I just did "do-release-upgrade" from ubuntu 9.10 > 10.04 > 10.10 > 11.04 which successful but after a restart, no login console just a blinking underscore. However I still able to login to server using ssh. During the boot I saw this failure "Starting system V runlevel compatibility [fail]".
View 4 RepliesI am not able to login to server from console attached to server, every time i enter username & password but it again asks for username & password. But when i try to login to server from remote machine, login happens properly.
View 4 Replies View RelatedI don't what happened but yesterday I was working normally and then I shutdown the computer, today when I opened ubuntu it took me to tyy1 login screen, I entered my username and password then it took me to the normal login screen with the login drums sound and it wrote on my account (logged in) so I clicked it and I entered my password again and then I got to my ubuntu so what went wrong and how to fix it also I noticed that a new terminal in system tools occurred called Kernel (I didn't add it)
I'm using ubuntu 10.10 on Dell inspiron 1520 with Nvidia 8600GT and 3GB RAM
Important: this happened after update to generic-headers-24
After the Upgrade of my Fedora Insatallation (FC 10 => 12) I have some problems with Gnome and the Login via console. The system actually boots fine and all kind of services like Postfix, IMAP, Samba, SSHD, Apache, etc. are avialable normally.
If I try however to work directly on the server I only see the completed Fedora progress icon and not as hoped for, the Login to Gnome. Also the attempt to change to a plain console with ALT-CTRL-F1 fails.
Since actually everything seems to work quite fine, I am somewhat helpless, according to should I look for, to get Gnome and the Console Login working again.
I got two computers with the exact same symptoms today: Both seem to be alive. They answer pings and they host virtual machines which are working. However, I cannot login via SSH. I get
$ ssh -v obelix
OpenSSH_5.3p1 Debian-3ubuntu6, OpenSSL 0.9.8k 25 Mar 2009
debug1: Reading configuration data /home/mike/.ssh/config
debug1: Applying options for obelix
[code]....
On the console I can switch the ttys and enter my login credentials. After that I see the GNU/Debian Linux welcome message an no prompt. The system seems to hang. I'm able to switch the tty again and login with the same result. (I tried that three times now and I start running out of ttys.) A search on the Internet suggested some ressoucre shortage. How could I release some resoucres than? How could I further investigate the situation before just trying a hard power off?
I know there are ways to change the login of a linux box (runlevel 3) so that you don't see the regular login prompt but that you get a list with options. You see this with appliances.
My goal is to create a login like some of those appliances have. Instead of just getting a login prompt you can select several options like login, change network configuration, change password, stuff like that. How can I do this? Is there an Open Source tool to configure this?
The author (somewhere on these Ubuntu forums directed........ Ctrl + Alt + F1 which I thought was going to be the "Terminal" but nothing similar. I have about a half dozen different names/passwords for Ubuntu but none will work to log in. How to get out of this text console and back to Ubuntu GUI? And, how to read my lost LogIn name and password for this "Text Console"?
View 2 Replies View RelatedI tried most methods suggested on many sites to install drivers
## through the additional driver panel only
## through the Nvidia.run file I downloaded
## through the terminal using apt-get
All failed to start ubuntu gui it takes me to the console login and I noticed it says "saned disabled" edit /etc/..something. This problem made me install ubuntu again three times and every time I activate the driver then install the driver Nvidia.run or through apt-get and both leads to a black screen tty1 login. So what to do now I installed and removed many things and I won't reinstall ubuntu again. Also I typed compiz and this came on:
root@ubuntu:/home/sherbieny# compiz
Xlib: extension "GLX" missing on display ":1.0".
compiz (core) - Fatal: Root visual is not a GL visual
compiz (core) - Error: Failed to manage screen: 0
compiz (core) - Fatal: No manageable screens found on display :1.0
Launching fallback window manager. I want to install properly so that I can start normally and enable the extra visual effects and the custom effects. Please elaborate the steps clearly
New Info:
When I enter nvidia-settings : server X opens and says
You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run 'nvidia-xconfig' as root), and restart the X server. When I enter nvidia-xconfig as root and restart nothing happens and when I enter:
nvidia-detector it says none
and when I enter: nvidia-smi
Error: API mismatch: the NVIDIA kernel module has version 260.19.21, but this NVIDIA driver component has version 260.19.29. Please make sure that the kernel module and all NVIDIA driver components have the same version.
Failed to allocate an RM client
Could not allocate resources!
root@ubuntu:/home/sherbieny# apt-get update kernel
E: The update command takes no arguments
A new and very exciting error everyone now also the windows 7 that I have besides linux has also crashed and cannot open the login window. I don't know whats happening all I know is that few hours ago I logged in to windows normally now I cannot login to either one of them and the funny part is: I'm working on my thesis on this computer and I cannot work anymore and I'm supposed to meet with the professor on monday.
I just installed 10.04, and its taking me to the console login, rather than the graphical login. When I tried the live cd, the graphical environment was good. But after installation, I dont get the graphical login , so that I can get into the desktop.
I have a ATI Mobility Radeon X1400 card on ThinkPad T60. Everything was working on 8.10, and I decided to install 10.04 and now it doesnt work.
After upgrading Ubuntu to version 11, vmware-server-console stopped working - only gray window opens. After killing the process error message appears:
/usr/lib/vmware-server-console/bin/vmware-server-console: symbol lookup error: /usr/lib/i386-linux-gnu/libgio-2.0.so.0: undefined symbol: g_cclosure_marshal_VOID__VARIANT
I've just ran the upgrade from 9.10 to 10.04 via the online update manager. It rebooted and now hangs at the text screen before any graphical login screen appears. The last line on screen appears to show a failure to connect to a cifs share on my other windows computer.
I've tried to select the recovery menu, which then appears but the keyboard does not allow any of the options to be selected with the arrow keys or any other I tried, I've tried a ps2 keyboard and that doesn't allow any selections either. But it is possible to use ctrl-alt-del to reboot from this non responsive menu.
i've created a completely new user, so config files for fluxbox/unity/gnome cannot be the problem. when i try to login with this user in gdm, the screen goes black for a few seconds and gdm displays again.
tried:
- new user without any gnome/unity/fluxbox config
- tried "ubuntu", "ubuntu-classic", "ubuntu-classic without effects", and "ubuntu-classic safe mode"
- did aptitude purge gdm & installed it again
- nvidia module is loaded properly
- no errors in /var/log/Xorg.0.log
- login with NXCLIENT on this server works perfectly fine
[Code]....
I am using rhel 5.3. I am using windows 2003 server 32-bit (the processor is 64 bit. AMD athlon x2). I have installed vmware and installed rhel5.3 64 bit on top of it. Now i am able to login as root from GUI mode (f7 console), but unable to login in text console from f1 to f6. I checked the /etc/securetty. But there was nothing unusual there. I think udev is causing this problem, since google said so. I cant find where the udev.rules file is located that google searches are taking about. How do i enable root login in f1-6 console.
View 4 Replies View RelatedI just upgraded to 10.04 from 9.04 and I cannot log in to the machine. I tried launching the on-screen keyboard but it just flashes and disappears. Anyone else having this issue?I also tried attaching a different USB keyboard, but that didn't work either.
View 9 Replies View RelatedI upgrade my system from 9.04 to 10.04, then when booting, I get the purple wallpaper and mouse, but nothing else, No login menu. I can hopefully connect to my system with ssh from another machine, I update everything, upgrade, etc etc, try to boot on recovery mode, and clean packages and so one...Nothing happens, still no login menu.
View 8 Replies View RelatedRecently I decided to upgrade my 10.04 installation the lazy way, by clicking the upgrade button instead of a clean install (32bit). Now, I can only get into Ubuntu with the recovery mode. If I let the system boot the normal way, I end up at the login screen where I (correctly) enter my password and then nothing else happens. I can move the mouse, the clock ticks on, and I can even use the restart button, etc. But the login screen stays gray and does nothing else, so no desktop. With recovery-mode I can use the failsafeX option to get into the desktop, everything works fine there. And even though it calls it a low-graphics environment or so, everything looks normal, its even my native resolution of 1440x900.
My first idea was some driver issue for my Ati Radeon HD 2600 Mobility card, so I looked into that. I've checked/done the following:
- Installed the drivers manually (downloaded from AMD)
- Uninstalled those drivers
- Used aptitude to remove any fglrx things
- Installed Jockey
- Installed the drivers with Jockey
- Removed the drivers with Jockey (Ive read this is the cleanest option)
- "no drivers" at this point
- Use generic/default X config, make specific X config (both from the failsafe X boot thing)
Nothing worked at all, booting still only works with recovery option and then the low graphics mode. Otherwise, it will just "hang" on the login part. When I boot first recovery mode, and then pick the resume option, I'll see some errors near the end of the booting process.
I've seen 2 errors which might be related to my issue:
- "Unable to allocate crypto cipher with name [ecb(aes)]" (home is encrypted, and accessible with safe boot)
- BUG: CPU#1 stuck for 61s!
Now, the second error seems to "match" with hanging at login. I login, something is stuck and churns the CPU... and never gets unstuck, so login just hangs there. However, I can't find any information related to that stuck CPU thing. Only changing PIDs and other numbers/stack traces, no processname or any other name to work with. So I'm at a loss here.
Big dump of possibly interesting part of kern.log:
Code:
Nov 26 20:31:25 lexmortis-laptop kernel: [44.572381] BUG: unable to handle kernel NULL pointer dereference at 00000021
Nov 26 20:31:25 lexmortis-laptop kernel: [44.572386] IP: [<c027c1b0>] sysfs_delete_link+0x30/0x70
Nov 26 20:31:25 lexmortis-laptop kernel: [44.572397] *pdpt = 0000000035f29001 *pde = 0000000000000000 .....
Despite that with low graphics mode everything works, it seems to be a non-graphical issue here (stuck CPU on some process?). Unless I missed another option I can test for the graphics / drivers. ow I could find more info on stuck CPUs during boot?
I just finished the upgrade of 10.10 to 11.04, restarted and now i can't login anymore, i'm stuck in an endless login loop.
1) Boot
2) Xorg starts
3) I see my user, login
4) Screen goes black like it's loading
5) Loop back to login
It's not a password issue, i can login in command line It's not a profile issue cause i tried creating a new user from the command line and it still loops. I looks briefly at the /var/log/... but i couldn't find anything relevant,respond ASAP this is my work PC.
I thought it would be simple since it's a very simple a relatively new machine (2months ago)
Right after I type in my username and password and hear the usual login sound I have to wait about 15 to 20 seconds to get the X desktop. The system load average monitor is at its max and starts to become lower.If I log out and in again I dont get that delay. It only happens with logging in after a reboot/power on.I tried to open a console (Ctrl+Alt+F1) before I log in, move back to X and login then jump to console and use htop to see what's eating up my resources during that time with no luck. Everything seems to be normal.
View 3 Replies View RelatedI had a working workstation with Karmic. Then I decided to upgrade to Lucid. Bad move, it turns out.First the upgrade crashed. Just stopped doing something for hours on end, and I eventually had to reboot. After that, I had to apply lots of apt-get and dpkg love to get the machine to book. Now, I *think* I have a Lucid system, at last. Only that it doesn't work where the Karmic system used to...Our setup uses kerberos and autofs. To begin with, the upgrade lost my /etc/krb5.keytab (making it impossible to log in), but that can be easily replaced.Now, I can log in, but my home directory doesn't get mounted. In /var/log/auth.log, I get this:
Code:
Jun 23 11:13:58 pc13477 gdm-session-worker[1801]: pam_krb5(gdm:auth): pam_sm_authenticate: entry (0x0)
Jun 23 11:13:58 pc13477 gdm-session-worker[1801]: pam_krb5(gdm:auth): (user hans) attempting authentication
[code]....
I did an upgrade on my system yesterday. After the completion of the upgrade on restarting the system the computer enters tty1 mode straight without giving me the GUI login screen making it difficult for me to work. The question does now is what could have caused this to happen ? Have i gottten something wrong somewhere?
To switch to tty7 mode i hit the key crtl+alt+7 but it gives an error message about an unknown user even after login in with my username and password on tty1. Start the computer on recovery mode and selected the option correcting broken packages and it produced a result requiring me to download some new packages. I have a huawei e1550 modem which i use to browse in Nigeria. I want to know how i can connect to the internet on the tty1 after insertion of the modem so i can download the necessary packages it requested on issuing dpkg command
Today I was prompted to upgrade to Ubuntu 9.1, and then again to 10.04
Doing these upgrades wreaked havoc on my system. I have been able to fix most of the problems that were caused but I am having trouble finding information on the following:
When I boot up the system and after passing the GRUB loader, the system freezes up at the login screen and I have to power down.
If I hit ESC at the GRUB screen and choose Kernel 2.6.32-25-generic (recovery mode) and then choose "failsafe graphic mode", then I am able to log in to GNOME as normal.
I have dell d630- 64bit version So i upgraded to the latest alpha and my system gets stuck at: as far as "Checking battery state" and hangs, i can login to the separate console and run startx but then no window manager is comming up so again, another ubuntu upgrade and another failure
View 2 Replies View RelatedI just upgraded from 9.10 to 10.04 beta and now I get the login screen - but after logging in, all I get is a blank screen with a black bar on top showing just the time on the top right hand corner. If I CTRL+ALT+F1 and reboot using the command line, it restarts showing mythbuntu on shutdown. Im have nVidia GEForce 8600 - is this due the X crashing? I tried all these - no change
Code:
sudo dpkg --configure -a
sudo apt-get install --reinstall ubuntu-desktop
sudo apt-get install -f
I have a problem to login with the root user from gui (I use Gnome). The root password is ok. Is there a way for me to logon with the user root in gnome?
View 1 Replies View RelatedAbout a week ago I used preupgrade to make the transition F14 -> F15 on a x86_64 workstation.
The system has been fully updated ever since, but I'm still not able to login either with KDE or Gnome. With KDE, the login process freezes before completion, whereas with Gnome I get the "wallpaper" behaviour reported here: [URL]
Funny though, I can login in the KDE failsafe session.
I could find no other thread reporting this problem and am at a loss on how to start diagnosing the problem. If anyone out there has any suggestion, I'd welcome it...
what's the difference between a "regular" KDE session and the failsafe one? They both look & feel the same to me...
I"ve started using Ubuntu 11.04 with my Intel iMac. Today I was playing EDuke32 on Ubuntu then the game got freezed, so I tried Ctrl+Alt+F1 and it worked. I just logged in the console and typed;
sudo reboot
This actually didn't work, so;
/usr/bin/sudo /sbin/reboot
This worked.
After rebooting, I tried log in with the GUI login screen. However I just cannot login. After I input my password and press enter, login screen goes black out and comes back to the login screen. I also tried to log in from console (Ctrl+Alt+F1), and it worked. I can log in.
I am using kubuntu 10.04..i am a new guy here..
i unfortunately removed all my files from /home folder..
rm -rf ~ /. picasa / (ya..i know..)
As some of the files were really important i tried recovering data using foremost..i used the command
foremost -i /dev/sda1 -o /mnt/foremost
After execution of this command it prompted a process..it was downloading something..and i left the computer for an hour or so..when i return there was nothing on screen..so i reloaded the system..And after that when i try to login i get the error
"xsession: warning: unable to write to /tmp; xsession may exit with an error"..so when i googled for it i found its because there is no memmory in my /root ..so i tried login via console (tried ctrl+alt+f1..after the login screen appears..when i type ctrl+alt+f1 i get a black screen)..but nothings happening...
but the problem is when i type (ctrl+alt+f1) i am getting a black screen only...and just a cursor blinking..nothing else..ctrl+alt+f1-f6 give me the same result..and when i try (ctrl+alt+f7) it goes back to the screen with the error....how can i login to console now...
Just before Lucid was released, I installed karmic on a vanilla VM in 64-bit mode, and all was good. Did a desktop setup and afterwards installed Eclipse, and I was happy: A new system for coding on-the-go! Now, after upgrading to Lucid with do-release-upgrade -d, I can no longer enter my password on X login. The keyboard just doesn't work for some reason. When I enable the onscreen keyboard, and click my password, I can login. The strange thing is that my keyboard works like a charm after I've logged into my X session?
View 7 Replies View RelatedI upgraded to fedora 10 using yum but i have a problem, the installation went fine and after rebooting i got a login screen. I typed in my user name and password and after a second it returns to the login screen. Im sure the username and password are correct. If i type in another password i get an error message. So how can i log in?
This is what i did to upgrade to Fc10:
Code:
Then i got an upgrade wizzard and selected Fedora 10 and than reboot.
In the grub menu only one kernel is present which is the Fc10 so couldn't use the old one.
I've tried to edit the kernel with single for single user that works gives me a command line but im just not experienced enough to figure out how i can use the command line to login.
My system is Dell 4300S with 1.4 GHz Pentium processor, recently upgraded to 1 GB RAM,120 GB WDC1200JB hard drive Sony DRU-720A DVD/RW drive, ATT plugandshare wireless adapter with Atheros AR5001X chip, ATI Rage 128 Pro Ultra TF video card, and Actiontec V90, and 56KFlex modem (Agere System Venus). I attempted to use preupgrade to upgrade from Fedora 12 to 14 using wireless connection. It seems, that upgrade finished successfully, except I am not unable to get to a GDM login. I updated SElinux to selinux-policy-3.9.7-10 and selinux-policy-targeted-3.9.7-10, and touch /.autorelabel overnight, I was able to login using GDM once. And that is all. After I boot, after Ctrl+Alt+F4, I can login to terminal.
[Code].....