I'm having trouble getting my microphone to work. Here is my sound card:
:~$ lspci | grep Audio
00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)
I've installed pulseaudio but I still cannot get any sound through the mic.
I'm on 5.4 with a Shuttle X50 and am having a lot of trouble getting sound working on this box. In Gnome the card is detected properly and nothing is muted, but no sound comes out of the speakers when I do the test. Checked in the bios and the audio is enabled so I'm stumped... heres some info for reference:
[Code]...
It always fails when I try the sound card test. It says like the system cant detect the sound card.
Sound Card: 5 series / 3400 series chipset high definition audio
Module: snd-hda-intel
After searching about the issue, I found the information that installing kmod-alsa-PAE-1.0.20-1.el5.elrepo.i686.rpm and kmod-alsa-1.0.20-1.el5.elrepo.i686 would solve the problem.
But even I downloaded and installed them, nothing changed.
== BEGIN uname -rmi ==
2.6.18-194.17.1.el5PAE i686 i386
== END uname -rmi ==
== BEGIN rpm -q centos-release ==
centos-release-5-5.el5.centos
== END rpm -q centos-release ==
== BEGIN ls /etc/yum.repos.d ==
CentOS-Base.repo
CentOS-Media.repo
elrepo.repo
epel.repo
epel-testing.repo
mirrors-rpmforge
rpmforge.repo
rpmfusion-free-updates.repo
rpmfusion-free-updates-testing.repo
rpmfusion-nonfree-updates.repo
rpmfusion-nonfree-updates-testing.repo
== END ls /etc/yum.repos.d ==
== BEGIN lspci ==
~
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
~
== END lspci ==
== BEGIN lspci -n ==
~
00:1b.0 0403: 8086:3b56 (rev 05)
~
== END lspci -n ==
I was reading this article on how to fix the sound in Ubuntu 9.10 after upgrading from 9.04 [URL] and when I open GNOME ALSA Mixer, nothing shows up (I have included a picture). I typed in:
[Code]...
I am having hard time playing a high definition video file (.mp4), the video initially plays fine, but after 5 mins, it starts to skip and stutter, (I use Movie Player with some codes that Ubuntu installed when I first tried to play file) I have a Dell XPS M1330 Intel Core Duo @2.20 GHz with 4 GB RAM.
View 4 Replies View RelatedI am like almost everyone, watching videos on ..... and I am having problems with flash. When I put a video on - even if high definition or not I still get a studder from flash. The video plays but it keeps chopping up and you can see on some frames how the next frame moves on the bottom of the screen and the previous frame is still stuck on the top. Flash does not run smoothly at all - that is on every video. I am suppose to be on the latest flash version for linux off of addobe.
View 4 Replies View RelatedYesterday I've installed Debian 8.1.0 on my desktop pc. I'm using Nvidia GT 730. After booting, the GPU fan runs at very high speed and really gets overheated. I didn't install any drivers etc.
Is there a solution for this or do i have to switch to Intel/ATI to use Linux? I said Linux, because every distros i've installed makes Nvidia chipset overheated and the fan runs at max. speed.
I'm terrified about making the GPU burnt.
I'm having some issues with audio crackling/buzzing when turning up the volume, or on songs that have overclipped / overdriven parts, which doesn't happen on Windows (on it those sections are just "dampened"). Is there some certain settings in ALSA that are used to deal with this? Or is it something specific to the driver for the hardware? Speaking of which I'm using some integrated audio which goes by the name of Intel ICH7, and the chip itself is Analog Devices AD1981B.
I'm only using ALSA, without PulseAudio, and I've made sure the volumes both in the media players and under alsamixer aren't turned too high (PCM is at 47% and "Headphones" -- what is "Master" on Windows and on other soundcards under Linux -- is on 22%), so it isn't an issue with the software mixer being turned up too high. Also I'm using a pair of quality headphones (Sony MDRV55) so it's not an issue with the analog audio output either. I've also tried multiple other headphones and the result is the same.
I recently switched from jessie to stretch on both i encountered a jerky ui in gnome 3. after a longer research i noticed xorg consumes over 80% of my first cpu-core while moving a window. for testing purposes i switched back to the nouveau driver and there is no high cpu usage while moving a window, also the ui is smooth.
i tried 3 different nvidia driver: the one from the debian repository, the current stable and beta driver from the nvidia site. i noticed on all 3 the same problem.
Code: Select alldaniel@Daniel-PC:~$ glxinfo | grep rendering
direct rendering: Yes
  GL_NV_path_rendering, GL_NV_pixel_data_range, GL_NV_point_sprite,
  GL_NV_path_rendering, GL_NV_pixel_data_range, GL_NV_point_sprite,
  GL_NV_path_rendering, GL_NV_pixel_buffer_object, GL_NV_polygon_mode,
xorg.log: [URL] ....
dmesg: [URL] ....
system:
nvidia gtx 760
intel xeon e3-1230v3
I've seen this problem on dozens of different forums but I haven't found anybody with my specific problem or a solution that has worked. I have an nVidia GeForce 8400GS which I just installed in my Debian box and I can't get the HDMI audio to work. Kernel version is 2.6.32-5-amd64, nvidia driver version is 260.19.36, alsa version is 1.0.21. Output of lsmod shows that nvidia module is loaded. Output of aplay -l code...
I feel like I've looked everywhere on the internet for a solution to this and I just can't find one. It seems that everybody is able to see their nVidia audio device using aplay -l and then the solution goes from there.
I am a new Ubuntu user and am having trouble getting the audio to work through the hdmi out to my tv using an Nvidia Ion graphics/sound card.
As far as I can make out Ubuntu recognises the sound card l but i cant get any sound out of it and don't know to go about altering anything.
I have installed Fedora 15 on a Mac mini 2.4. Everything works fine except the audio and wireless devices.
lspci shows this:
In the gnome, the network option only shows the wired connection. I tried to do yum install kmod-wl which downgraded the graphic display and didnt help in wireless issue. I reinstalled nvidia driver. the lspci is after doing all this stuff.
I am trying to get audio to play in tv/monitor via HDMI cable. It seems ALSA does not recognize my nVidia audio device and can only use the onboard audio device. Here's some relevant info I have collected:
[Code]...
When i was using windows it shows up and works, so thus it has to have the hardware onboard and the support for it sans the driver. It's incapable of working, i don't know why but it's not listing it, and it's just not working with it. I've tried a million times before to find a fix and they only have them for the desktop drivers and not the mobile ones. I was glad to see that i could finally use a second monitor correctly in linux now but the hdmi audio thing is driving me loopy and there doesn't seem to be anyone else who has posted with this issue before.
[list=] aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC663 Analog [ALC663 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
[Code]....
Just noticed that during calls skype uses ~30-50% cpu, + pulseaudio uses ~20%. I found some old threads on this like [URL] Or [URL]. The former suggests to purge pulse and use alsa/oss instead. The latter suggests changing mic in skype to DeviceXX and tweak the pulse.conf
There's also a launchpad bug on that with status Confirmed->invalid (due to "problem fixed in skype 2.1 beta") but looks like it's not (I am using 2.1 beta)
1. Does any1 has this problem?
2. I can't try 2nd link's approach as my skype has only PulseAudio in the settings, so I can't select Device or anything else!
3. Should I try to remove pulse in favor of ALSA? I'm pretty happy with pulse otherwise that this issue, I use it to record sound out of my sound card and I'm not sure if I can do this with alsa/os.
I just posted about this in this thread, but as the other thread was started by a KDE user then I thought I'd post here as well. I've had high CPU usage for a few months now - probably since trying the 0.9 branch of Compiz then dropping back to the default openSUSE builds (XOrg and gconfd-2 running a Core i5 at about 30% on every core*). I've now finally found a solution after deciding I wanted to fix it once and for all.
Once again, the Ubuntu forums come to the rescue with this thread (I don't like the distro as a whole, but I do find the forums useful!). I'm using Compiz, but it turns out that Metacity was running as well. A quick "killall -9 metacity" and the gconfd-2 process has vanished and XOrg settled down to its normal 1-2% (which is reasonable when I've got a Conky config refreshing every fraction of a second to repaint a sound visualiser!). Now I just need to find out why Metacity starts when I'm using Compiz...
* according to Conky's per-core graphs, although top only reported 15% overall and the Conky "top 3 procs by CPU" reported a measly 3% for each process, so someone's maths was out somewhere!
I have the Debian 8.1 problem on the Intel Broadwell system , there are some issue which we have been found below.
1.Onboard eDP panel is not work.
2.Onboard DP audio has no sound
3.Intel WLAN is not work.
4.Intel onboard LAN is not work.
OS : Debian 8.1
CPU: Intel i5-5300U
Graphic : Intel HD Graphics 5500
Wireless : Intel wireless 7265AC
i've installed debian 8 on this laptop but can't use the nvidia card from nvidia-detect can't find the card but it work 'cause i can see it in the list of hardware, 3d controller the driver from nvidia don't work, and i had a problem with force installation and xorg.conf file.. how i can make it work ? the card it's nvidia 820m
View 3 Replies View RelatedDoes this latest nVidia driver (version 260.19.12) work with the default Linux kernel in Debian Squeeze? And does it require any additional packages before installation?
(I cannot test it myself, since it's my brother who recently bought a new nVidia card)
I installed the NVIDIS driver for 64b Linux, and now I face a high cpu utilization (up to 40%) in the XORG when I swith from one application to another. I need the driver because otherwise some web pages are rendered with a something like a watermark
LSPCI
01:00.0 VGA compatible controller: nVidia Corporation G98M [Quadro NVS 160M] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Dell Unknown device 024f
Flags: bus master, fast devsel, latency 0, IRQ 169
Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0000000 (64-bit, prefetchable) [size=256M]
Memory at f2000000 (64-bit, non-prefetchable) [size=32M]
I/O ports at df00 [size=128]
[virtual] Expansion ROM at f4000000 [disabled] [size=128K]
Capabilities: <access denied>
NVidia driver
260.19.21
uname -r
2.6.18-194.26.1.el5
i have both pulseaudio and gstreamer installed, my "multimedia audio controller" claims to be a ESS Technology ES1988 Allegro-1 in the system information window and in the report i generated it says my Audio Adapter is "MPU-401 UART - MPU-401 UART" PulseAudio tells me Connection failed: Connection refused and the volume control that came with the system says No volume control GStreamer plugins and/or devices found. I am not understanding, here. do I need some driver that i don't have? i installed all the gstreamer plugins that seemed to pertain to volume that i could find. If i am not very much mistaken, I am using Debian Lenny.
View 5 Replies View RelatedI'd be grateful for any suggestions to get a second TV/Monitor to work in addition to the desktop monitor for a PC which runs Lenny. The first monitor is a small TFTLCD 15". Works perfectly with a GEForce FX 5200 nvidia graphic card and uses the 173.14.09 driver. Having obtained an SVGA cable, I connected the card to a rather larger 32" LCD Panasonic TX-L32S10B TV to enable some armchair viewing of internet etc for my parents. The Panasonic TV or monitor shows all the boot messages but the graphical server fails to start. I know that both screens work, either alternatively or simultaneously, having tested with a Puppy live CD.
However, running
nvidia-xconfig --twinview results in an incorrect screen resolution for the 15" TFT Monitor; Gnome Screen Resolution Preferences gives a rather surprising fixed setting of 2048x786/50Hz when the maximum should be 1024x768. The resulting xorg.conf file is:
cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildd@ninsei) Fri Sep 5 22:23:08 UTC 2008
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
[Code]...
I have problems with xrandr in a system with Nvidia GeForce 8600GT video card. I want to use xrandr to rotate the screen on the fly.
~:$ xrandr -q
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 320 x 175, current 1600 x 1200, maximum 1600 x 1200
default connected 1600x1200+0+0 0mm x 0mm
1600x1200 50.0*
1600x1024 51.0
[Code]....
I tried enable the last option, change values for xinerama and twinview, but nothing works.
I am running Debian Testing and can't get Plymouth Splash to work on my system.When splash is put in the grub line it locks up on boot up.Here are my system specs:
Code: Select alldcihon@solydk64 ~ $ inxi -Fxx
System:Â Â Host: solydk64 Kernel: 4.2.0-1-amd64 x86_64 (64 bit gcc: 4.9.3)
      Desktop: KDE Plasma 5.4.3 (Qt 5.5.1) dm: sddm,sddm Distro: SolydXK 9 solydxk
Machine:Â Â Mobo: ASUSTeK model: M3A78-EM v: Rev X.0x Bios: American Megatrends v: 2003 date: 10/12/2009
[code]....
I am "old" Linux user. I use Debian with satisfaction on my old PC for many years. I have a new notebook: HP Envy 17 j112nl :
main characteristics:
- Intel® Core™ i7-4710MQ con scheda grafica Intel HD 4600 (2,5 GHz, 6 MB di cache, 4 core)
- 12 GB di SDRAM DDR3L a 1600 MHz (1 x 4 GB, 1 x 8 GB)
- NVIDIA GeForce 840M (2 GB of DDR3)
- Backlit keyboard --> good work "out of the box" !
- Fingerprint readers
- Beats Audioâ„¢ with 4 speakers + 2 subwoofer
Of course i have install Debian 8 Jessie (Testing - AMD64).The main problem of this notebook is "Beats Audio" Chip IDT 92HD91BXX. After install Debian use by default only the base ones: no subwoofer, URL...
Some other info about my hardware:
Code: Select all$ lspci |grep -i Audio
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
I am running squeeze on a PC 1386 and installed nvidia by using the packages in unstable. I was able to install nvidia and there was no error until the time I started X. The error is unable to load module "nvidia" (module does not exist, 0).
I looked up the log for Xorg and it says Unloadable Module "nvidia".
I spent the entire 24 hours to fix it because this is my office computer and I practically done all the stuff found in the forums. I already did nvidia-xconfig to no avail. I even edited xorg.conf manually and still it was not up.
I have some suspects however which are:
1. Different versions between kernel and nvidia (but since I did it the debian way then I should not have any problems).
2. Nvidia-glx is unusable in Squeeze, so does it mean I go for the unstable distro?
3. Or I miss something crucial on how I installed it?
By the way, I installed Nvidia because I am using a SAMSUNG 21' LED monitor.
I'm trying to install the nvidia drivers but it is not working.
lspci | grep VGA
02:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX - nForce GPU] (rev a3)
My xorg.conf looks like this:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
[code]...
And after that my X is not working. And when i try sudo modprobe nvidia I get this:
FATAL: Error inserting nvidia (/lib/modules/2.6.26-2-686/nvidia/nvidia.ko): No such device
Unable to get high res, colour or 3-D acceleration working with 8.04 Hardy. Not a hardware problem as it works perfectly in dual-boot XP.
[Code]...
I'm not all that familiar with what it is that the expensive SATA cards do, other than providing on-board cache and many ports, but all things considered what can't a CPU and lot's-o-RAM do that an expensive SATA card can?This assumes, of course, that you weren't planning on using the CPU to run other applications (i.e. a SAN type setup).
View 11 Replies View RelatedI'm trying to get audio over HDMI.
I can't seem to get the Nvidia card to show up as a sound card.
System Info:
Debian "Sid"
kernel: 2.6.32-5-amd64 (2.6.32-29)
alsa: 1.0.23+dfsg-2
Code:
I've tried adding "options snd-hda-intel enable_msi=0 probe_mask=0xffff,0xfff2" to alsa-base.conf, variations of those options don't seem to have any effect, or sometimes break the ATI audio.