I am using OpenSuse 11.2 on a Dell Studio laptop. I have sound through the internal speakers, but no sound through the headphones.I am using KDE and Kmix does have a volume control for the headphone, and it is not muted. None of the sounds are muted.I have run the alsa update as described in another thread and that did not help.
View 9 RepliesI have a pair of Creative I-TRIGUE 200 speakers which work perfectly under windows7 but not under Linux Lucid Lynx (nor under 9.10). When the jack is inserted in a headphone socket, the internal speakers are muted but the external speakers are not activated I have been searching the forums, and found advice to add the line:
[Code]...
I have tried a lot to get sound from my laptop Dell Studio XPS 16 having i7 CPU.
->uname -a
Linux Pakudidi 2.6.31-rc9-7-default #1 SMP 2009-09-08 18:49:15 +0200 x86_64 x86_64 x86_64 GNU/Linux
->
-> rpm -qa '*alsa*'
alsa-devel-1.0.21-1.1.x86_64
alsa-tools-devel-1.0.21-2.5.x86_64
[Code]....
Here, "enable_msi=1" was not initially included in sound.conf, I added. After adding I find that volume change buttons are working, but sound is not coming. Mixer channels are all set to active mode and vol is MAX to 100. Mixer channels show two tabs -- one showing HDA_Intel and the other showing HDA_ATI_HDMI. Mic Jack mode is Line_in.
I get sound from my speakers but not from my headphones. When headphones are plugged in the speakers are muted. In the mixer, all sliders are at 100%. Headphones were tested and worked on another system. Here is some information about my system.
Code:
root@laptop= /home/tom # lspci (snip)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) (snip)
Code:
root@laptop= /home/tom # uname -a
Linux laptop 2.6.34.7-0.5-desktop #1 SMP PREEMPT 2010-10-25 08:40:12 +0200 x86_64 x86_64 x86_64 GNU/Linux .....
Code:
links to sound configuration
ImageBam - Fast, Free Image Hosting and Photo Sharing
ImageBam - Fast, Free Image Hosting and Photo Sharing
Dell Studio 1745
have a Dell Studio 540 and am currently running Fedora 14 x64 KDE version. All seems to work well except I have no sound. Support.dell.com tells me my sound card needs a RealTek driver as well as ALC888 HD driver.Now I don't use the HD integrated sound (back), so I am assuming it's the Analog sound hardware (that I plug my headphones in on the front of the machine).Not sure if that is clear or not, or maybe will have no relation whatsoever how ever I have no sound. I have installed other distros and sound works, but I would really like to use Fedora.
View 4 Replies View Relatedi am using dell studio 1450..my distro is fedora 13.1 community remix..i have some problem
1- sound is not working,,,
2-wifi not working
3-lan card not working
lspci - sound 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Ethernet and wifi 02:00.0 Ethernet controller: Broadcom Corporation Net Link BCM5784M Gigabit Ethernet PCIe (rev 10)06:00.0 Network controller: Intel Corporation WiFi Link 5100...i have tried rpm fusion update configuration also but it does nt work for me
Strange thing is that the headphone jacks still work just fine. Used to be that unplugging the headphones would cause the sound to come out of the laptop speakers, but now sound never does. I'm wondering if the software that controls the routing of sound between the speakers and the headphone jacks is messed up?
View 4 Replies View RelatedI have a Dell Studio 1535 and can't seem to get recording from the mic jack to work. I was wondering if anyone has got it to work or not on Ubuntu 8.10 64 bit. I fiddled with the settings in System->Preferences->Sound and in Volume Control: HDA Intel (Alsa mixer), as well as the settings in the semi-CLI program alsamixer, but it doesn't matter what I do. I have failed to get it to record from the mic jack. It will only record from my internal mics, and I don't want that at all.
View 2 Replies View RelatedI have not used Linux in some time (I used to use it back when suse 8 was still out and mandrake linux was still around).
Recently I decided to give it another go and downloaded both the LiveCD and the DVD (both 64-bit versions AND 32-bit versions).
I have a Dell Studio 1747 Laptop (with the 17.3 screen). It has an Intel i7 1.6GB processor, 4GB ram and an ATI Radeon 4650.
My problem is that the LiveCD just will not work. It gets to its boot menu, but when I press enter on the boot KDE live CD option, it will either try to boot and then freeze, or it will boot, you will hear that startup music, but the display will go blank. Could it be that it cannot handle my display or the graphics card on the laptop?
Unfortunately I have Windows 7, which doesn't seem to be supported by the windows installer on the DVD, so I can't test if it would work that way.
I must admit that ubuntu has given me the same grief, and so I wonder if maybe the laptop isn't yet supported properly by linux yet?
how I could use a live system or something, to at least try linux for a few things (I would need to retain windows for games and stuff). I'm not into resizing partitions and things, so I would prefer something else that could work.
I've been running Ubuntu 10.04 on my Dell Studio laptop for a few months now with no audio problems. Last night I was listening to music just fine, then put my laptop to sleep and went to bed. Today, I go to play music, and nothing comes out of the speakers. Both headphone/speaker jacks work, but when I unplug the headphones, nothing happens.
View 2 Replies View RelatedI just bought a new Dell Studio 1558 and I can't turn the wifi on when logging to my account, the wireless card is installed correctly but the button (F2) doesn't work to turn the wifi on.
[You can see the keyboard shape here]
On windows there is a program from dell that associate these keys (wifi -F2- and Eject optical drive) to their functions.
I wonder how can I achieve this under OpenSuse.
My Dell Studio 1735 laptop fails to install openSUSE 11.4 install from DVD. The installation tells me it failed to install "kernel.desktop" then grub only has a Floppy entry. When I boot to Recover System /boot has no initrd or kernels.
View 5 Replies View RelatedI was trying to install openSUSE 11.2 on Dell XPS Studio, model PP35L, but loading kernel hangs at 94%, I tried F5 for Safe Settings, No APIC, No Local ACPI, Check Installation Media, but it still hangs at 94%. Installation works fine on older computer. Is it because openSuse kernel doesn't recognize the i5 Core processor yet? If this is caused by a driver, is there a way to display the kernel messages and what would be the kernel boot options to disable loading of that driver?
View 2 Replies View RelatedDell Studio 1735 w/BCM4312 WEP fails to connect even though I'm using the 10 character HEX key. It connects fine when there's no security on my Linksys WRT310N router. Ubuntu, Windows 7, my Samsung TV and TiVo all connect fine with the 10 character HEX key, but with opensuse 11.4 I can't connect.
Code:
lspci -nnk tells me I've got:
0c:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
Subsystem: Dell Wireless 1397 WLAN Mini-Card [1028:000c]
Kernel driver in use: wl
[Code]...
i use dell studio 1558 and latest ubuntu 10.04 but after installation i could not hear sound from my headphone but internal speakers work properly.
View 2 Replies View RelatedI just realize that when I plug in my headphones in my laptop, the sound in the laptop's speakers continues to play and I have no sound on the headphones. This is the output of the 'sudo lshw -C sound' on my system:
*-multimedia UNCLAIMED
description: Audio device
product: nVidia Corporation
vendor: nVidia Corporation
physical id: 0.1
bus info: pci@0000:01:00.1
version: a1
width: 32 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: latency=0
resources: memory:d3000000-d3003fff .....
I can not get sound to exit from my headphone jack, whenever I plug it in, no sounds come out. Notebook model is Acer 3820TG. By the way, I've tried adding the line for HDA Intel with udo gedit /etc/modprobe.d/alsa-base.conf
[code]...
I loaded Ubuntu Remix onto my Eee PC 1015PE. I tried to install Desktop switcher and it messed up. But now I log into it using the Gnome Session which gives me the better desktop.
However.
The sound works fine though my speakers but when I connect headphones.
The sound stops from the speakers but does not work on the headphones.
Ubuntu 10.04 LTS the lucid lynx
Gnome 2.30.2
I upgraded from 10.04 to 10.10 and lost headphone sound. My external speakers are working fine though.
I've tried Pulse Audio and Alsa Mixer to no avail. code...
I have a Dell Vostro 320 running Ubuntu 10.10. I can get sound through the onboard speakers but when I plug headphones into the jack, the onboard speakers mute (correct behaviour), but no sound comes from the headphones (incorrect behaviour). The headphones do work with other sound sources.I have made sure all the alsa drivers are up to date and correct and the system is seeing the sound card OK according to aplay -l:
The alsamixer run from the command line or Gnome shows "Master", "PCM", "Beep" and "Capture" all normal with nothing muted. The alsa-base.conf file has the following as the last line as per various posts that seem to have a fix for this problem:options snd-hda-intel model=dell-vostro position_fix=0 enable=yes.
This is not strictly a Linux question, although I am interested in any Linux cautions as to what to avoid that could impact my Linux on the computer in question. I have Linux (openSUSE-11.1) setup on dual boot with MS-Vista on a Dell Studio 1537 laptop. My wife is "fed up" with Vista, and has asked that I replace Vista with WinXP on this Laptop. I would like to do this over the Christmas holiday break. The laptop's 1 year support warrantee has expired. can someone explain to me the function of the two Dell /dev/sda1 and /dev/sda2 partitions ?
This laptop was purchased with MS Vista installed, with 3 primary partitions (small /dev/sda1 (called "Dell Utility" ),10GB /dev/sda2 (unknown - appears to be some sort of Dell backup/recovery partition ? ), /dev/sda3 (MS Vista which had the remainder of the 250GB drive, although I have subsequently reduced this to 69GB ).
Again, I note /dev/sda3 is the 69GB MS Vista partition (I reduced it to 69GB when I installed Linux (openSUSE-11.1)). I also believe it may be in /dev/sda3 where I should plan on installing winXP. Currently I have openSUSE-11.1 Linux in /dev/sda4 (divided into extended partitions, with /dev/sda5 (swap), /dev/sda6 (root), and /dev/sda7 (/home) for Linux and it works well. I plan to keep openSUSE-11.1 Linux when Vista is replaced by WinXP Can I remove and merge /dev/sda1, /dev/sda2, and /dev/sda3 and replace them with one partition for WinXP ?
Or am I better OFF keeping /sdev/sda1 (Dell Utility) ? and am I better off to keep /dev/sda2 (some sort of Vista ?? recovery) ? and only put winXP on /dev/sda3 ? Aside from the MBR with Grub being destroyed (when I replace Vista with winXP) is there anything else I need to be careful of wrt keeping my openSUSE-11.1 Linux install on this laptop ?
I've also sent a slightly different version of this post as a question to the Dell Support mailing list. p.s. for information, here is some output from Linux commands showing the contents:
[Code]....
I'm dual booting Windows 7 and Ubuntu 9.10 64bit on a new HP laptop.In Ubuntu, I'm not getting any sound from the headphone jack. I've tried a couple of different solutions but haven't had much luck. Sound works through the internal speakers in both Windows and Ubuntu. Sound through the headphone jack works only in Windows.The sound card is a IDT 92HD75B3X5.This is a fresh 9.10 install, save for the changes mentioned below.I've attempted to use the gnome-alsa fix that's mentioned in a few threads, but I don't have a "Headphone" tab to "un-mute".I've attempted to recompile the driver as mentioned in this thread
View 9 Replies View RelatedI have a problem with headphone sound with my Ubuntu 10.04 on laptop Acer Aspire TimelineX 4820 TG. When I insert the headphones, the sound from speakers stop, but there is no sound in the headphones. Manipulating with the alsamixer did not help. Modifying /etc/modprobe.d/alsa-base.conf also did not help.
View 1 Replies View RelatedI am on Ubuntu 10.10 and attempting to use my C-Media USB Headphone Set for use with Skype. It used to work at some point; now it just isn't doing anything at all. Ubuntu still recognises the hardware but no sound is coming out at all.
View 6 Replies View RelatedI am using Dell Vostro 1520 with Debian Lenny installed. My problem is that I am getting sound through both my headphone and laptop speakers. But it works fine in Windows XP.
View 12 Replies View Relatedon my new laptop Acer TravelMate TimelineX 8172T, I have some sound problems. I do have sound from the laptop speakers, but plugging in the headphones doesn't mute the main speakers, and also does not give any sound on the headphones. I am running Kubuntu 10.10 64 bit here, and any hint how to solve this would be very welcome indeed.Alsa is version 1.0.23, but alsamixer doesn't show any devices. It only says "Device: HDA Intel" and "Chip: Conexant CX20585", but the elements list is empty and no volume sliders are shown.
View 3 Replies View RelatedI have a laptop DELL Latitude D600. The sounds works great and I can control it with the laptop buttons (increase/decrease/mute volume).
I just upgraded to Ubuntu 10.04. In prior versions, I could control independently the volume for the speakers and for the headphones. And I was able to "join" them together so that when I increase the volume, it increases in both.
Now in 10.04 I can't find where to join them. But that's fine. The problem I have now is that the volume for the headphones seems to be a 10x multiplier of the "master" volume. For example, in order to hear "normal" on the headphones, the master volume has to be almost on mute. If I increase to 1/4 of the way out, the sound is too loud for a human being.
I went to alsamixer to see what's going on and started with everything at 0.
So I put my mouse on top of the volume control on the taskbar and with one "click" on the wheel (to increase volume) I get this code...
That's just one 'click' of the wheel... and the volume control shows almost nothing on the volume bar (the tooltip says Output: 5% -75.70 dB.
In the past the 5% gain in the output was proportional for the headphones. But now it's multiplied by a lot. This makes the volume control useless when using headphones. I have to go to alsamixer to adjust manually.
And to top it off, the new Ubuntu doesn't have the "old" volume control where you can see the level of each output element.
I have a GA-X58-UD3R with an onboard ALC889 codec. When I plug in the headphones I still hear sound from speaker.
Code:
OpenSUSE:/etc/modprobe.d # cat /etc/modprobe.d/50-sound.conf
alias snd-card-0 snd-hda-intel
# u1Nb.GDpQEAJ8ayE:GA-EP45-DS5 Motherboard
alias sound-slot-0 snd-hda-intel
options snd-hda-intel model=auto
I am trying to record in Audacity in Ubuntu 8.10 64 bit on a Dell Studio 1535 laptop.The problem is not that its not recording, per se.Rather, the problem is its not recording the way that I want it to.
Its recording from the built-in mic, and I want to use the mic jack instead as a line in from a guitar (well, technically, an acoustic-electric resonator, but its close enough to a guitar to call it a guitar).
I have tried using various devices for recording, and changing settings in both the Volume Control and Sound Preferences, but no matter what I do, Audacity still records from my built-in microphones, instead of from the line-in.
when I plug headphones into my computer, sound comes out through both the headphones and the computer's speakers. Is there a way to disable the speakers when headphone are plugged in, or even disable them altogether?
View 1 Replies View Related