I'm about to order an Intuos4 Medium, but I just want to know how well it works in Ubuntu Studio 10.10? I know profiling works (with a script that I found on the forums) but what about tilt sensitivity and other more advanced options? Also, if people have had it under normal Ubuntu, or Kubuntu,
View 1 RepliesI have a Dell Studio 1535 and can't seem to get recording from the mic jack to work. I was wondering if anyone has got it to work or not on Ubuntu 8.10 64 bit. I fiddled with the settings in System->Preferences->Sound and in Volume Control: HDA Intel (Alsa mixer), as well as the settings in the semi-CLI program alsamixer, but it doesn't matter what I do. I have failed to get it to record from the mic jack. It will only record from my internal mics, and I don't want that at all.
View 2 Replies View RelatedFrom what I understand, it is possible to do via editing xorg.config. As my screen is currently rotated to portrait I want the graphics tablet to rotate accordingly. I am novice with coding, so please keep it simple.
View 1 Replies View RelatedWill ubuntu studio work with wubi if i download the iso?
View 1 Replies View RelatedI'm currently using Ubuntu Studio Lucid and would like to use Ubuntu Studio Maverick, but I'm unsure how to go about the upgrade. Should I upgrade to generic ubuntu maverick then upgrade to ubuntu studio? Or install ubuntu studio maverick from a DVD?? Or something else?? I should say that I have a separate /home partition.
[Edited because what I first wrote was confusing:] when I started the process of upgrading with Update Manager it said that quite a lot of things would be removed (it would be upgrading only to generic Ubuntu for one thing)---I aborted that by the way. I was wondering if anybody knew of a way to avoid having to first sort of note everything that I have installed, then do the upgrade to generic Ubuntu, then do an upgrade to Ubuntu Studio, then reinstall all of the apps in their newer versions. Might there be a way to upgrade the OS itself first and then just directly update the apps without having to reinstall them, figuring out what to install all over again too?
my network was a dream to set up under ubuntu 9.10. all i had to do was enter pass key, then that was it. Works brilliantly.
Different matter with studio. The thing I notice in network connections is, it doesn't want to retain my pass phrase, if I go back into properties the phrase is blank. As far as I can tell the wireless card has been reconcognized and is communicating with router.
My system is: asus p5ql-vm epu, intel core2 duo 2.8 e7400, 4gb 1067 ddr2 ram, belkin f5d7050 v4000, edimax router.
Here is the info requested in the sticky:
kevin@ubuntu:~$ lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 003: ID 045e:00dd Microsoft Corp.
Bus 008 Device 002: ID 046d:c501 Logitech, Inc. Cordless Mouse Receiver
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
code....
I'm a total NOOB and I just finished a dual boot Ubunutu Studio 9.10 64bit/Windows 7 x64 install on a brand new i7 PC using a WD10EARS hard drive (with the new Advanced Format) and I gave myself top marks for getting by the mammoth amount of obstacles to accomplish what I have so far.
Item of note: you can NOT do a complete install with Ubuntu Studio 9.10 using a wireless device. The installer ONLY recognizes motherboard ethernet ports. No worries, I moved it to the office and the LAN line and got a complete install. I am using this in my living room though as a Media PC with MythTV and the distance requires me to use WIRELESS.
After a successful install, I was unable to get my brand new, out of box Netgear WG111v3 to establish a successful connection and I need your help. Pardon the length of this post, I will try to organize it as best as I can but I have done a LOT of troubleshooting before posting here. Here's what I did so far:
1. Tested Wireless in Win7 on same PC. Works GREAT! Rebooted, went into Ubuntu Studio 9.10 and got no joy.
2. This page says the WG111v3 works out of box with Karmic and I can state with 100% certainty it does NOT.
3. Went to this page (which is THE best how to out there) and followed instructions. I discovered a bug in wpa_passphrase immediately. I use a very complex passphrase using !#$&@ characters in the mix. wpa_passphrase dies with various errors when it sees these characters because it thinks they're command items rather than part of the text in my key. Try it yourself. Create any long text string with those characters and input it to wpa_passphrase. It dies. Works fine with regular letters/numbers. I had to use this page to get the HEX value for my passphrase so I could complete my interfaces file. On a hunch, I changed my passphrase on the router to be a simple 10 letter word all in lower case. wpa_passphrase changed that to HEX fine, updated interfaces file, rebooted router and PC and got nothing. So it's NOT the passphrase.
4. Went to this page, which again states it works out of box but doesn't and tried all the help there. NO JOY.
5. Tried here too. The help there is good when combined with #2 above but still nothing.
6. Went to unsupported versions of Ubuntu to try some old school tricks. Got nothing.
7. Found this site and it has EXACTLY my problem! I always end up with "No working leases in persistent database - sleeping." when it tries to get an IP address from the router. As you can see, that user found no fix either.
8. I turned off ALL security on the router and left it wide open, updated my interfaces file appropriately, rebooted everything and it still couldn't connect?
I'm trying to set up some scripts from one machine that I can use to remotely lock all of my workstations remotely. I have a virtual ubuntu machine ported out to the internet w/ ssh open and I'm using ServerAssistant on my droidX phone to kick off the scripts. I have all of my ssh keys shared between the boxes so I don't have to log on. Everything works beautifully for one machine, a regular Ubuntu 10.10 box with a single video card with 2 monitors. This is the script contents:
Code:
ssh -X brainstem@zappa "export DISPLAY=:0; gnome-screensaver; gnome-screensaver-command -l" But my other desktop, a triple monitor ubuntu studio 10.04 box (2 vid cards) will not kick off with the same syntax as above (obviously different computer name). If I execute the command manually from the remote machine, it doesn't work either. Just to make sure, I ran "gnome-screensaver-command -l" locally on this box just to make sure that part works - it locks the machine locally just fine. I just can't seem to get it to work from another machine. I've tried from 2 different boxes and have the same results. I can do anything else I want over ssh and it all works.
I am having trouble getting my wireless internet working on Ubuntu 9.10 on a Dell Studio 1535 laptop. My wireless card works just fine in an earlier version (8.10) of Ubuntu. In fact, it worked right out of the box on Intrepid. However, in 9.10, I can not get it to work. I have installed Wicd Network Manager in it, and it shows no networks visible, even though if I reboot and go into my 8.10 version (I have a multiboot), opening Wicd will immediately show several wireless networks within range. So I'm thinking that the 9.10 version is missing a driver for my wireless card, which 8.10 has.
View 1 Replies View RelatedStrange thing is that the headphone jacks still work just fine. Used to be that unplugging the headphones would cause the sound to come out of the laptop speakers, but now sound never does. I'm wondering if the software that controls the routing of sound between the speakers and the headphone jacks is messed up?
View 4 Replies View RelatedI am using ubuntu 9.10 (kernel 2.6.31-9-rt) and an M-Audio Delta 1010 PCI sound card, and trying to get MIDI inputs and outputs to work on this sound card.I have Jack installed and working. MIDI signals from virtual keyboard or a MIDI player can be routed to fluidsynth, and fluidsynth's audio can be played back through the outputs of the delta 1010.I can use a MIDI sequencer (e.g. rosegarden or qtractor) to record MIDI from virtual keyboard, with jack handling the routing.
But, no matter how I configure the connections in jack, I can't get any signals from the "MIDI In" port on the sound card.Does anybody have some thoughts on how to fix this? Where is the disconnect between the delta 1010 and qtractor? I am concerned also that the "MIDI In" LED on the front panel of the Delta 1010 never blinks. There must be some basic ALSA configuration that needs to be done to activate and use these MIDI ports, or something. I've been trying to figure it out for days.
I've been running Ubuntu 10.04 on my Dell Studio laptop for a few months now with no audio problems. Last night I was listening to music just fine, then put my laptop to sleep and went to bed. Today, I go to play music, and nothing comes out of the speakers. Both headphone/speaker jacks work, but when I unplug the headphones, nothing happens.
View 2 Replies View RelatedI attempted to install nvidia-current 195.36.24 from Synaptic for an Nvidia GTX 460. It didn't appear to work and I want to fully un-install all Nvidia drivers and do the 'official' (convoluted) Nvidia procedure of logging out of x etc: - [URL] The issue is; I tried to remove via Synaptic, but when I restart the system I get an error stating: - 'Ubuntu is running in low-graphics mode. The following error was encountered. You may need to update you configuration to solve this. (EE) Failed to load module "NVidia" (module does not exist, 0) (EE) No drivers available.
This is actually the error that kept appearing and made me want to remove everything. My question is: - Can I just go ahead and install the 'official' Nvidia driver, even though the 'startup' appears to be getting some kind of reference from somewhere? I understand that I'll have to remove the Nouveau driver as well some how. . .
SOUND from analog Capture is out of sync in Pinnacle Studio 14.
[code]...
This problem can occur during capture from an analog capture card if CPU utilization exceeds 95 percent. To avoid this problem, configure virtual memory to be "System managed" by following these steps:
1. Choose Start -> Control Panel.
2. Open the System control panel.
3. Click the Advanced tab.
4. Click the Advanced tab.
5. In the Virtual memory box, click Change.
6. Select System managed size, and click Set.
7. Click OK.
Stupid browser froze up when I tried to submit this before... *sigh* Anyway, is there a simple midi editor that that isn't Rosegarden and doesn't require JACK? Something would simply let me load a Soundfont, and then edit and export a multi-track midi file without a bunch of other stuff you have to do?
View 2 Replies View RelatedI am using OpenSuse 11.2 on a Dell Studio laptop. I have sound through the internal speakers, but no sound through the headphones.I am using KDE and Kmix does have a volume control for the headphone, and it is not muted. None of the sounds are muted.I have run the alsa update as described in another thread and that did not help.
View 9 Replies View RelatedI just installed Linux Multimedia Studio but I can not get any proper sound from my speakers. The only sound I hear is a weird noise. What is the minimum performance to run this application. I have a Compaq Presario pentium 3 with 512mb ram.
View 2 Replies View RelatedI am trying to install dynebolic multimedia studio on my hard disk. As per the instructions i copied the /dyne directory into the /(root) of my partition filesystem and booted from dyne cd but it is not working.they said cd will be automatically ejected during first phase of booting but it didnt It continued to read from cd.What should i do next.
View 1 Replies View RelatedI am trying to record in Audacity in Ubuntu 8.10 64 bit on a Dell Studio 1535 laptop.The problem is not that its not recording, per se.Rather, the problem is its not recording the way that I want it to.
Its recording from the built-in mic, and I want to use the mic jack instead as a line in from a guitar (well, technically, an acoustic-electric resonator, but its close enough to a guitar to call it a guitar).
I have tried using various devices for recording, and changing settings in both the Volume Control and Sound Preferences, but no matter what I do, Audacity still records from my built-in microphones, instead of from the line-in.
how to make creative web cam working with ubuntu
View 1 Replies View RelatedWhen I installed my 64 bit system of Ubuntu 10.04 the sound worked very well and I were very happy. The problem started however when I installed Skype which uses pulseaudio. As soon as I start skype (or any other application that uses pulse, HoN for example) the applications sound output or input does not work at all. If I have pulseaudio started in some way, applications that I suppose do not use it like spotify or flash player stops to produce sounds. And when I type "pulseaudio" in the terminal it gives me this:
[Code]...
I can't get flash controls to work. If the video auto-plays, it starts just fine, if not, I'm out of luck. I've tried reinstalling flash through the software center. Even if it autoplays, I can't control volume or pause or anything. I'm at the mercy of whatever is already there.
Ubuntu Karmic 9.10 - all updated as of 1/2/2009
Firefox 3.5.6
On a Lenovo Thinkpad R400
Is there a way to allow the multimedia keys to function while the system is locked?
View 2 Replies View RelatedI navigated to usr/local/zend/zendstudio-7_1_2/uninstallzendstudio folder and there are some files, one of them is uninstallzendstudio i double clicked it, and chose RUN .. but it gives me error : you do not have sufficent privileges to perform uninstallation, fix the problem ..
View 3 Replies View RelatedHas anyone tried running ubuntu studio on a mac? (intel mactbook pro 5,3) I assume the installation would be essentially the same as installation for standard ubuntu release on mactel? Is there anything specific relating to audio drivers (video too) etc that I should know?
View 3 Replies View RelatedI installed the beta version of Ubuntu 10.4, and on top of that Ubuntu Studio (for the programs it brings with it); but don't like the splash screen.
How do I disable it? (I tried uninstalling the Ubuntu studio desktop, but it did not remove the splash screen).
*Edit, following Ubuntu studio apps are still installed on my system:
Code:
ubuntustudio-default-settings ubuntustudio-screensaver
ubuntustudio-icon-theme ubuntustudio-sounds
ubuntustudio-look ubuntustudio-theme
ubuntustudio-menu ubuntustudio-wallpapers
i want to upgrade to ubuntu studio from ubuntu i found the link saying how to do that before but i cant find it again
View 3 Replies View RelatedHow can I configure the Ubuntu Studio's desktop exactly like Ubuntu? I installed Ubuntu Studio and theres no way to make an internet connection on standard panel neither any specific audio/graphics production software?
View 2 Replies View RelatedI have a studio 1537. I'm on lucid and since some days I've got two COMPLETE shutdown of my system. Is there a way to check logs to see what's happened?
View 1 Replies View RelatedI am currently running Ubuntu studio 10.10 and I love it, but I added some of the stock ubuntu repositories for software sources. now my upgrade manager is asking me to update to ubuntu 11.4. I am tempted to but I dont know how safe it is.
View 2 Replies View Related