I downloaded the Ubuntu ISO file and burned it to a CD-ROM. Booting from the CD on my laptop I select the language and selection screen appears with all the F1-F6 options below. I've tried all the selections and options through the F keys but that's as far as the install will go. My laptop is a Dell and it's only 3 years old with plenty of memory and HD space.
View 3 RepliesI am currently running 9.10 ubuntu (gnome). I have a dual core intel chip at 3.00 ghz. My mobo is an ASUS P5ND2-SLI. My mobo will support up to 8gb of ram. Now, as we all know, 32-bit os/kernel will only support like 3.2gb, and 64-bit like 4gb. I'd like to install a pae kernel so I can get the most from my mobo, but honestly, I don't have a clue where to start looking for a pae kernel. I'd like to be able to select it from the list that already appears after the grub loads, and if I like it, be able to remove the rest from the list, or just make it default.
Question, in CPU-G, it says my architecture is i686. I don't know if that's the os/distro, or the kernel itself. it also lists the GCC version as 4.4.1 and Xorg as 1.6.4. my current kernel is Linux 2.6.31-22-generic. Again, I'm trying to find a pae kernel, but I don't know if my os/distro will make a difference, if the architecture is the kernel or os itself. I am still fairly new to ubuntu, and I must say, I've made the switch completely from windows.. which blows...
I recently removed Winblows Vista from my laptop and replaced it with Kubuntu 10.10 (I left the recovery partition on there, just in case). When I turn on the computer, the GRUB menu appears, I press enter, then a little flashing underscore appears on the screen in the top left hand corner. After a few seconds, the Kubuntu logo appears and I can log in.But yesterday I replace Kubuntu with Ubuntu 10.10. The Boot process is the same, but the little flashing underscore in the top left hand corner flashes for about 10 seconds longer then Kubuntu 10.10 did, and then a few paragraphs of text appears for a few seconds, then I am logged in automatically.Is this "unusual" boot process anything to worry about, or am I just being a noob.
View 1 Replies View RelatedFirst let me describe my system setup. I have windows, ubuntu 64 and ubuntu 32 present. I upgraded the 32 bit version to 10.4 with no problem. After upgrading the 64 bit version is when the problem occurred. I believe it has to do with the grub.cfg file. When I would choose the 64 bit version the screen would just go black, no furthur action. After making a few changes to the 64 bit selection in grub.cfg i come to a screen that says c to continue, s to skip mounting, and m for manual mount. Pressing s gets me in. Here is a copy of my grub.cfg.
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
[Code].....
Im using the following system setup: When I boot my business computer, I can choose between 3 setups, 2 Windows XP, 1 DOS. I installed Ubuntu with 1 Windows XP system which looks something like this:
System 1 (XP)
System 2 (XP) --> after selection, Im able to choose between the XP system and Ubuntu on a new screen
System 3 (DOS)
Now interesting for me is obviously System 2. After I select System 2, I can choose between XP and Ubuntu. After I select Ubuntu, I come to another screen, where I can choose again between 4 Ubuntu entries with different kernel versions (including their recovery modes) AND both XP systems (yes, again). I installed Grub Customizer. I removed all the XP entries and all but 1 Ubuntu entry from this screen. I also set the timeout until booting Ubuntu on this screen to 1 second to start as quick as possible and Ubuntu boots fine.
My question now is, is there a way to skip the screen with former kernel and XP selection and boot Ubuntu directly after already choosing (between XP and Ubuntu) on the first screen? I know, 1 second "waiting" is not too bad but skipping the screen completly would be superb.
I downloaded Ubuntu 11.04 yesterday. The ISO allowed me to install Ubuntu using Wubi and it worked just fine in Windows (I used a virtual drive to mount the ISO). I liked it enough to want to replace Linux Mint on the Laptop with it.After a LOT of trying, I was finally able to make the liveUSB of Ubuntu 11.04 32-bit version.[URL]isplays the boot menu and if I select 'try Ubuntu without installing', I am greeted with a blank screen which just does not go away until I hard reboot the system. Also, the grub I am getting is NOT the purple one which usually is the default; instead, its a dark screen with a black-n-white titled Ubuntu logo. So the question of using the NOMODESET doesn't arise at all. I am using Dell XPS 15 with dual OSes - Linux Mint and Windows 7. Both Mint and 7 are 64-bit OSes but I am trying to install Ubuntu 11.04 32-bit version.
View 8 Replies View RelatedUbuntu 10.04 I am dual-booting along with Windows. I need to change the order of boot options so that Windows is the automatic selection rather than Ubuntu. I cannot find the file to make the change and not sure what changes I should make when I do find it .
View 2 Replies View RelatedI have installed Debian a few times now (and other distro's), so I'm fairly used to installing linux. I'm not used to installing it on Apple hardware (back in 2009 on my laptop I had some issues that were solved rather quickly, but that's about it). Now I'm installing Debian Squeeze on a new (well, bought today, but it is the previous model: iMac 11,2) desktop iMac.
Installing goes well (resizing partition, rEFIt, booting Debian 6.0.1a netinstall CD, installing packages etc.) I followed a tutorial [URL] to install grub explicitly with force after installing and running gptsync. Everything went according to the tutorial and I rebooted to be welcomed by rEFIt and then grub: perfect!
BUT when I chose Debian in the grub-selection list, I only see a few lines of starting the kernel, and then my screen goes all black. A few seconds later I hear a sound, and iirc it's the sound of gdm prompting to select a user. I cannot switch to a TTY and I have to use the power-button to shut the system down.
i installed ubuntu 10.10 inside windows and when i boot ubuntu a grub screen appears what should i do?
View 9 Replies View RelatedI'd like to install Fedora 14 64bit as a dual boot on an existing win 7 32bit system. When I boot with the Live CD, after selecting "boot" in the Fedora boot selection menu, I get a grey screen with a white cursor, and the system freezes. I checked the Live CD on my laptop and it worked perfectly.
My System:
MotherboardASUS P5Q DELUXE
CPUIntel Core 2 Duo E6750, 2,66 GHz, Sockel 775
[code]...
1) Burned Ubuntu 10.10 to a disk, When tried to install (Select Install Ubuntu) screen goes blank with dim backlight and a blinking cursor on top. Same thing happens with Try Ubuntu without installing.. 2) Tried on Lenovo T410 and Dell 1330. issue exactly remains the same.3) Tried it on a VM Worksation 6.0, "This kernel requires an x86-64 cpu but only detected an i686 error is popping up". So thought its a Ubuntu x32 an compatibility, hence downloading the 64 bit now. Will burn and check it later.
Brand: Lenovo T410
Intel(R) Core(TM) i5 CPU M520 @2.40Ghz
BIOS: A1674IMS Ver 1.0L
[code]...
I downloaded a debian whezzy media after installation when the system begins to boot the system appears a white screen, and not from any error.
View 2 Replies View RelatedI install UBUNTU 1104 on HP Desktop PC, but now it doesnt start. Just appears a Black screen with this msg: Error Code = 1001.
I want reinstall but PC is not reading CD, But the CD drive is working.
I install UBUNTU 11 in other 6 PCs, and work fine.
PC inf.: HP Compaq dc5800 Small Form Factor
I never install Windows on this PC. The original OS was UBUNTU 9.04 and updates.
recently had to reinstall ubuntu 9.10....after all the updates & changes i made in synaptic and some restarts, i wanted to proceed in installing my nvidia drivers, so i stopped gdm and attempted to login as root, but it would not let me. it's strange because i created the root account password prior to this.
so, issuing the command to restart gdm brought me to the login window. after logging in, the screen remains in the login splash and a small terminal appears in the upper left corner. can't seem to get gnome started up.
when insert ubuntu 10.04 cd to laptop [xp] this run ok [run from cd], but when in desktop vista the screen of ubuntu appears bigger than screen dimension so menu does not seem, what is the solution?
View 6 Replies View RelatedI installed 10.4 on my Satellite Pro via CD replacing XP. Screen resolution is now only 800x600 which fills only 3/4 of available screen space and there are no greater options in System Preferences Monitors. It is also operating rather slower than the previous OS, maybe these two issues are connected? I have checked Administration for any required Proprietary Drivers. There is just one for a modem which is activated. During installation I aborted it then closed down and restarted, which may have affected the process?
View 8 Replies View RelatedI've tried to find it on google, but I want to have my OS Screen Selection to have a cleaner look than what it currently looks like. I understand we can edit Grub 2 but nothing I've found shows me what to edit into the file. I have all of the files I just need to know which one to edit and what to put into the file so my OS selection looks better
View 2 Replies View RelatedSo I have the burned ubuntu CD, and I'm attempting to install it on a system that has one HDD with XP/Vista on it, and another that is completely formatted and unpartitioned. However, when I boot to the ubuntu CD, I can use the menus from the bottom, and select the language when initially prompted, but I can't select any of the menu options except for boot from first hard drive.
View 1 Replies View RelatedHow can I change the behavior of the selection buffer or a program that uses it ( I have xclip) to not send me text until the mouse button is released while clicking and dragging? This causes havok in the software I'm developing that tries to make use of the selection buffer. I need the full selection, not bits more bits more bits and then the full selection.EDIT: I cannot listen for mouse events such as button release outside of the GUI of my program.
View 2 Replies View Relatedversion 10.04.copy and pasted something into terminal and now the theme selection menu always pops up at the login screen, how do i get rid of that?
View 1 Replies View RelatedWhen i click on "installation / Live Gnome CD" a screen appears then it disappears fast and i get a black screen
- I checked my ISO Hash & it should work without problems
- I tried several CDs / ISO " KDE/Gnome "
*-*-*-*-*-*-*
MS-7366 (version 1.0)
Processor : intel(R) Celeron(r) D CPU 3.06GHz
Memory : 3 GiB
Graphic Card : nVidia 8400 GS , 1 GiB
I'm moving from Ubuntu to Fedora 13 and note,to my delight, that ICEWM is an option. I much prefer that, or Joe's WM to the biggies like Gnome or KDE.the problem is how do I select ICEWM? I feel sorta stupid here. I see nothing on the menus or the control panel which applies and the splash screen is devoid of a selection. That leaves the command line. Have I missed something?Is there no GUI to do this with? How do I change to ICEWM?
View 5 Replies View RelatedEvery time I log in, a terminal appears on my screen. Previously, I attempted to embed a terminal as part of the desktop but I have deleted all the scripts and packages used, yet the terminal still appears. It is not an embedded terminal, but it does not have the panel at the top. It appears as a window on the lower panel of my screen. Is there anyway to stop this from appearing, so I can then attempt to start over with embedding a terminal in the desktop?
View 5 Replies View RelatedI've been working my butt off all day now trying to get the nvidia drivers installed and then (the hard part) get dual screen to work properly with them installed. Finally I've gotten to the point where both of my screens are working perfect but now the login screen is on the second monitor instead of the first monitor for some reason I do not know.
Here's my xorg.conf:
Code:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@crested) Sun Feb 1 20:25:37 UTC 2009
Section "ServerLayout"
Identifier "Default Layout"
[Code]....
Having trouble booting Ubuntu 9.10, it gets hung at the first screen where the Ubuntu logo apears. Right now I'm running my Ubuntu 8.10 Live CD.
View 7 Replies View RelatedI've recently done a fresh install of 10.04 on an Acer Aspire 5720 and it went pretty well. However I've a problem with the logon appearing twice. If I leave my computer idle for too long the screen locks. when I return I'm asked for my password which unlocks the computer but within a few seconds the screen locks again and I need to enter my password for a second time. This time the computer unlocks and stay unlocks.. but it's annoying I have to unlock it twice !
How can I extend the length of time before it unlocks or disable it all together.. until the problem gets fixed?
I have Ubuntu Studio, Ubuntu and XP in 2 HDs. I upgraded Studio to 10.04 and XP doesn't start anymore. I upgraded Ubuntu with and error in the GRUB and then just Studio was booting...With $ sudo mount -t ext4 /dev/sda2 /mnt $ sudo grub-install --root-irectory=/mnt /dev/sda I recover Ubuntu boot... but not XP...at last I removed completely the GRUB2 in the Ubuntu and Studio synaptcs...Now I have all the same but with GRUB 1.97 Ubuntu starts ok, Studio starts after an error message something like: dev/ no such device. and after choosing xp in the list all that appears is a black screen with an white I will post down the sudo fdisk -l and sudo gedit /boot/grub/grub.cfg
View 8 Replies View RelatedI have a Dell Vostro 200. Have been running Ubuntu on it for 18 months - no probs. Recently it became very slow to boot. 5-10 minutes before Ubuntu startup screen appears. Have installed Ubuntu 10.10 (on a reformatted hard drive) today. No change. It's fairly certain to be a hardware problem but I don't know where to start.
View 3 Replies View RelatedI installed Ubuntu 10.10 alongside my Windows 7 os in a dual boot config. I used an installation disk and allowed the ubuntu installer to do all the resizing of partitions, installing of grub, etc. The install is working great and I haven't needed to boot my windows os since which is great. The only complaint I have is that it takes it takes a bit longer to boot than windows did for some reason. The culprit is a blinking cursor that comes up and remains for about 12-15 seconds before the grub menu appears. I already altered the boot option for the grub menu so that ubuntu is default and the option to select another os only appears for 3 seconds but I don't think this is related since the delay occurs before those options appear. I'm not really sure what is causing the delay. Is it looking for the loader? If so, is there a way to edit the configuration so doesn't have to search? As I mentioned, the install is running great otherwise.
View 9 Replies View Related1: when im surfing the web and watchin vids....the screen appears jumpy? i think its a graphic card problem but i dont know were to find it.......or how to sort this!2: using skype i find that my mic dont work but my cam dose...when i use the sound recorder in the applications the mic works!!!3: i had a wireless symbol at the top on the panel but now its gone!!! any ideas where i can find it to put it back up there!!4:i instailed itunes using WINE but now i cant remove it due to the fact that everytime i chose uninstail it reinstalls!!? i want to remove it coz it is jumpy too!!!i aint too sure if my notebook has got to be modified to be able to use ubuntu 10.10 to the best it has to offer
View 5 Replies View Related