Ubuntu Installation :: 9.10 Server Install Failed CPU Not Supported?
Feb 2, 2010Does 9.1 server require a 64 bit processor? When I try to install it I get the message."This Kernel requires an X86-64...."
View 2 Replies
ADVERTISEMENT
Server :: Install Symantec Endpoint - Error: Unpacking Of Archive Failed On File - Cpio: Mkdir Failed - No Such File Or Directory
Nov 23, 2010i am trying to install symantec endpoint on a linux server by this command rpm -ivh sav-1.0.3-8.i386.rpm but it gives me the following error error: unpacking of archive failed on file /opt/Symantec/bin/navdefutil;4ceb8d6b: cpio: mkdir failed - No such file or directory
View 3 Replies View RelatedUbuntu Installation :: Log On Failed After Upgrade/install "authentication Failed"
May 20, 2010I've been using Ubuntu since 6.04, not a linux guru by any means but can usually get myself out of trouble.
So, the issue... I installed 8.04 on my mother's laptop some time back as she was having trouble keeping Win 2000 running (she has a low spec no-name generic laptop btw). I live in Autsralia and she in England, i thought i could better support her if she was running Ubuntu... All has been well with 8.04 but with the new LTS release (10.04) i thought i'd talk her through the upgrade... Did the online upgrade via Update Manager, all seemed to go OK but when she went to log on after restart she got an error saying 'authentication failed' even though we are 100% sure we have the user name and password correct... Tried to do a ctrl+alt+F1 to by pass the GUI log on but couldn't get the terminal session to open up, just got a black screen - no command prompt.
So... thought OK re-install... downloaded the ISO, burned and sent her a CD in the post... talked her through the re-install, all seemed to go well (again) - BUT, after restart, couldn't log in "authentication failed" again...
So, remember i'm trying to talk a novice through all this... any thoughts!?!
If i can get her to log in i can then support her via some kind of remote sesion or other screen share... and it wont cost me a small fortune in international calls!!! But if i can't get a log in, i'm dead in the water!?
Ubuntu Installation :: Upgrade 10.10 Server To 11.04 Server Failed?
Apr 30, 2011I am running 2 Ubuntu servers, one as UEC frontend and the other as UEC node. I started, last night, the server upgrade on the frontend. As it promised to take several hours I left it alone to proceed through the night. This morning it was waiting on a prompt which, by virtue of hitting esc to relight the monitor, it continued upgrading packages. At some point subsequent to that it paused on a discrepancy between the eucalyptus.conf file the install wanted to save and the eucalyptus.conf file that existed. I reviewed the deltas and determined that the current, as it existed, would suffice. I received 3 more messages on the console:
Installing new version of config file /etc/init/eucalyptus-network.conf. Installing new version of config file /etc/init/eucalyptus-conf...
eucalyptus start/running process 15290
Then no further console messages nor apparent disk or cpu activity
I can shell into the machine and see the following:
Code:
root 7077 6784 0 Apr29 tty1 00:00:33 /usr/bin/python /tmp/update-manager-0r8nH5/natty --mode=server --frontend=DistUpgradeViewText
[Code]...
Server :: PHP Installation On Centos Server - Error: Mysql Configure Failed
Nov 19, 2010I tried to install php from source file on centos server and i got the error as # ./configure --with-apxs2=/usr/local/packages/apache/bin/apxs --with-mysql --prefix=/usr/local/packages/apache/php --enable-force-cgi-redirect --disable-cgi --with-zlib --with-gettext --with-gdbm
checking for specified location of the MySQL UNIX socket... no checking for MySQL UNIX socket location... /var/lib/mysql/mysql.sock checking for mysql_close in -lmysqlclient... no checking for mysql_error in -lmysqlclient... no configure: error: mysql configure failed. Please check config.log for more information.
CentOS 5 Networking :: Error "SET Failed On Device Wlan0 ; Operation Not Supported' When Configuring D-Link Wlan Card
Nov 15, 2009I have a desktop that has a d-link DWL-520 wireless card, which was working under Windoze. Today I installed Centos 5.4 on the system , which went cleanly. I then used Network Configuration to set up the wireless card. I specified to use DHCP, set the SSID and authentication password. When I tried to activate the card I get these error messages
Error for wireless request "Set Mode" (8B06): SET failed on device wlan0 ; Operation not supported. Error for wireless request "Set Encode" (8B2A): SET failed on device wlan0 ; Invalid argument. Error for wireless request "Set Encode" (8B2A): SET failed on device wlan0 ; Invalid argument. Determining IP information for wlan0.
The hardware manager seems to have correctly identified the card and chipset, (Intersil Prism 2.5) and installed driver hostap_pci which came with the distro. This web site seems to suggest that this is the correct driver: [URL] searching forums I've found a few references to these errors, but they were from several years ago, and for different distros and cards. I did find a reference to using Network Manager to configure the card instead of Network Configuration. I started the NM service and configured a connection using it instead, but still no luck.
[Code]....
Ubuntu Installation :: Installation Of Peazip Failed - Now Can't Install Anything
Nov 11, 2010I was trying to install a RAR extractor called Peazip (http://peazip.sourceforge.net/) I selected the 64-bit package (I run Lucid) and went for it. Everything extracted ok, and the package met all requirements. However, during the installation process, it hung. No movement. I closed out of the installation, and restarted, to attempt a second try.
Now, when I try to install anything:
Code:
(Only been running this OS for, oh, what, a week? And I already hosed it up! )
Ubuntu Installation :: Install Of 32 Bit 10.04 Failed
Jun 5, 2010I tried installing the 32 bit version of ubuntu 10.04 on his machine. I gave him 5 gigs of swap and 3 gigs in boot. It worked fine for two days and on the third day he tried to boot up his machine and got the message "primary drive 1 not found, secondary drive 1 not found" and the boot loader never appeared. He waited for a while and eventually the ubuntu splash screen appeared with five red dots, and after a moment of that the screen went totally dark. After "a very long time" (in his words) the desktop appeared but his desktop toolbars never appeared. The one folder on his desktop did appear. He "couldn't do anything" and eventually shut it down.
View 2 Replies View RelatedFedora :: Gedit Root Error "Failed To Connect To The Session Manager: None Of The Authentication Protocols Specified Are Supported"
Jan 1, 2011Whenever I try to open a file using gedit as a super user in fedora 14, i get the following error (gedit:2975): EggSMClient-WARNING **: Failed to connect to the session manager: None of the authentication protocols specified are supported ** GLib-GIO:ERROR:gdbusconnection.c:2270:initable_init: assertion failed: (connection->initialization_error == NULL) Aborted (core dumped) I've googled the problem, but nowhere comprehensive solution is said to be found.
View 2 Replies View RelatedServer :: Drbd Failed To Install In Debian Lenny
Apr 21, 2010i tried installing the drbd for replication of data.. i found some tutorials but when i tried installing it i spits out an error of
Code:
E: Package drbd8-module-source has no installation candidate this is what i use to install it
Code:
apt-get install drbd8-utils drbd8-module-source drbd8-source build-essential
Ubuntu Installation :: Server Startup Failed: Error During Bootstrapping?
Mar 4, 2010I realize this probably isn't the best place to be posting this as it relates to project open, but they don't have a forum.
We recently upgraded our Ubuntu server and now when trying to use project open we get the follow error message, does anyone know why this may be, or have any guesses as to why this may be.
Server startup failed: Error during bootstrapping
No fullquery for dbqd.acs-tcl.tcl.apm-procs.apm_package_installed_p_not_cached.apm_packa ge_installed_p and default SQL empty - query for statement missig while executing
"error "No fullquery for $statement_name and default SQL empty - query for statement missing""
(procedure "db_qd_replace_sql" line 10)
code....
Ubuntu Installation :: 9.10 Server - Load Installer Components From CD Failed
Mar 6, 2010I recently brought home an old Compaq server from work. I was told that it works fine. When I brought it home, I tried installing Ubuntu 9.10 server from a cd. While it's trying to install, I get the message "Installation step failed. An installation step failed. You can try to run the following item again from the menu, or skip it and choose something else. The failing step is: Load installer components from CD." I turned off the computer and tried it again several times. Each time the same message appears.
View 5 Replies View RelatedUbuntu Installation :: 9.10 Failed After Install / Solution For This?
Feb 14, 2010I have repeatedly installed from CD & each time after reboot, I get an error..
afbe47d-19bo-416f-adaa-d1b1255ecfaa
I do not have knowledge of ubuntu Nvidia drivers etc. because my previous installations (ie. 9.04) worked OK. I do not have a dual boot HDD, just a clean install.
By the way, I can upgrade from 9.04 to 9.10 using the add/remove thing & everything works.
Ubuntu Installation :: 10.4 Failed On Install And Noe Will Not Open?
Apr 30, 2010I installed 9.10 on a Vista 64-bit PC with AMD64 dual core. I have 3 hard drives. 1 x partitioned in to 2 for Vista and its appluications on the other partition. I have another hard drive partitioned with one for documents and the other for Ubuntu OS. The 3rd hard drive was for future backup....
I started to install Ubuntu 10.4 with the Update Manager. It got to the stage where it had just finished downloading the new files.when suddenly, I assume as it started the install, all hell broke loose and it crashed. At first I could restart the machine and could see I had lost system info: there were no "SHUT DOWN", "Network" and other buttons and notifcation tablets on the ribbon. The Update Manage was missing bits too.
It did suggest "re try" but that would not work. I then tried Symnaptics and did a "fix broken items". It found over 90, but could not install them. Then it stopped working all together. I can not gain access. It did break Vista too but I managed to get that up and running again, but I have files on the desktop, the Evolution eMail has vast amounts of stuff and I would like to keep the settings in Firefox.. I have tried using the 9.10 CD to fix but if I go in as "trial" and use the update manager or Synaptics it can not complete the install, it says out of memory.
I am happy to reload the OS, either one, but how do I do it without destroying my valuable data..I have two machines I have been working on and neither have worked! See other thread.
Installation :: Failed To Install Ubuntu 10.10 / Sort It?
Oct 12, 2010I downloaded and burned the iso at 12x speed and configured the BIOS so that the computer would boot from a CD. I ran the Live CD and everything seemed to be fine until i was informed that the installation had failed because of problems with my hard drive. But worst was to come when i reconfigured the BIOS so as to boot from the hard drive and all i got was a completely blank screen. I don't have a Ubuntu 10.04 Live cd handy so i have to use a different distro's live cd just to get on line.
View 9 Replies View RelatedUbuntu Installation :: Install 11.04 - Failed To Boot From USB ?
Aug 6, 2011I downloaded the 32-bit iso from the Ubuntu website. I followed all of the instruction given on [url]. I went into my BIOS settings and set it to boot from the USB. A black screen came up and first showed me a line of copyright information. On the next line it said "Boot failed: please change disks and press a key to continue". Then on the third line it repeated the same thing "Boot failed: please change disks and press a key to continue".
I'm using a Dell Latitude D610 laptop with Windows XP Media Center Edition Version 2002 Service Pack 2. The USB I'm using is eight gigabytes, was manufactured by Toshiba, and has absolutely nothing on it except for the stuff that needs to be on there to install Ubuntu.
Ubuntu Installation :: Grub Failed On Install - Now No Boot Up Into Any OS
Feb 1, 2010I cannot boot into either OS. Grub failed on install. How to boot back in to windows. From live Ubuntu CD I can see that all files are there, however it shows the disk to be unrecognized and unallocated. There is an X by the root folder of my C; drive. Windows recovery console can't fix it, windows install can't fix it, and windows repair can't fix it. I guess I need to reconfigure my boot drive properties to recognize the ntfs; I don't know what to do. I would like to boot back in to windows partition the drive correctly and start over , is this possible?
View 1 Replies View RelatedUbuntu Installation :: Grub2 And Initrd Failed To Install
May 17, 2010I just did a new install of Ubuntu 10.04 (64 bit) on a system with multiple older versions of Ubuntu already installed. There was a dpkg error during the install with no useful information provided, otherwise the install completed normally. When I rebooted, the old grub2 ran and presented my old boot menu. When I mounted the 10.04 partition to see what was there, I found that /boot/grub/ was empty and /boot/initrd.img was missing. The other boot files were present.
View 2 Replies View RelatedUbuntu Installation :: Failed To Install Key Applications / Files
Jun 14, 2010I have installed Lucid 10.04 server on an IBM eserver 325 dual boot with 2003. the cd rom drive on the server is starting to go out and the install worked but failed to install key applications and files. For examle- no VIM (just VI) and the apt sources.list file had one entry- the cd rom. I need to update all the packages necessary for the system to operate fully. ( I have tons of broken dependencies when trying to install SSHserver, Samba and other apps) I manually entered the muliverse and universe repositories in sources.list but this is not resolving the issues with the missing dependencies. I can get a new cd-rom drive but it will certainly take a week or two to get and I need to get this project going. I have some experience with Linux, but not enough to know if there is a magic command that I don't know.
View 2 Replies View RelatedUbuntu Installation :: 10.04 Installer Failed To Install On HDD With Four Partitions
Jul 2, 2010HDD with four partitions: Three DOS bootable primary partitions are located in the head, and the residual extended partition is divided into several logical drives.
1st trial: 10.04 installer recognized the last largest logical drive for system installation, but installer truncated the extended partition, and created the "terrible" 5th primary partition at the end of the HDD. GParted and other utilities cannot access to this 5th primary partition. (So, I restored the lost partition table on the HDD manually by MBM. But several OS were broken.)
2nd trial: To avoid making this "terrible" 5th primary partition, I located the largest logical drive for installation at not of the end.10.04 installer recognized this logical drive, but failed again.I tried GParted. but also failed to formating to ext4.Maybe, 10.04 installer failed at this formating step. Logical drives are not supported in 10.04 ?
Ubuntu Installation :: Fm20 Install Failed With Winetricks / Fix It?
Aug 10, 2010I'm trying to run (INVedit, for the Minecraft Alpha) needs fm20 installed to work. So going through the winetricks motions, I have it run, but the install program says "Microsoft ActiveX Control Pad Setup was not completed successfully."
However, this is the output from "sh winetricks fm20" code...
Ubuntu Installation :: Getting Failed I / O Error Message On 10.04 Install
Sep 6, 201010.04 new isnstall from cd goes for a minute then I get this error message:
old p3 800 machine, will this distro work on an old machine like this:
BusyBox v1.13.3(Ubuntu 1:1.113.3-1ubuntu11) built-in shell(ash)
Enter "help for a list of built-in commands.
(initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: input/o-put error
Cannot mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs
(initramfs)
Ubuntu Installation :: Upgrade To 9.10: Failed To Install Kernel?
Sep 9, 2010I have a Dell Vostro v13 laptop that was shipped with 9.04. I upgraded to 9.10 and it told me it could not upgrade the kernel. The error message said something about a problem with the kernel file. I can still run the system and have not rebooted since the upgrade, but I need to be able to reboot eventually.
The System Monitor says:
Release 9.10 (karmic)
Kernel Linux 2.6.28-19-generic
Everything I have read says that 9.10 includes kernel 2.6.31. So I am afraid to reboot now.
Ubuntu Installation :: Failed To Install File Packages
Jan 24, 2011I get a box from update manager listing all the updates that it think I should download. I try to, and I just get this message afterwards, "Failed to fetch [URL] Hash Sum mismatch". Any solutions?
Edit- I'm running on Ubuntu 10.10 if that's any help.
Ubuntu Installation :: Failed To Unmount Partitions - Install From Iso?
Feb 9, 2011I am attempting to install 10.10 from the iso because I have no working cdrom. I uncompressed the .iso to a ext3 partitions and put the correct entries in the menu.lst file. It starts ok. The problem occurs when I attempt to install to the hard drive. At a point I get the error,
Failed to unmount partitions The installer needs to commit changes to the partition tables, but cannot do so because partitions on the following mount points could not be unmounted./cdrom I have a choice of continue or go back. If I continue the install hangs. If I go back I cannot continue. How do I fix this problem?
Ubuntu Installation :: Failed To Install Bootloade. Using USB Creator?
Mar 10, 2011why when using usb creator I may be getting a Failed to install Bootloader error??
I have the .ISO selected in the top pane, 8GB usb drive path in the lower pane.
I'm going this route because my mb isn't recognizing the CD's autorun.inf.
Ubuntu Installation :: Grub Failed To Install After Upgrade?
May 7, 2011I started the upgrade and the system is nearly completed but I there is a problem with GRUB.Most likely since I am dual boot with win7. So right now I have a pop-up message that says...GRUB failed to install to the following devices:/dev/sdbDo you want to continue anyway? ect ect ect...I have not rebooted and completed the installation yet as I figure its probably easier to fix this now while I have the full system up and running vs having to fix it via live cd.
View 8 Replies View RelatedUbuntu Installation :: Executing 'grub-install /dev/sda' Failed
May 20, 2011I've been trying to install Natty (64) over the last couple of weeks and am having problems that I've never had with any distribution before. At the end of each install, I get the following error:
Code:
Executing 'grub-install /dev/sda' failed
It then gives me the option of installing grub somewhere else, which I don't want, but it doesn't work anyway, or leaving without a boot loader, which isn't really desirable.
At first I thought it might be something to do with my previously complicated quad-boot partition layout, so I simplified that to a fairly regular Windows and Ubuntu only, but no luck.
Grub also fails when attempting to upgrade 10.10.
I've tried restoring Grub2 using chroot amongst other things which doesn't work.
Ubuntu Installation :: Cannot Install Updates - Failed To Fetch
Jun 1, 2011I'm unable to install updates and new packages. I receive messages such as the following:
W: Failed to fetch [URL] 404 Not Found [IP: 91.189.92.161 80]
W: Failed to fetch [URL] 404 Not Found [IP: 91.189.92.161 80]
W: Failed to fetch [URL] 404 Not Found [IP: 91.189.92.161 80]
I recently had windows vista taken off my hard drive and my partitions realigned to create more storage space on my hard drive. I don't now if this is related. I was able to install upgrades previously.
Ubuntu Installation :: Lucid Install From Disc Failed?
Jun 16, 2011I want to reinstall lucid for various reasons, so I downloaded the file, burnt it to cd and then booted with the cd in. An ubuntu screen started then went to a black screen with the message:(initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: input/output errorCan not mount /dev/loop0(1cdrom/casper/filesystem.squashfs) on //filesystem.squashfsthen no further progress.
View 5 Replies View Related