Server :: Putty/SSH Login Failed When Using RSA Public Key: 'Server Refused Our Key'
Sep 19, 2010
ENV: openssh-server-5.4p1-1.fc13.i686 Problem: I am unable to ssh using Putty (when using ssh-auth/pki) to a fedora box . I get the message: Server refused our key. Here's what I tried so far:
- Tried generating rsa (as well as dsa) keys on the linux server and put the generated public key in the ~/.ssh/authorized_keys. Then I converted the private key using PuttyGen.
- Also, tried generating keys using PuttyGen and then converted the public key and placed it on the server
- Configured the sshd server (ssh_config) for using RSAAuthentication=yes. Tried all combinations and purmutations; however, I still get the "Server refused our key" error.
I gannot connect to my Linux server using ssh and get Server refused to allocate pty message. Before it was working fine and today the problem appear, i don't know why this problem. Not that i'm new on linux system. my linux version is Linux 2.6.18-8.el5. I only found the same topic in this forum but not find solution, i try ssh with -T but still not working.
I am not able to login to server from console attached to server, every time i enter username & password but it again asks for username & password. But when i try to login to server from remote machine, login happens properly.
I setup logging in through putty client with keys, and password disabled, could log in from all machines on my network (xp and 7) with putty.When I finished hut down the server.Today I turned on the server box and thought I'd try logging in through putty. It kept telling me the server was rejecting my key.I plugged in a monitor and keyboard into the server and logged in via password then had no problem logging in through putty client.Question is, every time I shut the server down do I have to plug in the monitor and keyboard, then login, to be able to login remotely?
Im having some problem with my DNS. We are using a Linux web server as one of our web server which runs some live websites.When I trying to get the status of the DNS (NAMED) it comes the following error :
The same error appears when Im trying to apply any changes on zone level for a selected doamin in WEBMIN. (Basically can't apply changes)
WEBMIN > Servers > BIND DNS servers > click a selected-domain.co.uk > Apply changes
But the server seems to be running without effecting any probelms to the sites or users. I have been searching weeks for this problem & couldn't find a solution. And also Please note that Im bit new to Linux.
I would like to learn basic linux commands and editors (eg : vi). Am using windows and it is difficult for me to install linux in ma laptop. So is there any free linux login servers available in internet so that I can login to server with putty and try using basic linux commands and editors.
Run a script on ServerA which uses a ssh-connection to ServerB to execute a few commands on ServerB. As ServerB only allows login with username+password the whole stuff gets more complex. SSH provides key authentication enabling passwordless login as you probably know. So as stated in many tutorials I did the following:
I am working currently on my server on an issue, I configured the SSH Deamon that only people who have a valid ssh-key can login on to the server, and kicked the password option. Now I've added a user account git. I navigate to his home folder created the folder ".ssh" and created in that folder the file "authorized_keys" I copied my public key in there. Now on my local machine I added that identity (via ssh-add) and I wanted to connect to my server. but when I'm trying to login myself I can't the only message I get is "Permission denied (publickey)."
We have a CentOS server which has beed restarted due to some reason. Now we have ping to the server and we can reboot it via KVM, but the server loads to some messaageThis is filter.unknown_domain (Linux ...)Filter Login:and then it stops. Do you have an idea what might be the problem and how can we fix it?
vsftpd not working on my CentOS system. I tried logging in using FileZilla but the error message was: Connection attempt failed with "ECONNREFUSED - Connection refused by server".
I am merely trying to change the port for my ssh server.However it isn't changing.I edited my ssh_config file to:
Code:
# This is the ssh client system-wide configuration file. See # ssh_config(5) for more information. This file provides defaults for[code]...
When i try to connect to my server via port 443 i get a connection refused error. However when i try to connect via port 22 it connects. Since that didn't work, i tried restarting the entire server.To restate, i changed the config file and restarted ssh then the computer, however the port didn't change.Ohh and yes my router is set to port forwarding on port 443, though it doesn't matter since I'm inside the network.
I have configured openssh 5.8p2 with centos 5.6. My sftp is working fine with chroot environment but i am having problem with SCP. I am dealing with muliti Redhat servers. When i try to transfer data from other linux server through scp it gives connection refused. For e.g ssh 5.8 is configured on new server and i want to transfer files from old server which is using openssh 4.3 version.i created same username and password on new server as on old server.My sftp users on new server has no shell access but only sftp access. When i try to scp from old server to new server it gives error connection refused. Is the below configuration only for sftp and can't scp? According to google the configurations i found are for scp and sftp. Do i need to generate ssh keys by giving users on new server shell access, once created then stop shell access again, as i dont want to give shell access permanent for security reasons? but i want to use ssh keys for more security as well.
Port 22 PermitRootLogin no 1.override default of no subsystems[code].....
I have configure the virtual mail server both in vexim and postfix .But when i tried to configure the email client on thunderbird and evolution i get login failed error.I am using courier imap for pop3 and imap authentication.
I m trying to use VSFTPD, but it is failed to login of local users, i did tried to login on localhost, it become login successfully on localhost, but taking much delay to login. and login become fail from remote computer. this is text of "vsftpd.conf"
I want to connect to my debian server through putty, but only i got is the message - Network error: connection refused. I try with different setting on the server and in putty, but there is no effect.
Here are my settings: for the serveer i use [URL]
Code:
Port 22 # listen address i changed to accept all addresses ListenAddress 0.0.0.0
[code]....
i have no /etc/ssh/ssh_host_key file and try to comment it but with no success. All other lines at the config file was commented.
Can you find my blind spot? I had PuTTY up & running untill I did a reinstall of Fedora13.I can ping 192.168.1.163 fine. SELinux is disabled. Firewall is default (SSH allowed on p22).I have just disabled the firewall with same result)
PuTTY reports: =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2010.07.20 16:23:52 =~=~=~=~=~=~=~=~=~=~=~= Event Log: Writing new session log (SSH raw data mode) to file: C:UserswimDesktopputty.log
I researched a long while and could not find an answer to these problems, so here I am. I have a debian server running on my home network. I have it running LAMP and it has a live website.
I have samba running and share files with my windows 7 machine, so they do connect.
When i try to use putty it always refuses the connection.SQLyog tells me off too, but it only cays it cannot connect.
I was checking into SSH, since that is how they are both trying to connect, but I can not find adequate info online for my problem.
I have debian lenny running, I was pretty sure it has ssh running, but i couldnt locate 'sshd'
Is SSH on there by a different name or do I need to install the service.
(ps - getting samba running was a nightmare, but i think it was windoze fault, i tried setting up the debian machine exactly how the guides said to do, but it never could connect and denied passwords constantly, then the next day after a few windows reboots had happened, all of the sudden it worked. Don't know what the deal was there. Could that be instrumental? Sorry I am a web dev and not a networker so this stuff is not my forte.)
A simple FTP server which allows me to acces the /var/www/html directory to upload new files for my apache webserver.
What are my problems:
When trying to login it says the following:
***Begin*** [root@ICT2-Gateway ~]# ftp 127.0.0.1 Connected to 127.0.0.1. 220 FTP Server ready. 500 AUTH not understood
[Code]....
As you can see this has nothing to do with faulty firewall settings since i'm only trying this locally. Futhermore the password is 100% correct (and keyboard layout).
Since I've changed alot in my config file it thought it's not worth mentioning here, I'm reverting back to default.
I'm new to send mail. I have a server with a public address and domain name. But I only want to implement a small sendmail network on our 20-user LAN. Can I turn my public server into a sendmail server? Are there any simple step-by-step instructions for this?
Another question though...i have a fedora 12 server set up and i have created 3 sudo users. I have created 3 putty keys (public and private) using putty key gen and basedn my research i was told to put the public keys in /home/"user"/.ssh/authorized_keys .I did that but when i tried to log on using the key...the server is saying "server refused key" could anyone assist in this issue
I have the opportunity to set up our local public library with a linux server. The primary need is for the server to land wifi users to a hotspot splash screen where they will accept terms of use and indicate what town they are from by checking a box or selecting from a dropdown menu. Users of terminals in the library would also have to indicate what town they are from. Things such as content filtering may come later. What distro would be recommended for this? Ease of use and configuration is important. They basically want to track use of the internet.
I have configured web server in my home. it is working in LAN. but every one should be accessed from out site from LAN. how is possible ? i would like to access as http://123.123.123.123 Then i dont need the host name? My public IP http://123.123.123.123. My LAN IP [URL]... i did the port forwarding in my router. when i access the web from outside automatically logging into my ADSL router.
I like the server login information that gets displayed when you login to a 10.04 server. It lists disk usage, CPU usage, Temperature etc...
Unfortunately I had problems installing 10.04 from a USB. At the end of the process the master boot record was stored on the USB and not the hard disk.
But now when I login to my server I don't get the server information.
i buy a dected server and i want control my server with UltraVNC Viewer the company host is give me just user name is root and password of ssh and when i ask him to instal for me vnc server he say sorry man i dont suport software.so can you help me how instal vnc server by putty (ssh)
I am access my linux box remotely using putty. I ran some build process on the remote machine. I lost my connection and now I had to re login using putty. I dont know if my process has finished or not. How will I check that.
I can't figure out why I keep getting kicked out of the ssh session almost immediately after login to an ubuntu 9.10 server (32bit).See the screenshot. I just installed this server and didn't make any ssh config options. I thought it would work right away.When I ping that server I get sporadic responses where some packets are lost. It's an old Dell poweredge 1400.where should I start troubleshooting? Authentication? Hardware?
So when I try to connect to my ubuntu server with ssh like thisX@dell-desktop:~$ ssh servername -P 1934X@servername's password: Permission denied, please try again.but when I use putty (yes with the same port number and the same settings)it works fine. This didn't start happening until my friend did a reinstall on the server, he didn't have a clue as to why it would do this.
