I just installed Linux Multimedia Studio but I can not get any proper sound from my speakers. The only sound I hear is a weird noise. What is the minimum performance to run this application. I have a Compaq Presario pentium 3 with 512mb ram.
View 2 RepliesI have just installed squeeze 6.0.2 amd64 and noticed when I use k3b to burn/verify a disc, when it has finished burning the media it plays a sound, and rather sound is played which sounds very crackly/muffled.I do not remember this on ubuntu, and I cannot say for sure but I dont recall this happening on squeeze 6.0.1.
Sound plays perfectly in all other applications, no problems whatsoever.This is not a big deal, I just dont remember this happening. I know this isnt the most detailed posting but does anyone have any idea what this could be? I even tried to reinstall k3b through synaptics and the problem still persists.
I'm having a very faint but noticeable electric-like buzzing/grinding. It is not the hard drive but sounds very similar.
It occurs when i move scroll bars, or drag windows. It is highly replicable.
The only other time this has happens is when i install KDE which resulted in me reinstalling. Something id prefer to avoid. I haven't installed KDE this time, but this seems to have started immediately after replacing my fstab file which i accidentally deleted. That's the only thing i can think of.
This happened to me first time when i installed VLC Player,and now it happens in QT Designer too I dont know if its relevant,but when i installed Ubuntu,i installed it in Serbian language (cyrilic) and than switched to English.
View 4 Replies View RelatedSince about a few weeks, I have a problem with the sound on my Ubuntu Jaunty 64-bit. From any application it would simply provide noise instead of the real sound. The motherboard is working fine and providing sound under Vista. Initially, I then managed to change the settings in System-> Sound from Auto to one of the options, which provided for a decent test result. Now this is not working anymore either ... so I only get noise out of my speakers.
View 1 Replies View RelatedI'm running the latest version of Ubuntu and have been for a while now without issue. However today (actually now yesterday) i made the giant mistake of upgrading my on board HD3150 graphics to a PCIe HD5570 since then my whole life has fallen to bits.
First i noticed some visual noise on the screen. Concluding this was due to incorrect or out of date drivers i attempted to update them from the Hardware Drivers section. This gave the error:
SystemError: installArchives() failed
Activating from the command line using jockey gave the same error.
Deciding a reboot might be needed i did so. On power up all ubuntu and recovery modes produced an unskinned GUI with no desktop icons that responded to no mouse or keyboard input.
I was forced to reinstall the operating system.
On reinstalling and losing everything i had installed previously (it's going to take many days to get that all back and working again!), i still have the screen noise, have still been getting the same errors on attempting to activate the drivers, except now i also get this:
the installation of this driver failed.
Please have a look at the log file for details.: /var/log/jockey.log
Code:
2010-09-22 01:40:58,589 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xa332aec> about HardwareID('modalias', 'usb:v045Ep00E1d0007dc00dsc00dp00ic03isc01ip02')
2010-09-22 01:40:58,589 DEBUG: querying driver db <jockey.detection.LocalKernelModulesDriverDB instance at 0xa332aec> about HardwareID('modalias', 'usb:v046Dp0804d0009dcEFdsc02dp01ic0Eisc01ip00')
[Code]....
Is there a way to filter static or noise out of an mp3? I have avidemux and audacity but I'm not sure how to go about it, or if its actually possible.
View 5 Replies View RelatedI'm running Ubuntu 10.10 in a Samsung R510. I've tried to record sound with an external microphone and there have always been a permanent noise accompanying it.I thought it could be the internal microphone, that's causing the noise, but even when I disabled it the noise remains. Or maybe I didn't disable it the right way !
View 9 Replies View RelatedI'm getting this weird noise and (sometimes) delayed audio on HDMI out on VLC. I've tried banshee, miro, ..... on FF and all of them work just right. I would settle changing VLC's sound output to ALSA, but it's also buggy as I get no audio after pausing. Restarting or reloading Pulseaudio and ALSA didn't work either.
Does anybody have a recommendation? Obviously, I'd like to stick with VLC.
I'm currently using Ubuntu Studio Lucid and would like to use Ubuntu Studio Maverick, but I'm unsure how to go about the upgrade. Should I upgrade to generic ubuntu maverick then upgrade to ubuntu studio? Or install ubuntu studio maverick from a DVD?? Or something else?? I should say that I have a separate /home partition.
[Edited because what I first wrote was confusing:] when I started the process of upgrading with Update Manager it said that quite a lot of things would be removed (it would be upgrading only to generic Ubuntu for one thing)---I aborted that by the way. I was wondering if anybody knew of a way to avoid having to first sort of note everything that I have installed, then do the upgrade to generic Ubuntu, then do an upgrade to Ubuntu Studio, then reinstall all of the apps in their newer versions. Might there be a way to upgrade the OS itself first and then just directly update the apps without having to reinstall them, figuring out what to install all over again too?
When I turn my sound up all the way I hear a white noise or "staticy" sound which I do not know how to get rid of. My sound when playing music is not the best sound quality either. Please help me out somebody please. Here is my sound card info:
[code]...
My microphone was working properly until four days ago. I'm not sure if this appeared after a system update, I'm using LL 10.04. This is my onboard HDA Intel chip,from 'lspci':
00:1b.0 Audio device: Intel Corporation 82801JD/DO (ICH10 Family) HD Audio Controller (rev 02)
I can record sounds from the microphone, but white noise is accompanied. The weird thing is that when I unplug the microphone, I can still hear the white noise. I've tried modifying the settings in gnome-volume-control and in alsamixer without luck. The white noise is persistent. I've read this can be related to pulse audio but no one seems to know how to reset it to its default configuration.
I have a doubt about the Gnome default Image Viewer.It's because I edit my RAW images on RawTherapee, and then export them to jpg.When I open the exported pictures on the image viewer, it looks like has lots of noise.But when I open the same picture on Gimp or Iceweasel, the noises doen't appear.
So, the question is: which image viewer is wrong? Is Gimp and Iceweasel "fixing" the picture automatically, or Gnome Image Viewer is reading it wrongly and showing it with noise?URL...
Here's what I updated yesterday The following NEW packages will be installed:libboost-program-options1.46.1{a} python-chardet{a} python-debian{a}
[Code]...
Whenever I play a flash object that has sound, there is this repetitive beeping noise audible over the audio track. I've tried this on different videos and different sites, always with the same result. Whenever I play a multimedia file in Iceweasel, for example [URL]... plodes.ogv , the sound is normal, as is the sound for any multimedia file that I play in MPlayer. So, I am convinced it is a flash issue. What I don't get is why this just started happening for no apparent reason.
After installing Catalyst with VA-API began a strange problem with the sound via HDMI. Prior to installing the sound worked fine. Platform: MSI E350IA-E45 with Radeon HD 6310 and AMD Zacate E350 Version of Catalyst 11.4. After installing the sound is playing with a terrible noise Sample: [URL]... I already tried all the audio outputs, but this does not solve the problem. The problem occurs only when the transmission of sound through HDMI.
View 1 Replies View Relatedexplain to me how to get sound through the internal speaker of my computer. Everything else works fine. IE, if I plug in a headset or boxes, they work fine.
View 4 Replies View RelatedI do not find any settings to switch the stereo output in Ubuntu, just now my speakers is placed so right speaker stands to the left and I can not move them just now. How do I do, I use Ubuntu 11.04.
View 1 Replies View Relatedrecently i installed ubuntu (gnome) 10.10. i'm lovin it but only thing is bugging me is this annoying noise whenever i try to see a video on web or using vlc. i m using dell inspiron 6400. IT has VGA compatible controller: ATI Technologies Inc Radeon Mobility X1400 My glxinfo outcome is :
HTML Code:
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
[code]...
now my main problem is whenever i change my visual settings from none to extra , i start getting noise on my usb headphone or even on my speakers especially if i play a video on full screen mode it become worse .. it starts constantly makeing buzzing noise. sometimes even when i minimize or maximize or scroll up down a window...
if i put the visual effects in normal mode i still get the noise on video playing full-screen mood but this is time bit low and on none mode i get the noise too but very low... so i m assuming there must be some problem with my vga card which is causing this chaos. unfortunately there is no driver for my graphics card dat ati supports on ubuntu, so i used gallium 3d project using this ppa https://launchpad.net/~xorg-edgers/+archive/radeon .. graphics works fine now but this nosie is killing me ..
This is for all of you who are having problems getting sound out of the PC Speaker, as far as getting the system beep or system bell. In Karmic (9.10), a change was made to get rid of the system beeps and disable the pc speaker. Unfortunately for people who liked (or more likely need) the beeps, the changes occurred in multiple places and are not that easy to find. The pc speaker and beeps were disabled in response to this bug. I believe there were other bugs dealt with here because not everything that was done seems to be covered, if that makes sense.
This bug was created in response, in hope of getting the beeps turned back on. This post by one of the developers has some pretty comprehensive instructions for getting the beep back on. I want to note right now, that I did not have to apply his patch to get the beeps back on where I wanted them. It may already have been included in an update, or was obviated by something else I did. I realize this is pretty fragmented, and you may or may not want or need to go as far as I did with this. When I get a chance to do a new clean install of Karmic (maybe in a vm or something) I intend to go back over these instructions and try to create a synthesis of them that should work for certain. If I can, I'll figure out a way to script it.
One other thing I should point out. I didn't get the bug where I had to reload the pcspkr module on every boot, so that must be fixed. (I did have to remove it from the blacklist so it would be loaded on boot, but I didn't have to kill and reload it or add it to rc.local like some people did in those descriptions). I also did not get the bug of an endless loop of beep sound or multiple beep sounds, but that only happened to people who followed the directions to change the system beep to another sound.
I'm relatively new to Ubuntu, so please forgive me if I seem a little ... After installing Lucid Lynx, I had some sound issues that I've been attacking over the past few days. I've gotten it down to the point where .mp3s and other sound effects play on 2.1, instead of my full 5.1 setup, with the exception of using
Code: speaker-test -Dplug:surround51 -c6 -l1 -twav which will play from every speaker. Relatedly, I have no volume control icon in my toolbar, and when I go to System --> Preferences --> Sound, an error window pops up that says, "Waiting for Sound System to Respond." Currently, I am using the ALSA Mixer GUI to adjust my volume and whatnot. My sound card is a Sound Blaster Audigy SE CA106, and here's the yield from various terminal commands:
Code:
uname -a
Linux DeskingtonJefferson 2.6.32-22-generic #33-Ubuntu SMP Wed Apr 28 13:27:30 UTC 2010 i686 GNU/Linux
Code:
aplay -l
[Code]...
I recently switched from Ubuntu to Lubuntu on my Acer Aspire netbook. When I had Ubuntu, in System Preferences I had a Sound mixer that would allow me to set the volume beyond 100%. It simply said "Sound" and was different than the applet feature. Both were preinstalled. With Lubuntu, I seem to have lost this option. I went through and installed Gnome ALSA Mixer along with Pulse Audio Control, but neither does what this simple volume control feature on Ubuntu did. My speakers are horrible, and the previous "Sound" feature really let me crank it up a bit. I'm not trying to blow my speakers out or anything;
View 4 Replies View RelatedI'm just installed 10.04 on a new Gateway DX4300. The integrated sound card is a Realtek AC1200. Sound works great, however, I'd like the rear input to mute when I plugin my headphones in the front input. Where can I configure this? Here's some basic information:
[Code]...
I'm still on UBUNTUO 9.04 atm - I'm getting myself a Logitech USB headset. I plugged it in, and immediately I see this in dmesg
[ 7015.732141] input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.3/input/input11[ 7015.732234] generic-usb 0003:046D:0A0B.0006: input,hidraw3: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:1a.1-2/input3 [ 7280.088017] usb 1-3: reset high speed USB device using ehci_hcd and address 3
Which is fantastic. Tested this on all kind of audio and I can hear them fine. So headset is working wonders. Except, everytime I want to switch the output from between the speaker and the headset, I have to go System > Preference > Sound > output tab > click on the switch. Which is fine, but the switching procedure via GUI is very arduous. Is there a way to to do this via the command line, if so I can bind it to a hotkey and therefore with one hotkey I will be able to switch between headset vs my speaker?
I bought a $400 Dell Vostro V130, and decided to put 10.10 netbook remix onto it. (Vostro V130 owners: after the reboot into the new system, there is no GUI. worse, after log in, a startx means the screen goes dead. fortunately, a power key event is still detected, so reboot still works cleanly. after I did a full apt-get update, apt-get dist-upgrade, and apt-get upgrade, the screen and remix worked.)
I would now like to increase the bass, systemwide (so that ..... gets sound that is a little better). the speaker icon on the top right gets me into sound preferences, but I do not see an equalizer.
I installed Xubuntu to a flashdrive using unetbootin. Since I only have a 2GB drive I installed Fluxbox instead of XFCE to save space. I install alsa-utils to try to get some audio going. aplay and speaker-test gets nothing at all. Both as sudo and a reg user. I have turn up the volume on everything in alsamixer. I believe the relevant drivers are loaded.
Code:
I would like sound from mono sources to play in both speakers/earphones. How do I do this? Currently, it plays in only one side (which makes for an odd listening experience).I generally use banshee to play sound.
View 2 Replies View RelatedI have a Acer emachine E732z laptop. I have installed debian squeeze gnome, but it is unable to play audio through laptop speaker. The (3.5mm)audio jack is working fine and I can play audio through it. I have also installed Linux mint, but no audio(in speaker and audio jack). There is no such problem in Windows7.
View 1 Replies View RelatedI would like your input please. I'm using an HP DV7 laptop and the sound works under Opensuse 11.2 but without base. I have therefore updated ALSA to version 1.0.22.1 to make use of the introduced base switch for DV7 (ALSA changelog here)
I have tried these ALSA options but without any change / improvement to the base sound.
options snd-hda-intel=hp-dv5 and also hp-dv7 and hp_dv7
options snd-hda-intel enable_msi=1
Any ideas?
The second line stops the sound from "stuttering" but the first seem to have no effect.
Every time I boot into my laptop, there is no sound. Going to alsamixer in a terminal shows that the "Speaker" volume is constantly getting reset to 0, and bringing it back up fixes the problem. How can I get Alsa to remember to keep the speaker volume above 0?
View 3 Replies View RelatedYesterday I installed openSUSE 11.3 on a desktop PC and I noticed that the PC's speaker it's not functioning but if I plug the headphones I can hear the sound system working.
View 8 Replies View Related