Today I saw that there was an update available for my LAMP server that involved BIND.
So after I ran an apt-get upgrade i got the following big stack of messages ending sadly with error and I cannot upgade the of "fix" the system after that. Any Ideas? code...
I just tried to upgrade my server to the latest version of Bind9 and the process fails gets frozen.First note that I have Bind in a chroot jail.When I try the upgrade, or the recommended "dpkg --configure -a", it displays this then hangs:Quote:
Setting up bind9 (1:9.7.0.dfsg.P1-1ubuntu0.1) ...
* Stopping domain name service... bind9 rndc: connection to remote host closed
[code]....
what is bind vs bind-chroot vs caching-nameserver ?what is the different between eatch others ?
View 7 Replies View Relatedi'm trying to get a bind server up and running on my opensuse installation but I'm having some slight problems, I've been looking for a solution to what is probably a silly problem for quite a while so I decided to come here.
[Code]...
I'm having a problem getting BIND to start after doing the FC10->FC11 upgrade. Others have been reporting some bad symbolic links, but this isn't that problem. I've searched the forums here, but I don't see anything like this anywhere.
Here's what I see:
Code:
[root@atomu etc]# /etc/init.d/named start
Starting named: [FAILED]
So, no error message. Logs read as follows:
Code:
Jul 8 00:38:00 atomu named[2414]: starting BIND 9.6.1-RedHat-9.6.1-2.fc11 -u named
Jul 8 00:38:00 atomu named[2414]: built with '--build=x86_64-redhat-linux-gnu' '--host=x86_64-redhat-linux-gnu' '--target=x86_64-redhat-linux-gnu' '--program-prefix=' '--prefix=/usr' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc'
[code]....
I just upgraded from FC 13 to FC 14. I run an ssh server on a port in the 3000s (call it 3xxx, to protect the innocent). When I try to start sshd with the "Port 3xxx" option in sshd_conf, I get the following error in /var/log/secure
sshd[5104]: error: Bind to port 3xxx on 0.0.0.0 failed: Permission denied.
sshd[5104]: error: Bind to port 3xxx on : : failed: Permission denied.
I did not use to have this problem in FC 13. how I can give sshd the necessary permissions now?
I and setting up a home web server using Ubuntu 10.04 server (local only). I am currently using Webmin 1.53 to access it remotely all is going great very easy to use. Webmin - Check, ftps-fileZilla - Check, Apache -It Works BUT I cant seam to set up Apache as a named server using Bind DSN. Tried most of the help in the fourms and ..... I think my problems is in the master server selection, do i have to use [URL]... or can i just use myservername. I have tryed both with no luck. First time with the server addition.
[code]...
I am configuring bind9 on fedora 9(sulphur).I have configured /etc/named.conf and created zone file in /var/named/I have started the service but when I am executing the command nslookup mydomain.com it is not able to resolve the name.Another problem I am facing when I do telnet localhost 53,I am able to connect.but when I do telnet myip 53 it does not connect.Seems to be a firewall problem but I ve disabled iptables selinux completely even I ve disabled dnsmasq but still not working.
View 1 Replies View RelatedI have a BIND server that I'm setting up with different views. There is another server out on the public Internet that currently handles all inquiries for this domain. I had installed the Yum packages, chroot, etc. and edited the config files by hand. When that didn't work, I erased the server and started over using Webmin to build everything for me. Same result. I want to setup and verify everything is working on this new server before I take it into production.This is in /var/log/messagesQuote:
Jun 13 21:33:20 dns1 named[13838]: starting BIND 9.3.6-P1-RedHat-9.3.6-4.P1.el5_4.2 -u named
Jun 13 21:33:20 dns1 named[13838]: adjusted limit on open files from 1024 to 1048576
[code]...
I need to know how to configure the address of the next level DNS server in my BIND server. im in a FEDORA 10 system.
View 3 Replies View RelatedI want to join standalone windows xp machine to Linux Domain (Redhat 9)..
View 3 Replies View RelatedI have a dedicated server with Fasthosts. It's currently running Ubuntu Server 8.10 and I want to update it to 10.04.
The only issue I have so far is it runs Matrix Server Appliance 2.0-38
Does anyone know if this will be affected by the upgrade in a bad way?
I have had no luck finding a site for Matrix or any other information.
For the upgrade itself, I was hoping to run do-release-upgrade.
I'm trying to setup DNS server. But i'm getting this strange problem.normally nslookup and workin for other sites.problem only with my local setup. can't see what i'm doing wrong.i've had setted up DNS server before but had no problems.can't see any solution on google.
So...
centos 5.6
bind 9.7 (from repository)
[code]...
I am still quite new to all this but I guess we were all beginners once, this forum seems very helpful.Here is my situation, I will give as much detail as I can.I have a dedicated server which is running CentOS release 5.5.Initially I had Plesk installed, but when I upgraded PHP I damaged the Plesk configuration, and so I installed Webmin instead.
All seems to be fine with this, apart from the DNS configuration / BIND server.I know this because I have one site which uses an external DNS server and this works fine (i.e I can access it from a browser). All the others don't resolve - i.e the ones I set up in Plesk.I've done a bit of investigating to see what is going on, but I'm stabbing in the dark a little.
I've been looking for a good tutorial for setting up a BIND DNS server for my local network. What I want to do is..Have BIND running on my home server receiving all DNS requests.Have certain zones (my.zone.lan) pointing to custom IP addresses (I.E. server.lan points to 192.168.{server IP})Zones that don't exist should be passed on to OpenDNS for processing.
View 6 Replies View RelatedI have configureed Bind in a Linux box. Well pc1 i.e "pc1.mydomain.com" is my client machine and main server is the computer in which bind is install.The client computer pc1 and the main server (Bind server) i.e FQDN "mainserver.mydomain.com "are on the same network.from client machine i can't resolve the name to IP address as my server do successfully with client. The /etc/resolv.conf file in my bind server is as
Code:
search mydomain.com
nameserver 192.168.1.254
The named.config it main configuration is as below
Code:
zone "mydomain.com" IN {
[Code]...
How to install step by step to install bind server on RHEL 5.
View 3 Replies View RelatedI am running 2 Ubuntu servers, one as UEC frontend and the other as UEC node. I started, last night, the server upgrade on the frontend. As it promised to take several hours I left it alone to proceed through the night. This morning it was waiting on a prompt which, by virtue of hitting esc to relight the monitor, it continued upgrading packages. At some point subsequent to that it paused on a discrepancy between the eucalyptus.conf file the install wanted to save and the eucalyptus.conf file that existed. I reviewed the deltas and determined that the current, as it existed, would suffice. I received 3 more messages on the console:
Installing new version of config file /etc/init/eucalyptus-network.conf. Installing new version of config file /etc/init/eucalyptus-conf...
eucalyptus start/running process 15290
Then no further console messages nor apparent disk or cpu activity
I can shell into the machine and see the following:
Code:
root 7077 6784 0 Apr29 tty1 00:00:33 /usr/bin/python /tmp/update-manager-0r8nH5/natty --mode=server --frontend=DistUpgradeViewText
[Code]...
I've just upgraded by dedicated server with OVH from 9.04 to 10.04 and it now refuses to boot with the error "kernel panic unable to mount rootfs on unknown block 2,0" With OVH you must use their custom kernel, but this has been installed and seems to boot thus far, but fails at above. OVH also recommend adding a dev line to fstab, which I've done: [URL] I'm now at a loss as what to do, as it seems the kernel can't see the hard drives, yet when I boot up in rescue mode, I can mount all the drives fine.
Files of interest below.
lilo.conf
Code:
boot=/dev/sda
prompt
timeout=50
default=linux_updated
[code]....
I want to make a dns server using bind 9.5.1 in fedora 10 but i 've got this following error when nslookup.
Quote:
nslookup admindevice1.fmipa
Server: 127.0.0.1
Address: 127.0.0.1#53
** server can't find admindevice1.fmipa.dns.fmipa: SERVFAIL
this is my named.conf
Quote:
//
// named.conf
//
// Provided by Red Hat bind package to configure the ISC BIND named(8) DNS
[code].....
but when i start bind and try my dns i got a wrong ip for both ns and admindevice1.
what is the use of bind & cache Pkg in DNS server is it posssible to configure DNS without cache & how
View 2 Replies View RelatedI have read a lot of documentation but it is still hard to find a proper answer to my doubts.About the hostnames in a domain, how is it associate to a determinated port?
For example, when I type on the browser webmail.sparc86.net and then I get redirected to the port of 20000 of this same domain. Fine, but how does it work that it knows it should be redirected to the port 20000? From where is this information (the association webmail-port 20000) taken? The apache will manage this, right? But what about other services like ftp?Another example, If I wrote my own software listening, let's say on the port 40000 and I want to have a domain like "mystuff.sparc86.net" how would I let it be redirected to the port 40000 ?
Currently i using webmin,but it missing some important things like $variable -where $variable would be automatically replaced with added domain,and it's kind a strange since plugin for managing other dns server on webmin does that. Also i was not able to generate 100% correct all records,only partial,which make it useless since i was need to fully replace it anyway.So can someone recommend any script/tools for it?I would be even happy with combination of batch tools(which might be even best solution since then i would not need to bother with installing script). How my dns records look:
PHP Code:
$ttl 38400
@ IN SOA ns1.nameserver.com. root.localhost. (
12520521667
7200
7200
604800
[Code]...
i am trying to run bind in centos 6 and bind keeps giving me errors every time i check all of the configurations. the named.conf file works fine but the zone files keep giving me errors heres the contents of my named.conf file
Code:
options {
directory "/var/named";
listen-on port 53 { any; };
allow-query { any; };
[Code]....
I am currently running the latest version of Bind, and for some completely unknown reason I can NOT get queries to work for PTR records. All queries to the servers for reverse name lookup get query denied:
Using domain server:
Name: 66.150.173.1
Address: 66.150.173.1#53
Aliases:
Host 27.173.150.66.in-addr.arpa not found: 5(REFUSED)
And it shows in my logs:
I am at my wits ends with the piece of crap. Can anyone shine some light on why this damn Bind install won't respond to these queries?
For reference here is my named.conf:
Code:
I am working one project and i want to know that is it possible to find out the DNS (BIND) QPS (query per second). I mean how many QPS BIND can handle.
View 2 Replies View RelatedI'm using xubuntu 9.10. NOT ubuntu server. I need to install a lamp server on my box. I cannot install a new OS like ubuntu server, have to use what I got.when I run apache2, I get:
Quote:(98)Address already in use: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down Unable to open logs I've changed the port that php listens too to 8080, 81, and I get the same message but with the new port number.
I've removed and installed apache three times, read all kind of threats on the web, but cannot find the solution! it's just driving crazy.
I am a newbie in configuring linux servers. Can I have an easy step-by-step walkthrough for bind 9 with chroot on RedHat enterprise 5 .
View 3 Replies View RelatedI am at first stage of installing dns after installation of redhat 5 am unable to install any package like yum install bin* and yum install cach* and it displays no match for afgument and nothing to do what could be the problem with my redhat installtion and what should i do for this type of problem and explain me how to install bind in dns and dhcp and dc.
View 3 Replies View RelatedI am trying to set up a raid set on my computer but I have run into a small problem. it seems that the sata_promise driver is not loaded until after the md: bind has been performed. This means that my raidset will be missing some of it's discs and fail to start.
Is there any way to have the sata_promise drivers load earlier in the boot process?(more details can be found in my other post)