Recently i upgraded my laptop from ubuntu 9.10 to 10.04 but alas! after the upgrade i don't get anything, just the 10.04 boot up screen and my cursor after some time. when i run it in recovery mode and tried to startx from there , it gave me a message " no protocol defined " now i can only access my system in failsafe x mod. code...
View 2 RepliesI have dell d630- 64bit version So i upgraded to the latest alpha and my system gets stuck at: as far as "Checking battery state" and hangs, i can login to the separate console and run startx but then no window manager is comming up so again, another ubuntu upgrade and another failure
View 2 Replies View RelatedAfter upgrading Ubuntu to version 11, vmware-server-console stopped working - only gray window opens. After killing the process error message appears:
/usr/lib/vmware-server-console/bin/vmware-server-console: symbol lookup error: /usr/lib/i386-linux-gnu/libgio-2.0.so.0: undefined symbol: g_cclosure_marshal_VOID__VARIANT
I have had Ubuntu desktop on my PC for a year now and am very happy with it. A couple of months ago I got a Ubuntu server 10.04 for playing about with. I have installed the gui, for personal reasons, but I want to upgrade to 10.10
Whenever I attempt the upgrade my server becomes unbootable and I have to reimage and start again. I have even tried performing the upgrade before I install the GUI but it still makes no difference.
Although I have the GUI I am doing the upgrade via command line.
Upon watching the upgrade in process, I find that no errors are occurring. Could it be something to do with my server provider?
Server Specs are: Specification: Intel Dual Core, 2.2 GHz 800MHz FSB, 2MB L2 Cache, 2Gb DDR, 1x 250Gb HDD
I just upgraded from 9.10 to 10.04. While it seemed to go fine, GDM won't start. (Instead the Plymouth bootloader just displays the splash screen continuously.) I can get in through a virtual terminal, but starting GDM via the init script does not do anything. I also tried this:
Code:
me@host:~$ sudo gdm
**
ERROR:gdm-settings-direct.c:157:gdm_settings_direct_get_boolean: assertion failed: (entry != NULL)
Aborted
I tried running sudo dpkg-reconfigure gdm, but this did not change anything. Logged in from the virtual terminal I can run startx and get the desktop, but obviously I would like to have the login manager working.
I recently updated to Ubuntu 10.04. On this same machine I've used Ubuntu for 3 or 4 years now. Upgrading from 8 - 9 - 10. I love Ubuntu and use it as my everyday work environment. Anyway, recently when I start my machine in the morning it boots to commandline instead of the desktop. For the last couple days I boot to safe-mode and do a package repair. Sometimes more than once. Eventually I get the desktop to start but it is annoying. When trying to boot to Fail Safe Graphics Mode(?) I get an error stating: "Fatal Server Error: No Screens." The message referred me to /var/log/Xorg/failsafe.log. Here is a snippet of the end of that log file:
[code]...
Also, I'm using an NVidia graphics card on an HP machine. I installed the "current version" accelerated graphics driver which it says is proprietary.
I'm configuring a new Centos 5.5 server in replacement of an old W2K server.The topology of our network is simple : one file/dhcp/dns relay server and workstations (PC's and some MAC's) plus network printers and scanners.All the workstations have dynamic IP addresses (easier because a lot of 'dynamic' changes : new persons with their own laptop, ...) and the server and printers/scanners have fixed IP addresses.I edited the dhcpd.conf (see here underneath), I have the file dhcpd.leases but it doesn't start !
DHCPD.CONF
ddns-update-style interim;
ignore client-updates;
[code].....
digikam doesn't start ~/.kde4 has been reset tried to copy ~/.kde4previous/*/*digikam* to .kde4 related paths running from console: riccardo@homeSUSE:~> digikam digikam: symbol lookup error: /usr/lib64/libdigikamcore.so.1: undefined symbol: _ZN6Marble12MarbleWidget11changeEventEP6QEvent
View 9 Replies View RelatedI'm trying to move a mysql 5.1.50-community InnoDB database from one location to another.When starting the service I get:Starting MySQL.Manager of pid-file quit without updating file [FAILED]I've searched for a way to do this but I can only find people who describe what I've just done.
View 6 Replies View RelatedI have an old computer (Pentium 4) without a monitor. To make the most of it I installed Ubuntu server on it and have been using it for almost a year. A couple of months ago I don't really recall what I did but since then it doesn't start-up unless a monitor was plugged in.
I've tried pinging it but it doesn't respond when no monitor is plugged in. meaning it's not even booting correctly.
I'd like to know what the problem is and how to fix it. And I'd really appreciate any help in diagnosing the problem. I just don't know where to start.
I installed wamp server and it doesn't start. port 80 test successfully,
View 1 Replies View RelatedSince upgrading from Wheezy to Jessie I have not been able to start the MySQL-server. When I do a "systemctl start mysql" I get the following answer on the console:
Job for mysql.service failed. See 'systemctl status mysql.service' and 'journalctl -xn' for details.
Entering 'systemctl status mysql.service' the answer is:
● mysql.service - LSB: Start and stop the mysql database server daemon
Loaded: loaded (/etc/init.d/mysql)
Active: failed (Result: exit-code) since Don 2015-06-18 18:35:41 CEST; 4min 1s ago
Process: 11272 ExecStart=/etc/init.d/mysql start (code=exited, status=1/FAILURE)
syslog and hostname.err don't show any pertinent messages.
I need help adding a nohup command in this command line: su - rhx12 -c "/rhythx/rhythx/bin start /rhythx/rhyth" When I execute the script using root on the command line it works fine. But, when I reboot the server the process doesn't start. This script will go into the etc/init.d and rc2.d directory.
#!/bin/bash
case $i in
start)
su - rhx12 -c "/rhythx/rhythx/bin start /rhythx/rhythx"
;;
[Code]...
After I finished upgrading Xubuntu from 9.10 to 10.04, I discovered that my keyboard stopped working in X Server. The upgrade process was running smoothly until the last moment, when it produced some error, which I, unfortunately, did not write down. Anyway, the upgrade has completed; uname shows kernel version 2.6.32-31. Now the keyboard works fine if I select a recovery mode at startup, but if I type 'start gdm' from the shell or select the default option in GRUB while booting, the keyboard becomes unavailable right from the login screen. I can log on using the virtual keyboard, but that's all I can do; the keyboard is still dead.
View 5 Replies View RelatedI performed a system update yesterday to CentOS version 5.4. Now I cannot get vmware to start. I get the error "VMware Server is installed, but it has not been (correctly) configured for the running kernel. To (re-)configure it, invoke the following command: /usr/bin/vmware-config.pl." I tried running vmware-config but that did not resolve the issue. I saw the bug related to 2.0.x (after the update), but that does not seem to apply to 1.0.9.
View 7 Replies View RelatedAfter upgrade to Ubuntu 10.04 I realized that Firefox doesn't start, it just shows "Firefox starting"on the taskbar for a second and then dissapear. New Gwibber software doesn't start either.I have separate /home partion and installed new version to the system partition marked it to be formatted first. Opera browser works perfectly fine.
View 1 Replies View RelatedSince I noticed a new version of Ubuntu (10) was out and I was still running an old version (8.04) I thought about upgrading. With the update manager is selected update to 10.04 and everything went on it's way.
During the process I got asked if I wanted to update the GRUB loader. Since I also use Windows and with a previous update of GRUB I couldn't start into it anymore I selected, "keep this version" (which I think is now causing this trouble).
The upgrade completed and restarted, however, Ubuntu now doesn't start anymore.
I get prompted with:
mount: mounting none on /dev failed: No such device udevd(896): error getting socket: Invalid argument ...
edit: I started Ubuntu with the live CD and typed gedit /booot/grub/menu.lst which gave me a blank file. Is that normal?
I did a distribution upgrade using "apt-get dist-upgrade". After rebooting, I receive a message saying "Failed to start the X Server". When I okay the prompt for more info, I see the following: GDM: Xserer not found: /usr/bin/X :0 -audit 0 -auth /var/lib/gdm/:0.Xauth -nolisten tcp vt7 Error: Command could not be executed! install the X server or correct GDM configuration and restart GDM.gdm[4678]: WARNING: gdm_server_spawn: Xserver not found: /usr/binX :0 -auth /var/lib/gdm/:0.Xauth -nolisten tcp vt7
View 9 Replies View RelatedI just upgrade from 10.3 to 11.4. Everything went fairly smoothly and most things are still working execp nfsserver
getting:
/etc/init.d/nfsserver start
Starting kernel based NFS server: mountd statd nfsdrpc.nfsd: writing fd to kernel failed: errno 13 (Permission denied)
rpc.nfsd: unable to create inet6 TCP socket: errno 97 (Address family not supported by protocol)
rpc.nfsd: unable to set any sockets for nfsd failed
dmesg:
RPC: server localhost requires stronger authentication.
[ 2545.282736] svc: failed to register nfsaclv2 RPC service (errno 13).
[ 2545.282742] nfsd: last server has exited, flushing export cache
[ 2545.282852] RPC: server localhost requires stronger authentication.
[ 2545.282955] RPC: server localhost requires stronger authentication.
[ 2545.283848] RPC: server localhost requires stronger authentication.
[ 2545.283957] RPC: server localhost requires stronger authentication.
I just did a yum upgrade (5.3 to 5.4) on one node of my three node cluster (RHCS), which did:
Rebooted to the new kernel, but cman failed to start. Rebooted back to the previous kernel, but no change, so it doesn't appear to be the kernel.... Some errors are:
On the upgraded node, the following processes are running:
Whereas on the non-upgraded node, the following processes are running:
When I restart, GRUB sometimes doesn't start. It just hangs at the flashing cursor before grub.
When I restart again, grub works fine. The flashing cursor shows at the top of the screen for a few seconds, and then there is one or more new lines, and then the grub screen.
This is on an HP Pavilion 640 which is otherwise very stable.
i have a netbook with ubuntu desktop 10.10 (gnome), i don't know what i've done, t got a message
"OAFIID:GNOME_FastUserSwitchApplet panel encountered a problem "
and i don't know how it was fixed, now it works good , but the panel doesn't start normally (quickly), i have to wait few minutes to get the menu bar and the other elements,
I'm using Ubuntu 10.04 LTS - the Lucid Lynx.
I have reinstalled mysql-server-5.1 using the command "sudo apt-get --reinstall install mysql-server-5.1".
But its giving error message at the end of installation when its trying to start the server.
The error message is as follows.
When i tried to start the server after the installation, i get this error message
Note : The file "/etc/mysql/my.cnf" is empty.
Just upgraded to 10.04 and Firefox will no longer start. I get the tab that says starting firefox, and then the tab disappears, and I never get a window.When I try to start via terminal it says (something along the lines of):Attempting to load libmoonloaderxpiSegmentation FaultI tried logging out and back in, no dice; restarted, no dice; uninstalled and reinstalled firefox, no dice.Running x64, if that matters, on a pretty decent laptop. I would describe my technical knowledge of Linux as moderate.
View 9 Replies View RelatedI upgraded to 10.04 and when trying to boot, the computer would hang at the splash screen. Going into recovery mode showed nothing in the log files. The Xorg and gdm logs were zero bytes but had the proper timestamp. I tried and tried, but could not get it to boot until I removed the nvidia-current package. Then the computer will boot, but the screen is partially corrupted with just a blue background. I can hit enter, then type my password and I can actually login, but I can't see a thing. I can cycle through the resolutions with Ctrl +, but the screen just still has a blue background and nothing else. Trying to boot in failsafe X mode gives the same screen. I tried putting the vesa driver in the xorg.conf, but no change.
I've tried the i915.modeset=0 boot option. I've tried the "xforcevesa" boot option, but nothing will give me a readable screen. As soon as I re-installed the nvidia-current package and ran nvidia-xconfigure, the problem came back and it hangs again.At this point, I'm stuck. I would settle for a plain VGA screen at this point, but I can't even seem to get that. I've read several posts here with similar problems and tried every solution put forth, I think, but have not found a solution.When the upgrade wanted to install the new /etc/default/grub, I kept my old one. I compared the two files at the time, but I didn't see anything new, but maybe I missed something. What new items if any does the upgrade put into /etc/default/grub?
I talked a friend into trying Ubuntu, and installed it via wubi. So far, he likes it a lot, but today I checked his computer out, and saw that he had a lot of updates pending. There was a kernel update, openoffice, grub, the whole lot. So, I started the update, and, when it finished, the system froze.
I restarted the PC, but now Ubuntu says that the root partition is not ready. When I open a diagnostic shell, it says "Root filesystem check failed". However, an fsck works just fine, and I can see all the files in both Ubuntu and Windows.
There's only one real disk, as far as I can see, /dev/sda1, and it's the Windows disk. The Linux root is a /dev/loop5 which points to a file under Windows. I suppose it's the wubi way, although I'm not familiar with that.
There's a possibility that the Windows disk had errors while I was running Ubuntu; in fact, Ubuntu said something to the effect while booting the first time it failed.
What can I do to boot normally?
After upgrading from 10.10 to 11.04, it appears gnome-panel won't start when I login in classic, classic with no compiz, or even failsafe/safe mode. What happens is the login will start, and I'll see an empty wallpaper with a cursor that switches between the hourglass circle spinner and a regular cursor.
If I hit alt+f2, the run dialog will appear, but immediately be killed (or something).
I am able to login with Unity as well as the recovery console. On the recovery console, when I try to launch the panel, I see this:
[blah blah blah]
b2b97000-b2ba8000 r-xp 00000000 08:05 2101405 /usr/lib/gio/modules/libgioremote-volume-monitor.sofish: Job 1, gnome-panel terminated by signal SIGABRT (Abort)
Since Unity doesn't work with focus-follows-mouse, but still tries to use focus-follows-mouse, I'm actually using IceWM to report this.
All this started when I decided to upgrade Ubuntu 9.10 to 10.04. Now Windows XP gives me a blank screen and doesnt run. I have tried a bunch of things but didnt help. I also clean installed Ubuntu 9.10 into a new partition and removed the deleted the other partition.
[Code]....
1. Windows XP on sda1 wont start from grub2 (version 1.97-beta4).
2. I can access the windows partition from Linux and see all the files.
3. When I boot using windows cd, and go to recovery mode it doesnt list Windows XP.
4. From windows Recovery mode when I try "diskpart" it says no partitions in c drive.
I just installed Fedora 12 on my HP laptop. And everthing has gone smooth, and I decided to reboot my machine. And it rebooted and the Fedora Loading logo camep and after it finished, it went to a black screen with a "|" just flashing and it's stuck on that
View 8 Replies View RelatedI started #aptitude safe-upgrade and switched to another user. Gdm showed the error and hung down the system. So I did reboot. After reboot if I start totem I see such a result:
Code:
$ totem
ImportError: No module named gobject
** (totem:1978): WARNING **: Could not import pygtk
ImportError: No module named pygtk
[CODE]....
I tried to complete the upgrade with aptitude safe-upgrade, but it shows that all packages are up to date. I am afraid that some other packages are affected by this crash. How can I repair system?