Ubuntu :: Choosing Xp In The List All That Appears Is A Black Screen With An White
Jun 9, 2010
I have Ubuntu Studio, Ubuntu and XP in 2 HDs. I upgraded Studio to 10.04 and XP doesn't start anymore. I upgraded Ubuntu with and error in the GRUB and then just Studio was booting...With $ sudo mount -t ext4 /dev/sda2 /mnt $ sudo grub-install --root-irectory=/mnt /dev/sda I recover Ubuntu boot... but not XP...at last I removed completely the GRUB2 in the Ubuntu and Studio synaptcs...Now I have all the same but with GRUB 1.97 Ubuntu starts ok, Studio starts after an error message something like: dev/ no such device. and after choosing xp in the list all that appears is a black screen with an white I will post down the sudo fdisk -l and sudo gedit /boot/grub/grub.cfg
I wanted to have some cool effects in my desktop and have just installed compiz fusion in fedora 11 (kde) but when i launch compiz fusion icon the screen just goes white and nothing appears.
I installed ubuntu 10.10 alongside Win7 recently, absolutely new to this OS.
Experiencing problems with firefox browser. A plain White blank screen appears only with the titile bar named Firefox. Actually when the web-browser icon is clicked, just a cursor BAR appears stuck inside the extreme left end of the screen (cursor bar something like the one we find in word processors or this blinking line while I type this). I manually have to expand the bar in order to get the firefox browser, which is the plain white screen.
Initially had problems with the missing wireless firmware, reading through this forum I activated the Broadcom driver. But before that, I wired in my laptop to the router and then FIREFOX worked fine, after an update which installed bout 214 updates the firefox got conked.
After succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e, 4 gig of corsair dual ram, ati 4850 graphics, onboard audio. ahci mode win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2, i had this configuration running fine for 2 months without boot loaders, on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
I am unable to boot my laptop in the usual way. The fedora emblem in the centre of the screen appears and starts to turn from white to dark blue in the usual way. When it is almost complete it stops.
In order to make the machine boot i hit escape and a message says leaving interactive startup mode. At this point the machine continues to start up.
When i do manage to get it to boot i get the following message repeated many times:
I should also add... The laptop will not close down, once i click switch off the screen turns blue and displays the fedora emblem in the centre. At the top right text says "Shutting Down" but at this point the system hangs.
I have 10.04 installed in a dual boot system with windows 7 pro on 1 desktops and one laptop. Also dual boot on a desktop with windows xp and Ubuntu 10.04. The two desktops run AMD processors and the laptop uses an Intel processor. On the two desktops after booting the screen will fade to black and white and then back to color. While in the black and white the computer is frozen. This happens using Firefox mainly and other programs. It never happens using my laptop with the intel processor. Does Ubuntu 10.04 have a problem with AMD processors? It does it so much it is hard to do anything with the and desktop computers, but I have never seen it happen on my intel laptop.
I 've recently installed UNR 10.04 Lucid Lynx in my old PC.
Specs: CPU Intel Pentium 4 2.66 GHz Mother ASRock P4i45GV R5.0 Chipset Intel 845GV w/ Intel Extreme Graphics (shared memory up to 64 / 256 MB -I don't really get which one-).
Nevertheless, when I start the Pc, Ubuntu loads and, when it's about to load the desktop, the screen turns black with white stripes and "turns itself on and off" (like when it receives no image). I don't really know if this is or not a graphic bug / problem, but it's quite strange, as I've used Ubuntu 8.10 and 9.10 before in that same Pc.
By the way, I get the same error with the normal Ubuntu Lucid. AND, I have a Win XP Professional SP2 installed (I've installed the Ubuntu afterwards, so I have the Grub as default bootloader).
Also, I get the same error when loading Ubuntu in LiveCD mode.
on a cold computer randomly appears black screen with white flashing stripes up to half of the screen preceded by a message "checking battery state... [OK]". - ubuntu 10.04 LTS
- desktop compaq evo d510 sff
- intel 82845G/GL[Brookdale-G]/GE chipset integrated graphic device keyboard is not active on that black screen, BIOS settings look OK
I am using a emachine w2925 desktop and I installed the newest ubuntu. And it randomly goes to a black screen with white bars vertically half way down the screen that flash between bars and a black screen every few seconds.
After suspending my laptop, and then resuming the screen has black and white jagged wide zig zags across the screen. I can move the mouse and login fine, it's just the graphics are all screwed up. Has anyone had this problem before? Is this X? Is it a driver issue, my info is in my sig.
I am not sure but i think I have had a HardDrive failure of some sort.
When I boot up I get a black screen with white letter saying the following:
Code:
Does anyone know if there this is a HardDrive failure or is it something else that I can try to fix? I have back ups of all critical data so a reinstall is possible but I would like to get some noncritical data out on my XP partition.
I insert my DVD into my machine. The little "waddya wanna do" window then opens, and I select "play in VLC." I then press the play option on the video menu (not the play button on the VLC controls). Then the VLC window turns black, or the part where the video is supposed to appear does, anyway. So double-clicking to get to fullscreen sometimes fixes the problem, but then I can only view it in fullscreen, not good. It didn't fix the problem this time, so I double-clicked again to get out of fullscreen. Then my whole display turns black and white. WTH? The display problem fixes on a reboot.
This happens on a regular basis when I try to play movies. My display is, right now, black and white. After I finish this post I'll restart my computer to fix the colors.Also, it should be helpful that when I move the VLC window or am going to/from fullscreen, I can see the movie for a split second, and in full color. The rest of the screen stays B & W, though.Also, for some reason, when I play a movie, VLC open two windows: one with the video, and the other with a visualization and a title bar saying "VLC (X11 output)"
I have here two old identical compaq pc's with 64mb ram.I want to copy drive/os from one machine to other. So i do a drive to drive clone (witn both hd's deing connected to another machine). And it says its done and okay. But the second (cloned) machine doesnt boot. And have the black screen with the blinking white cursor in top left corner. I have already tried to do fdisk /mbr and also copying partition table from original to destination disk. Because i think it is logical that with a drive to drive clone it sould be copied. But i have a doubt in that somehow. Because why would it not boot if it was copied then
I just installed Ubuntu 10.04 on an old Compaq desktop, and after working on it for a while, screen randomly turns blank, usually with flashing horizontal white lines. Can anyone help? Someone already told me to try memtest, which I already performed, but nothing happened.
I have a fresh install of 11.04 on my ThinkPad, and it is crashing to a black & white text screen unpredictably. I was able to find the following in the syslog, which looks similar to what I see when it crashes:
the power went off in my house for a split second but it was enough for my computer to die as such linux refuses to boot, i reinstalled ubuntu 3 times now and still nothing.. the only way i can get it to do anything regarding booting is if i have a windows xp install disc in the dvd drive. other than that, bios posts and then i get a pure black screen with a white prompt and it sits there i did however find the boot info script and ran it so here is the results:
have a problem with an Acer Aspire one running linpus linux. I get a black screen with a white mouse pointer at startup. I don't know how this happened. I can interrupt the startup process with ^c and then see the following amongst other text :Loading x11 FronEnd module...Failed to laod x11 FrontEnd moduleFailed to launch SCIM
My computer keeps having some kind of meltdown. i really cant explain it other than the screen will go black, and then it will start flashing like white bars, or different colored bars. this happens at such random times i cant exactly pinpoint what sets it off.
the only thing i may have a clue to is that in my update manager, there is one thing that is a distribution update that i cant check to have it installed or anything like that. its then "Gij" and its description is it is "the gnu java bytecode interpreter" i just dont know if i should just go back to an earlier form of ubuntu because these problems didnt start happening until i upgraded to the new ubuntu
I have ubuntu on my desktop - works great. The problem is I am trying to install it on my laptop. I have the image burned, and it's booting off my cd rom just fine. The problem comes after that. It goes to the ubuntu loading screen for a pretty long time, then after that the screen scrambles in random black and white box type things, at which point I get no response unless I hit the power button at which point a linux screen pops up and tells me it's waiting for programs to close, then boots down.
Once I select Ubuntu 9.10 from Grub, it shows the logo, the logo disappears, a jet black screen shows with 2 horizontal white dashes appear at the top.
I recently uninstalled Firefox 3.6 pre using synaptic to go with the stable Firefox 3.6 installed with the PPA repository that was given in the Ubuntu wiki. It installed and ran fine but when I rebooted, ubuntu wouldn't start.
I went into recovery mode a few times, tried to fix any broken packages and when it said it was fixed, I tried rebooting and the same error occurred. I also tried to use dpkg-reconfigure for the xserver-xorg and then ran startx but x didn't load properly. Some more debugging and a few driver errors came up involving intel so I installed a package which fixed that.
Ran the dpkg-reconfigure again and ran startx. This time x loaded but it was a jet black screen and I had to hold ctrl + alt and hit a few F keys to get back to the prompt.
I understand this could be a xulrunner error so I tried reinstalling xulrunner-1.9.1. I also rolled back my repositories to get the Firefox 3.5 branch and I installed the original Firefox 3.5, ran firefox --version to make sure and I finally have that back installed.
I tried rebooting and running the OS normally, but again it failed at the same point. What exactly should I do next? Yes, I could reinstall but it's such a small problem with maybe 1 or 2 broken packages, is there anyway I can save my current ubuntu system (as I have made countless configuration changes months ago and I do not want to do it again)?
i thought i would give ubuntu 10.04 a try. So i downloaded the iso twice from two differant sources and burned to 2 diff dvd with diff burners and get the same problem. When i boot off of the disk i get the menu but whether i choose install are run live cd it just sits there for a sec are 2 then goes to black screen with flashing white bar in upper left hand corner and thats all it does. even tried my 9.10 disc which i know works. but it does the exact same. I have purchased a new video card since i last ran ubuntu and its the nvidia gtx 260 core 216. would that be whats causing my problems?
Today brought some new updates. I did the updates and while not required I did a restart. Then it goes to a black screen with a solid white line in the top left corner (flashing). It does not boot. I held down the power button to shutdown. When I press the power button, I get the Dell splash screen, then it goes to a black screen with a solid white line in the top left corner (flashing). Nothing like this has happened before
I can't log into my normal user account anymore, though I can log in with root without any problem. When I enter my normal user name and password, the screen blinks, a black page appears and after a couple of seconds I get the login screen again. I deleted /tmp files but no changes. I tried to login using command mode. So I hit Ctrl-Alt-F1 and log into root in command mode, then ran init3, then switched user to my normal user and ran startx. It worked and I logged into my normal account, but I can not do this process every time. So, what is the problem? How can I solve this problem? I used to work with my normal user flawlessly. I installed a bunch of software and also copied some folders to my home directory, but I don't know whether these activities caused the problem or not. I'm using KDE4 under openSUSE 11.2.
I get past the count down. The bars run across the top. Then my lcd monitor announces it has no signal and goes to sleep. Had this problem with earlier versions of Ubuntu, particularly 8.04. Was fixed in 8.10.
I have re-installed Fedora 3 times, each time, after a little while of use, when I am botting it up, it loads up, and before the login screen appears, the screen just goes black, and I end up with just a black screen and a white line in the top left corner flashing, thus resulting in me not being able to log in. The exact same has happened a number of time
Could it be something I had installed? Also, whilst using it, on the third install, a few times a message appeared telling me there was a kernel error, could this be linked to the problem? I was running Fedora in GNOME, but I had KDE installed too.
