Ubuntu Multimedia :: Install Nvidia Driver Removal Studio 10.04 Lucid 64 Bit
Oct 10, 2010
I attempted to install nvidia-current 195.36.24 from Synaptic for an Nvidia GTX 460. It didn't appear to work and I want to fully un-install all Nvidia drivers and do the 'official' (convoluted) Nvidia procedure of logging out of x etc: - [URL] The issue is; I tried to remove via Synaptic, but when I restart the system I get an error stating: - 'Ubuntu is running in low-graphics mode. The following error was encountered. You may need to update you configuration to solve this. (EE) Failed to load module "NVidia" (module does not exist, 0) (EE) No drivers available.
This is actually the error that kept appearing and made me want to remove everything. My question is: - Can I just go ahead and install the 'official' Nvidia driver, even though the 'startup' appears to be getting some kind of reference from somewhere? I understand that I'll have to remove the Nouveau driver as well some how. . .
View 1 Replies
ADVERTISEMENT
Jan 9, 2011
I'm currently using Ubuntu Studio Lucid and would like to use Ubuntu Studio Maverick, but I'm unsure how to go about the upgrade. Should I upgrade to generic ubuntu maverick then upgrade to ubuntu studio? Or install ubuntu studio maverick from a DVD?? Or something else?? I should say that I have a separate /home partition.
[Edited because what I first wrote was confusing:] when I started the process of upgrading with Update Manager it said that quite a lot of things would be removed (it would be upgrading only to generic Ubuntu for one thing)---I aborted that by the way. I was wondering if anybody knew of a way to avoid having to first sort of note everything that I have installed, then do the upgrade to generic Ubuntu, then do an upgrade to Ubuntu Studio, then reinstall all of the apps in their newer versions. Might there be a way to upgrade the OS itself first and then just directly update the apps without having to reinstall them, figuring out what to install all over again too?
View 3 Replies
View Related
May 7, 2011
I'm having issues installing the nvidia-96 driver package on the new Lubuntu 11.04. I have a GeForce4ti 4200 card and have had that driver package install successfuly on numerous flavors of Ubuntu over the years.
apt-get spits out the following error:
Code: The following packages have unmet dependencies: nvidia-96 : Depends: xorg-video-abi-8.0 but it is not installable Depends: xserver-xorg-core (>= 2:1.8.99.905-1ubuntu3) but it is not going to be installed
Meanwhile, a check of the currently installed xserver-xorg-core through apt-cache shows:
[Code]...
The nouveau driver does work, but I would really like full 3d acceleration like I have had in the past.
View 2 Replies
View Related
May 9, 2010
I have an Asus ul30vt with the Intel 4500MHD/Nvidia G210M hybrid graphics. I finally found a way to get the Nvidia card to work. I followed these instructions [URL] and now my nvidia card is working. Now though I can't play a single video through the movie player that comes with Lucid 64bit or VLC. I have tried various movies in different formats and different resolutions, both hd and sd. Every video just shows a black screen with sound in the background.
EDIT: I set the output on vlc to X11 and now my videos play but 720p is p little choppy sometimes and 1080p is completely unplayable. Using the Intel card 720p was perfect and 1080p wasn't nearly as choppy but still not really watchable. So something must be messed up because this card should play a lot better than the Intel.
View 7 Replies
View Related
May 26, 2010
I am using the most recent ubuntu kernel (2.6.32-22-generic) for general stuff, and a real time kernel (2.6.31-10-rt) for music recording. Everything was working fine under Karmic.
When I upgraded to 10.04, I had problems with my Nvidia video card, so I uninstalled everying related to Nvidia. And reinstalled the driver using the installer script from the Nvidia website.
I can install the driver for one kernel, but when I boot on the other, it says my X config does not work, and I am back to a low-res no-effect display.
If I then try to reinstall the driver under that kernel, then the first one stops working with the Nvidia driver.
View 1 Replies
View Related
Nov 8, 2015
Problem summary:
Error - "Oh no! Something has gone wrong." and "A problem has occurred and the system can't recover. Please log out and try again."
How to get back to original nouveau driver after failed nvidia driver install?
What probably happened was a wrong nVidia driver install from the repository.. Because never had any problems earlier, but after I installed some nVidia packages, I get this error.
I already tried to remove nvidia driver by
# aptitude purge nvidia-kernel-dkms nvidia-glx
It was successful.
Then I reinstalled Xorg Nouveau driver and all its denpendencies by
# aptitude install xserver-xorg-video-nouveau
It was also successful.
But problem still occurs..
View 14 Replies
View Related
Apr 28, 2010
I've been using an NVIDIA driver from NVIDIA's site (190.53) for a while. Now I want to upgrade to Lucid.
1) Is it recommended to uninstall this driver prior to upgrading to Lucid?
2) If yes, how do I go about this? Please be specific, since I don't want to presume anything and make a mistake.
View 9 Replies
View Related
May 1, 2010
Plenty of people seem to be having issues with the nvidia graphics drivers, so I thought I'd add my woes to the heap. My issue is that I run two screens under twinview, but the second one doesn't work for some reason. More specifically, the Nvidia-settings tool is able to detect my second monitor, and I'm able to assign it a resolution and position and the like, and my desktop seems to extend over to where the second monitor is, but the monitor just remains in standby mode.
This happened with the drivers proprietary drivers that Nvidia tried to install (version 173 I believe) so I removed them and tried to install the 195 drivers manually, which I eventually figured out how to do (by blacklisting the nouveau module amongst other things). This still didn't fix things, and gave me the same issue.
(As an aside, where can I find the nvidia-glx-195 and nvidia-modaliases-195 packages, as they seem to have disappeared from the LP-PPA-nvidia-vdpau repository where they apparently used to be?)
The strange part though, is that my second screen works fine if I don't install any nvidia drivers, and just use the System->Preferences->Monitors applet. The second screen comes out of standby and works nicely.
One other little thing I've noticed that may have something to do with it, is that if I switch the outputs that the monitors are connected to, the other monitor will work. The output whose monitor doesn't work is always the one that has the DVI->VGA converter. Could this have something to do with it?
View 3 Replies
View Related
May 21, 2010
I dont know if this issue has already been solved, or if there are other threads dealing with it, but Im quite desperate with this bug that has been annoying me since I upgraded from 9.10 to 10.04.
Firs I thought it would be GEM related, but Im using a proprietary graphics card, so thats not the way to solve it. I experience the problems a memory leak provokes, mainly that, as time goes by with the laptop turned on, the system needs more resources to execute simple actions, and it freezes too many times. Plus IBUS will, suddenly, stop working (I still don't know if it is related or not), and, most of the times I log in, Notification Area 2.30.0 will load with errors.
View 3 Replies
View Related
Oct 13, 2010
tried to install drivers for FX 5500 today, the one that Ubuntu recommended (173) and the current version (260). Both installs failed when it tried to set up python-support. Returned an exit status of "10". I don't know what that means. I could really use some help, because I just installed UT2K4, and without the driver, I can't play it. I'm running the latest release, as noted in the thread title. Dunno if it helps, but it was a clean install, because an alternate iso upgrade failed and mucked up 10.04.
View 3 Replies
View Related
May 5, 2010
I've been running Lucid since it dropped. Decided to upgrade my NVIDIA 6600gt graphics card to the newest driver I found at the website. Installation went flawless. But after reboot, I got this:
Ubuntu is running in low-graphics mode
The following error was encountered. You may need to update your configuration to solve this.
(EE) May 05 12:24:17 NVIDIA(0): Failed to initialize the NVIDIA
kernel module. Please see the
(EE) May 05 12:24:17 NVIDiA(0): system's kernel log for
[Code]....
View 9 Replies
View Related
May 7, 2010
I want to use my video card, but after upgrade i got this message:
You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server.
will be apreciaTED, after running from terminal I got this
CODE:
rey@rey-desktop:~$ sudo nvidia-xconfig
[sudo] password for rey:
Using X configuration file: "/etc/X11/xorg.conf".
Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.backup'
New X configuration file written to '/etc/X11/xorg.conf'
View 1 Replies
View Related
Jun 30, 2010
Had mythbuntu/xbmc running for 4 months with vdpau and all the same hardware. I killed it with an update and thought it'd all be easier To build it the 2nd time -- wrong! Fresh install of mythbuntu lucid off cd, Asus p5g43t-m pro, nvidia gforce 9500 gt
What I tried so far...Different drivers with the hardware app thingee. Multiple times -- Purge nvidia, purge nouveau, blacklist list of other video stuff with extra line after, stop gnome, manual install various drivers - 195.xxxxx or Synaptic install various drivers. Tried updates, adding avenard and daily build repos. Everything in combinations. Outcome remains consistant. Lo res error start, can't load nvidia driver, selected but not in use, xorg.conf needs editing.
I'm getting the same error messages as the common nvidia help posts describe but the solutions aren't working for me.
4 days of this, 3 installs plus a shot at Mint, and no progress. I'm pretty frustrated. I'd consider returning to karmic if I didn't think the updates would pork the nvidia driver all over again.
Last install of 9.10 there was a required edit of vmalloc=256M and a shut off of cx18. That's been fixed in lucid? What else ccould it be?
View 3 Replies
View Related
Jun 4, 2011
i just installed nvidia driver 96 manually and after reboot pc wont boot, nothing no output , no beep even if removing ram but fans still work and lights too, did a cmos reset but still got the same result,
View 1 Replies
View Related
Dec 14, 2010
i just upgraded to the latest nvidia 8 series driver, i downloaded from the nvidia site. After i installed the driver, i reboot and it booted into the console login screen with no GUI. how do i get back into the GUI.
View 1 Replies
View Related
Apr 22, 2010
i installed the new beta 10.04 and it seemed right after the install and update that both nvidia hardware drivers were automatically install together. i deactivated both drivers. one driver showed the nvidia 173 driver and the other one showed "current" nvidia driver.
after a restart i then tried to activate the 173 driver. system required a restart. so i did. system booted to a black screen. i believe its at the desktop but i am unable to see it. i tried to hit esc at the boot screen to enter the grub menu but that didnt work.
View 3 Replies
View Related
Nov 30, 2010
Only about 1.5 weeks into Linux guys so bear with me. I'm trying to uninstall the Nouveau driver and install NVIDIA-Linux-x86-71.86.14-pkg1.run for my old Nvidia TNT2 card. Following these directions I run into a problem in the first step. When I execute the Ctrl+Alt+F1 command and get:
Ubuntu 10.10 splat-desktop tty1 splat-desktop login: if I enter splat which I believe is my username and the correct p/w I get an incorrect login response.
View 3 Replies
View Related
Jul 7, 2011
Currently using Nvidia driver version 195.36.31, it's the version that works with Nvidia-kernel-dkms, would updating Nvidia driver to the current 275.09.07 driver version break my setup?
View 3 Replies
View Related
Aug 8, 2010
Can do nothing with the PC. New install of 10.04 and was prompted to install Nvidia driver. Did so. Rebooted, now have nothing except a thin line at top of screen. How can I remove this driver when I see nothing?
View 2 Replies
View Related
Apr 28, 2010
I'm doing an install for a friend, the machine is a Gateway with AMD Turion64. The install required the 64 bit version of Lucid 10.04 RC. When I try to install the NVIDIA hardware driver, upon reboot, it flickers, fails, and tells me to use low-setting graphics mode.
lspci | grep VGA
00:05.0 VGA compatible controller: nVidia Corporation C51 [GeForce Go 6100] (rev a2)
I have tried all 3 options in the Hardware Drivers menu with no success.
View 1 Replies
View Related
Jul 9, 2010
OK, I'm using Ubuntu 10.04 and since upgrading to the 256.35 drivers from the ubuntu-x-swat/x-updates ppa the ambiance and radiance themes have gone funny. For example the scroll bars and buttons are now very white and when hovering over the time it goes a very bright colour. If I return to the 195 drivers the problem goes, but the 256 drivers have better video vdpau performance. The problem occurs regardless of whether compiz is enabled. The login screen is also affected. My gfx card is an 8600m gs.
View 9 Replies
View Related
Mar 5, 2011
install debian 6 on my pc and have big problem with videoadapter driver i cannot install driver i dowload driver from nvidia do something in google but nothing! palit gtx 460 linux debian 6 x64.
View 3 Replies
View Related
Jun 6, 2010
I have a Zotac IONITX-F-E motherboard (Intel Atom Dual Core 1.6 GHz + Nvidia ION) -based box with Ubuntu 10.04 64-bit installed. Do you or does someone you know have the same setup as I do? If so, do they have 1080p video playback working? If so, what driver are they using? I've tried following every guide I could find, but no luck so far. I have libvdpau1 and libvdpau-dev installed. I have the nvidia 195.36.24 driver installed (I used the nvidia installer). I have mplayer installed (which I compiled from source with --enable-vdpau).
I try to run mplayer with this command:
Code:
mplayer -vo vdpau -vc ffh264vdpau path/to/myfile.mkv
I get the following message in my terminal:
Code:
Error opening/initializing the selected video_out (-vo) device.
I have libvdpau-dev and libvdpau1 installed.
After Googling this problem, I found a post that suggested the following steps:
Code:
sudo add-apt-repository ppa:nvidia-vdpau
sudo apt-get update
sudo apt-get install nvidia-glx-195 nvidia-195-modaliases
It turns out that I had already added the nvidia-vdpau repository. However, despite that, I get:
Code:
E: Couldn't find package nvidia-glx-195
The same problem exists for the nvidia-195-modaliases package. Do these packages exist? Is there some other way to get them?
View 9 Replies
View Related
Oct 15, 2010
I am running my PC on Lucid. It has been working fine, but suddenly the other day I got an error message when booting, saying that Nvidia kernel module failed to load. I had to boot in low graphics mode. The only thing i can think of that had changed is that I had recently upgraded to latest Linux kernel 2.6.36-25.I have tried carefully following tips on numerous threads on this forum and others, but still no go. I have purged nvidia drivers and reinstalled nvidia-current (also tried nvidia-glx-185). However, when I then do <sudo modprobe nvidia>, I get this message:
WARNING: All config files need .conf: /etc/modprobe.d/lrm-vide, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/bad_list, it will be ignored in a future release.
[code]....
When I go to System>Administration>Hardware Divers, it shows Nvidia-current as present but not currently activated.I have blacklisted vga16fb and nouveau in blacklist.conf, done <sudo nvidia-xconfig> etc.I am at a loss as what to do next, and am still new enough to Linux to not be in a position to fiddle to try fix it myself.
View 1 Replies
View Related
Jan 12, 2011
Thought I'd put this together based on what I just did as it's hard to find a place where you get complete info in one place for this topic.
Not taking any credit as it's just piecing together stuff found on the net.
Of course this is for my specific hardware and system so YMMV:
- Palit Sonic GT 240 card
- Lucid 10.04.1 64-bit
- Intel DG33FB board and E7200 CPU
- LG monitor L194WT at 1440x900 res
Reason for choosing the latest NVidia drivers instead of the ones available from the System > Administration > Hardware Drivers option is that the latest ones contain specific fixes for my card, that are not available in the others.
Prerequisites:
All of the following is based on a freshly installed 64-bit Lucid 10.04.1 system. Some actions may need modification if you have already been tinkering with Nvidia drivers.
1. Backup your /etc/X11/xorg.conf file if any. The default clean install of 64-bit Lucid 10.04.1 doesn't create this file so unless you have generated and modified the xorg.conf file for your specific needs, skip this.
2. Install the following packages
Code:
If this doesn't work, run
Code:
And paste the output of that in the command above so you get, say
Code:
3. Remove the following packages using Synaptic's 'Completely Remove' option
- nvidia-173-modaliases
- nvidia-96-modaliases
- nvidia-current-modaliases
- nvidia-common
4. Create a new text file disable-nouveau.conf in the directory /etc/modprobe.d/ with the following contents
Code:
5. Download the latest NVidia drivers applicable to your card from here:[url]
6. Save the downloaded file (e.g. NVIDIA-Linux-x86_64-260.19.29.run in my case) to an easily accessible location like your home folder. Make this file executable by running, say
Code:
7. Check that the driver was correctly downloaded.
Code:
8. Run Update Manager, Check for updates and Apply any found
Installation:
1. Restart and choose the recovery option from the Grub options list.
2. Choose the Root Shell option in the list of options presented subsequently.
3. At the root shell run the following
Code:
If you skip this, the driver installer will inform you of the need to do this.
4. This will present you with a login prompt. Login with your admin username and password.
5. Navigate to the folder where the driver installer is present and run it, like
Code:
6. Accept the license text.
7. Say Yes to installing the 32-bit Open GL drivers.
8. I think you need to say Yes/ Accept once more time to initiate the driver installation.
9. Once the driver is installed it will ask you whether it should configure xorg.conf for you, say Yes. This will create the xorg.conf file if not present in your system and modify an existing one if present.
10. Back at the prompt, shutdown the system
Code:
11. Restart and use the normal startup option in the Grub options list, if all goes well you should see your beautiful desktop.
View 1 Replies
View Related
Aug 4, 2010
I am trying to update my Nvidia MX 480 GFX card. Today I figured out how to run the program as a root:
Code:
I run that and then this is what it gives me.
Where I got the link to download the nvidia driver from: [url]
View 9 Replies
View Related
Mar 16, 2010
I am trying to install dynebolic multimedia studio on my hard disk. As per the instructions i copied the /dyne directory into the /(root) of my partition filesystem and booted from dyne cd but it is not working.they said cd will be automatically ejected during first phase of booting but it didnt It continued to read from cd.What should i do next.
View 1 Replies
View Related
May 5, 2010
I'm still searching for a propiertary driver for my netbook (Asus EEE 901 with an Intel GMA950 graphic card). Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
Does someone know how to install a driver with 3D-support? Should I use a driver from[URL].. I had no problems at Karmic, because the driver was found at "Hardware Drivers". Lucid doesn't show me any driver there. Is there any correlation between the big intel-graphic issues and my 'problem'?
View 5 Replies
View Related
May 14, 2010
Cant enable desktop effects Nvidia 9200M GS after update to Lucid Lynx
View 3 Replies
View Related
Mar 20, 2010
I've installed 9.10 and wish to use the nvidia-glx-173 driver as recommended by jockey. Using the jocky GUI just hangs at 100% cpu, a significant portion of which is the cdrom process; I've tried installing the package directly in aptitude and get the error:
Code:
Media Change: Please insert the disc labeled 'Ubuntu 9.10 _Karmic Koala_ - Release i386 (20091028.5)' in the drive '/cdrom/' and press [Enter]. The installation disc (standard x86 disk from shipit) doesn't satisfy it. How do I get aptitude to just download it from online repositories?
View 1 Replies
View Related
