cannot initialize video driver.
I tried using the medibuntu mplayer/mencoder but still no dice.
Does anyone know how I can get this important functionality back?
I want to try encoding some videos with Dirac. I was told on another site that I have to build mencoder with Schroedinger support if I want to do this with OGMRip. I have installed the libschroedinger package installed. How do I buld it with mencoder?
I am using Ubuntu 10.04.
I want to encode video content with mencoder and libvpx codec. I have libvpx installed on my machine and I can encode with libvpx using ffmpeg. My OS is Ubuntu 10.10, 64bit. I downloaded fresh mplayer/mencoder from SVN repository. If I configure mplayer/mencoder without any explicit enabled features using:
[Code]...
I've multiple jpegs uploaded form IP cam via FTP, I use mencoder to periodically pack them into single avi file, problem is that sometimes one or two jpegs submitted by cam are broken, and this make mencoder exit, without producing movie
View 1 Replies View RelatedI have a few ogg files that I want to put on my phone. My phone doesn't play oggs, so I need to convert. It's just an audiobook so I really don't care about quality. Oddly, nothing I try seems to be up to the task. Here's what I tried so far:
sox my.ogg my.mp3: "sox FAIL formats: can't open output file `x.mp3': SoX was compiled without MP3 encoding support" mencoder: wants video too?? Wha?? vlc (from GUI): "p, li { white-space: pre-wrapStreaming / Transcoding failed: It seems your FFMPEG (libavcodec) installation lacks the following encoder: MPEG Audio layer 1/2/3. If you don't know how to fix this, ask for support from your distribution.
This is not an error inside VLC media player. Do not contact the VideoLAN project about this issue." lame my.ogg my.mp3: "sorry, vorbis support in LAME is deprecated." audicity (via GUI): success..but I'm now going to have to somehow script it. This is very annoying. It makes me want to rip directly into mp3 from now on. Is there an easy way to convert an ogg file to an mp3 from the command-line?
compile mplayer & mencoder with VP8 support? also what with VP8 support in rpmfusion?
View 3 Replies View RelatedI was just wondering if it is possible to output an encoding file to http, mms, udp etc... (eg. http://127.0.0.1).I found a way to input these streams and encode them I just cant find a command to output to these.
View 1 Replies View RelatedI am unable to rip from CD to .mp3 using pretty much any tool. Dolphin / Konqueror auidiocd:// KIO slave shows the mp3 folder, but when you move the tracks you get: Could not read some_song.mp3: encoding failed WARNING: libsndfile may ignore -r and perform fseek's on the input. Compile without libsndfile if this is a problem. I'm running 11.3 (KDE 4.4.4) with K3B 2 from Packman (with the k3b 2 codec package) and K3B fails as does the KIO slave method above. Lame version is: lame-3.98.4-2.pm.4.1.x86_64 Restricted multimedia formats packages are installed from Restricted formats/11.3 - openSUSE Community Wiki Alsa works great otherwise, I have no sound issue, etc. - just can't rip anything to mp3 Seems like I'm not the only one who has had this problem, there are a few posts here on the Suse Forum, and others elsewhere, but the resolution seems to be nebulous at best. Sometimes lame 3.98 from packman works for some guys, other times not, etc. Unable to rip an audio cd into mp3's using 11.2 - opensuse.opensuse.org - ArchiveOrange
View 9 Replies View RelatedI'm trying to use mencoder and get these errors:
Code:
/>mencoder
mencoder: /usr/local/lib/libavformat.so.52: no version information available (required by mencoder)
mencoder: /usr/local/lib/libavutil.so.49: no version information available (required by mencoder)
[code]....
Any SCP client (on Windows/Cygwin) support UTF-8 encoding of filenames?
WinSCP does not support UTF-8 encoding with SCP protocol but with SFTP.
I have a problem with mediatomb. I installed it from official ubuntu repo and when someone is trying to get some audio files via UPnP there are visible only namefiles istead of title from tags. It strange because MediaTomb provides album covers from tags, but no album, genre or title. How do I configure that ? MediaTomb from repo has taglib support but no id3lib.
View 2 Replies View RelatedI am a newby in linux. i wanted to install lampp (xampp) but it gaves me an error that the operating system doesn't support 32 bit. I am using at this moment Fedora 12 x86_64.
I looked in another thread and they sad that i need to run yum whatprovides missing_lib_name but it don't show anything is there another way to get 32 bit support in linux because i really need xampp.
I have Debian Testing. My theme is Equinox Light and it was working well except for "Passwords and Encrypton keys" app (Version3.02). That doesn't bothered me. But after todays upgrade from gnome-terminal (2.3.2-1) to gnome-terminal3 Equinox theme doesn't work. My themes are installed in /usr/share/themes folder. It doesn't matter if i copy them to my home theme folder. It seems that gnome3 apps doesn't support
Reverting to previous version fixes the problem but i want to have version 3 with nice theme. Ho w can i achieve it?
I'm trying to convert a video in .ogm format to .avi format so I can stream it to my PS3 via uShare. I'm using Mencoder and the following command to do it (to transcode the audio from vorbis to mp3 and the video from mpeg4 to xvid):
Code: mencoder input.ogm -oac mp3lame -ovc xvid -xvidencopts pass=1 -o output.avi.The only problem is, the video contains 2 audio streams - one Japanese and one English. Needless to say, I need the English one. The above command only seems to transcode the Japanese audio though!Here's what ffmpeg has to say about the input file:
Code:
Input #0, ogg, from 'input.ogm':
Duration: 00:24:16.12, start: 0.000000, bitrate: 1280 kb/s[code]...
what I can do to specify the correct audio stream to encode? Also, how can I keep the bitrate the same as the output.avi seems to default to 96kbps?I'm not sure which audio stream is which but a little trial and error will sort that out in no time.
I'm trying to transcode and merge sub with mencoder in order to watch a video on my nokia cellphone.
I'm using this command :
Code:
without success. The transcoding works, but no subtitle is merged.
The transcoding log is here
I'm using Karmic.
So I typically use cat to put my avi files together.. but today I figure lets see about ripping over so I can watch on my Droid.
As nobody has a xvid or vlc player on the droid (yet.. coders are doing alot for Android ya know) I will have to convert the video down and change the format.. So.. can anybody tell me a mencoder command line directive to get as close to this as possible (I found ipod settings leave the actual video lacking).
Video
Format MP4
Encoder H.264
Resolution 854 x 480 (or 720 x 480; 480 x 320; 320 x 240)
Frame Rate 12 fps - 30 fps
[Code]....
how to remove audio from an .ogv video (GTKRcordmydesktop) while converting to .avi using mencoder?
I've started with this command:
Code:
mencoder -ovc lavc -ofps 15 -oac mp3lame -af volnorm=1:1 out-2.ogv -o sound_editing.avi
Using Miksoft's Mobile Media Converter, and I cannot convert files to MPEG4.[URL]Converting to MPEG1/2 works fine, but trying to convert video for my son's PSP always produces an error. Here's the output:
Code:
>> Command executed:
"/opt/MIKSOFT/MobileMediaConverter/lib/mencoder" -oac lavc -ovc lavc -of lavf -lavcopts
[code]....
I am working in a script I have, to capture video with sound from my capture board, wich is a clone of the pico2000. This script was working in Ubuntu 9.10 untill I reformated my machine and instaled the Ubuntu 10.10, 64 bits. The machine is an AMD Athlon II, 2.6GHz with 3 GBytes of Ram. The former script was:
Code:
#!/bin/bash
clear
SERVICE="mencoder"
MOVIE=$(date +"%H%M")
[Code].....
I'm doing a little python app for encoding .avi from dvds. I know there are a few really good applications out there that do the same thing but I wanted something simple with less faff. The application has 3 settings: Fast, Medium, and Slow. These are for the varying quality rips. For file format I was thinking either lavc or Xvid.
So my first question is, which is better? I really don't know anything about it and I haven't found a decent site that compares them. And secondly what are the best settings for a DVD rip for a Fast Rip, a 'Best of Both' Rip, and a Best Quality Rip? If I've missed any factors in this, please let me know, I'm new to the DVD ripping game. I have no intentions of distributing the movies, they are for my own uses.
I'm trying to convert my screencast to an .avi file, but when I open it... the commentary track is waaay out of sync. No matter which codec I use, it will not stop dropping frames!
View 4 Replies View RelatedI wonder if there is a way to convert 3gp format to avi using mencoder or something similar?
View 7 Replies View RelatedI've just been trying to convert a video to DV format, but mencoder doesn't know about libdv.
Using the command code...
How can I get mencoder to find the codec? Is there a specific place it looks for them?
I have a video that is currently in .mkv format, and I need it in .avi, however, when I attempt to convert it with MEncoder, it cannot find the video. (Please note this is my first attempt to convert anything with MEncoder, or convert any video on Linux). What I entered and my results are as follows -
mencoder Pocketful_Of_Rainbows.mkv -o Pocketful_Of_Rainbows.avi -ovc xvid -oac mp3lame
MEncoder SVN-r29237-4.4.1 (C) 2000-2009 MPlayer Team
File not found: 'Pocketful_Of_Rainbows.mkv'
[code].....
Is the motion compensation deinterlacer missing in Ubuntu's Version of Mencoder?
mencoder -vf help doesn't show it (I guess this means it's not installed...), although mencoder's man pages do have an mcdeint entry.
I have those versions installed:
Code:
I first tried the Versions shipped with Ubuntu Lucid Lynx, then I installed them from the Medibuntu repositories. Both without any success. Does anyone know, how to enable mcdeint support? Is there a repository or something I could add to my sources?
I have been doing some very basic editing in Pitivi and how to get it to encode to X.264. I'm encoding to 480p and I was wondering how do I change the setting to make make it encode to X.264 and look good at small or ok file sizes. I will be uploading these to ..... and want them to look sexy.
And if X.264 can't encode to X.264 then at lest how do I turn the quality up in the formats that it does support.
i just want to know what is best to convert in linux ubuntu 10.04LTS to convert videos!?
View 9 Replies View RelatedI'm copying an animated TV series from DVD to my computer. The DVDs are encoded at 29.970fps, which I find strange because animation usually uses 23.976fps. Anyway, what I have done is de-interlaced and re-encoded it to H.264. Now it is set to 59.970fps, which I think is higher than what I want. I'm seeking advice on whether I should leave it at that or change it to one of the lower frame rates. Another question: Do you think that I should be encoding to H.263 instead? This is just to have copies of the videos on my hard drive.
Note: I used Avidemux with the Yadif filter using the bob method to de-interlace the film. I think the bob method preserves the actual 60 fields and converts them into complete frames. I'm guessing that the temporal spatial check would halve the frames and give me the 29.970fps.