I currently have the proprietary drivers for nvidia installed for my gtx 460, nvidia drivers are ver 270.41.06. Ever since I reformatted my computer and got the new nvidia drivers, every time I reboot my resolution goes to something horrible(1024x76 on a monitor capable of 1920x1080. While I can simply change it every boot, it gets quite tedious so I have a script to run on boot:
Code:
xrandr -s 1920x1080
To set my monitor to its proper resolution, the issue is I still have to reset gnome panels etc every time after the resolution has changed the config.
My xorg.conf is as follows:
Code:# nvidia-settings: X configuration file generated by nvidia-settings
[Code]...
I have also tried changing the default resolution in the server settings manager and saving the xorg.conf file, but nothing seems to work. Is there any way to change this/has anybody else had the issue? I'm considering going back to an older version of the drivers if that would solve it,
I have Ubuntu 10.04 32bit installed on my desktop. My video card is an nVidia 7800 GT. My Monitor is a Sceptre X24WG. I am able to use the NVIDIA X Server Settings utility to change my resolution to 1920x1080 as well as 1920x1200,and 3d opengl accelerated games work. When i reboot, the x server comes up with 1280x1024 as the resolution. I want it to remember the resolution i selected instead of defaulting to a different resolution.
I was running Kubuntu 8.10 previously and had some difficulty setting up the graphics initially, but i don't recall what steps i had taken to get it to work. When i recently reformatted to install Ubuntu 10.04, it wouldn't go directly to 10.04. The screen would go to a garbled display and would load the install window, so i installed 9.04 and then upgraded to 9.10 and then 10.04, without trouble.
I'm using the nVidia hardware driver version 195.36.15, which in the hardware drivers utility is listed as the current and recommended version. It originally wouldn't install until after i had rebooted into the 2.6.31-21 kernel. I have tried the option to save to x configuration file. When i save to x configuration file, the xorg.conf in /etc/X11/ looks like this:
Code: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (buildd@palmer) Fri Apr 9 10:35:18 UTC 2010 # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 1.0 (buildmeister@builder75) Fri Mar 12 01:42:27 PST 2010 # xorg.conf (X.Org X Window System server configuration file)
I just install a GT240 video card on my desktop. The monitor that I've been using is a 50PH9UK plasma TV. The TV is connected to the desktop through VGA output. It appears that Fedora sets the screen size at 1360x860 by default. However, I prefer to set the screen size at 1020x768. The problem is that everytime I reboot the desktop, Fedora automatically resizes the screen to the default resolution (1360x860). I tried to look for the xcon.fig file in /etc/X11/ but it's not there. It appears that the xcon.fig is missing. Do you know how I can correct the automatic screen reset issue? By the way, I'm using the Fedora 14 KDE version.
I've read some people having the same problem, but I can't manage to fix it. I got a 1440x900 screen. Every time I reboot my system starts up with 1400x1050 , I have to go to System settings to fix it, options don't get saved as one would expect.
Well, I think my problem is cause of nvidia drivers, so I go to nvidia settings to get this fixed. But, these settings are all fine, it says 1440x900. When I try pressing Save to X (to make sure it gets saved), i get a failed to parse message (Failed to parse existing X config file '/etc/X11/xorg.conf'!). I've got driver version 256.53
Oh well, screw this, I'll do it manually, so I go to the xorg.conf file. But over here everything says 1440x900. How come my resolution keeps changing each time I reboot?
When I reboot my machine, the login screen looks fine, but then when it actually goes into Gnome, the resolution is always reset to a 4:3 resolution that looks horrible on my new 24" 16:9 monitor. When I launch the nVidia X Server Settings application, I can change it back to the monitor's native resolution of 1920x1080 without issue. When I click "Save to X Configuration File" I get an error message stating, "Unable to remove old X config backup file '/etc/X11/xorg.conf.backup'."
I'm not sure if this is causing the problem or not. I'm running F12. The graphics card is an nVidia GeForce G100, which connects to a no-name 24" LCD monitor that I just picked up. The monitor has VGA and DVI inputs. I'm running an HDMI cable from the nVidia card, into an HDMI-->DVI adapter, and then into the DVI port on the monitor. I used it for 2 days connecting DVI-only from the nVidia and didn't have this problem.
I'm using Nvidia's driver from their website and Kubuntu 8.04. I tried Debian 5.04 kde on the same computer and the resolution stays. Of course I prefer kubuntu. After shutdown the video resolution goes back to 1024x768 but I want 1280x800 instead. I have a Dell IN191ON lcd widescreen monitor and geforce fx 5200 video card. I'm using the latest video driver from Nvidia for this card version NVIDIA-Linux-x86-173.14.25-pkg1.run.
Here is my xorg.conf.
# nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (buildmeister@builder75) Wed Jan 27 03:03:53 PST 2010 Section "ServerLayout"
I installed Nvidia 195 version from their site and installed as per their instruction. Now, on reboot the resolution gets "800*600" while it should be "1366*768". What should I do?
This is a new 9.10 installation. Screen resolution by default is 800x600. I've installed the 1.85 nvidia driver, which correctly identifies my monitor as a Samsung 931b (or whatever). Nvidia's gui suggests a 1280x1024, which is just what I want. When I try to save the changes to xorg.conf, I get a variety of errors, including (but not limited to) "...error parsing xorg.conf..". I've chmod 'ed the X11 directory, and the xorg.conf* files in it to 777, I end up with 1280x1024 until a reboot, after which I get 800x600 again (arrgg!).
Judging from the number of people posting here and in other places, this is common. Seems there would be a solution that works. Any suggestions?
Here is the current content of my xorg.conf file:
ebaxter@ebaxter-desktop:/etc/X11$ cat xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (buildd@palmer) Sun Feb 1 20:21:04 UTC 2009 # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 1.0 (buildmeister@builder63) Fri Aug 14 17:54:58 PDT 2009
I have installed wally on my Dell inspiron 1420 with Ubuntu 10 10 . I have pointed wally to my personal picture folder in an external drive in folder settings. But whenever i reboot folder settings gets reset and i have to set the picture folder path again. Is there a way by which what ever path i set will stay after the reboot of the system.
The volume keyboard shortcuts on my Asus Eee 1008p resets on reboot.(going back to no shortcut at all). It works for the session, if i set it, but after reboot i have to set it again.
if I have to reset my system for any reason or even logging out my pavucontrol resets to my built in audio instead of sticking to my HDMI like I want it to.I can manually configure a file I will, I just need to know where to start.I will provide hardware info when asked for it, just need a feeler here.I am running Debian Jessie KDE 64bit
I'm using Gnome and OpenSUSE 11.2, and my keyboard layout changes USA from Finland every time I reboot my pc. I have to delete USA-layout from keyboard preferences every time after reboot.
I have a Geforce GTX 460 GPU and I recently switched from Ubuntu to Suse 11 and I have installed the latest Nvidia drivers (the same as I had on Ubuntu) In Ubuntu I had configured the xserver to display my desktop on my LCD monitor and my LED TV as clones and everything worked fine When I change the settings in Suse everything works fine until I restart the Xserver. All my settings disappear and everything is back to the standard settings again. It doesn't seem to make any difference whether I have root privileges or not, and I have tried saving to etc/X11/xorg.conf., etc/X11/xorg.conf.install, etc/X11/xorg.conf.backup but each time I reboot everything is back to the default settings again. In Ubuntu I just saved the new settings to etc/X11/xorg.conf. and restarted the Xserver and all was fine.
Here is a copy of what I saved to the X config file:
# nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 270.41.06 (buildmeister@swio-display-x86-rhel47-07.nvidia.com) Mon Apr 18 15:15:00 PDT 2011 Section "ServerLayout"
[code].....
ERROR: Invalid display device DFP-2 specified on line 56 of configuration file '/root/.nvidia-settings-rc'(the currently enabled display devices are DFP-0 on linux-c0rf:0.0). and all the settings are defaulted
I have recently installed ubuntu as my main operating system, everything has been working great except every time I re-boot the resolution resets back to a default. How can I get it to default to 1440x900?
I use a few different hard drives that I plug into one PC instead of partitioning, since it causes problems. I plugged in my Ubuntu 9.10 64 bit and it booted up in 1024x768 instead of 1280x1024 which is the default resolution for this monitor.Why would it change when it's been 1280 x 1024 everytime but this time? When I check the display settings it doesn't even have 1280x1024 anymore?
when I was entering a sed command, with a back-reference to the scnd set of parenthesis. 2 reset X, or so I though ... I did some experimenting, and lo and behold, I could reproduce the behaviour even on the xdm login screen, when I typed in my sed expression as the name. Not every time, not accurately, but maybe 3 out of 10 times I can reset X by pressing 2 on the numeric row in a quick succession with other keys, and the I at first thought was required to trigger the behavior is not necessary at all. Nothing in the X-log, nothing in ~/.xsession-errors.
I'm annoyed, and as X is quite sizable and spawns a truckload of processes I'm highly reluctant to try and reproduce the behaviour under the control of strace (mind you, since it seems to be "speed" related it maybe wouldn't even occur under strace ;}). I'm running Slack64 13.0 on a Thinkpad R500 with an Intel GMA 4500MHD graphics chipset, can't think of anything else that might be special with this hardware in regards to X.
Suddenly Ubuntu goes into low-graphics mode the last couple of days I have had to reboot my Ubuntu-workstation when the screen suddenly goes black. After some seconds I get a pop-up with the message: Ubuntu is running in low-graphics mode. There is some buttons that tells me I can do different things but whatever I do I end up loosing all windows I worked in earlier. And having to reboot to get back full resolution [URL].
Every time Ubuntu (10.04) starts, it uses a screen resolution of 1024x768. I change this successfully through Preferences to 1280x1024, but it is never remembered at the next boot. How do I ensure that it is. (I've read that an etc/X11/xorg.conf file may be used for this, but I don't have one and am unsure what I need to put into one)
My screen resolution keeps reverting back to the default resolution 800x600. I'm using ubuntu 10.04, but had the same problem on 9.10 on my Acer Revo r3600 ION. I am able to change the resolution to 1280x1024 but have to do it by the nVidia configuration tool. The tool then allows me to 'Save to X Configuration'which it appears to have done successfully.See the sections from my 'etcx11xorg.conf' file. This is the state of the file after a reboot by the way.how I can get my desired resolution to persist after I reboot?
I am installing 11.2 on an older machine, Athlon 2800+, GeForce 6800, 1 GB RAM. Install goes fine until try to reboot to the OS and just get massive garbage on the screen. Can't see anything just lines crossing the screen, it seems almost like the resolution is way off but don't know how to change that since I can't see anything. I tried two different install disks to make sure not the problem and got the same thing with both. I tried installing both KDE and GNOME on separate occasions and still same problem. I have used the same install disk to put this on an even older machine and that went fine. I do have windows 7 installed on another partition. I'm fairly new to linux but I'm learning.
I've installed Fedora 12 KDE using VMWare, but I can't for the life of me get my display settings to stick. When I change the resolution, my display responds appropriately but upon logging out or rebooting, these settings are lost. Am I missing something completely obvious here?
I can't seem to pass 1360x768 on my nvidia 9400 gt 512mb ram. The current driver is 260.19.36 and I've installed the recommended current found under additional drivers however I am still limited in resolution. How do I bump it up to my previously used (Windows 7) 1680x1050?
I have tried the tips, and to the best of my ability understand the later posts from the sticky post "Graphics Resolution" however I seem to keep reverting back to the blank screen. I did this:
Quote: ATI TIPS: Note that some ATI cards need flgrlx and some do not... If not then this workaround sometimes works: (Found this in another thread / credit to Quote: Originally Posted by surgus View Post Steps for ATI users:
1. When the boot hangs, press ctrl+alt+f1. 2. Login as user with root privileges. 3. Type "cd /usr/share/ati" and press enter. 4. Type "sudo sh ./fglrx-uninstall.sh" and press enter. 5. Type "sudo reboot".
The above only works for some but not all, depending on what card you have and whether it actually is supported by additional drivers (proprietary). All at the moment, mostl seem to need "nomodeset radeon mode=X", where x= 0 or 1... Some ATI cards are not working with the current natty kernel, but are working with the older 2.6.37 kernel or the proposed 2.6,38.9 kerne (please see post 2)l Sometimes (rarely) it'll work but more often it won't, and in the two times it's worked I haven't known how to get it to remember the setting permanently- keep in mind I have no idea what that last paragraph about x= 0 or 1 means.
Some background to summarise, I have installed 10.10 clean over the top of 10.04. I did not have X/display problems on 10.04. After installing the Nvidia display driver for my device (Asus 8800GT - display driver: NVIDIA-Linux-x86_64-260.19.12.run) in order to get dual-headed display working under TwinView (as I had previously have used on 10.04 problem-free) I cannot reboot/shutdown my machine without a Fatal Error No Screens Found message appearing at boot time.I can hibernate, but this is less than ideal, especially after installing updates which require a restart. Every time this does happen I can re-run the driver installation and all is well again.Below are two copies of my Xorg log. The first is the erroneous log, the second the successful log. Below that is my xorg config file generated via nvidia-xconfig.
ERRONEOUS XORG LOG FILE [ 29.712] X.Org X Server 1.9.0
I'm using Ubuntu 9.10 64-bit with a GTS 250. After installing the restricted driver from NVIDIA's website I get stuck at a 640x320 resolution. The only other option I get is 320x240. The resolution I need is 1680x1050.
I currently have an nvidia 8600 gts w/nvidia restricted drivers and I cannot seem to change the resolution to anything higher than 640x480. Everything used to work perfectly w/the restricted drivers however I downloaded an update and it screwed everything up.
I have tried to edit my xorg.conf file but it seems that either i'm doing something wrong or the nvidia drivers are simply ignoring that file. I tried reverting back to the older versions of the drivers and that didnt seem to work. I tried installing the newest version of the nvidia drivers and that didnt work either. below is my xorg.conf file
I have just installed ubuntu 10.04 32 bit on my girlfriend's computer. She has a NVIDIA GeForce2 MX/MX 400 video adapter and I am having trouble getting the restricted driver working. First I tried it by the books through the Restricted Drivers assistant under Administration. This was successful but on reboot both the boot screen and the desktop environment were at 640x480. No adjustment using the NVIDIA tools was possible. It said that the monitor was unknown. It is a Fujitsu Siemens D-19.1 monitor. I believe however the problem lies with the graphics adapter because I remember it being identified correctly at some point of the ordeal. Next I followed a tutorial and removed all of my NVIDIA packages from the computer. I still have my graphical environment though. After downloading the appropriate (Newer version than that in the Ubuntu repo) driver from the NVIDIA website I entered
Quote:
It says that the installation has failed. I can supply log files of the failure.
My HP Laptop screen is 18.4 in diameter and the only two resolutions that work are the highest a 1920x1080 which is too small for me or 1360x768 which is perfect. That res is no longer available in the latest Nvidia driver.
