Ubuntu :: Poor Resolution During Boot After Installing Nvidia Drivers
May 17, 2010
I have a HP dv6314tx laptop with Nvidia Geforce Go 7400 graphics card. Recently I installed 10.04. Without installing any nvidia drivers my boot screen resolution and desktop resolution were fine. But I cudn't activate Extra Visual effects and so I installed nvidia drivers. Now the problem is that Extra visual effects work just fine. But during the boot, the splash screen has a very poor resolution.
View 2 Replies
ADVERTISEMENT
Mar 25, 2011
I know there are a lot of threads out there for same or similar issues, but nothing I found was working for me until, by sheer chance, I found this very simple solution on the Fedora forums. Too elegant not to share.Environment:Ubuntu 10.10nVidia GeForce 5500Samsung SyncMaster 225BWUsing DVI cable (in case it matters)Issue:After installing the proprietary nVidia drivers, the screen resolution was no longer the correct native resolution of the display. In my case specifically, the nVidia X Server Settings utility was detecting the maximum supported screen resolution was 1280x1024 while my display's native resolution is 1680x1050.Solution:Open a Terminal window.Make a backup copy of the original xorg.conf file. This is just good form any time you are making config file customizations.
Code:
sudo cp -p /etc/X11/xorg.conf /etc/X11/xorg.conf_backup
Open 'xorg.conf' in a text editor.
[code]....
View 1 Replies
View Related
Apr 11, 2011
I reinstalled my computer with Ubuntu 10.10 and the resolution was fine. I turned off my computer last night and when I turned it on today it's back to everything being huge and the screen resolution being 640 x 480. Then when I try to change it, it says my video card isn't supported. All I want to do is revert back to my stock video card in my computer and remove the nvidia one since obviously ubuntu isn't working with it.
View 9 Replies
View Related
Jan 8, 2011
I just installed drivers for this nVidia GPU from the website. Now, whenever I boot, the screen resolution goes to 1024x768 instead of 1280x800 like I want it to. I have to change the screen resolution every time I boot into Ubuntu.
View 5 Replies
View Related
May 15, 2010
I have searched all over the internet for a solution to my problem but I have never found one and it is really frustrating me. Basically when I installed Ubuntu 10.04 on my laptop everything works fine other than extra desktop effects because obviously graphics drivers or not installed yet. All of this is fine and the boot up screen is at my native resolution 1366x768 or something very close and it looks really nice.
The main problem I have is that as soon as I install my graphics driver for nVidia G105m card for some strange reason the boot up screen becomes a very strange resolution and appears to become very glitchy and it is really bugging me. Instead of the boot screen having a nice purple background and the loading bar and word Ubuntu looking nice and smooth it because large pixelated and every time I boot a big green square flashes during the boot up screen.
This problem goes away as soon as I remove drivers but then obviously I lose desktop effects and then that is just as annoying. Now my question is, is there anyway way I can either fix my low boot up screen resolution or is there another way in which i can enable desktop effects without installing my drivers?
View 3 Replies
View Related
Aug 26, 2011
I've recently jump from the Ubuntu/Mint ship, and figured I've give a polished KDE distribution a shot. Of course I turned to OpenSuSE, and I love it so far. I've resisted KDE quite a lot since 4.x came out but it's really come along. Much better than the (in my opinion) monstrous disaster that Gnome has become.
Anyways, on to my problem: I've installed the proprietary Nvidia drivers via the one-click-install shown in the wiki, and that worked great. But now my resolution at boot - that is the boot/loading screen, not my desktop - is shown at a very low resolution instead of my native resolution, like it was with OpenSuSE's default open-source Nvidia driver, which I'm guessing is Nouveau. On Ubuntu, this was pretty easy to correct; all you had to do was edit /etc/default/grub and put your resolution there, and tinker with some other options so that instead of Plymouth trying to set its own, it just carries over Grub's specified resolution. But I can't seem to do that with OpenSuSE. For one, I don't see /etc/default/grub, and more than that, I don't think you guys use Plymouth. I could be wrong on that second point, though. So, how can I change the boot screen's resolution to my native resolution? I'm using the latest Stable release (11.4) and latest Nvidia drivers. Other than that, the install is new.
View 5 Replies
View Related
Jul 13, 2010
I installed Xubuntu the other night (completely wiped machine) and started doing all the updates on it. After a couple of reboots, I changed from the proprietary drivers, to the regular nVidia drivers. After doing this, the startup logo is displayed at a really low resolution. Is there a simple fix to change this and use the nVidia drivers as well?
View 1 Replies
View Related
Feb 27, 2010
I currently have an nvidia 8600 gts w/nvidia restricted drivers and I cannot seem to change the resolution to anything higher than 640x480. Everything used to work perfectly w/the restricted drivers however I downloaded an update and it screwed everything up.
I have tried to edit my xorg.conf file but it seems that either i'm doing something wrong or the nvidia drivers are simply ignoring that file. I tried reverting back to the older versions of the drivers and that didnt seem to work. I tried installing the newest version of the nvidia drivers and that didnt work either. below is my xorg.conf file
[Code]...
View 4 Replies
View Related
May 24, 2010
I have a FX 5200 and a 26" TV with VGA input which supports 1330x760. No problem with this in Windows, but in Ubuntu, as soon as I install nvidia drivers (175) resolution goes 640x480.
I've tried editing xorg.conf in several different ways, but resolution didn't change, maybe I was doing it the wrong way.
PD: 10.04 Lucid Lynx fresh install
View 1 Replies
View Related
May 2, 2010
You know, the "ctrl+alt+F5" type things, where you go to those pure command lines? I installed Ubuntu 10.04 from scratch, and everything was working great! Good resolution, etc. When I booted up my computer, the (very brief) splash screen fit the entire resolution of my monitor (1680x1050), and the X server did the same.
When I'd go to one of those 'tty' terminals, I was surprised (in a good way) to see that they had scaled to my monitor's resolution as well. I was looking forward to using that. Well, time came where I wanted to turn on Compiz, so I downloaded/installed the nVidia drivers. Well, they work. I can work with Compiz and 3D games at full speed and full resolution in Ubuntu, and I have zero complaints about that.
What I do have a complaint about is that the terminals (tty5, in the above example) are back to that old resolution, 640x480 I believe. Also, that brief splash screen is at the same horrible resolution, instead of the full resolution I had on the old nVidia driver that didn't support 3D effects.
Is there a way to get that back? Is it a bug or a glitch that it's no longer scaling the tty's to my display resolution, and do I just have to wait for an update?
View 3 Replies
View Related
Jul 17, 2010
I have a Philips 19' HDTV I use as my monitor, I have tried every guide out there, including the wiki one with xandr. Nothing works for me. This seems like it should be way easier, set custom resolution go.. but this isn't the case.
Using Ubuntu 10.04 -
I've tried editing the xorg.conf and adding the modelines and changing the modes , I've tried the xandr commands. I've tried guides from years ago to current ones. I'm desperate, Everything is cut off like maybe an inch not even. Can just barely see the edges of the top and bottom bars.
I've been working on this for many many hours coming up with nothing every time. I wish there was a way to just resize the desktop.
Here is my most recent attempt at the conf file.
Quote:
View 3 Replies
View Related
Oct 20, 2010
I have a BIG issue with my fresh Maverick install : when I install proprietary drivers via the graphic utility, either one proposed, the screen resolution is then max in 640x480. But I have hardware acceleration and compiz effects !
I tried, I think, everything. Forcing the resolution in xorg, in monitors.xml, try the newest ones via the ppa, install an older (and used to be working I'm positive) one with .run (which just prevent any graphic display).
View 9 Replies
View Related
Jul 26, 2010
I have an nVidia GeForce 7600GS with a dual monitor setup. A 19" Dell @ 1280x1024, and a 19" widescreen Acer @ 1440x900. The Dell is attached via DVI, and the resolution is detected properly, and set, but the Acer is connected via VGA, and so the native resolution is unkown to the nvidia control panel. It will only let me set the resolution up to 1024x768. I had it create the xorg.conf file, and i tried to edit it manually, changing its
[Code]...
View 9 Replies
View Related
May 31, 2010
I am new to opensuse and have installed 11.2 KDE. It is simply perfect for my system. However after the initial setup the display resolution was set perfectly fine for my 18.5" LED monitor, default resolution was 1366x768, and everything looked good from desktop to fonts but the OSS drivers didn't support compositing so I decided to switch to nvidia drivers. I installed the driver as shown in openSUSE repositories page, for my 6600GT card. Now after rebooting everything is stretched,even the fonts look really ugly and fuzzy.
I am unable to find any mode in Nvidia XServer settings that would correct the current ugly stretched display. I am unable to set 1366x768 manually as well, doing so my PC won't boot to KDM but rather sticks to console. Now it's for sure that my monitor and display card supports 1366x768 resolution but it's just that nvidia drivers/Nvidia XServer settings won't let me set that resolution. How can I set the resolution or even better if I can enable compositing using OSS drivers then that would be great an dm willing to switch back.
View 9 Replies
View Related
Apr 9, 2010
When I had a wubi install(after I restarted, logged in, etc.) a little icon appeared in the top right-hand corner of the screen informing me of an nvidia driver update, which was required to run compiz desktop effects. Now I have ubuntu installed on an actual hard drive(wubi was deleted beforehand) and I get no such icon. So I'm wondering how to update my drivers. BTW I have a 9500GT
View 2 Replies
View Related
Aug 1, 2010
My native resolution is 1366x768.
View 8 Replies
View Related
Aug 19, 2010
Ubuntu's logo is to big after installing Nvidia drivers, how can i fix this?
View 4 Replies
View Related
Jun 19, 2011
Three times so far I have had to re-install ubuntu because I installed an updated or new Nvidia graphics driver for my GeForce FX 5200 The first time, using Natty Narwhal, I installed an updated graphics driver, and upon reboot, I was presented with a blank screen that did nothing. Being a first-time Ubuntu user, I assumed it was me, or a bug in the new release. So I burnt a Lucid Lynx cd on another pc, and installed that instead. Same problem when I installed a new graphics driver, again via Admin>>Hardware Drivers. Reboot yielded a blank screen. Booted from cd again, as I had no files yet to worry about, and everything seemed to be fine, providing I stayed away from that tempting hardware drivers button.
I then accidentally installed a new driver when installing the dependencies(via terminal) for OGRE (Object-Oriented Graphics Rendering Engine) This time, my terminal froze, Firefox wouldn't boot, and a reboot yielded a blinking, blank login screen that did not do anything. Obviously, I'd like to have a graphics driver, as currently I can't run anything that needs 3d acceleration (Games, 3d simulations, even Desktop effects), but it's not absolutely necessary. So if nobody can suggest a fix, short of a new computer, new graphics card etc, can anybody suggest a way that I can stop myself accidentally installing anything driver-ish? The driver worked fine on windowsXP, but there's two reasons I'm not going back to that: a) I hate it. Hate, hate, hate.b) I've lost the activation key that came with computer, so I can't reinstall.
Further detail can be provided on request. Computer is Dell Dimension 2400, 256Mb RAM, Hard drive is almost empty. Old and slow, but I like it.
View 5 Replies
View Related
Apr 29, 2010
after installing the NVIDIA propriety drivers for my 8600 GTS, the loading screen that is shown when booting ubuntu is low quality. Does anyone know how to fix this,
View 9 Replies
View Related
Apr 26, 2011
I'm new to linux, and i have installed linux slackware 64bit..after a complete setup i downloaded the latest Nvidia proprietary drivers, the binary package from nvidia.com..i have a geforce gts250..it's the first time i encounter this issue..i have already installed the driver with my old monitor (an lg flatron with max 1680x1050)and it always worked fine..with this new monitor (lg w2243s with a res of 1920x1080) it seems that every bin package from nvidia don't recognize the monitor...after installing i find a res of 640x480 and i get stucked, i tried to force it by editing the xorg.conf file..but nothing changes..how can i get the max res with nvidia bin package?
View 3 Replies
View Related
Aug 5, 2009
I have scoured the web the last few hours and I have come across a plethora of similar problems relating to Ubuntu and Nvidia drivers. However, I still havent found a sufficient cure for the problem.
The exact problem I face is that as soon as I install the Nvidia recommended drivers using the "Hardware Driver Manager", I restart the system but it never gets past the login splash screen. After I log in it simply goes to a black screen and sits like this indefinately.
Does anyone know of a particular fix for this problem? I am at the end of my tether and there is no way I can use Linux if it means either getting a different graphics driver or sitting on a 800*600 resolution. (Not to mention I dont have acclerated 3d support...so no DVD playing!)
I have a Nvidia GeForce4 MX graphics card and im a complete n00b to Linx so please go easy on the technical jargon.
View 3 Replies
View Related
May 24, 2010
I just installed a fresh copy of unbuntu 10.04 and downloaded the lastest drivers for my video card but when double click the file, i get a message that says "could not open file/home/desktop name/download/n...nux-86-96.43.16-pkg1.run."Anyone know why this is happening? A friend told me to try to run them in terminal so when i opened the drivers with terminal I get a message saying "error: nvida-installer must be run as root"
View 9 Replies
View Related
Jun 19, 2010
I just installed Ubuntu 10.04, it was all working like a charm until y tried to install nvidia's propietary drivers using the integrated hardware drivers manager. Now ubuntu just boots into a non graphical tty. How can i fix Xorg?I have an AMD Athlon X2 5200+, the chipset is a nForce 430 with an integrated Geforce 6150.
View 1 Replies
View Related
Oct 7, 2010
I have installed Ubuntu Maverick 10.10 RC in my PC, everything works fine, but after install Nvidia proprietary Graphics driver it boot up on a blank screen (I can hear the login sounds, etc) but screen is absolutely black.
I try to login in recovery mode and check if something is wrong but nothing happens (even adding noveau driver to a blacklist (editing grub)) Now I have re installed Ubuntu 10.04.1 and works fine but I would like to install the 10.10 version, since I have this inconvenience, I cant do it.
My graphic card: Nvidia Gforce 8400GS 256MB Pci Express
View 9 Replies
View Related
Feb 28, 2011
I just installed Ubuntu last night parallel to windows vista ultimate (no problems). My biggest problem is that when I tried to install the nvidia display drivers, I somehow downloaded a server based driver (and am having amazingly difficult problems). I use a dual monitor set up (both are plug and play LCD displays) and i'm not too worried about aesthetics but rather, performance. I downloaded the correct driver but now I don't know how to install it. Is there a way to uninstall this server driver?
View 1 Replies
View Related
Apr 28, 2011
since installing nVidia graphic drivers I can't adjust volume using volume button nor using volume keys. The volume icon has 3 horizontal lines like Ubuntu couldn't find audio device. Morover when I try to run pulseaudio there is "/home/chris is not ours" message.
Despite these facts audio is playing and I can adjust volume using alsamixer, but it is extremely not comfortable to enter console each time I want to volume up/down..
View 3 Replies
View Related
May 27, 2010
I'm still getting used to the system. I've been able to install a couple of packages like Disk Manager and Firefox, and was able to mount my ntfs drive. I've only learned some basic terminal commands, but I'm managing ok so far. That is until I looked into what was involved in installing the video drivers I need for my Nvidia 8400 GS card. (ouch!) I'm trying to follow the guide here: [URL] but I've run into a snag in the 'Overview' part: "0. Make sure APT has non-free and contrib sources (consult the sources.list(5) man page for help on doing this) " The link provided [URL] is dead. With only a basic understanding (next to none) of what the sources.list is for, I'm unsure how to fulfill step 0.
View 9 Replies
View Related
Sep 10, 2015
According to this link [URL] , I should be able to install the package through experimental on Jessie.
View 9 Replies
View Related
Mar 4, 2010
I got fedora 12 like 2 weeks ago. I am newb in using linux. I got enough of the problems windows 7 has and thought to change on something good and free . It seems OK but i want to try play some online games on fedora. Seemed it did not have video card drivers installed and tried to install them. Once i installed some kind of video drivers using a yum command i found on web. But i think something was wrong because when i tried the first game installed with wine it worked as if i didn't have video card . Even yahoo messenger works very bad as if i won't have video drivers. I remember at the middle of that installation it shown kind of error like it did not find something.i don't remember exactly what it shown because immediately after that it continued to install video card drivers. But after i tried that game it still seemed something wrong happened. So....how can i see what video drivers i have installed ? Do i need to uninstall them before trying again? I got a CD with drivers when i got my notebook do you think those will work if i install them using wine ?
View 2 Replies
View Related
Mar 15, 2010
I installed OpenSuse Gnome version 64 bit on a HP laptop DV7 Intel Dual Core with nVidia 9600 GM cardAll went well, until after I had installed the nVidia drivers from this page: NVIDIA drivers - openSUSEI selected the Geforce 1-click install and Yast went on to installl all the packages (a lot of 32-bit),took about half an hour.I logged out/in, and could work as normal, until I rebooted. Maybe I waited not long enough (5 minutes), but the screen was blank, then I gave up.Anyone has an explanation. I can always re-install everything, but then what went wrong with the nVidia package
View 9 Replies
View Related
