Ubuntu Installation :: GNOME System Monitor Not Starting On 10.10?
Jan 29, 2011
I'm using Ubuntu 10.10 server edition on AMD 64-bit machine. When I try to open system monitor(system->administration->system monitor) it's not starting. Then i use console to open system monitor using command #gnome-system-monitor then it gave me the following error on the console.** (gnome-system-monitor:19279): WARNING **: SELinux was found but is not enabled.
*** glibc detected *** gnome-system-monitor: malloc(): memory corruption: 0x0000000000881d80 ***
======= Backtrace: =========
/lib/libc.so.6(+0x774b6)[0x7f1ec27054b6]
[code]....
View 2 Replies
ADVERTISEMENT
Sep 26, 2010
since a few days (maybe one week and after an automatic upgrade), I could see a strange behavior of gnome-system-monitor. After a boot, everything is normal. But if I log-out, and then log-in again, the problem begins. Impossible to close the gnome-system-monitor window (by clicking on the window upper-right close button). I have to terminate the process. And this process takes about 50% of CPU. In the same time, a dbus-deamon process takes the other 50%. When I terminate gnome-system-monitor process, the CPU use drops down to 6%.
View 5 Replies
View Related
Aug 10, 2010
I just installed 11.3 in one of my computers and I've noticed the resolution was sometimes changing after a reboot. First it was switching from 1280x1025 to 1024x768 with the default deivers, then I thought installing Nvidia propietary drivers would solve the problem, but now is switching between 1280x1024 and 640x480. After several attemps to fix it I found out that the system uses the correct resolution if it starts with the monitor switched on, but falls back to 640x480 if it's off when the system boots, which is almost always since I usually control this pc trough vnc.
I Tryed to specify the available resolutions in xorg.conf, and adding the preferred mode option, but it didn't help. I tryed also to use xrand in .profile to force 1280 resolution, but it doesn't work either (when the system is started with monitor off, xrand only shows 640x480 and 320x240 as available resolutions, and so does the system preferences panel).
Here's the xorg.conf I'm using right now:
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:59 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
code...
View 7 Replies
View Related
Apr 22, 2010
Does anybody know of a good alternative to gnome's system monitor? If you know of one; can you give me a link to the site?
View 4 Replies
View Related
Aug 17, 2011
I'm using ubuntu 10.04. After update to 2.6.32-34 kernel gnome-system-monitor craches(sometimes freezes) when switching to processes tab.
kernel.log :
Code:
Aug 17 15:14:26 evaliauka kernel: [11308.858611] BUG: unable to handle kernel paging request at fffffff3
Aug 17 15:14:26 evaliauka kernel: [11308.858617] IP: [<c024d582>] vma_stop+0x12/0x30
Aug 17 15:14:26 evaliauka kernel: [11308.858623] *pde = 00855067 *pte = 00000000
Aug 17 15:14:26 evaliauka kernel: [11308.858626] Oops: 0000 [#3] SMP
Aug 17 15:14:26 evaliauka kernel: [11308.858629] last sysfs file: /sys/devices/virtual/net/tun0/statistics/collisions .....
But:
Code:
sudo gnome-system-monitor
works fine and shows all processes (owned by root and by my user evaliauka)
View 9 Replies
View Related
Feb 2, 2010
I`m running openSUSE 11.2, with GNOME 2.28 - made a fresh install.
Everything went smooth and nice, and I did not made any changes to my system, when I saw that GNOME System Monitor freezes when clicking on the "System" tab.
View 6 Replies
View Related
Jan 11, 2010
9.10 Problem with Graphics/3D and other I have a Thinkpad T42, 1.7GHz, 1Gb Ram and a Radeon 7500 Graphics card. Everything that I am having trouble with works just fine in Ubuntu 9.04(except for the sound). There are two problems that I think are linked or really the same. First off, When I turn off Compiz(Compiz works by default) then gnome-system-monitor does not work properly. At least the graphics side of it; the window appears black with random lines running threw it. The same thing will happen to Gnome-do if Compiz is off.
The second problem is getting 3d support to work. I installed and tried to run blender and I got this from the terminal:
[Code]...
Then it ether does not open or the computer locks up completely and I have to force a shutdown. Which ever one it does I do not get my desired results. When trying to do chess in 3D it tells that I have 'No Python OpenGL support'. So I install the python-opengl package from the repositories; the program now just errors on start and I had to uninstall python-opengl to get Chess to work again. I have tried all this with Compiz on and off with the same results. Anyways thats about it, unless somebody knows how to setup the sound so a program won't lock it from other, then thats all I am having trouble with.
[Code]....
View 3 Replies
View Related
Nov 4, 2010
the gnome-system-monitor in fedora 14 do not sho the distributionrelease in the system-tab. The place for the distribution release is empty.
View 7 Replies
View Related
Nov 4, 2010
can anyone please tell me which package provides the gnome system monitor applet (the one which can display cpu load and disk I/O in the tray)?I run XFCE on F14/x64 and would like to display it using the XfApplet.
What i've tried already:
*) Installed the "GNOME Desktop Environment" --> Nothing changed
*) did a yum provides "/usr/lib64/bonobo/servers/*" to check which packages are providing applets - didn't found anything which sounds like the system monitor applet
The XfApplet shows up a bunch of available applets but not the system monitor ...
View 7 Replies
View Related
Aug 1, 2011
Since one of the recent updates, I cannot close the System Monitor anymore. Opening it, no problem. All processes are listed just fine and I can force close anything that gives me trouble but... When I want to close System Monitor again, nothing. Qtrl + Q, the X close button at the top right, Alt + F4... all do nothing. And although each time I see some disk activity, there is nothing in the logs.
Another thing I notice is that both dbus-daemon and gnome-system-monitor use about 40% CPU time each, taking the system to 100% CPU usage all the time.Luckily, I have System Monitor open so I can select the process gnome-system-monitor from the list and hit Terminate Process. I did not find anything about it in these forums. Anyone noticed this too or am I the only one?
View 2 Replies
View Related
Jul 11, 2010
In the gnome-system-monitor, on the "Processes" tab in the "View" menu, I should be able to choose between "Active Processes", "All Processes", and "My Processes". The chooses are all greyed out and I am only able to view "My Processes".I launched the app as root and had the same lack of choice.I also disabled SELinux and rebooted the machine.
View 4 Replies
View Related
Sep 23, 2010
I've recently installed Ubuntu 10.04 from a USB install. It worked very well for a few days, in which I hibernated at least once. Today, I hibernated Ubuntu again - But after powering up the ubuntu opened up fresh. In the same session I've installed GnomeBaker, and tried to use it - But it failed burning. A couple of restarts later Ubuntu stopped starting up - It doesn't even show the graphical ubuntu load screen, just quickly writes a lot of text, and the last screen contains a trace (I think), mounting errors, and the error "Target filesystem doesn't have /sbin/init.".
I have a BusyBox console (v1.13.3) with the cursor "(initramfs)". I found this post [URL]. In which transmutable describes the same problem I have, but I wasn't able to start into a live USB (or Live CD), and got error like the one described in the following post [URL]. My computer is Lenovo T410, and I'm dual booting Windows 7 32bit (Yes, there is a recovery partition - But Ubuntu worked before, so I reckon this is not the case).
View 2 Replies
View Related
Nov 3, 2010
I have a problem after upgrade from F13 to F14. I used the DVD i386 Iso on my Netbook MSI Wind U100 but it's don't start. It's load the services and it's stuck in the Fedora logo. I boot into Runlevel 1 to see the logs but there is no error. Then I run init 5 and it's stuck after the service ATD load. I don't want to do a clean install.
View 4 Replies
View Related
Jul 22, 2010
I have linux in my system with windows (dual boot). Now when I start my PC. It shows me only Linux, in splash screen. but when i press ENTER key on this. It starts in windows not in linux. And I completely unable to boot my system in linux.
View 1 Replies
View Related
Jul 18, 2010
Recently the power went when i was using ubuntu and my system shut down since the ups took too long to supply power. So i started my system and choose to boot linux, but it said display drivers not detected, linux running in low graphic mode, and it said 1. run windows in low graphic mode for now...2. reset to previous graphic mode- i chose this and it restarted, since then the ubuntu loading page appears and then my monitor goes blank although my processor is running.....why is this happening?.....i have a ati 5770 graphic card through which it should display.
View 3 Replies
View Related
Feb 23, 2010
I have persistent video tearing my second monitor (Mitsubushi HDTV). I have tried everything that was suggested with some improvement. I have no issue with tearing if I add the following to my xorg.conf
Quote:
Section "Extensions"
Option "Composite" "Disable"
EndSection
Is it possible to disable composite for one monitor only and keep it for the other. Or at lease is it possible to have compiz for one monitor only and disable it for the other.
View 2 Replies
View Related
Jan 11, 2010
I was wondering if i can remote desktop with my blackberry if i could install a program on my computer that would allow me to monitor a operating system install or even use my blackberry to install the operating system.
View 3 Replies
View Related
Oct 16, 2009
I am facing problem with the fresh installation of Fedora 11. (I have moved from Fedora 9). When I try to view videos on ..... or use the Cheese Webcam Booth, I get blurred lines on the screen and I am unable to see any video or pic.
Also I noticed that the when i go to System > Preferences>Display, it shows me UNKOWN MONIOR.
However, if I got to System>Administration>Display and enter the su password, it shows me correct monitor and the graphics driver.
I am not sure if my original is related to the Unknown Monitor.
I also tried to install Nvidia driver but it crashed the xserver and I had remove the driver.
My Monitor is LG 700E and Graphics card is from intel. as I am not able watch any video.
View 5 Replies
View Related
Nov 17, 2010
When booting the system ,"starting system logger : Failed" after that i login to the system as usual but the system logger cannot start,even i use the service syslog restart command,how can i solve such problem ,thanks a lot
View 1 Replies
View Related
Mar 11, 2010
I want to have a KDE desktop on my ubuntu OS, I mean that I want to have a switching system between Gnome and KDE! And I don't know how to do that?
View 5 Replies
View Related
Feb 21, 2011
Since a few hours I can't seem to get GNOME working. Whenever I boot my computer, I just get tty1 wanting me to log in. That works, but then I just get tty1 with a terminal... In tty7 I can see the startup checks which end with "* Checking battery state... [OK]".
View 2 Replies
View Related
May 3, 2011
Just updated my system to 11.04 and was not a fan of Unity. So I decided to switch to gnome 3. I downloaded all the packages and made the switch, only to realize I had made a HUGE mistake. While gnome 3 looks beautiful, it doesn't work at all for me. I have no internet (wired or wireless) now, and a host of other complaints.But when I try to restart Unity, the system fails. I also cannot start up Ubuntu in normal or Classic modes anymore.
View 4 Replies
View Related
Nov 13, 2010
I just installed GS following the instructions here:[URL]... and the classic way of getting GS to start at login (adding gnome-shell --replace in start up applications) doesnt work.
To start GS now we have to use the command "~/gnome-shell/source/gnome-shell/src/gnome-shell --replace" via the terminal adding that to start up doesnt work either, does anyone know how to get GS to start at login?
View 6 Replies
View Related
Jul 31, 2010
I've been having issues where I am running out of video memory on my ATI Mobility Radeon 5470 (latest Catalyst), and I would like to be able to examine what is going on with it.How can I monitor my video memory like how I can monitor my CPU and RAM with top or system monitor?
View 2 Replies
View Related
Apr 3, 2011
In System Monitor, on the File Systems tab, the "Total", "Available" and "Used" columns don't seem to add up, and the "Used" percentage doesn't seem correct either.
My config:
/dev/sda1 = 80 GB SSD drive, / partition.
/dev/sdb1 = 50 GB FAT32 partition of an external 500 GB USB hard disk.
/dev/sdb2 = remainder of the 500 GB USB hard disk encrypted using luks.
Screenshot: The /dev/sda1 figures don't really add up well, but they're close at least (how you get "50% Used" from any of those figures I don't know!).
However, for /dev/sdb2, they're miles off:
"Free" = 146.2 GiB
"Total" = 409.7 GiB
"Available" = 125.4 GiB
"Used" = 263.5 GiB
[Code]...
View 4 Replies
View Related
Mar 19, 2010
I have followed serveral sets of instructions for creating an installation media USB key from the DVD.iso for fedora 11 i386... Every time i have worked through the installation i get a very bare bones system...
why would this happen... i look through the usb key and can see packages for xorg and gnome etc... but they are not installed? do i need to specify somehow that i want a "full" install... so far i have selected something like "Install or upgrade system..." why are some "components" missing from my installation?
View 5 Replies
View Related
Jan 31, 2011
Isn't it possible to create a launcher to an application and in the command tell it to start minimzed?
Something like
vlc --minimize
Or something similar? this would be helpful to application on startup not crowding your desktop on login.
View 3 Replies
View Related
Feb 7, 2010
I ran an update after installing the OpenSuse 11.2 Gnome Live CD and could not start Gnome.Signing in would only get me a blank screen with wallpaper.Changing the display manager in /etc/sysconfig/displaymanager to kdm (from the default gdm) resolves this issue for me:DISPLAYMANAGER="kdm"
View 2 Replies
View Related
May 14, 2009
I deleted all the contents of the /tmp/ folder while X is running.rm -R /tmp/* Now the X is continuously restarting without showing the login screen. Is there any way to fix this
View 3 Replies
View Related
Sep 29, 2015
After my last package upgrade (Under Testing/Sid), gdm refuse to starts and immediately gives the Gnome message :
Oh no! Something has gone wrong. GNOME-shell
This error appears before I can choose this account to login. GDM or Xorg doesn't give any useful log.
After uninstalling nvidia non-free drivers, I'm now able to boot with nouveau.
Any way for having non-free drivers working again?
View 9 Replies
View Related
