I have installed in squeeze following some directions the nvidia restricted driver from the unstable repos.
everything worked fine, except that the applied resolution is not kept after every restart or login
I have chosen to use automatic login. But every now and then I am asked for username and password when the computer boots. When I do get automatically login the screen resolution is changed to 800 x 600 instead of 1280 x 1024. How do I get those two (resolution and log in) settings sticky?
Graphics: Nvidia GeForce FX 5200 (updated today!)
SuSE Linux 11.2
KDE 4.3.5
I have tried the tips, and to the best of my ability understand the later posts from the sticky post "Graphics Resolution" however I seem to keep reverting back to the blank screen. I did this:
Quote: ATI TIPS: Note that some ATI cards need flgrlx and some do not... If not then this workaround sometimes works: (Found this in another thread / credit to Quote: Originally Posted by surgus View Post
Steps for ATI users:
1. When the boot hangs, press ctrl+alt+f1.
2. Login as user with root privileges.
3. Type "cd /usr/share/ati" and press enter.
4. Type "sudo sh ./fglrx-uninstall.sh" and press enter.
5. Type "sudo reboot".
The above only works for some but not all, depending on what card you have and whether it actually is supported by additional drivers (proprietary). All at the moment, mostl seem to need "nomodeset radeon mode=X", where x= 0 or 1... Some ATI cards are not working with the current natty kernel, but are working with the older 2.6.37 kernel or the proposed 2.6,38.9 kerne (please see post 2)l Sometimes (rarely) it'll work but more often it won't, and in the two times it's worked I haven't known how to get it to remember the setting permanently- keep in mind I have no idea what that last paragraph about x= 0 or 1 means.
Situation is that there are two users on a Linux server- say A and B.A has been operating a shell script that in turn makes use of and exe file.The script and exe both are owned by user A.My problem is that I want user B to make use of the script and exe in exactly the same way user A does.So I have set suid bit of the script, exe and all the library files that the exe uses.But the exe is still not executing from user B.I did a man of chmod on Linux server and it gave an indication that SUID is disabled on new Linux servers.Now the question is, is there any other command that can perform the same task as SUID did on Unix.
View 4 Replies View RelatedI installed Debian 8 Jessie with the GNOME 3 desktop environment and I couldn't get pass the login screen after several reboots. Since I read that NVIDIA graphics are problematic, I decided to reinstall the system but selected Mate desktop, which appears to be less graphic intensive than GNOME 3. It worked. However, I can't get a higher resolution than 1024x768 (In Windows I could). The Mate settings in the "System → Preferences → Monitors" does not show higher resolutions.
The information of the graphics card is this:
Code: Select all00:0d.0 VGA compatible controller [0300]: NVIDIA Corporation C61 [GeForce 6150SE nForce 430] [10de:03d0] (rev a2)
Before I try to install proprietary drivers as instructed in [URL] ...., I'd like to see if there's anything to try first with the default stuff installed by the system, because that page says:
As of jessie, the need for the proprietary drivers is pretty much over - nouveau now works quite well and works with dual-headed displays by simple and easy configuring from within your desktop(for KDE see System_Settings/Hardware/Display_and_Monitor/Display_Configuration) . The proprietary drivers don't provide normal logging and can be a hidden source of problems.
The nouvea drivers work with some xrandr magic, but the closed-source drivers won't. They fail to detect a possible resolution over 640x480. My monitor has a native resolution of 1440x900 @ 60hz. I've tried to modify my xorg.conf, but to no avail. I installed the latest nvidia drivers from the site instead of the repo drivers, version: 260.19.29, this is my xorg.conf, basically a standard xorg file:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 260.19.29 (buildmeister@swio-display-x86-rhel47-04.nvidia.com) Wed Dec 8 12:27:39 PST 2010
Section "ServerLayout"
[code]....
I've finally managed to get the nvidia driver on my Lenny box. However I've now found that I can't change resolution from 640x480, the nvidia panel shows this and 320x240 as the only resolution. The layout shows "hidden as under 600 pixels" If I go to gnome screen resolutions it only shows 640x480. If I plug a second monitor in it won't detect it.
I'm using NVIDIA-Linux-x86-180.51-pkg1.run, older versions appear not to work with Lenny crashing x on boot. How to change resolution on the nvidia in Lenny?
I have install squeeze, wheezy. I understand there a glitch in nvidia-setting. So how can I change screen resolution and refresh rate in xorg.conf?
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (pbuilder@windlord) Sun Jun 13 06:03:17 UTC 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection .....
I have installed the Nvidia drivers on my desktop using [URL] according to the Debian way. Everything seems to be fine except the resolution. The best it will let me choose is something like 600x480. I have searched and most of what is suggested around the web is to change xorg.conf. I have tried this using different setting suggested but nothing is working. I did not have a xorg.conf file so I created one with the setting suggested on the Debian wiki.
View 12 Replies View RelatedHaving been using squeeze on my primary system for some time, I decided to install it on my media center PC. After doing a clean install I lost sound (another post) and my maximum video resolution dropped to 1280x1024. I was previously getting 1920x1080 (native) resolution under lenny on this box. So it's a mystery to me why I'm not getting that now. As you can see, the nvidia module is loaded:
# lsmod | grep nvidia
nvidia 9821382 0
i2c_core 12570 2 i2c_piix4,nvidia
PS--This was installed the "debian way" via module assistant.
Currently my display is set to 1280x960 at 60Hz, but my monitor supports 1920x1080, which is what I would like to have. Preferences -> Monitor Settings (lxrandr) does not change anything & does not show my desired resolution either. I tried using the Nvidia propietary drivers but whenever I try to switch to them from xorg.conf the X display can't start. right now I am using the nouveau driver. I've seen some xrandr commands but so far haven't been able to figure out what I need to do.
I am on Debian 7.6.0 (Wheezy) amd64:
Code: Select all$ uname -rms
Linux 3.2.0-4-amd64 x86_64
I installed my system from the LXDE live media.
My graphics card is the NVIDIA GeForce4 MX 440 (NV18).
lspci output:
$ lspci | grep -i vga
01:00.0 VGA compatible controller: NVIDIA Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev c1)
I'm trying to install the nvidia drivers but it is not working.
lspci | grep VGA
02:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX - nForce GPU] (rev a3)
My xorg.conf looks like this:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
[code]...
And after that my X is not working. And when i try sudo modprobe nvidia I get this:
FATAL: Error inserting nvidia (/lib/modules/2.6.26-2-686/nvidia/nvidia.ko): No such device
I can't seem to pass 1360x768 on my nvidia 9400 gt 512mb ram. The current driver is 260.19.36 and I've installed the recommended current found under additional drivers however I am still limited in resolution. How do I bump it up to my previously used (Windows 7) 1680x1050?
ubuntu 10.10 desktop x64
This is my 2nd day on linux (yesterday I installed u-b-u-n-t-u but I couldn�t get my video drivers to work, so today, I installed Fedora 15 and everything is fine). I cannot change my resolution guys. I have installed the nvidia drivers but still; I cannot go higher than 1024x768. All I want is 1280x1024 or higher. [URL] I installed fedora using the live cd - install to hdd Also, if it helps, I used thsi method to install my drivers [URL] (the 1st one)
View 6 Replies View RelatedI've tried installing Nvidia drivers on opensuse 11.3 (32 bit) for my graphics card which is a GeForce 250 GTS. Regardless of whether I do it 'the hard way' which I'm familiar with, or the Yareg repository way found on this forum I get the same behaviour
Best resolution I can get after installing Nvidia drivers is 640x480, if I rename xorg.conf in an attempt to force auto-detection I get 1024x768. I've tried everything I can find on nvidia drivers for 11.3 like adding nomodeset to the menu.lst grub entry, setting no_kms_in_initrd to yes, definitely installing under runlevel 3 etc
Same thing happens, I can run nvidia-settings ok which I think suggests the driver is installed and initialised, nothing I try will let me use better than 1024x768. Same machine with 11.2 installed handles 1680x1050 perfectly
I'm using Ubuntu 9.10 64-bit with a GTS 250. After installing the restricted driver from NVIDIA's website I get stuck at a 640x320 resolution. The only other option I get is 320x240. The resolution I need is 1680x1050.
I've also encountered this problem with a 9600GT.
I currently have an nvidia 8600 gts w/nvidia restricted drivers and I cannot seem to change the resolution to anything higher than 640x480. Everything used to work perfectly w/the restricted drivers however I downloaded an update and it screwed everything up.
I have tried to edit my xorg.conf file but it seems that either i'm doing something wrong or the nvidia drivers are simply ignoring that file. I tried reverting back to the older versions of the drivers and that didnt seem to work. I tried installing the newest version of the nvidia drivers and that didnt work either. below is my xorg.conf file
[Code]...
I recently installed Ubuntu, 10.4
My problem is that when i log in, the resolution isnt what i want. So i change it via the Nvidia x server settings, and press Save to x config file
Yet when i log in again, it defaults back to what it was before i changed it?
Iv looked all over the internet for the past 2 days and nothing seems to work.
I'm using Nvidia's driver from their website and Kubuntu 8.04. I tried Debian 5.04 kde on the same computer and the resolution stays. Of course I prefer kubuntu. After shutdown the video resolution goes back to 1024x768 but I want 1280x800 instead. I have a Dell IN191ON lcd widescreen monitor and geforce fx 5200 video card. I'm using the latest video driver from Nvidia for this card version NVIDIA-Linux-x86-173.14.25-pkg1.run.
Here is my xorg.conf.
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder75) Wed Jan 27 03:03:53 PST 2010
Section "ServerLayout"
[Code]....
I have just installed ubuntu 10.04 32 bit on my girlfriend's computer. She has a NVIDIA GeForce2 MX/MX 400 video adapter and I am having trouble getting the restricted driver working. First I tried it by the books through the Restricted Drivers assistant under Administration. This was successful but on reboot both the boot screen and the desktop environment were at 640x480. No adjustment using the NVIDIA tools was possible. It said that the monitor was unknown. It is a Fujitsu Siemens D-19.1 monitor. I believe however the problem lies with the graphics adapter because I remember it being identified correctly at some point of the ordeal.
Next I followed a tutorial and removed all of my NVIDIA packages from the computer. I still have my graphical environment though. After downloading the appropriate (Newer version than that in the Ubuntu repo) driver from the NVIDIA website I entered
Quote:
It says that the installation has failed. I can supply log files of the failure.
I currently have the proprietary drivers for nvidia installed for my gtx 460, nvidia drivers are ver 270.41.06. Ever since I reformatted my computer and got the new nvidia drivers, every time I reboot my resolution goes to something horrible(1024x76 on a monitor capable of 1920x1080. While I can simply change it every boot, it gets quite tedious so I have a script to run on boot:
Code:
xrandr -s 1920x1080
To set my monitor to its proper resolution, the issue is I still have to reset gnome panels etc every time after the resolution has changed the config.
My xorg.conf is as follows:
Code:# nvidia-settings: X configuration file generated by nvidia-settings
[Code]...
I have also tried changing the default resolution in the server settings manager and saving the xorg.conf file, but nothing seems to work. Is there any way to change this/has anybody else had the issue? I'm considering going back to an older version of the drivers if that would solve it,
My HP Laptop screen is 18.4 in diameter and the only two resolutions that work are the highest a 1920x1080 which is too small for me or 1360x768 which is perfect. That res is no longer available in the latest Nvidia driver.
View 9 Replies View Relatedi'm having a problem with nvidia-settings is that my resolution is not listed in. the only resolutions available are 640x480 and 320x240, the "detect display" doesn't work either.by the way i'm using the driver from nvidia site.other point is that i couldn't change resolution on kde before i installed the nvidia driver, it just showed the same two resolutions, i thought it was because i hadn't install the nvidia drivers but i got the same problem.
View 4 Replies View Relatedi got nvidia 6150se nforce 430 i install it's drivers from the hardware drivers but the max resolution it gets its 1360x768 which are not enough what should i do to fix it?
View 8 Replies View RelatedTrying to get the updates for my Nvidia card, there are 3 updates in the update manager, but it gives me this error if I try to update them: -
Code:
nvidia-newest-kmod-common >= 177.82 is needed by package akmod-nvidia-newest-177.82-1.fc9.2.x86_64
nvidia-newest-kmod-common >= 177.82 is needed by package kmod-nvidia-newest-2.6.27.19-78.2.30.fc9.x86_64-177.82-1.fc9.8.x86_64
nvidia-newest-kmod-common >= 177.82 is needed by package kmod-nvidia-newest-2.6.27.21-170.2.56.fc10.x86_64-177.82-1.fc10.2.x86_64
nvidia-newest-kmod-common >= 177.82 is needed by package kmod-nvidia-newest-2.6.27.19-170.2.35.fc10.x86_64-177.82-1.fc10.2.x86_64 : Success - empty transaction
When I reboot my machine, the login screen looks fine, but then when it actually goes into Gnome, the resolution is always reset to a 4:3 resolution that looks horrible on my new 24" 16:9 monitor. When I launch the nVidia X Server Settings application, I can change it back to the monitor's native resolution of 1920x1080 without issue. When I click "Save to X Configuration File" I get an error message stating, "Unable to remove old X config backup file '/etc/X11/xorg.conf.backup'."
I'm not sure if this is causing the problem or not. I'm running F12. The graphics card is an nVidia GeForce G100, which connects to a no-name 24" LCD monitor that I just picked up. The monitor has VGA and DVI inputs. I'm running an HDMI cable from the nVidia card, into an HDMI-->DVI adapter, and then into the DVI port on the monitor. I used it for 2 days connecting DVI-only from the nVidia and didn't have this problem.
[Code]...
I installed Nvidia 195 version from their site and installed as per their instruction. Now, on reboot the resolution gets "800*600" while it should be "1366*768". What should I do?
View 5 Replies View RelatedI have searched all over the internet for a solution to my problem but I have never found one and it is really frustrating me. Basically when I installed Ubuntu 10.04 on my laptop everything works fine other than extra desktop effects because obviously graphics drivers or not installed yet. All of this is fine and the boot up screen is at my native resolution 1366x768 or something very close and it looks really nice.
The main problem I have is that as soon as I install my graphics driver for nVidia G105m card for some strange reason the boot up screen becomes a very strange resolution and appears to become very glitchy and it is really bugging me. Instead of the boot screen having a nice purple background and the loading bar and word Ubuntu looking nice and smooth it because large pixelated and every time I boot a big green square flashes during the boot up screen.
This problem goes away as soon as I remove drivers but then obviously I lose desktop effects and then that is just as annoying. Now my question is, is there anyway way I can either fix my low boot up screen resolution or is there another way in which i can enable desktop effects without installing my drivers?
This is a new 9.10 installation. Screen resolution by default is 800x600. I've installed the 1.85 nvidia driver, which correctly identifies my monitor as a Samsung 931b (or whatever). Nvidia's gui suggests a 1280x1024, which is just what I want. When I try to save the changes to xorg.conf, I get a variety of errors, including (but not limited to) "...error parsing xorg.conf..". I've chmod 'ed the X11 directory, and the xorg.conf* files in it to 777, I end up with 1280x1024 until a reboot, after which I get 800x600 again (arrgg!).
Judging from the number of people posting here and in other places, this is common. Seems there would be a solution that works. Any suggestions?
Here is the current content of my xorg.conf file:
ebaxter@ebaxter-desktop:/etc/X11$ cat xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@palmer) Sun Feb 1 20:21:04 UTC 2009
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Fri Aug 14 17:54:58 PDT 2009
[Code]....
I have a FX 5200 and a 26" TV with VGA input which supports 1330x760. No problem with this in Windows, but in Ubuntu, as soon as I install nvidia drivers (175) resolution goes 640x480.
I've tried editing xorg.conf in several different ways, but resolution didn't change, maybe I was doing it the wrong way.
PD: 10.04 Lucid Lynx fresh install