I can't seem to pass 1360x768 on my nvidia 9400 gt 512mb ram. The current driver is 260.19.36 and I've installed the recommended current found under additional drivers however I am still limited in resolution. How do I bump it up to my previously used (Windows 7) 1680x1050?
ubuntu 10.10 desktop x64
I'm using Ubuntu 9.10 64-bit with a GTS 250. After installing the restricted driver from NVIDIA's website I get stuck at a 640x320 resolution. The only other option I get is 320x240. The resolution I need is 1680x1050.
I've also encountered this problem with a 9600GT.
I currently have an nvidia 8600 gts w/nvidia restricted drivers and I cannot seem to change the resolution to anything higher than 640x480. Everything used to work perfectly w/the restricted drivers however I downloaded an update and it screwed everything up.
I have tried to edit my xorg.conf file but it seems that either i'm doing something wrong or the nvidia drivers are simply ignoring that file. I tried reverting back to the older versions of the drivers and that didnt seem to work. I tried installing the newest version of the nvidia drivers and that didnt work either. below is my xorg.conf file
[Code]...
I recently installed Ubuntu, 10.4
My problem is that when i log in, the resolution isnt what i want. So i change it via the Nvidia x server settings, and press Save to x config file
Yet when i log in again, it defaults back to what it was before i changed it?
Iv looked all over the internet for the past 2 days and nothing seems to work.
I'm using Nvidia's driver from their website and Kubuntu 8.04. I tried Debian 5.04 kde on the same computer and the resolution stays. Of course I prefer kubuntu. After shutdown the video resolution goes back to 1024x768 but I want 1280x800 instead. I have a Dell IN191ON lcd widescreen monitor and geforce fx 5200 video card. I'm using the latest video driver from Nvidia for this card version NVIDIA-Linux-x86-173.14.25-pkg1.run.
Here is my xorg.conf.
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder75) Wed Jan 27 03:03:53 PST 2010
Section "ServerLayout"
[Code]....
I have just installed ubuntu 10.04 32 bit on my girlfriend's computer. She has a NVIDIA GeForce2 MX/MX 400 video adapter and I am having trouble getting the restricted driver working. First I tried it by the books through the Restricted Drivers assistant under Administration. This was successful but on reboot both the boot screen and the desktop environment were at 640x480. No adjustment using the NVIDIA tools was possible. It said that the monitor was unknown. It is a Fujitsu Siemens D-19.1 monitor. I believe however the problem lies with the graphics adapter because I remember it being identified correctly at some point of the ordeal.
Next I followed a tutorial and removed all of my NVIDIA packages from the computer. I still have my graphical environment though. After downloading the appropriate (Newer version than that in the Ubuntu repo) driver from the NVIDIA website I entered
Quote:
It says that the installation has failed. I can supply log files of the failure.
I currently have the proprietary drivers for nvidia installed for my gtx 460, nvidia drivers are ver 270.41.06. Ever since I reformatted my computer and got the new nvidia drivers, every time I reboot my resolution goes to something horrible(1024x76 on a monitor capable of 1920x1080. While I can simply change it every boot, it gets quite tedious so I have a script to run on boot:
Code:
xrandr -s 1920x1080
To set my monitor to its proper resolution, the issue is I still have to reset gnome panels etc every time after the resolution has changed the config.
My xorg.conf is as follows:
Code:# nvidia-settings: X configuration file generated by nvidia-settings
[Code]...
I have also tried changing the default resolution in the server settings manager and saving the xorg.conf file, but nothing seems to work. Is there any way to change this/has anybody else had the issue? I'm considering going back to an older version of the drivers if that would solve it,
My HP Laptop screen is 18.4 in diameter and the only two resolutions that work are the highest a 1920x1080 which is too small for me or 1360x768 which is perfect. That res is no longer available in the latest Nvidia driver.
View 9 Replies View RelatedI installed Nvidia 195 version from their site and installed as per their instruction. Now, on reboot the resolution gets "800*600" while it should be "1366*768". What should I do?
View 5 Replies View RelatedI have searched all over the internet for a solution to my problem but I have never found one and it is really frustrating me. Basically when I installed Ubuntu 10.04 on my laptop everything works fine other than extra desktop effects because obviously graphics drivers or not installed yet. All of this is fine and the boot up screen is at my native resolution 1366x768 or something very close and it looks really nice.
The main problem I have is that as soon as I install my graphics driver for nVidia G105m card for some strange reason the boot up screen becomes a very strange resolution and appears to become very glitchy and it is really bugging me. Instead of the boot screen having a nice purple background and the loading bar and word Ubuntu looking nice and smooth it because large pixelated and every time I boot a big green square flashes during the boot up screen.
This problem goes away as soon as I remove drivers but then obviously I lose desktop effects and then that is just as annoying. Now my question is, is there anyway way I can either fix my low boot up screen resolution or is there another way in which i can enable desktop effects without installing my drivers?
This is a new 9.10 installation. Screen resolution by default is 800x600. I've installed the 1.85 nvidia driver, which correctly identifies my monitor as a Samsung 931b (or whatever). Nvidia's gui suggests a 1280x1024, which is just what I want. When I try to save the changes to xorg.conf, I get a variety of errors, including (but not limited to) "...error parsing xorg.conf..". I've chmod 'ed the X11 directory, and the xorg.conf* files in it to 777, I end up with 1280x1024 until a reboot, after which I get 800x600 again (arrgg!).
Judging from the number of people posting here and in other places, this is common. Seems there would be a solution that works. Any suggestions?
Here is the current content of my xorg.conf file:
ebaxter@ebaxter-desktop:/etc/X11$ cat xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@palmer) Sun Feb 1 20:21:04 UTC 2009
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Fri Aug 14 17:54:58 PDT 2009
[Code]....
I have a FX 5200 and a 26" TV with VGA input which supports 1330x760. No problem with this in Windows, but in Ubuntu, as soon as I install nvidia drivers (175) resolution goes 640x480.
I've tried editing xorg.conf in several different ways, but resolution didn't change, maybe I was doing it the wrong way.
PD: 10.04 Lucid Lynx fresh install
My monitor's dvi jack is damaged so my nvidia geforce 210 does not recognise the supported resolutions correctly.
result: while it actually can support upto 1440x900, the highest available resolution is 1360x768.
While on windows, i used the nvidia utility to add the custom resolution and everything was nice.
On ubuntu 10.04, i haven't found a way to do that yet. yes, i searched forums, tried a couple of things with the xorg.conf file and lxrandr, etc. but to no avail.
I did manage to get the resolution listed in ubuntu's own display manager, and it shows 1440x900, but it doesn't apply when i hit 'apply'.
The nvidia settings manager does not show the resolution.
After installing some (much needed) upgrades, I am stuck being unable to install nvidia-settings after screen-resolution-extra upgraded from .11 to .13. Nvidia-settings, supposedly, requires .11. I can, of course, downgrade to .11, but I do not know if this is recommended. Is there anyway to get nvidia-settings back without downgrading? What is a good course of action?
View 1 Replies View RelatedMy native resolution is 1366x768.
View 8 Replies View RelatedI installed Ubuntu 10.10 64 bits on a HP Elitebook 8540p with a NVIDIA NVS 5100 graphic card. Initially, the computer did not boot correctly and was stuck with the following error message:
[ 6.484165] [drm] nouveau 0000:01:00.0: Pointer to BIT loadval table invalid. I found the solution on a forum [URL] and correct the problem by editing Grub with nomodeset:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset".
Then update it by: sudo update-grub. Now Ubuntu boots but the screen resolution is 800x600 instead of 1600x900 and I can not change it. Note that I had the 1600x900 resolution before updating the Grub file but it was not stable: went back to the "Pointer to BIT loadval table invalid" when restarted.
I have what I think is a pretty eay question. I'm trying to set the screen resolution of my new 10.10 installation to 1920x1080. The monitor only supports up to 1024x768, but i would like more area. I've done this before but I forgot how i did it. In the end the screen spilled off to the sides and when I ran my cursor over to that section it would disply it. I have a feeling that i need to edit my xorg.conf file, but my nvidia drive has some new mode types and i figured I'd ask before making random changes.
below is my xorg.conf file.
UTC 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
[Code]...
I need to set my resolution to 1280x1024. Problem is, that the NVIDIA X Server Settings does not display such a resolution and I want to use that! My monitor is an LCD capable of upto 1280x1024 75HZ resolution. I'm using Ubuntu 10.10. I did the xrandr command to check what resolutions are available and its output was:
Failed to get size of gamma for output default
Screen 0: minimum 320 x 240, current 1024 x 768, maximum 1024 x 768
default connected 1024x768+0+0 0mm x 0mm
1024x768 50.0 60.0*
800x600 51.0 52.0 53.0
680x384 54.0 55.0
640x480 56.0
512x384 57.0
400x300 58.0
320x240 59.0
In NVIDIA X Server Settings, the list of available resolutions are:
(all of the above)
1152x864
1360x768
I have NVIDIA GeForce 9500GT.
I just bought a new 24inch monitor that supports the resolution 1920x1200. Unfortunately, the nvidia-settings dialog does not have this resolution as an option (currently running on 1920x1080). The graphics card is Geforce 6200 (should support the wanted resolution), and the monitor is connected with the VGA cable (if that matters).
View 7 Replies View RelatedI have installed in squeeze following some directions the nvidia restricted driver from the unstable repos.
everything worked fine, except that the applied resolution is not kept after every restart or login
Since I upgraded to 9.04 a while back I have had this annoying screen resolution issue. Every time I log into my Ubuntu system the screen resolution defaults to 1280x1024. My preferred desktop resolution is normally set at 1680x1050. So each time I log in I have to open the Nvidia control panel and manually set the screen resolution to 1680x1050. Even after logging out it will still go right back to 1280x1024 when I log back in.
But the funny this is I am almost positive the login screen resolution is 1680x1050 because the picture is crisp unlike the blurry and distorted picture at 1028x1024. I have tried everything from manually editing the x.org conf file to running the Nvidia control panel as root. Nothing saves my preferred resolution of 1680x1050. My Nvidia driver is version 190.42 and Ubuntu version is 9.04. The monitor is an ASUS VW192T+ which is detected by the Nvidia driver.
I install on my PC Ubuntu 10.4 and i make al the updates even on my video card I update my video card to the last driver from the NVIDIA official site 195.36.15 My video card is Geforce 8600 GL The big problem is that after the update I have only 2 modes for changing the resolution 320x240 and 680x480 an I relay need biger resolution (1024x786) My xorg.config is :
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Fri Mar 12 01:42:27 PST 2010
Section "ServerLayout"
[code].......
You know, the "ctrl+alt+F5" type things, where you go to those pure command lines? I installed Ubuntu 10.04 from scratch, and everything was working great! Good resolution, etc. When I booted up my computer, the (very brief) splash screen fit the entire resolution of my monitor (1680x1050), and the X server did the same.
When I'd go to one of those 'tty' terminals, I was surprised (in a good way) to see that they had scaled to my monitor's resolution as well. I was looking forward to using that. Well, time came where I wanted to turn on Compiz, so I downloaded/installed the nVidia drivers. Well, they work. I can work with Compiz and 3D games at full speed and full resolution in Ubuntu, and I have zero complaints about that.
What I do have a complaint about is that the terminals (tty5, in the above example) are back to that old resolution, 640x480 I believe. Also, that brief splash screen is at the same horrible resolution, instead of the full resolution I had on the old nVidia driver that didn't support 3D effects.
Is there a way to get that back? Is it a bug or a glitch that it's no longer scaling the tty's to my display resolution, and do I just have to wait for an update?
I have a HP dv6314tx laptop with Nvidia Geforce Go 7400 graphics card. Recently I installed 10.04. Without installing any nvidia drivers my boot screen resolution and desktop resolution were fine. But I cudn't activate Extra Visual effects and so I installed nvidia drivers. Now the problem is that Extra visual effects work just fine. But during the boot, the splash screen has a very poor resolution.
View 2 Replies View RelatedI've just installed 10.04 on my Dell Latitude D830 with a NVIDIA Quadro NVS 140M; upon booting Ubuntu asked me to install the official NVIDIA driver (latest) so I went ahead and installed it, now the boot splash screen is in about 640x480/800x600 rather than the usual 1920x1200 it was when I first booted.
View 4 Replies View RelatedUbuntu 10.04, nVidia GeForce 9400, driver ver 195.36.15.When I log in, the system always comes up in 800x600 mode. I went into the NVIDIA X Server Settings page and changed it to my preferred setting of 1152x864. I hit Apply, then Save to X Configuration File (with correct root password).All is well until restarting. Then it reverts back. The update doesn't stick. How can I make this the permenant setting?
View 3 Replies View RelatedI'm a first timer on Ubuntu and I have a little problem with my Nvidia graphic card. After lots of attempts I can't get the 1280x1024 resolution that both of my monitors have. Instead I'm running on 1024x768.Is this a way to fix it?
View 8 Replies View RelatedI have a Philips 19' HDTV I use as my monitor, I have tried every guide out there, including the wiki one with xandr. Nothing works for me. This seems like it should be way easier, set custom resolution go.. but this isn't the case.
Using Ubuntu 10.04 -
I've tried editing the xorg.conf and adding the modelines and changing the modes , I've tried the xandr commands. I've tried guides from years ago to current ones. I'm desperate, Everything is cut off like maybe an inch not even. Can just barely see the edges of the top and bottom bars.
I've been working on this for many many hours coming up with nothing every time. I wish there was a way to just resize the desktop.
Here is my most recent attempt at the conf file.
Quote:
Recently I encountered a problem with a triple-monitor setup where the EDID was rejected by the nvidia driver (version 195.36.0, claiming that the EDID checksum was invalid. The maximum resolution that the driver would allow was 640x480. Searching through the X logs (/var/log/Xorg.0.log), I found the following message:
Code:
(WW) Jul 26 21:37:57 NVIDIA(GPU-0): The EDID read for display device DFP-0 is invalid: the
(WW) Jul 26 21:37:57 NVIDIA(GPU-0): checksum for EDID version 1 extension is invalid.
[Code].....
I'm trying to get my resolution to match the resolution I use in Windows 7 which is 1768 x 992 (50hz) Nvidia Geforce 210, LG Electronics 37LF75 - At the moment the top and bottom are both missing off the screen. Everytime I try to adjust my xorg.conf file it hangs at boot. Not really sure what exactly I'm doing with it.
xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.06 (buildd@yellow) Mon Oct 4 15:59:51 UTC 2010
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 260.19.06 (buildmeister@builder101) Mon Sep 13 04:59:45 PDT 2010
Section "ServerLayout"
[Code]...