Fedora Installation :: Plymouth Not Starting On Boot
Aug 11, 2010I have just installed the F13 XFCE spin on my netbook (Asus Eee 1000ha), and can't boot past where Plymouth is supposed to start. The message I get is below.
[Code]...
ADVERTISEMENT
Ubuntu :: Plymouth Manager Not Starting When Clicked On?
Apr 29, 2011I installed Plymouth Manager a while ago and have had no problems with it until now. I want to change my splash screen (it's currently set to the Macbuntu one), but it won't start up when clicked on. I have the Screenlet Sysmonitor, and it doesn't even show the process as starting when clicked on as if I did nothing. Running Ubuntu 10.10, Acer Aspire 5520.
View 8 Replies View RelatedFedora Installation :: 10 - Reboot At Starting Screen/Boot Loader
Apr 9, 2009I have a Laptop ( Samsung R510 Driton (Aura Series) with Win XP installed, and wanted to install fedora 10, too, as i really want to test a few things in linux and get a little knowledge there....
I Installed fedora with his guide: [url]
And as for Dual boot i also read this guide: [url]
I created root, home, swap (8 gb), usr, var all in all about 100 gb (i know its much, but i have enough space :)
After the installation, fedora wanted to restart my laptop, i let it restart and GRUB came up, i chose "fedora 10" pressed enter and the laptop just restarted....did the same thign again, andn ow fedora was about 2 secs in the loading screen and then restarted again....i've chosen windows and the laptop isj ust restarting...i tried windows again and windows is loading ....but i dont get in fedora 10....
Here are the specification of my laptop:
Quote:
Ubuntu Installation :: Plymouth Low Res Boot Screen
Apr 11, 2010I have searched the forums on this problem and I am still not really clear on the fix for this or even if I should wait for final release. I am running Lucid 64bit and have upgraded through the cycle from Karmic. I am using nvidia proprietary drivers. All the time that the Plymouth boot screen has been available it has been in low resolution. As we are now at beta 2 I am torn between searching a fix or waiting for the final release. So, from what I have read I need the 'nouveau' driver to fix this issue.
1. How do I install this in place of my existing nvidia proprietary driver?
2. I am a little bit confused by the hardware drivers selection panel telling me that I have an nvidia driver installed but that it is not in use-I read that this might be a bug?
Fedora :: Plymouth Txt Boot Hangs
Jul 28, 2010Whenever I boot fedora core 13 it starts Plymouth and a txt progress bar starts at the bottom. Whenever it gets to 100% it flickers a little bit then does nothing. The system doesn't hang I can still crrl-alt-delete and it shows the processes stopping. When it displays the programs starting it gets to jexec and nothing happens.
View 1 Replies View RelatedFedora Installation :: 12 Unstable During Boot / Crashed From Starting Udev To The Login Screen?
Nov 22, 2009Fedora 12 randomly crashes after a fresh install.Everything is left at its default during the installation except I install KDE and not Gnome.When I try to boot I hit esc at the splash screen to see where it hangs, but it never hangs at the same spot twice. Sometimes it hangs and sometimes it restarts. Its crashed everywhere from starting udev to the login screen.
I've been using kubuntu for the past year because I have the same problem with F10 and F11.
I dual boot with Windows 7 for games.
System specs:
Motherboard: MSI P45 Platinum
Processor: Intel Core 2 Duo E8500
Video Card: Radeon HD4850
Memory: 4GB (2x2GB) Patriot
HDD: Main: 250GB SATA Western Digital
code....
Ubuntu Installation :: Boot, Plymouth D Out Of Memory Nvidia Driver?
May 13, 2010Upgraded to 10.04 with proprietary Nvidia driver. No plymouth at boot, but dmesg gives error below. On shutdown get large plymouth display. Tried several hints but none work.
2.985912] 1179648 pages RAM
[ 2.985914] 951810 pages HighMem
[ 2.985915] 149486 pages reserved
[ 2.985916] 642 pages shared
[ 2.985917] 208097 pages non-shared
[Code]...
Ubuntu Installation :: Boot Failure After Upgrading And Subsequent With Plymouth
May 6, 2011She was running a script in R (which was supposed to take a regression from R and output to LaTeX) but it failed, causing a "massive core dump" and shut down her computer. She rebooted, performed a recovery, but her system was still running slowly so she decided to upgrade to Narwhal. At this point she received an error message saying that the upgrade was interrupted by an eclipse package, and it failed, saying that her (disk? she couldn't remember) "may not be recoverable." Now, when I try to boot from GRUB, from any kernel listed ($22, $25, $27, and $28 ), I get the following error message:
I booted from a LiveCD, and it worked (including the splash screen). I then scanned the hard drive with smartctl, and looked at it in Gparted. Nothing seemed amiss. I could open files stored on the hard drive from the LiveCD, so I think there is something wrong with the boot process but I don't know how to fix it. One idea I've got is to run Super GRUB Disk and see if that fixes my boot problems.
Fedora :: 12 Boot Crush After Plymouth Theme Update?
Jan 23, 2010I have a dual boot of fedora 12 and vista. Everything worked fine until I tried to install a new booting theme. Here is what I did:
su -
yum install plymouth-plugin-{fade-throbber,label,space-flares,throbgress,two-step}
yum install plymouth-theme-{charge,fade-in,solar,spinfinity}
[code]...
Ubuntu Installation :: Only See Recovery Kernels In GRUB2 After Plymouth Script - Can't Boot Normally
Oct 19, 2010I am using a Dell XPS m1330 with ubuntu Maverick 10.10 and with a Nvidia card. Recently I wanted to add plymouth support to my boot screens via this script: [URL].... but maybe i did something that ruined my pc and now, in GRUB, i can only see recovery kernels. The situation is this: in grub i see
linux recovery kernel 1
linux recovery kernel 2 (old one)
memtest
windows 7
My "normal" linux kernels disappeared. When I want to boot linux I use a recovery kernel, then I simply hit "resume" in the process, do the textual login and than use the command "startx" to start the system. However i'm getting no Plymouth and no normal boot. I have already tried to fix grub recreating the linux kernels, but they just don't show.
Ubuntu Installation :: The Screen Stops At Plymouth Theme Or Goes Blank After Loading Plymouth Theme?
Aug 3, 2011really wish to customize my GDM for ubuntu 11.4 but failed to do so.....therefore i decided to use alt. such as SLiM.....I could install it properly in virtualbox but when i went to do it on my real ubuntu 11.4 ......the screen stops at plymouth theme or goes blank after loading plymouth theme......then i read further more blogs and made changes and now even if i configure SLim the GDM starts no matter what i do .........
PS : I am new to ubuntu and dont have any knowledge about scripting programming and stuff....
Fedora :: Plymouth Graphical Boot Disappeared After Loading Nvidia Driver?
Sep 23, 2010I have successfully installed the Nvidia driver on my FC13 system that is using an Nvidia NV44 (Ge 6200) card. It seems to be working as I see the nvidia driver when I do a lsmod | grep nvidia and the glxgears program works as well as the nvidia-settings program.Basically, I did the following:
Code:
yum install kmod-nvidia-PAE
new-kernel-pkg --mkinitrd --dracut --update $(rpm -q --queryformat="%{version}-%{release}.%
[code]...
Fedora Installation :: How To Create A Plymouth Theme
Apr 29, 2009I search but I don't find an how-to or a guide for creating a Plymouth theme.I would like create my own plymouth theme, and not just replacing the background image.
View 5 Replies View RelatedInstallation :: Dual Boot - System Starting In Windows Only
Jul 22, 2010I have linux in my system with windows (dual boot). Now when I start my PC. It shows me only Linux, in splash screen. but when i press ENTER key on this. It starts in windows not in linux. And I completely unable to boot my system in linux.
View 1 Replies View RelatedFedora Networking :: VLAN Not Starting On Boot?
Jan 26, 2009I just have installed FC 10 on a box that I will use as a router/firewall box. On the box I have three interfaces (eth0, eth0.704 (VLAN), and eth1). When the machine boots up, only eth0 and eth1 come up. If I run /etc/init.d/network restart, then eth0.704 will come up. If I add that command to rc.local, then all interfaces come up at boot.
I have the directive ONBOOT=yes in ifcfg-eth0.704. What would cause this vlan interface not to start at boot on the machine?
Fedora Servers :: Vncserver Not Starting On Boot
May 21, 2009I am currently using FC10 on a Dell 4600 with 2GB of ram. I love Linux as it is the most stable OS around. My end goal is to have the machine boot and start the vncserver automatically, eventually using an ssh tunnel to make it secure. My main problem is the vncserver is not starting on boot, I must login as a user then it works great. the error I get is
[Code]....
Basically what happens is the vncserver fails on boot however, if I login to the Fedora box I am able to connect and I get the GDM login screen. I have read many, many posts but have not been able to get over the boot issue. I really want to make this a headless box I can put in another room so I have more room for my musical gear.
Fedora :: FC11 Boot Hangs On 'starting Atd'
Aug 17, 2009Running kernel-PAE-2.6.29.6-217.2.7.fc11.i686
Boot hangs on 'starting atd'
Select 217.2.3 and it boots OK.
Fedora :: DHCPD Service Not Starting On Boot
Jan 19, 2010I just installed F12 from scratch and I'm facing a curious situation with dhpd. The service is enabled, but It fails to start on boot. I see the following error on /var/log/messages:
Jan 18 17:15:28 neo dhcpd: No subnet declaration for eth1 (no IPv4 addresses).
Jan 18 17:15:28 neo dhcpd: ** Ignoring requests on eth1. If this is not what
Jan 18 17:15:28 neo dhcpd: you want, please write a subnet declaration
Jan 18 17:15:28 neo dhcpd: in your dhcpd.conf file for the network segment
Jan 18 17:15:28 neo dhcpd: to which interface eth1 is attached. **
However service dhcpd start, works just fine when I login, after the system boots:
Jan 18 17:26:49 neo dhcpd: Internet Systems Consortium DHCP Server 4.1.0p1
Jan 18 17:26:49 neo dhcpd: Copyright 2004-2009 Internet Systems Consortium.
Jan 18 17:26:49 neo dhcpd: All rights reserved.
Jan 18 17:26:49 neo dhcpd: For info, please visit [URL]
Jan 18 17:26:49 neo dhcpd: WARNING: Host declarations are global. They are not limited to the scope you declared them in.
Jan 18 17:26:49 neo dhcpd: Not searching LDAP since ldap-server, ldap-port and ldap-base-dn were not specified in the config file
Jan 18 17:26:49 neo dhcpd: Wrote 0 deleted host decls to leases file.
Jan 18 17:26:49 neo dhcpd: Wrote 0 new dynamic host decls to leases file.
Jan 18 17:26:49 neo dhcpd: Wrote 5 leases to leases file.
Jan 18 17:26:49 neo dhcpd: Listening on LPF/eth1/00:30:48:80:2e:7e/192.168.1.0/24
Jan 18 17:26:49 neo dhcpd: Sending on LPF/eth1/00:30:48:80:2e:7e/192.168.1.0/24
Jan 18 17:26:49 neo dhcpd: Sending on Socket/fallback/fallback-net
So it can't be a problem with my dhcpd.conf file.
Red Hat / Fedora :: Ethernet Interface - Starting On Boot?
May 15, 2011I recently installed Vortexbox, which includes fedora release 14.Got everything working, but could not access the network. After a bit of searching, found that "ifup eth0" activated the interface.To do this on boot, I have added this command, together with my "mount /dev/..." command in file /etc/rc.localIt works OK, but I cant help thinking there's a proper way of doing this?
View 4 Replies View RelatedUbuntu :: Plymouth Doing Nothing On Boot?
Dec 23, 2010I'm using Xubuntu 10.10, with 2.6.35-24-generic kernel. I'm 64-bit. If it helps at all, I'm using xorg-edgers, but that doesn't seem to mean anything here.My issue is that Plymouth is doing absolutely nothing on boot. I know this from using bootchart and seeing that Plymouth launches itself three times, but not seeing anything every boot. The only splash I do see is after I log in, the mouse thing, but that's XFCE.
So, how can I either remove Plymouth entirely, get it working, or find a better splash program? The reason why I ask how to get rid of Plymouth is because it may be entangled in some things that apt-get purge wouldn't fix.
Fedora X86/64bit :: F10 Boot Stops At Starting UDev
Mar 29, 2009I have done a fresh text-only installation of Fedora 10 on a Dell Dimension E521 for the purpose of setting up a server. After installation I ran yum update to bring the system up to date. After the update, I rebooted the computer, but the boot process froze. I recycled power and pressed "I" after the Dell BIOS screen and the GRUB bootloader appeared. I selected the most current version, edited the kernel line by deleting "rhgb quiet" and replacing it with "3." After making this change, I continued with the boot and the computer stopped at "Starting udev:" I have two fedora 10 revisions showing in the GRUB bootloader, the original installation and the update after running yum.
I repeatedly tried rebooting both versions and, after about 30 attempts, the computer finished booting and got me to the command prompt. Reading through the forums indicated there might be some issue with my nVidia GeForce 6150 onboard video and fedora 10. So, when I got to the command prompt, I followed the instructions in the forums [URL] to load the rpmfusion drivers. This appeared to be successful and when I looked at /etc/X11/xorg.conf it appeared to be correct for the new nVidia drivers. After loading these new drivers I tried rebooting. Unfortunately, I have been trying now over and over to get back to the command prompt, but simply can't get past "Starting udev."
Fedora Servers :: Starting Services In Screenie At Boot?
Mar 31, 2009I am running a server init3.During boot I would like to start some services inside screenie. IRC chat, rtorrent etc.How do I do this?
View 1 Replies View RelatedFedora Networking :: Starting WLAN0 On Boot Instead Of Logon?
Nov 4, 2009I would like to mount a bunch of folders/shares when I start my machine up. I will be adding the mounts into my /etc/fstab folder BUT my WLAN0 only comes "up" and connects to my WAP AFTER logging in.
how I get it to start on PC boot instead of log in?
I think I need to disable network manager but I'm unfamiliar with the procedure in Fedora
Fedora :: Dual - Can't Group Boot - Windows 7 Is Starting Always?
May 4, 2011I have got 160 GB hdd. I had installed Fedora 14 on 100 GB. After I had installed Windows XP beside Fedora 14. But I installed Windows 7 on Windows XP shortly before. This time, I can't group boot. The Windows 7 is starting always?
View 8 Replies View RelatedFedora Servers :: F15 Sendmail Service Not Starting On Boot-up?
May 29, 2011Just upgraded to F15 and I cannot seem to get the sendmail service starting at boot time.It starts and works just fine by hand after boot, so there's nothing wrong with the sendmail
configuration itself."runlevel" shows a current run level of 5 and "chkconfig" shows sendmail on for run level 5.All the other mail service (mailman, clamd, etc.) start fine.Doing "service sendmail start" after boot gets everything up and running just fine, but itsure would be nice to have it run at boot like it used to
Plymouth Works At Shut Down But Not At Boot
Jan 15, 2010I have Fedora (12 plus some rawhide, but mostly 12 because I am not up to date) with the Nouveau driver. I tried to switch to the solar plymouth theme, but I only see the ASCII progress bar at boot. But when I shut down, it work nicely. (I have updated to initrd and menu.lst)
View 2 Replies View RelatedUbuntu Installation :: Dual Boot Upgrade Hangs On Install Restart At Starting Up
Jun 5, 2010I've been using ubuntu for a couple of years rather successfully on my dual-boot Vista/Ubuntu. It upgraded to 8.0(4?) LTS, 10.04LTS and I kept it there until this afternoon I followed the instructions on the ubuntu site to open up a terminal and update-manager --somearg to provide me with a nice little "Upgrade" button on the update manager. I clicked said button per the instructions, let it do it's downloading and whatever else it does. The last step of the installation is a system reboot. I let it do that, and then my grub menu comes up as more-or-less this:
Code:
Ubuntu 10.04 LTS, kernel 2.6.32-32-generic
Ubuntu 10.04 LTS, kernel 2.6.32-32-generic (recovery mode)
Ubuntu 10.04 LTS, kernel 2.6.24-28-generic
Ubuntu 10.04 LTS, kernel 2.6.24-28-generic (recovery mode)
Ubuntu 10.04 LTS, kernel 2.6.22-14-generic
Ubuntu 10.04 LTS, kernel 2.6.22-14-generic (recovery mode)
Ubuntu 10.04 LTS, memtest86+
Other operating systems:
Windows Vista/Longhorn (loader)
If I select the top one, I get:
Code:
Starting up ...
with a blinking cursor under the S for a LONG time (used the power switch after ~40 mins). I tried the second 2.6.32-32 option for recovery mode. It spit a bunch of gibberish to the screen for a couple seconds and then stopped, presumably doing the same thing, just with 100% more gibberish. I tried booting into Vista, that worked fine. Just to reiterate, I've not yet seen a 10 LTS login screen or desktop, and can't get one yet (just a "Starting up ...") Just to add, I did try searching, but since the only info I had to go on was 8 LTS to 10 LTS upgrade, and "Starting up ...", well those are just hard keywords to get any meaningful info.
Under Nvidia Drivers - No More Plymouth Graphical Boot
Jan 8, 2010Since I've been using the nvidia drivers (from rpmfusion) and followed Leigh123's nvidia guide, I don't have a Plymouth graphical boot anymore. Instead I get the black screen and the blue/white bar at the bottom. I installed the plymouth-theme-solar (or whatever) and switched to that, updated initrd too, but no difference - same thing happened. This is an AMD64 system, latest kernel, latest nvidia drivers. Snippet of grub.conf:-
title Fedora (2.6.31.9-174.fc12.x86_64)
root (hd0,2)
kernel /vmlinuz-2.6.31.9-174.fc12.x86_64 ro root=/dev/mapper/vg_undertaker-lv_root LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet selinux=0
rdblacklist=nouveau
initrd /initramfs-2.6.31.9-174.fc12.x86_64.img
Plymouth Boot Screen Just Stays There - Can't Login
Jun 5, 2011This happens on boot on Fedora 15. Plymouth Boot Screen just stays there and I can't login. Searching around suggested kmod-nvidia to cause this (one moth ago ofc), but here I am with Intel Graphics and the default drivers.
View 6 Replies View RelatedUbuntu :: No Plymouth Theme On Boot / Shutdown
May 19, 2010I cant get a bootsplash image at all during boot/shutdown. Anyways I tried some solutions and kinda realized I dont have /etc/initramfs-tools/conf.d/splash. Could that possibly be it? And if so, how do I fix this. 10.04 Nvidia graphics Is there another solution to plymouth? I tried splashy and usplash wont install. So anyone else know a way.
View 1 Replies View Related