I upgraded the computer of my son from kubuntu 9.10 (I think) to Kubuntu 10 and, once the system rebooted I got the following error message:
Quote:
Could not start ksmserver, check your installation When I press "OK" I am back at the login screen.
Two questions:1) What is a ksmserver and: 2)How the hell do i solve this problem?
I'd like to install Ubuntu 10.04 32 bit, over my Ubuntu 10.04 Amd64.
When I insert the live CD (that is working, I've used it yesterday to
install on my desktop at work),
the Boot from CD is skipped (but is configured properly
in the BIOS, in fact when I installed the 64bit version I had no trouble
at all) and the existing OS is loaded instead.
It seems to me to read some error related with the device (but
is fast and can't be sure what the message says).
After Ubuntu has been loaded, I can read and explore the CD.
I'd like to know how to solve this issue, any advice?
I'd want to boot from cd again, but if you know how to start
live installation when Ubuntu is already running, may you please let me know?
I just installed Ubuntu but couldn't be sure that everything went well. I had some errors with the installation disk (certain fragment not read) but the entire installation went through anyway. Is there anyway I can check if it's alright?
View 1 Replies View RelatedInstalled the RC of 10.10
Updated when I came back, now selecting Ubuntu from the boot screen just restarts my PC, taking it back to the boot screen.
I launched 11.04 upgrade from a 10.10 ubuntu. Now default linux does not boot it blocks on the ubuntu screen with dot not moving. Dot come back alive when I shut down system. Commands does not work. I can launch an older kernel but it is a pain, and I cant change boot order too, which is a big WAF issue. What can I check or do?
View 3 Replies View RelatedToday I've upgraded my Maverick installation to Natty using the "do-release-upgrade" command. The upgrade completed successfully according to the tool, but after I rebooted my system and chose "Ubuntu, with Linux 2.6.38-8-generic" in GRUB my screen went black showing an blinking underscore and rebooted after approx. five seconds.
When I entered the Safe Boot environment the last thing my system did before rebooting was attaching the SCSI devices but didn't show any error message.
Same with (successful) clean installation from Desktop-CD and Alternate-CD on a clean HDD.
After I upgraded I still had access to the "Previous Linux Versions" option in Grub, but when I started the Maverick kernel my system displayed a blinking underscore for about 30 minutes - until I shut it off. In the Safe Boot environment of the old kernel the "Failsafe X" option resulted in the blinking underscore again.
This happens with the final version, but also happened with the alpha and beta versions.
Ubuntu is the only OS on my PC.
I only tried this with the GNOME version of Ubuntu, but will try to use Xubuntu now.
Running the latest wubi.exe on Windows 7 x64.It creates a %temp%/pylXXX.tmp.exe file (with wubi logo) that it removes after ~1 second.It creates a %temp%/pylXXX.tmp folder wich is empty and that is not removed.Running in XP compatibility doesn't help, removing generated files don't work either.The wubi process dies quite quick and after it gets ~4000kB memory usage.I don't find any log files
View 3 Replies View RelatedI have just made a fresh install of Ubuntu 10.04 on my laptop which was already running on windows 7. The installation itself was ok, however, after the restart in the end it did not want to load anything. I get just a blank screen. I am not much of a linux expert, so all I could do is start thee computer via a live cd and see what is there. And it looks normal - windows is intact, new linux partitions are there, GRUB is also there. What should I do? Reinstalling everything is not a proper solution...
View 9 Replies View RelatedI was looking in to a easy to use linux distro to surf the internet, do some text editing and emailing for my moms old laptop, cause its being very slow with windows xp on it.
specs: intel pentium 4 2.4 ghz
256mb ddr ram
40 gb ide harddrive
nvidia geforce go 4 series gpu.(if I remember correct it is a MX 440)
brand medion
I figured out Lubuntu would be al right, so I connected my usb cd/dvd reader(cause intern cd/dvd drive is broken) put in a disc that I burned with my other pc and started up the os. the live cd is working al right when its at the menu and I choose to start it it hangs for 30 sec-2 min then it starts to load and eventually the desktop shows up then I can start to do things but as soon as I open something the gui disappears before the program opens.
I tried to run the installer but I get the same issue. I see my mouse changing when I start the installer the mouse pointer doesn't points to the left side of the screen any more it points at the right side(which is strange) I tested this on my other pc and the installer loads up just fine and everything works ok(though I still have the mouse pointer issue if I start the installer)
btw if you got any ideas for a better distro these are the requirements: my mom is a linux newbie so an easy to use, lightweight distro for internet browsing, emailing and text editing(word) is needed. I think lubuntu will do? btw2: is there any way to import settings from the windows os to the linux os? btw3: dual boot should work just fine if I install this without deleting the windows partition right?
First off I'm running Ubuntu 10.10 64bit, if you would like a complete discription of my hardware you can find my lshw > [URL]I seem to have broken my VirtualBox installation, I went from VirtualBox OSE to VirtualBox 3.2 (again 64bit version downloaded from virtualbox.org the about says version 3.2.10 r66523) I tried apt-get purging 3.2 and going back to OSE but it gives me the same error I started getting when I tried installing 3.2 so I have decided to install that again and try and trouble shoot the problem.I get two error windows that pop up when I try and start my windows xp virtualbox, the first says:
Kernel driver not installed (rc=-190The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Please reinstall the kernel module by executing'/etc/init.d/vboxdrv setup'as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary.nd the second says:Failed to open a session for the virtual machine Sierra Designs - XP.The virtual machine 'Sierra*Designs*-*XP' has terminated unexpectedly during startup with exit code 1.etails:
Result*Code:
NS_ERROR_FAILURE (0x80004005)
Component:
[code]....
i want check md5 from win xp my friend use winMd5Sum it is good program ?
View 1 Replies View RelatedI was a Jaunty user and then updated to Karmic. Wireless went from being sporadic in Karmic to non-existent after I tried the wrong fixes. I've changed so many settings and tried so many fixes that I don't know which way is up with the wireless. I'd like to start from scratch. If I install from CD, will it just write over my current ubuntu partition? Will the contents of home stay intact or will everything disappear? Do I have to create a new partition?
View 2 Replies View RelatedI've recently installed Ubuntu 10.04 from a USB install. It worked very well for a few days, in which I hibernated at least once. Today, I hibernated Ubuntu again - But after powering up the ubuntu opened up fresh. In the same session I've installed GnomeBaker, and tried to use it - But it failed burning. A couple of restarts later Ubuntu stopped starting up - It doesn't even show the graphical ubuntu load screen, just quickly writes a lot of text, and the last screen contains a trace (I think), mounting errors, and the error "Target filesystem doesn't have /sbin/init.".
I have a BusyBox console (v1.13.3) with the cursor "(initramfs)". I found this post [URL]. In which transmutable describes the same problem I have, but I wasn't able to start into a live USB (or Live CD), and got error like the one described in the following post [URL]. My computer is Lenovo T410, and I'm dual booting Windows 7 32bit (Yes, there is a recovery partition - But Ubuntu worked before, so I reckon this is not the case).
I installed the normal recommended aptidue updates this morning. As a result of that, thunderbird is no longer starting:
/usr/bin/thunderbird-3.0
/usr/lib/thunderbird-3.0.3pre/thunderbird-bin: symbol lookup error: /usr/lib/libnssutil3.so: undefined symbol: PL_ClearArenaPool
I'm running a 64bit ubuntu, but 32bit firefox.
locate libnssutil3 | xargs ls -la
ls: Access to /usr/lib/firefox-3.6.11pre/libnssutil3.so not possible: No such file or directory
-rwxr-xr-x 1 dsc dsc 80328 2008-03-26 06:44 /home/dsc/Dokumente
[Code]...
I recently installed ubuntu 10.10 on my Acer Aspire laptop 5745G-7671 laptop. It has an Nvidia Geforce gt 420m dedicated card, and an Intel HD integrated GPU. The problem is, I recenly installed a driver for it (because ubuntu had already found a driver in hardware management). After I did that, everytime I try to start ubuntu, I can no longer see any GUI interface.I have tried everything. I tried restarting X (which doesn't seem to work in Ubuntu 10.10, and tried holding CTRL+ALT+F7 too, but it just displays a few "[ OK ]" messages.
View 1 Replies View RelatedI'm using Ubuntu 10.10 server edition on AMD 64-bit machine. When I try to open system monitor(system->administration->system monitor) it's not starting. Then i use console to open system monitor using command #gnome-system-monitor then it gave me the following error on the console.** (gnome-system-monitor:19279): WARNING **: SELinux was found but is not enabled.
*** glibc detected *** gnome-system-monitor: malloc(): memory corruption: 0x0000000000881d80 ***
======= Backtrace: =========
/lib/libc.so.6(+0x774b6)[0x7f1ec27054b6]
[code]....
The Grub Windows XP selection only gets "Starting ..." and then, nothing. Ran boot info (ref. below)
Updated Grub:
$ sudo update-grub
Searching for GRUB installation directory ... found: /boot/grub
Searching for default file ... found: /boot/grub/default
Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst
Searching for splash image ... none found, skipping ...
Found kernel: /boot/vmlinuz-2.6.32-31-generic
Found kernel: /boot/vmlinuz-2.6.32-30-generic
Found kernel: /boot/vmlinuz-2.6.31-23-generic
Found kernel: /boot/vmlinuz-2.6.28-11-generic
Found kernel: /boot/memtest86+.bin
Updating /boot/grub/menu.lst ... done .....
I'm trying to install VMware 7.1.3 on ubuntu ( 2.6.38 ) but I ran into some problems. I installed a patch -> link to instructions
But when I try to run vmware workstation the GUI doesn't show up. This problem is also descrbied on the same site (link) They say: "This seems to be a problem with glibmm-2.28, downgrade glibmm to 2.24.2.1, and it should work."
I have no idea how to do this. Most sites refer to gtkmm..how to uninstall a previous version and how to install the correct version?
I'm trying to install 11.04 natty on an HP Probook 6455b and failing.
Using two different burned cds I'm able to start the install process
1) I can get to the initial menu and interact with it to change command line options
2) I can boot the kernel and see services trying to start
At some point the system hangs and I suspect because upstart is starting services in parallel the console messages aren't showing the same consistent point for the hang.
with my last run using --verbose on the command line the last few lines are:
* Starting bluetooth
* Starting configure network device security
* Starting configure network device
* PulseAudio configured for per-user sessions
saned disabled; edit /etc/default/saned
Another run I just did (with network cable unplugged) ended with the same but also
* Stopping save kernel messages
I should note that the Pulseaudio line's asterisk is red or orange, does that indicate anything?
Mostly I'm looking for suggestions on how I can further debug and diagnose this problem to resolve it.
The system previously ran 10.10 fine and runs Fedora 15 (which should have a very similar kernel level) with no apparent problems.
Probook 6455 = basic HP laptop with AMD Phenom II mobile processor, 6G of RAM, ATI 4200 embedded graphics, etc, etc. Nothing special really.
i have an issue with XBMC. I installed it from fedorajunkies.org and i think i installed all dependencies as well. However when i start XBMC nothing happens. So i tried from terminal and this is what i get:
$ xbmc
The XBMC_HOME environment variable is not set.
Fatal error encountered, aborting
[code]...
In a desperate attempt to overcome frequent crashing accompanied by XLog lines that suggest to me that Pulseaudio is the cause, I removed Pulsaudio from my Ubuntu 10.4(LTS) using Software Centre. Now I cannot start up Ubuntu but I can get to Terminal via the Recovery Mode. My question is how can I use Terminal to re-introduce Pulseaudio so that I may get back to where I was, albeit with the random crashes that I have had for many months?
View 1 Replies View RelatedI'm using Debian Wheezy last version with OpenBox (without Gnome) and i would like to start alsamixer to change the volume but, look what happens in my terminal, I'm using terminator:
rob@robgeek:~$ alsamixer
Error opening terminal: terminator.
How can I know the display resolution (e.g. 1280x1024 px) without starting X?I mean: let us suppose that /etc/X11 was renamed to /etc/x11. After reboot Debian starts in text mode only.
View 9 Replies View RelatedI have just installed the F13 XFCE spin on my netbook (Asus Eee 1000ha), and can't boot past where Plymouth is supposed to start. The message I get is below.
[Code]...
I have a problem after upgrade from F13 to F14. I used the DVD i386 Iso on my Netbook MSI Wind U100 but it's don't start. It's load the services and it's stuck in the Fedora logo. I boot into Runlevel 1 to see the logs but there is no error. Then I run init 5 and it's stuck after the service ATD load. I don't want to do a clean install.
View 4 Replies View RelatedCan't install linux on PC. Get the massage "Starting udev... udevd-work[137]: 'sbinblkid -o udev -p/dev/tmp-blo k-7:14' unexpected exit with status 0x000b.
View 3 Replies View Relatedafter the third time downloading the netbook and installing to sd and or usb i decided to check the md5 but where is the md5 the new download pages bites.. wheres all the mirrors/ the new desighn is a good at waisting space //wheres the md5? bring back ftp style downloads?
View 2 Replies View RelatedI have a fresh installed debian server.
I am not sure if an FTP was installed or not.
How can I check that?
i have installed mysql and its running fine. how i can stop mysql from auto starting when i start my machine
View 2 Replies View RelatedI want to try the new 11.1. When I start the installation (x86_64 DVD), the startup is hanging. The last message is "Starting udev...". Keyboard is completely frozen, only reset button is working. Mobo is an Intel DG965WH with 4GB RAM and ATI Graphic card (ASUS1950pro). My opensuse 11.0 runs without any problems.
View 9 Replies View Related