Ubuntu Installation :: Small Screen After Installing 10.4 On Laptop - No Greater Options In System Preferences Monitors
Jul 24, 2010
I installed 10.4 on my Satellite Pro via CD replacing XP. Screen resolution is now only 800x600 which fills only 3/4 of available screen space and there are no greater options in System Preferences Monitors. It is also operating rather slower than the previous OS, maybe these two issues are connected? I have checked Administration for any required Proprietary Drivers. There is just one for a modem which is activated. During installation I aborted it then closed down and restarted, which may have affected the process?
So, I have an old laptop that used to have windows/ubuntu until the drive got fubarred (no physical damage). I shoved the laptop as side as I didn't use it much anymore (it's an old, loud 2.4GHz desktop p4 in a dell--mostly toshiba--laptop. pcmcia atheros based wifi card and an ATI m6 graphics card. Laptop was new back in 2002-03 maybe).The Cdrom drive had died a while back, and it's not worth buying a replacement. The bios doesn't support boot to USB. What are my options for getting Ubuntu on there (9.10 preferably)? The drive has been formatted already, so there is nothing to boot into right now.
I can pull the drive and hook it up to my desktop (windows 7 machine only right now) via USB, and partition it from there, but I'm not sure how to get the installer on there. The MBR of the laptop drive will also have to be rewritten. Is there a way I can create a dos partition, load it with files, and start a linux install that way (maybe with grub4dos or something)?Or can I somehow boot into an ISO image on a partition?The only other thought I have is creating a floppy disk that will allow a network boot, but I haven't looked into that. I basically just want something to bring with on vacation that I can get online with. Browsing from the phone leaves a little bit to be desired.
I have to use alsa for audio to work under wine (otherwise pulseaudio starts eating up processor cycles and the audio comes out horrible and distorted), but I have been unable to use the mic. The mic boost is up on the alsa mixer, and they are not muted. I cannot find any options under my system menu for Sound Preferences (which seems to get references in a lot fo help forums), or anywhere else to determine which audio driver the line in on the front uses.
I'm using an Acer laptop from a couple years ago, so support should be no problem.
I'm having some trouble hooking my external flatscreen monitor up to my Toshiba Tecra's docking station and having Mint (or Debian) be happy with it. The laptop uses a widescreen monitor but my external is a 4x3; I wonder if this is causing problems. Of course, it may just be the Intel 82801G graphics adapter.et things up properly in the Display Preferences config window (I'm using Gnome, btw) but when I hit apply, the system locks and I have to hard boot. I've never set up a linux box with multiple monitors before, let alone multiple monitors that require different resolutions.
I have a problem with Lubuntu. First of all I installed it on my old laptop (amd sempron 1.6GHz, 512MB ram, s3g vga) as windows seemed to slow down my system. Installation was good, but the problem is screen resolution which is only 800x600 and there is no higher res option. Laptop's native is 1024x768. I searched a lot about how to change it but there is no post for lubuntu (everything is for ubuntu, xubuntu, and doesn't seem to work in here). Beyond that isse i I feel Lubuntu is running much better than windows and I want to use it. Using Lubuntu 11.04. Let me add that when I tried Lubuntu 10.04 it didn't have this problem (all resolutions where available).
I am reinstalling ubuntu mavericks as I could not get the first install to work right. I installed from a CD that I burned. 3/4 of the way through the "installing system" process the screen went dead. The cursor does not respond nor does anything happen with the keyboard. Be aware that I don't know very many things about what a keyboard can do. The screen has been frozen for about a half hour now.
I just upgraded from 9.10 to 10.04 using the automated distro upgrade, and my resolution has been changed to 1024x768. I tried to go to System -> Preferences -> Display to see why this might be, but that entry is missing from my Preferences menu. I am using a Radeon HD 4200 video card, but I am not using any special video drivers right now. /etc/X11/xorg.conf does not exist.
1. How sum of system time and user time can be greater than real time ? 2. Even though my program is not waiting for any I/O the real time is smaller than system time as shown
root@chaitu:/home/chaitu/Desktop/Chk# time ./new real0m0.001s user0m0.000s sys0m0.004s
I am trying to install Ubuntu 10.04 from a USB drive but every time I reach the option for changing the keyboard layout and press forward, it seems to get stuck. That is, the mouse icon shows that it is loading but nothing ever happening. I even went for a shower, came back and nothing.
I already have Ubuntu 10.041 and windows xp installed as dual-boot.I am installing another version of Ubuntu in a logical partition.On the last page of the live install guide, there are advanced options.There is a check box next to install boot loader.I already have boot loader from previous Ubuntu installation, correct?What were to happen if I un-check this box?The reason I ask is there were grub updates from previous Ubuntu install.
Every time I open "sound preferences" from either the sound applet or the preferences menu pulseaudio CPU usage goes right up to 100% and proceeds to lock up the entire computer. pavucontrol, paman, and all the other pulseaudio utils work fine, except for ubuntu's sound preferences. It affects a new account.This is my 10.04 desktop that is affected. I have just the default pulseaudio config.
Running windows xp on dell laptop. Installed ubuntu 10.04 all was working fine. Had to format hard drive and re-install windows Xp. when trying to install ubuntu 10.04 i get a dark screen.
Been a while since I've been on here, but I was using Fedora 12 for the longest time and only recently started having problems. I kept getting errors and pop-up dialogs telling me to run yum-complete-transaction, which I tried as root many times. It would then give an error that it couldn't locate the repository and such. So, I looked through all my yum config files and changed a few things until I FINALLY got the command to do something, only it did all kinds of strange things as I was running low on EXT3 disk space and using old Windows' partition to store a lot of things on.
Now, I backed up all the /home directories and files as well as /root, just in case this didn't go smoothly and I still ran out of disk space. If I had the money, I'd buy a storage stick and just back up everything, but that's not an option at the moment. Now I have a crippled version of XP (pretty much useless from a trojan, even though I had McAfee AND Windows Defender running), and half of Fedora 12 with 2 different boot images! When I first did this, I used a 10G partition to install Fedora, which was plenty then. What's left of Win still resides on about 65G of space, but I have a lot of files there I want to keep. Fisrst thing I want to know is, should I look anywhere else on the Fedora disk to find files I may need, just in general? There's still a LITTLE space on the drive to back up stuff if I need to.
Second, while I still had enough to work with, I managed to download and burn a F14 Live CD, which is running now. I saw the option on the desktop to install it, and can get my config files and such from the backups if need be. I do NOT have a DVD burner, so if I have to I can use regular 700MB CDs, but only if they are available.The next thing I need to know is if I can install F14 from the web, without having to download any more ISOs, (again, assuming they are available). I know all my DSL settings so that's not a problem, I just need to find out if I can install it that way before I go clicking that icon. Anyone with experience with this would be helpful. I'm ready (MORE than ready) to go through with it, I just don't want to get "stuck" once I start the process. My download rate is around 200k/sec, so it's going to take some time no matter which way I (can) go.
I used to have Ubuntu 10.10 and Windows 7 RC on separate partitions and I could choose to boot into either. Today I installed Windows 7 Enterprise trial version over the Windows 7 RC partition, and lost the boot screen. Reboot goes to Windows automatically. How can I get the boot options back to launch Ubuntu?
I have installed the debian lenny base system in my old pc. I want only a minimal system with a small window manager like icewm and firefox to surf the web. What I need to write now in text mode to install this minimal system?
I have an HP Pavilion dv9000 which I would like to use completely with any Linux OS. I have tried to install Linux Ubuntu 10.04.1 but it appears that it doesn't recognize the external monitor and ends the installation. I have a clean hard drive that I could install but I do not know which of the two drives I should replace. I can only get into windows in safe mode and I would think this may have something to do with the problem, don't no.
I downloaded the Ubuntu ISO file and burned it to a CD-ROM. Booting from the CD on my laptop I select the language and selection screen appears with all the F1-F6 options below. I've tried all the selections and options through the F keys but that's as far as the install will go. My laptop is a Dell and it's only 3 years old with plenty of memory and HD space.
recently had to reinstall ubuntu 9.10....after all the updates & changes i made in synaptic and some restarts, i wanted to proceed in installing my nvidia drivers, so i stopped gdm and attempted to login as root, but it would not let me. it's strange because i created the root account password prior to this.
so, issuing the command to restart gdm brought me to the login window. after logging in, the screen remains in the login splash and a small terminal appears in the upper left corner. can't seem to get gnome started up.
I'm a new user and recently installed ubuntu on an old samsung laptop, during the installation process i couldnt see anything on the screen and came to the conclusion that ubuntu's default resolution was different to that of the laptop screen so i plugged it into my TV and sure enough it worked however i still only have a picture on the tv, ive tried all the resolutions available in the 'monitors' box but nothing, does anyone know how to fix this?
I have windows installed through virtual Box now but i have some questions. When i make it full screen it goes full screen but Windows stays in the middle of the screen small and doesn't adjust to the full screen. Can you make windows completely take up the full screen Can i access folders on my ubuntu drive ? i have a file in downloads i want in windows but don't want to reinstall it
Just installed a clean version of 10.04 onto my Sony VAIO with an ATI Radeon Mobility x700 video card.Whilst using 9.10 KK I was getting low resolution but the dual monitors worked totally fine.Which I use to connect to my TV via a RGB/PC Cord.Since upgrading to 10.04 the resolution is awesome BUT when I merge both monitors the laptop goes mental and shows a white/whitish screen.If I use have both monitors side by side its OK but then I cant run xbmc to show movies. I'm stuck with making the TV my main monitor, which is a pain.Why is the laptop going white after merging screens? Does anybody have any ideas?
prefrences options are grayout in deluge after re-installcant download torrents neither.i delete all deluge files and install again and still prefreneces grayout.
I'm using a NVIDIA 9600M GT on my laptop running Ubuntu 10.10. The laptop has a 16:10 display, I also connected my 16:9 LCD TV via HDMI. I would like to use them as clones. The problem is, as my TV has a different aspect ratio than my laptop display, the image does not fully fit on the TV. For example, when using a resolution of 1280x800 (16:10), one tenth of the width of that image is missing on my TV, as it has an aspect ratio of 16:9.
In Windows, the NVIDIA software stretches the image so that it appears a little distorted on my TV, but at least I see everything. Is it possible to do that in Ubuntu?
I try to make a small AVR-Board boot a Linux from my Lenovo laptop, which is configured as NFS server (running nfs-kernel-server). Everything is configured correctly and it should work, but it doesn't.I just installed another laptop (from ASUS) with the same configuration (OS, tools, settings) and there it works immediately.
So I wondered, what's going on on eth0 ? I checked with Wireshark and here are the things I found out.On both laptops, the following paket arrives:
So I have the burned ubuntu CD, and I'm attempting to install it on a system that has one HDD with XP/Vista on it, and another that is completely formatted and unpartitioned. However, when I boot to the ubuntu CD, I can use the menus from the bottom, and select the language when initially prompted, but I can't select any of the menu options except for boot from first hard drive.
setting up my dual monitors. I can get a continuous screen but the screen does fill the lcd screen all the way. I have dove in to xorg. I'm on fedora 12 .
