Ubuntu Installation :: 9.10 Server - Load Installer Components From CD Failed
Mar 6, 2010
I recently brought home an old Compaq server from work. I was told that it works fine. When I brought it home, I tried installing Ubuntu 9.10 server from a cd. While it's trying to install, I get the message "Installation step failed. An installation step failed. You can try to run the following item again from the menu, or skip it and choose something else. The failing step is: Load installer components from CD." I turned off the computer and tried it again several times. Each time the same message appears.
View 5 Replies
ADVERTISEMENT
Jan 7, 2010
i am trying to install ubuntu from an SD card, i can run it from the card, and everything works fine, all but the install. i get to step 3 of 6. when pressing forward i get an error message ubiquity.components.partman failed exit code 141
View 1 Replies
View Related
Apr 11, 2010
I am re-installing Ubuntu onto my desktop PC which has Windows 7, openSUSE 11.2 and Fedora Core 12. First I tried Ubuntu 9.10. Near the end of the installation the machine reboots and the monitor shows the following message:
"Ubiquity.components.partman failed - Exit code 10. Further info in /var/log/syslog"
Tried again with Ubuntu 10.04 beta2 with same problem.
How can I view and read /var/log/syslog if Ubuntu fails to be installed and therefore I cannot access this log?
View 1 Replies
View Related
Apr 9, 2011
I've been trying to install Ubuntu 10.10 on my custom built AMD Athlon FX-53 system to use as a web server. I downloaded the AMD64 desktop version and whenever I boot to the CD it'll go through the loading screen, bring up the install background and then the mouse cursor will appear. After that the mouse cursor keeps switching between the loading one and the regular one and it never fully loads the installer.
The system specs are:
AMD Athlon FX-53 @ 2.4 GHz (Stock)
1 Gb OCZ PC-3200 ram (2x512)
PNY Verto FX5200
Western Digital 40 Gb IDE hard drive
based off an Asus SK8V motherboard (Skate 5 to me...)
I was able to install the 32-bit version and I've tried 2 burns, one on a CD-RW and one on a CD-R and the checksum is the correct one based on whats posted on the site.
View 1 Replies
View Related
Jun 24, 2010
i try to boot off the cd, it loads vmlinz and init.rd, anaconda starts loading.it mounts the temp filesystem and freezes. i can't choose how to install or anything. nothing comes up graphically.
View 2 Replies
View Related
Jan 31, 2010
I'm facing a problem installing Fedora 12 x64 on my desktop.I've been trying to get the Graphical Installer (anaconda) to run, in vain. The error message I get is reproduced below:
Code:
(EE) [drm] drmOpen failed
(EE) NOUVEAU(0): [drm] error opening the drm
[code]....
View 1 Replies
View Related
Jul 2, 2010
HDD with four partitions: Three DOS bootable primary partitions are located in the head, and the residual extended partition is divided into several logical drives.
1st trial: 10.04 installer recognized the last largest logical drive for system installation, but installer truncated the extended partition, and created the "terrible" 5th primary partition at the end of the HDD. GParted and other utilities cannot access to this 5th primary partition. (So, I restored the lost partition table on the HDD manually by MBM. But several OS were broken.)
2nd trial: To avoid making this "terrible" 5th primary partition, I located the largest logical drive for installation at not of the end.10.04 installer recognized this logical drive, but failed again.I tried GParted. but also failed to formating to ext4.Maybe, 10.04 installer failed at this formating step. Logical drives are not supported in 10.04 ?
View 9 Replies
View Related
Mar 10, 2016
I am trying to clean install Jessie 8.3.0 onto an old PC, where I already have wheezy 7.7 working. I am using the 3 DVD- i386, which passed the integrity check.
Installation goes on smoothly till completing the "Select and Install SW" stage from 1st and 2nd DVD. At this point I get the warning that "Installation step failed, ..", giving the choice to repeat.
When repeated, the process gets completed (without asking for 2nd DVD), the new installation boots normally, but the KDE desktop opens irregularly, with some basic applications missing, and some flaws during certain operations.
The APT does not show any missing/broken link. I tried and repeat the installation with different choices as for kernels and/or desktops, but got the same result. I cannot guess where the problem originates, nor whether it is a known bug of the installer.
View 6 Replies
View Related
Feb 6, 2011
I'm trying to install stable Squeeze from HD "!! Scan hard drives for an installer ISO image. The quick scan for installer ISO images, which look only in common places, did not find an installer ISO image, but it may take a long time. Do full search for installer iSO image? [YEs} No kernel modules were found. This probably is due to a mismatch between the kernel Version available in the archive If you're installing from a mirror, you can work around this problem by choosing to install a different version of Debian. The install will probably fail to work if you continue without kernel modules"
[Code]....
View 1 Replies
View Related
Nov 23, 2014
I am installing Whezzy and the installer failed to install grub on the MBR of /dev/sda
My disks are
- /dev/sda : the flash drive with the debian ISO
- /dev/sbd : a small SSD for the / partition (sdb1)
- /dev/sdc + /dev/sdd : a software RAID-1 array with LVM for /home, ...
Grub fails to install on /dev/sda which makes sense since this is the flash drive containing the Debian ISO so no MBR.
I already tried to run grub-update manually on /dev/sdb (with chroot /target grub-install --no-floppy --force "/dev/sdb" ).
It works but the system is not directly bootable. I had access to a second PC to read the grub documentation so was able to boot and to fix my system but this is annoying.
Is it normal to see my flash drive as /dev/sda? Could it be that my flash drive is incorrectly detected as a HD?
Is there a way to force the installer to install grub on /dev/sdb?
View 2 Replies
View Related
Aug 28, 2010
I try to install linux on hpc mini. Let's crack some keyboards. I have just bought a new pc: hpc mini compaq! I find windows Xp rather fine; but let's try linux. The PC has no cdrom, so, I cannot boot from any ISO of debian. I choosed testing netinstall, and followed the how to given on the debian website from another PC using knoppix iso cdrom. I did placed five files as shown here onto my pendrive as followed in one howto: I found 5 files for testing:
Code:
debian-testing-i386-businesscard.iso initrd.gz vmlinuz
and
Code:
26644480 Aug 28 17:44 ../squeeze-debian-testing-i386-businesscard.iso
with :
[Code]....
View 2 Replies
View Related
Feb 16, 2010
I am trying to compile Zabbix on Centos 5.4 and while tying to compile it with mysql and some other parameters it gets failed because missing components.
Quote:
I couldn't find any jabber-devel or jabber pckg in repo.
View 3 Replies
View Related
Mar 17, 2011
I have an apache web server with php 5.3 and I need to connect to a webservice I set up in sqlserver 2008
Both servers are in the intranet.
If from my browser I write http://192.168.2.2/internet?wsdl I am prompted for a user and a password, which are those of a windows user with permissions to connect to the ws. After writing them I can see the XML file in my browser.
the php file is code...
I've tried variations in the url, the user, with and without password, with no luck
I've googled a lot, with no luck
View 1 Replies
View Related
Aug 15, 2010
I have never in my life got this to install correctly. No the recommended drivers dont seem tow work well for me so I want to install the drivers properly from the website. Something that people have said solvs many problems. I keep getting "The distribution-provided pre-install script failed! Continue installation anyway?" Anyways here is my log.
Quote: nvidia-installer log file '/var/log/nvidia-installer.log' creation time: Sun Aug 15 15:34:52 2010
installer version: 256.44
[Code].....
View 9 Replies
View Related
Sep 15, 2015
I have this kind of error:
Code: Select allr@prime:~$ systemctl status systemd-modules-load.service
● systemd-modules-load.service - Load Kernel Modules
Loaded: loaded (/lib/systemd/system/systemd-modules-load.service; static)
Active: failed (Result: exit-code) since Чтв 2015-08-20 08:07:38 EEST; 13min ago
Docs: man:systemd-modules-load.service(8)
man:modules-load.d(5)
Process: 150 ExecStart=/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE)
[Code] .....
View 0 Replies
View Related
May 25, 2011
I am installing fedora 15 in vmware 7.1.4.It tells me "Gnome3 failed to load and started in the fall back mode" when accessed in live-cd.Ever since fedora 15 beta or any other distros take gnome3 as default destop,I haven't experienced a beautiful normal gnome3
View 14 Replies
View Related
Oct 5, 2010
I have a Dell Poweredge 2970 2x3.0 GHz AMD 64bit dual core, Perc 5/i controller, and 2 brand new Fujitso SAS 15K 146GB drives.
Trying to install Ubuntu 10.04 Server 64 bit from USB. At the point of detecting disks, the installer only recognizes the USB. The installation was created using Pendriveinstaller ver1.8.0.1 per Ubuntu Server web site instructions. I have the drives configured as 2 separate raid 0 arrays using the bios raid configurator. The drives have been initialized. (Tried before with a single Raid 1 array, but had same issue and since have read Ubuntu support for hardware raid is not great, so was going to bypass hardware raid for now).
I've seen some chatter on here about opening a terminal at this point and removing dmraid but don't see an option for terminal only shell.
View 1 Replies
View Related
Feb 2, 2011
I just downloaded the server version for v10.10 (ubuntu-10.10-server-i386) and when I start the installation, the installation gets stuck on ISOLINUX 4.01 debian-20100714 ETCD Copyright (C) 1994-2010 H. Peter Anvin et al Loading bootlogo... and it stays there. The computer is a laptop: DeskNote 512M memory. Gentoo distro works ok on this PC.
View 1 Replies
View Related
Jul 20, 2011
I have a Kingston DataTraveler 112 8GB USB drive, and when i load openSUSE on it and slap it into my laptop (that is running Fedora 15 with no problems), i get this:
Code:
SYSLINUX 4.03 2010-10-22 EDD Copyright (C) 1994-2010 H. Peter Anvin et al
ERROR: No configuration file found
No DEFAULT or UI configuration directive found
boot: _
I have tried the 4.7 GB DVD image, and the KDE Live CD, and both shows this. Also i tried UNetBootIn (is that what it's called?) and it's the same too.
View 9 Replies
View Related
Mar 29, 2010
I am trying to install Fedora 12 using the x86-64 DVD. My problem is everytime I try to install with the normal settings or basic video deriver setting it says "X failed to load" and so Anaconda never loads. How do i fix this problem. I have an Nvidia 7800GTX.
View 1 Replies
View Related
Jul 30, 2010
I tried installing VLC through Synaptic. However, i got the reply "all components could not be installed". VLC does not appear in the menus. All four software repositories have been ticked.
How can I install VLC?
View 4 Replies
View Related
Jul 17, 2010
I just installed OpenVPN using apt, and it doesn't seem to have components which are distributed with the source, such as easy-rsa. Why would tools like this be excluded from the package? I prefer to use apt rather than compiling from source, to keep things neat and simple.
View 2 Replies
View Related
Aug 26, 2011
I used
Quote:
sudo apt-get install eclipse
to install But I am not able to find the Java EE components is there a another step that I should do get Enterprise components installed or is there a different command
View 1 Replies
View Related
Jan 10, 2010
I uninstalled Empathy, now I have error in gnome with OAFIID:GNOME_FastUserSwitchApplet failed to load. Installing back empathy dont solve the problem. Pidgin is better by far, why ubuntu want me to use empathy? Anyway, how should I reinstall this applet? I google it, but I cant find out the way to install the session indicator applet. Sorry, noob here.
View 2 Replies
View Related
Jun 26, 2011
I have an old desktop I've been working to put back together and get working. When I took it apart I was under the assumption there was a problem with the mobo. Now I've begun to question that (the information that led to that belief was very slim).
I'm looking online right now but if anyone knows of a Linux distro I can use to diagnose/ check hardware in that machine. Something that runs live would be preferable. I'm thinking knoppix and am reading about it right now.
View 1 Replies
View Related
Jul 31, 2011
trying out the new Opera 11 browser in Ubuntu, but when trying to use unite feature i am unable to install the components required for it to work.
View 1 Replies
View Related
Mar 22, 2011
I am slowly learning Linux by bringing up a server. Using tasksel, I installed the LAMP-server, which went fine. Now, however, I have mucked about with various config files and made the setup unusable. I'd like to do uninstall all of the LAMP packages and do a clean (and more thoughtful) install. Here's the problem: tasksel returns an "aptitude failed (100)" error. I have search various forums and all of the help related to this error (which I can't actually find *explained* anywhere) is related to installing packages. I tried them anyway, without success. man pages and the stack of manuals I have don't seem to be of much help either.
- describe what the error message means?
- a way to remove the packages or the config files by hand?
View 3 Replies
View Related
Aug 10, 2010
I have an HTPC that was giving me insane amount of problems after 3 months of good use.
1x 250gig Samsung Drive (OS Drive)
3x 1TB Western Digital Caviar Green (Raid-5)
In 9.10, the raid was working fine. I decided to fresh install Ubuntu 10.04 and I can't seem to start the raid array. In Disk Utility, the array shows up but when I try to start it I get the error "Not enough components to start the array"
I've tried to assemble the array using mdadm and the following:
mdadm --assemble /dev/md0 /dev/sda1 /dev/sdb1 /dev/sdd1
This returns the following error mdadm: failed to create /dev/md0
I have no idea what to do now, and unfortunately I don't have any backups
View 1 Replies
View Related
Apr 30, 2011
I am running 2 Ubuntu servers, one as UEC frontend and the other as UEC node. I started, last night, the server upgrade on the frontend. As it promised to take several hours I left it alone to proceed through the night. This morning it was waiting on a prompt which, by virtue of hitting esc to relight the monitor, it continued upgrading packages. At some point subsequent to that it paused on a discrepancy between the eucalyptus.conf file the install wanted to save and the eucalyptus.conf file that existed. I reviewed the deltas and determined that the current, as it existed, would suffice. I received 3 more messages on the console:
Installing new version of config file /etc/init/eucalyptus-network.conf. Installing new version of config file /etc/init/eucalyptus-conf...
eucalyptus start/running process 15290
Then no further console messages nor apparent disk or cpu activity
I can shell into the machine and see the following:
Code:
root 7077 6784 0 Apr29 tty1 00:00:33 /usr/bin/python /tmp/update-manager-0r8nH5/natty --mode=server --frontend=DistUpgradeViewText
[Code]...
View 9 Replies
View Related
Dec 29, 2009
I am trying to install Fedora 12 x64 on my 27" iMac 10,1. I have tried both the installation dvd and the gnome live cd (both x64 i did not try the x86). On the installation dvd I get as far as the menu giving me the boot/install options - I have tried to install both with a basic video driver and the regular install/upgrade option - both times it begins loading components for the installer program (/sbin/loader) etc. After it loads sbin/loader and mounts the partitions it freezes with half the screen being the terminal txt beforehand and the other half being just a standard fedora logo w/blue background. It is not much different when I try the live-cd the only different is it does the exact same thing when the timer for automatic login is done. Any possible command line arguments that I could use to stop the graphical corruption?
View 2 Replies
View Related
