Ubuntu Installation :: 11.04 Natty Hangs While Starting Services?
Jun 15, 2011
I'm trying to install 11.04 natty on an HP Probook 6455b and failing.
Using two different burned cds I'm able to start the install process
1) I can get to the initial menu and interact with it to change command line options
2) I can boot the kernel and see services trying to start
At some point the system hangs and I suspect because upstart is starting services in parallel the console messages aren't showing the same consistent point for the hang.
with my last run using --verbose on the command line the last few lines are:
* Starting bluetooth
* Starting configure network device security
* Starting configure network device
* PulseAudio configured for per-user sessions
saned disabled; edit /etc/default/saned
Another run I just did (with network cable unplugged) ended with the same but also
* Stopping save kernel messages
I should note that the Pulseaudio line's asterisk is red or orange, does that indicate anything?
Mostly I'm looking for suggestions on how I can further debug and diagnose this problem to resolve it.
The system previously ran 10.10 fine and runs Fedora 15 (which should have a very similar kernel level) with no apparent problems.
Probook 6455 = basic HP laptop with AMD Phenom II mobile processor, 6G of RAM, ATI 4200 embedded graphics, etc, etc. Nothing special really.
View 1 Replies
ADVERTISEMENT
Feb 11, 2010
I joined a company as an IT staff 2 months plus back. I now encounters a problem that the booting up hangs at the time when it is starting domino services. I have no clue where to look at and duno where to start checking. A little description of the server. : It's a lotus notes domino server for employees webmail service. -> Now it is down. it's an external dns server: recently high volumes of query cache denied surfaces. it's also our proxy server. The only way to get it up and running is to turn off domino service. The system is running still with high volumes of queries I last checked.
Althrough it can boot up now and DNS & proxy are running, I couldn't access the system anymore. It will hang when I attempt to log in from the command prompt. Below is an illustration:
iasaix login: root -> I attempt to log in using root user
password: xxxxxxxx -> I keyed in my password
-> The cursor comes down and just keeps blinking and nothing happens.
Remote access is not possible as it has sshd disabled by default. Our employees cannot access their webmail now, which is a major issue.
View 1 Replies
View Related
Jun 3, 2011
Today I've upgraded my Maverick installation to Natty using the "do-release-upgrade" command. The upgrade completed successfully according to the tool, but after I rebooted my system and chose "Ubuntu, with Linux 2.6.38-8-generic" in GRUB my screen went black showing an blinking underscore and rebooted after approx. five seconds.
When I entered the Safe Boot environment the last thing my system did before rebooting was attaching the SCSI devices but didn't show any error message.
Same with (successful) clean installation from Desktop-CD and Alternate-CD on a clean HDD.
After I upgraded I still had access to the "Previous Linux Versions" option in Grub, but when I started the Maverick kernel my system displayed a blinking underscore for about 30 minutes - until I shut it off. In the Safe Boot environment of the old kernel the "Failsafe X" option resulted in the blinking underscore again.
This happens with the final version, but also happened with the alpha and beta versions.
Ubuntu is the only OS on my PC.
I only tried this with the GNOME version of Ubuntu, but will try to use Xubuntu now.
View 9 Replies
View Related
May 12, 2011
Just upgraded to Natty on both my desktop and netbook. Desktop upgrade was a breeze, and I'm liking the changes.Netbook isn't having such a good time however.First login after upgrade (using default gnome settings) played the login sound and froze. No mouse movement/keyboard response. I tried again with Ubuntu Classic - nothing. Finally Ubuntu Classic No Effects did correctly boot/login. I allowed it to perform a proper shutdown (was doing a power flip beforehand), and it was able to boot into normal Ubuntu Unity.
I enabled the wifi module using the laptop's keyboard shortcut, and Ubuntu searched for nearby networks. After finding my prefered network, it started to connect and threw the system into a command console abyss and froze. Tried again on the Ubuntu Class no effects, and it freezes on connecting to a wifi network. If the laptop crashes and I have to perform a power cycle, I can't boot into normal Ubuntu mode. I have to go back into Classic no effects.
Details
OS: Ubuntu 11.04
Previous OS: 10.04 Ubuntu Desktop Edition
Laptop: Asus Eee 1001P
Wifi Network: WPA2/AES/PSK
View 3 Replies
View Related
Aug 11, 2011
I've just decided to downgrade from 64-bit to 32-bit Ubuntu. I created a live USB from the most recent (as of today) 11.04 download, booted up, and selected the option to replace Ubuntu. (Also on my HDD are a Windows partition and a shared partition for documents.)The installer hung at the timezone select page - and, foolishly, I hard-restarted the PC. I can get into 'try Ubuntu' without problems, but every time I try to actually install, it hangs. I can't boot into Windows, since GRUB seems to have been overwritten in my failed partial install. (I can get to a 'grub rescue' prompt, though.)
I suspected it might have something to do with my internet connection - I need to go through a university proxy script, so I'm not sure whether the installer will actually have internet access, even after I've been able to apply proxy settings while running Ubuntu from the USB.
View 1 Replies
View Related
Apr 29, 2011
I have an i5 sandy bridge PC with a gigabyte H67M mobo. I have been running maverick amd64 till yesterday. On maverick graphic acceleration didn't work so I decided to upgrade. After upgrade my computer hangs during bootup (with ubuntu logo on screen). I cannot see messages on screen, wasn't ESC key for that? Live CD seems to boot but also hangs computer after loading purple login wallpaper before login dialog is shown. To me it seems a graphic card regression issue since intel mobo graphic card wasn't working fine on maverick too. Also tried to manage with fail-safe graphic mode but this also hangs computer. Is there any log where I can see errors during last bootup from maverick live-cd?
View 9 Replies
View Related
Dec 21, 2008
I want to try the new 11.1. When I start the installation (x86_64 DVD), the startup is hanging. The last message is "Starting udev...". Keyboard is completely frozen, only reset button is working. Mobo is an Intel DG965WH with 4GB RAM and ATI Graphic card (ASUS1950pro). My opensuse 11.0 runs without any problems.
View 9 Replies
View Related
Jun 5, 2010
I've been using ubuntu for a couple of years rather successfully on my dual-boot Vista/Ubuntu. It upgraded to 8.0(4?) LTS, 10.04LTS and I kept it there until this afternoon I followed the instructions on the ubuntu site to open up a terminal and update-manager --somearg to provide me with a nice little "Upgrade" button on the update manager. I clicked said button per the instructions, let it do it's downloading and whatever else it does. The last step of the installation is a system reboot. I let it do that, and then my grub menu comes up as more-or-less this:
Code:
Ubuntu 10.04 LTS, kernel 2.6.32-32-generic
Ubuntu 10.04 LTS, kernel 2.6.32-32-generic (recovery mode)
Ubuntu 10.04 LTS, kernel 2.6.24-28-generic
Ubuntu 10.04 LTS, kernel 2.6.24-28-generic (recovery mode)
Ubuntu 10.04 LTS, kernel 2.6.22-14-generic
Ubuntu 10.04 LTS, kernel 2.6.22-14-generic (recovery mode)
Ubuntu 10.04 LTS, memtest86+
Other operating systems:
Windows Vista/Longhorn (loader)
If I select the top one, I get:
Code:
Starting up ...
with a blinking cursor under the S for a LONG time (used the power switch after ~40 mins). I tried the second 2.6.32-32 option for recovery mode. It spit a bunch of gibberish to the screen for a couple seconds and then stopped, presumably doing the same thing, just with 100% more gibberish. I tried booting into Vista, that worked fine. Just to reiterate, I've not yet seen a 10 LTS login screen or desktop, and can't get one yet (just a "Starting up ...") Just to add, I did try searching, but since the only info I had to go on was 8 LTS to 10 LTS upgrade, and "Starting up ...", well those are just hard keywords to get any meaningful info.
View 9 Replies
View Related
Jul 12, 2010
Basically services aren't starting up, like cron, VBox, ssh. I suspect a problem in the boot process, but I don't know where to look for errors with init or upstart or whatever it is these days.
View 5 Replies
View Related
Sep 29, 2010
I have a server running 64bit lucid and while trying to get a script to run on boot to start Davmail I appear to have broken something. I have webmin installed but I have been trying to do the majority of things via the command line. I now have davmail starting at boot but a lot of other services don't start anymore, including apache, mysql and webmin. Fortunately SSH still works and I can start apache and webmin from the command line without any problems.
View 1 Replies
View Related
Nov 18, 2010
Fedora 14 is freezing while starting services. what I know is that the system is passing kernel verification. Is there a way to choose which service to start during bootup?
View 3 Replies
View Related
Feb 20, 2011
I had a hard drive failure and have recovered (rsync) my backup root filesystem onto a new drive. This all seems to be fine, except that at least two services no longer start: mysql and apache2.I can start successfully both through
Code:
sudo /etc/init.d/mysql start
sudo /etc/init.d/apache2 start
although mysql throws a warning about Upstart. Neither start automatically.My system is Ubuntu 10.04.1 LTS x86_64. Part of my reolution actions has involved a kernel update to 2.6.32-27-generic.I have tried to resolve the mysql issue first:
Code:
sudo update-rc.d -f mysql remove
sudo update-rc.d mysql defaults
Code:
sudo apt-get remove --purge mysql-server
sudo apt-get install mysql-server
adding them /etc/init.d/... start commands to /etc/init.d/rc.local script and to a session startup script
checking the services are in rcX.d (using bum and sysv-rc-conf) Ensuring there's a .conf file in /etc/init (which there is).I can't see anything in syslog which would suggest if the system has tried to start these but failed, but then I may be looking in the wrong place. I think they're not starting at all. I wonder if it's something to do with the restore, perhaps symlinks?
View 4 Replies
View Related
Aug 5, 2011
Chkconfig is a utility to update and query runlevel information for system services. Chkconfig manipulates the numerous symbolic links in /etc/init.d/, to relieve system administrators of some of the drudgery of manually editing the symbolic links.
In Debian, there are several tools with similar functionality, but users coming from other Linux distributions will find the tools in this package more familiar.
Go to Terminal and open it and type the command "chkconfig' press enter. code...
after installing just type "chkconfig"
you can see list of service which one is off or on in your system code...
View 1 Replies
View Related
Mar 31, 2009
I am running a server init3.During boot I would like to start some services inside screenie. IRC chat, rtorrent etc.How do I do this?
View 1 Replies
View Related
Apr 16, 2010
I would like to create an alternative booting possibility in my GRUB menu that does not start some services (listed by chkconfig) like cups.
I would use this boot during travel where I surely does not need these services and shorter bootup time is preferable. Permanent removal of such services is not an option because I could not miss them during normal daily work.
I use Mandriva 2010 with the latest updates.
View 1 Replies
View Related
Oct 25, 2010
I installed an LAMP Server on 10.10. Additionally a simple Sambaserver and a VPN is integrated. Since 3 days I look at some strange behaviour:
Code: sudo init 6 does not take effect. Nothing happens. Code: sudo reboot is working, but all seems to be so ropy. It takes a significant while, before ssh-session is finally terminated. After the system comes up again, the vpn-client gets not the same IP-address by DHCP-server, but the next following of dhcp-range. That is strange, because no other dhcp-client is busy. After a second reboot I get the correct first IP-address of the dhcp-range. That is reproducible.
cron is not working any more. None of my jobs is being triggered. Nothing is logged in /var/log/syslog any more. Services (apache2, mysql, smbd) are not running at the start. I have to run them up manually. Seems like init is somehow smashed? What is your guess? What futher information do I have to provide for analysis?
View 2 Replies
View Related
May 9, 2010
so my server is doing fine, but there is one odd thing I would like to fix. When I start and stop services, the CPU is maxed out for about five seconds each time. The services start the same speed, but it still does this. Small things like lm_sensors don't do this, just things like httpd and sendmail. THis server was upgraded to Fedora 11 with a netinstall CD a few months ago.
View 4 Replies
View Related
Jul 2, 2010
New Intel x64 system installed with Opensuse 11.1 (like the KDE 3.5 option) and has been running well until today. Booting stops at "starting jexec services". Even while booting under "failsafe" system halts at "starting jexec services". Unable to boot to command prompt to attempt repair. Ran "repair" option from install disc with no good results. Still will not boot past jexec services.
View 2 Replies
View Related
Jun 10, 2011
Last time I installed the ATI graphics driver on my PC, it was'nt working fine so I uninstalled that driver. I restarted the PC after uninstalling the driver but then, when PC boots and start running the services the screen just hangs and I don't get into the desktop.
I tried to run the xfs service using service xfs restart and also gdm service using service gdm restart, but in both the cases it shows that Unrecognized Service. So, I think it means that the package for xfs and gdm service is not available in my PC. Is that so?
I tried to get into the desktop by running startx but it gave the following error :-
Fatal Server Error: no screen found
consult the fedora project support at [URL] for help.
check the log file at "/var/log/Xorg.0.log" for additional information.
giving up
xinit: connection refused (errno 111): unable to connect to X server
xinit: no such process (errno 3): server error.
View 1 Replies
View Related
Sep 13, 2010
I cant start Nfs services. When I type the comman /etc/init.d nfs start I get "Not starting NFS client services - no NFS found in /etc/fstab/. I used yast to install nfs server already
View 9 Replies
View Related
Apr 29, 2011
Unison-gtk on a new 11.04 machine talking to a 10.10 machine hangs. It never connects to the rsync over ssh to the destination 10.10 machine.
View 9 Replies
View Related
May 14, 2011
When I boot Ubuntu 11.04 it goes as far as showing me the OS options (I dual-boot with Windows7) and then what should be the login window. However - here it displays the mouse and nothing else. It just hangs. I can hit ALT-F1 and get a shell. I login and everything works as expected except X isn't running.
BACKGROUND: I tried to upgrade from 10.10 when (mid-upgrade) my computer turned itself off (suspect housemate unpluged it by mistake and then it ran out of battery). When I turned it on again, it refused to boot, complaining that the / drive was not there. After a bit of digging around I found that it was actually mounting / with read-only permissions. After remounting it with read/write permission I was able to continue with the upgrade. HOWEVER, I never managed to connect to the wireless from the command line (I tried all sorts, sudo iwconfig wlan0 essid "eduroam", sudo dhclient wlan0). Since it hadn't finished to download the new packages, I don't know what it did (presumably installed the ones it did have). Anyway, after doing this I rebooted and everything seemed to work - I logged in and (using update-manager) did a partial upgrade which seemed to work. The only problem was that it was now complaining that nautilus was not configured and for this reason it could not update a package called libglib2.0 or something like that. I tried to repair broken packages/reinstall nautilus etc nothing worked. I then rebooted (I don't remember why I thought that would be a good idea). Since it hasn't given me a GUI login window again. It just hangs, like I said.
View 4 Replies
View Related
Jun 4, 2011
I have a home file server that I am trying to upgrade to natty 11.04. It was running 10.04 and was behind on updates due to lack of an internet connection for several months. I didn't have any problems applying all updates (sudo aptitude update; sudo aptitude full-upgrade) and then upgrading to 10.10 (sudo do-release-upgrade). I applied all updates to 10.10 (sudo aptitude update; sudo aptitude full-upgrade) without any problems.
However I encountered problems trying to upgrade to 11.04.
Running:
Code:
Hangs indefinitely. I don't receive error messages, it just sits there. I have to escape from Screen and 'sudo screen -wipe' to try anything else.
I tried changing my repository list to point to a different mirror, but no change.
If I had error messages I would have more to go on, but at the moment I'm stuck.
View 1 Replies
View Related
Feb 9, 2010
I don't exactly when this started, but I hadn't booted my mythbuntu box for a while. When I boot it now, it hangs after grub at 'Starting Up...'. I was running 9.10 64bit, with 4GB Ram installed on an AMD64 3700+ ASUS A8N5X mobo. How can I resolve this? Can I modify boot options by hitting the Esc key before grub? What options should I use? I made no changes myself, it just happened on the next reboot. I hope that I won't have to burn a livecd. I only say that because the only machine that I have with a decent burner is my 9.10 box.
View 6 Replies
View Related
Jul 6, 2011
When I click on fullscreen (.....) PC hangs completely. I need to hard reset it. This is happening almost everyday.
Tried deselecting the hardware acceleration but no improvements.
Even in window mode flash is making the system very shaky.
Using FF 5.
View 9 Replies
View Related
Nov 4, 2010
I did a fresh FC13 install on a computer and after trying to install the nvidia drivers the machine hangs on starting atd when it boots.Initially, I tried to install the nvidia drivers with yum but it didn't work. The nvidia module was not loading and although I blakclisted the nouveua driver the machine was still picking it up. Anyway after spending a lot of time trying to find a solution online, I decided to download the drivers from nvidia and install it myself.So I did that, run sh <nvidia-package>.run and the installation was completed without any complaints. Since then the machine hangs when I booted it up. Also I don't see any errors in var/log/messages or in /Xorg.0.logHere is my grub.conf:
Code: default=0
timeout=0
splashimage=(hd0,0)/grub/splash.xpm.gz
[code]....
View 2 Replies
View Related
Aug 17, 2009
Running kernel-PAE-2.6.29.6-217.2.7.fc11.i686
Boot hangs on 'starting atd'
Select 217.2.3 and it boots OK.
View 11 Replies
View Related
Apr 3, 2010
I just installed the LAMP server on my system then rebooted, expecting the daemons HTTPD, MYSQLD, FTPD, etc. to start. When they didn't, I didn't panic I just attempted to run "sudo service start httpd". Surprise, suprise - "command not found". how do I start these daemons?
View 9 Replies
View Related
Aug 29, 2011
When I want to start nfs services ,I get this error, Starting NFS daemon: [FAILED]
View 1 Replies
View Related
Jul 25, 2010
I'm trying to install OpenSuse 11.3, everything went fine untill last step : configuring hardware. So my install hangs up at the point "starting sound card" (well it is in french, but it should be this translation in english). My sound card is a classical realtek hd audio card (from a laptop toshiba x200). In the terminal(/dev/tty1) I can see that it is hanging at Starting Yast2. I had no pb with my previous installs regarding the sound card (with openSuse 11.2 and earlier). what to do to have this step working, or at least have the sound card not started at this point.
View 1 Replies
View Related