Ubuntu Installation :: Upgrade 10.10 Server To 11.04 Server Failed?
Apr 30, 2011
I am running 2 Ubuntu servers, one as UEC frontend and the other as UEC node. I started, last night, the server upgrade on the frontend. As it promised to take several hours I left it alone to proceed through the night. This morning it was waiting on a prompt which, by virtue of hitting esc to relight the monitor, it continued upgrading packages. At some point subsequent to that it paused on a discrepancy between the eucalyptus.conf file the install wanted to save and the eucalyptus.conf file that existed. I reviewed the deltas and determined that the current, as it existed, would suffice. I received 3 more messages on the console:
Installing new version of config file /etc/init/eucalyptus-network.conf. Installing new version of config file /etc/init/eucalyptus-conf...
eucalyptus start/running process 15290
Then no further console messages nor apparent disk or cpu activity
I can shell into the machine and see the following:
Code:
root 7077 6784 0 Apr29 tty1 00:00:33 /usr/bin/python /tmp/update-manager-0r8nH5/natty --mode=server --frontend=DistUpgradeViewText
[Code]...
View 9 Replies
ADVERTISEMENT
Nov 19, 2010
I tried to install php from source file on centos server and i got the error as # ./configure --with-apxs2=/usr/local/packages/apache/bin/apxs --with-mysql --prefix=/usr/local/packages/apache/php --enable-force-cgi-redirect --disable-cgi --with-zlib --with-gettext --with-gdbm
checking for specified location of the MySQL UNIX socket... no checking for MySQL UNIX socket location... /var/lib/mysql/mysql.sock checking for mysql_close in -lmysqlclient... no checking for mysql_error in -lmysqlclient... no configure: error: mysql configure failed. Please check config.log for more information.
View 6 Replies
View Related
Jul 7, 2010
I have a dedicated server with Fasthosts. It's currently running Ubuntu Server 8.10 and I want to update it to 10.04.
The only issue I have so far is it runs Matrix Server Appliance 2.0-38
Does anyone know if this will be affected by the upgrade in a bad way?
I have had no luck finding a site for Matrix or any other information.
For the upgrade itself, I was hoping to run do-release-upgrade.
View 2 Replies
View Related
Jun 7, 2011
I've just upgraded by dedicated server with OVH from 9.04 to 10.04 and it now refuses to boot with the error "kernel panic unable to mount rootfs on unknown block 2,0" With OVH you must use their custom kernel, but this has been installed and seems to boot thus far, but fails at above. OVH also recommend adding a dev line to fstab, which I've done: [URL] I'm now at a loss as what to do, as it seems the kernel can't see the hard drives, yet when I boot up in rescue mode, I can mount all the drives fine.
Files of interest below.
lilo.conf
Code:
boot=/dev/sda
prompt
timeout=50
default=linux_updated
[code]....
View 2 Replies
View Related
Feb 2, 2010
Does 9.1 server require a 64 bit processor? When I try to install it I get the message."This Kernel requires an X86-64...."
View 2 Replies
View Related
May 24, 2010
I am getting these error in RHEL 5.3 while i did "yum update".
---> Package libstdc++-devel.i386 0:4.1.2-46.el5_4.2 set to be updated
---> Package libstdc++-devel.x86_64 0:4.1.2-46.el5_4.2 set to be updated
---> Package libstdc++44-devel.i386 0:4.4.0-6.el5 set to be updated
[code]....
The program package-cleanup is found in the yum-utils package.
View 2 Replies
View Related
Jun 29, 2011
When I am trying to run the Xserver using the command startx I am getting the below mentioned error
xauth: creating new authority file /oracle/oracle10g/.serverauth.22555
Fatal server error:PAM authentication failed, cannot start X server. Perhaps you do not have console ownership?
[code]....
View 2 Replies
View Related
Jun 7, 2010
After searching the forum I could not find a clear answer to my question so I am giving it a try...
I have installed a LAMP server with Postfix as mail server. The scripts send email as user www-data using the mail server on the same machine.
However, the email got rejected by external mail servers (failed reverse DNS check) so I setup a mail server that meets all needed requirements.
Now I would like to use this second server instead of the mail server on the LAMP server. I found that this could be done with changing sendmail settings in php.ini (I think).
However I am not sure how that will go: www-data is no actual user on the new email server (which requires authentication before sending). Do I need to create a new user on the email server or change the settings in php.ini to match an existing user?
View 1 Replies
View Related
Mar 4, 2010
I realize this probably isn't the best place to be posting this as it relates to project open, but they don't have a forum.
We recently upgraded our Ubuntu server and now when trying to use project open we get the follow error message, does anyone know why this may be, or have any guesses as to why this may be.
Server startup failed: Error during bootstrapping
No fullquery for dbqd.acs-tcl.tcl.apm-procs.apm_package_installed_p_not_cached.apm_packa ge_installed_p and default SQL empty - query for statement missig while executing
"error "No fullquery for $statement_name and default SQL empty - query for statement missing""
(procedure "db_qd_replace_sql" line 10)
code....
View 7 Replies
View Related
Mar 6, 2010
I recently brought home an old Compaq server from work. I was told that it works fine. When I brought it home, I tried installing Ubuntu 9.10 server from a cd. While it's trying to install, I get the message "Installation step failed. An installation step failed. You can try to run the following item again from the menu, or skip it and choose something else. The failing step is: Load installer components from CD." I turned off the computer and tried it again several times. Each time the same message appears.
View 5 Replies
View Related
Sep 19, 2010
ENV: openssh-server-5.4p1-1.fc13.i686 Problem: I am unable to ssh using Putty (when using ssh-auth/pki) to a fedora box . I get the message: Server refused our key. Here's what I tried so far:
- Tried generating rsa (as well as dsa) keys on the linux server and put the generated public key in the ~/.ssh/authorized_keys. Then I converted the private key using PuttyGen.
- Also, tried generating keys using PuttyGen and then converted the public key and placed it on the server
- Configured the sshd server (ssh_config) for using RSAAuthentication=yes. Tried all combinations and purmutations; however, I still get the "Server refused our key" error.
View 10 Replies
View Related
May 16, 2010
I tried to upgrade ubuntu from 9.10 to 10.04. It is almost complete downloading packages,but i get this error:Failed to fetch http://archive.ubuntu.com/ubuntu/poo...untu2_i386.deb The HTTP server sent an invalid Content-Range header [IP: 91.189.88.30 80]I tried to change from main server to US server, but I still get this error.
View 1 Replies
View Related
Mar 6, 2011
We have a CentOS server which has beed restarted due to some reason. Now we have ping to the server and we can reboot it via KVM, but the server loads to some messaageThis is filter.unknown_domain (Linux ...)Filter Login:and then it stops. Do you have an idea what might be the problem and how can we fix it?
View 2 Replies
View Related
Mar 9, 2011
I would like to implement something when a server is offline for whatever reason. For example. I got my own DNS servers and webservers. I would like it if the users goes to www.somedomain.com and the server it is actually on is down for maint. or For whatever not able to respond. What can be done so that if the server isn't able to be contacted that it can point to either a another server or the dns somehow can display a page stating who to contact to report a problem or to let them know its down for maint. And can goto a site to check the status or whatever.
View 7 Replies
View Related
Jun 23, 2009
I am a newbie trying to install XMLSec on my server. I have CentOS 5 with OpenSSL 0.9.8b. I downloaded xmlsec1-1.0.3-1.i386.rpm from [URL]. While doing rpm -Uvh xmlsec1-1.0.3-1.i386.rpm I get the following error message.
error: Failed dependencies:
libcrypto.so.4 is needed by xmlsec1-1.0.3-1.i386
libxml2.so.2 is needed by xmlsec1-1.0.3-1.i386
libxslt.so.1 is needed by xmlsec1-1.0.3-1.i386
I also downloaded RPM's for libxml2 and libxslt from ftp://xmlsoft.org/libxslt/ but each package give further errors rpm -Uvh libxml2-2.7.3-1.x86_64.rpm warning: libxml2-2.7.3-1.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID de95bc1f error: Failed dependencies: libxml2 = 2.6.26 is needed by (installed) libxml2-python-2.6.26-2.1.2.7.x86_64
and
[Code]....
View 1 Replies
View Related
May 9, 2010
I'm trying to update an Ubuntu Server install to 10.04. I believe something went wrong when I upgraded it from 8.10 to 9.10 in the past. Currently /etc/apt/sources.list would indicate the system is running 9.10, but /etc/issue says 8.10, as does lsb_release -a.
apt-get update and apt-get upgrade show everything is up to date. When I do a do-release-upgrade it tells me that there are no upgrades available.
View 2 Replies
View Related
Jul 23, 2010
I should have caught this during the upgrade, I saw the potential problem but failed to write it down. All my applications served by Tomcat fail to load. Catalina logs show the following error for each app. Error deploying configuration descriptor msgboard.xml The complete error for an individual application is
[Code]...
Again, during the upgrade a warning popped up that each app would need to be spelled out in some configuration file SOMEWHERE because of a change in security! Would someone be so kind as to direct me as to where and how this would be accomplished. I apologizes for not being able to find this out on my own but have looked and can't find it. I'm pretty sure anyone proficient with Tomcat on Linux will know what and where these changes need to be made. Or if anyone knows if and where there is a log of all communication during the upgrade I might be able to figure this out on my own. Is there such a log kept during an upgrade? Also if this question would be more appropriate in the Server Platforms forum I will do that.
View 4 Replies
View Related
Sep 7, 2010
I can install 6.06 desktop, but would like to move to a 8.04 server. I know I can do an upgrade from 6.06 desktop to 8.04 desktop, but how about to server? cdrom issues and heartache associated with other means of alternate iso installs are beating me up.
View 2 Replies
View Related
Mar 14, 2010
I got a root user command prompt - what do I do next? Edit /etc/X11/xorg.conf? How?Do I need to boot up a live CD?
View 1 Replies
View Related
Apr 29, 2011
After upgrading to 11.04 (x64) in the second monitor I see just the background but no desktop. X server configuration was done in previous versions with NVIDIA X server settings tool.
View 3 Replies
View Related
Jun 9, 2011
I was having trouble figuring out how to upgrade my file server (running 9.04 x64 desktop) to 10.04 so I asked google. It led me to this webpage: [URL]... which told me to run this command:
Code:
cd /etc/apt
perl -i.bak -pe 's/jaunty/lucid/' sources.list
aptitude update
aptitude dist-upgrade
It ran for a bit and now it says that it is running 10.04.2 LTS, but I am unable to get any updates. When I open the update manager it tells me "Not all updates can be installed" and says that I need to run a partial upgrade. When I hit partial upgrade it then tells me that "An upgrade from 'lucid' to 'jaunty' is not supported with this tool." This comp serves as my web/sql/file server so it's pretty important I keep it functional. Everything else seems to be working fine though which I can only assume is a good thing. Here's a copy of my sources.list:
[Code]....
View 5 Replies
View Related
Jun 14, 2011
Recently i upgraded my laptop from ubuntu 9.10 to 10.04 but alas! after the upgrade i don't get anything, just the 10.04 boot up screen and my cursor after some time. when i run it in recovery mode and tried to startx from there , it gave me a message " no protocol defined " now i can only access my system in failsafe x mod. code...
View 2 Replies
View Related
Jul 13, 2011
I just did "do-release-upgrade" from ubuntu 9.10 > 10.04 > 10.10 > 11.04 which successful but after a restart, no login console just a blinking underscore. However I still able to login to server using ssh. During the boot I saw this failure "Starting system V runlevel compatibility [fail]".
View 4 Replies
View Related
Sep 1, 2011
I am currently trying to upgrade the Apache installation on our server from v2.2.14 to v2.2.19 using:
[URL] as a guide.
Unfortunately I seem to have hit some walls. When trying to execute ./config.nice I get the following error:
./config.nice: 33: /build/buildd/apache2-2.2.14/configure: not found
Google have not yielded any results as yet. If I leave out this step and use configure, make and make install, v2.2.19 gets installed, but to a different directory and all the config will need to be reformatted as it seems it does not use the Ubuntu Apache config structure.
View 5 Replies
View Related
May 20, 2010
I've been using Ubuntu since 6.04, not a linux guru by any means but can usually get myself out of trouble.
So, the issue... I installed 8.04 on my mother's laptop some time back as she was having trouble keeping Win 2000 running (she has a low spec no-name generic laptop btw). I live in Autsralia and she in England, i thought i could better support her if she was running Ubuntu... All has been well with 8.04 but with the new LTS release (10.04) i thought i'd talk her through the upgrade... Did the online upgrade via Update Manager, all seemed to go OK but when she went to log on after restart she got an error saying 'authentication failed' even though we are 100% sure we have the user name and password correct... Tried to do a ctrl+alt+F1 to by pass the GUI log on but couldn't get the terminal session to open up, just got a black screen - no command prompt.
So... thought OK re-install... downloaded the ISO, burned and sent her a CD in the post... talked her through the re-install, all seemed to go well (again) - BUT, after restart, couldn't log in "authentication failed" again...
So, remember i'm trying to talk a novice through all this... any thoughts!?!
If i can get her to log in i can then support her via some kind of remote sesion or other screen share... and it wont cost me a small fortune in international calls!!! But if i can't get a log in, i'm dead in the water!?
View 1 Replies
View Related
Mar 31, 2011
Today I saw that there was an update available for my LAMP server that involved BIND.
So after I ran an apt-get upgrade i got the following big stack of messages ending sadly with error and I cannot upgade the of "fix" the system after that. Any Ideas? code...
View 5 Replies
View Related
Sep 21, 2010
The following is a subset of error messages I'm getting when trying to do "apt-get upgrade" or "apt-get dist-upgrade" on a machine running ubuntu server 9.10 amd64:
Code:
Preparing to replace linux-image-2.6.31-22-server 2.6.31-22.60 (using .../linux-image-2.6.31-22-server_2.6.31-22.65_amd64.deb) ...
[code]....
View 2 Replies
View Related
Jan 24, 2011
apache2: Syntax error on line 204 of /etc/apache2/apache2.conf: Syntax error on line 1 of /etc/apache2/mods-enabled/php5.load: Cannot load /usr/lib/apache2/modules/libphp5.so into server: /usr/lib/libxml2.so.2: undefined symbol: gzopen64 Have been running ubuntu server for about 6 months on a rickety but reliable AMD1.2GHz laptop (hp compaq nx9005) Had successfully deployed a UPS and various CGI scripts. Familiar with the basics of apache tomcat and even dabbled with some mods. All was running sweetly until I performed an upgraded yesterday which took me to Kernel (from uname -a) 2.6.31-22-generic-pae #70-Ubuntu SMP Thu Dec 2 00:54:52 UTC 2010 i686 GNU/Linux
During the upgrade there were libraries which apache2 depended upon and the process halted. Have brute forced some other libraries - given there were 87 packages in the upgrade and it had got to 78 - I did not dare roll back - so pursued further until I finally noticed the message above
[Code]...
View 1 Replies
View Related
Jun 27, 2011
Currently our Production Server version is Fedora8. I know its very old version, i was newly joined as server admin for this company.. my first task need to Upgrade Server with all updated packages and patches..Without production time down..because we have nearly 400 clients accessing our server.
1. Is it possible to do Without Production loss??
2. before upgrade what are the things i need to do??
3. is there any possibles the working function not working in new upgrade packages??
View 6 Replies
View Related
May 18, 2010
I had a running server (mandrake10.1) that I wanted to transfer to a better version of linux, so, I decided to install in a new hard drive the new version and adding as slave the old hard drive that it contended data files. When I finish all the installation I start to try to find the old data files but I din't find, (/dev/hdb), the hd is mounted already, but when I look inside all files are hide.
View 2 Replies
View Related
