Ubuntu Multimedia :: Epson DX8400 Scanner Driver With 9.10 - When Run XSane - Replies - There Is No Available Device

Jan 15, 2010

Ok, installing the Epson DX8400 printer driver was easy... I just turned it on, and Ubuntu searched and installed the printer itself.

But scanning... that's another story. In Ubuntu 9.04 the trick was as simple as installing libsane-extras in Synaptic, but this doesn't work in Ubuntu 9.10! When I try to run XSane, it simply replies that there is no available device...

View 5 Replies


Fedora Hardware :: Epson CX5600 Scanner Xsane - No Devices Available?

Aug 4, 2010

The printer of my multi Epson CX5600 works fine, but when I run xsane I get the "No devices available" window. I tried running it as root with the same result. I have installed "iscan-firmware-2.1.1-1.fc12 (noarch) but it still wont work.h kernel

View 6 Replies View Related

General :: Xsane Is Unable To Detect Scanner Device?

Feb 3, 2010

I'm using debian lenny, I bought a new Hp officejet j4500 scanner but the xsane is unable to detect the scanner. It says device not found. If I run xsane as root it detects and works properly it is obvious.I have added the user to scanner,saned and also to root user group.

View 2 Replies View Related

Ubuntu :: Canon MX320 Scanner Not Able To Get The XSane Image Scanner To Recognize Scanner?

Jul 11, 2010

I just received a Canon Pixma MX320 as a gift.

I am currently running the Ubuntu 10.04 OS

I was able to get the printer up and running by downloading the printer driver for debian linux (3.1) from the Canon site without any problems.

Unfortunately I am not having the same luck with the scanner.

I tried downloading ScanGear MP for Linux (deb) (1.3) from the same Canon site but have not yet been able to get the XSane Image Scanner to recognize this scanner driver for my Canon.

View 2 Replies View Related

Ubuntu :: EPSON Stylus SX400 Scanner Driver?

Jul 11, 2010

I currently have an EPSON Stylus SX400 that I've connected to my Dell Desktop running Ubuntu Lucid Linux. Though Ubuntu installed the printer at a great speed , it didn't install the scanner. Where can I get drivers to install the scanners, all the software I use do not discover a device?

View 2 Replies View Related

Ubuntu :: XSane Image Scanner Won't Recognize Scanner?

Sep 7, 2010

I've installed XSane Image Scanner. When I first opened it, it searched for my scanner and didn't give any error messages, and it had my scanner model in the heading of the scan window. But when I hit the scan button, it gave me saying, "Failed to start scanner: error during device I/O.I closed everything, and opened XSane again. This time it said there was no scanner available. The scanner is plugged into the USB port and uses that for both power and data. It's a Canoscan Model N650U.

View 9 Replies View Related

Hardware :: Scanner Not Recognized In Ubuntu Epson Stylus NX510 Printer/scanner?

Aug 15, 2010

I was able to get my Epson Stylus NX510 printer up and running (after much issue), but I can't get the scanner working. I'm on a laptop, and the printer/scanner is wifi enabled and broadcasts with its own IP address. I can print with no problem, but xsane and simple scan don't recognize the scanner. I'm running Ubuntu 10.04 Lucid Lynx.

View 7 Replies View Related

Hardware :: Using Iscan By Epson CX9300F - Could Not Send Command To Scanner - Check Scanner's Status

Mar 17, 2010

After downloading and installing iscan and run it i see this message:

Could not send command to scanner. Check scanner's status.

After command sane-find-scanner:

And this message is result of scanimage command:

No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).

View 4 Replies View Related

Ubuntu :: Epson Perfection 2480 Won't Start With Xsane?

Jan 18, 2010

i had this scanner working perfectly but now when i want to use it xsane returns this error:failed to open device 'snapscan:libusb:001:007':error during device I/Ounder ubuntu 9.04 i tried to change usb ports, disconnect and reconnect the scanner, reboot

View 5 Replies View Related

Ubuntu :: Can't Get The Scanner Recognized By Xsane ?

Mar 4, 2010

I've been using Ubuntu 9.10 'in anger' for a couple of weeks now and overall I'm impressed. However, a couple of days ago my old Epson C46 (which had been working fine under Karmic) died, and I had a look for a replacement.

I decided on a Canon MP270 because Canon seemed to have gone to the trouble of providing Linux drivers on their website. I even phoned Canon and they confirmed it should work fine.

Today the AIO arrived and I downloaded the printer and scanner drivers from Canon. I could't get the install.sh files to run - tried ./ sudo and sh etc, no joy. Anyway, I used the package manager to install the .deb files and that seemed to go OK.

The printing side of things works fine but I can't get the scanner recognized by Xsane.......

View 5 Replies View Related

Ubuntu :: Epson Perfection V330 Photo Not Recognized By XSane And Simple Scan

Jan 13, 2011

I just got an Epson Perfection V330 Photo scanner.After connecting it to Ubuntu 10.04, it's not recognized by XSane and Simple Scan.The relevant lsusb output:Bus 001 Device 008: ID 04b8:0142 Seiko Epson Corp.Google does not yet know "04b8:0142",.

View 5 Replies View Related

Ubuntu Installation :: Xsane Can't Find Scanner?

May 16, 2010

I cant find my scanner (Canon MP250). I have installed the printer and it works fine, this using the drivers from canon (canon divers page) and installed the scanner drivers too. Im running:

$ uname -a
Linux ubuntu 2.6.31-21-generic #59-Ubuntu SMP Wed Mar 24 07:28:27 UTC 2010 x86_64 GNU/Linux
Installed the drivers with


View 4 Replies View Related

Ubuntu :: New Scanner Not Recognized By Xsane / Sort It?

Dec 2, 2010

The scanner is seen using lsusb command but when i open xsane it is not recognized. Xsane wants to use the webcam instead. I think this happened because i saved the settings of the former scanner a few days ago. Should i delete that setting that is saved in the home>.sane>.xsane directory? The old scanner is a Canon Canoscan lide N1220U and the new one is a Canon Canoscan lide 100. I would appreciate any suggestions as i tried a reboot with no improvement :0)

View 2 Replies View Related

Ubuntu :: Stop Scanner Launching Xsane?

Dec 12, 2010

Whenever I switch on my scanner (Epson V200) then it launches Xsane automatically.
Now I know Xsane is wonderful, but often I want to use Epson's iscan instead, and for other users I prefer Simple Scan. Another thread would be a good place to discuss the reasons.

So I would like to stop my scanner launching anything when switched on.

View 1 Replies View Related

Ubuntu :: Scanner Not Detected By Xsane But Video Card Is?

May 7, 2010

Using xsane with HP scanjet 3970 scanner. It used to be that when I plugged the scanner in and started the xsane a window would come up asking if I wanted to use my HP scanner or my Hauppauge video card. Well, that window no longer comes up and the Xsane wants to use my video card. When I try to "scan" the program closes and all the windows associated with it disappear.

View 1 Replies View Related

Ubuntu :: Xsane Image Scanner Freezes While Scanning?

Nov 19, 2010

I have a Fujitsu ScanPartner 93GX scanner that freezes Xsane when I try to use it. The same thing happens to Simple Scan too.

When use sane-find-scanner I get the following:

# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
found SCSI scanner "FUJITSU M3093GX 02" at /dev/sg0


I started to think I might need a different driver. I found a driver (sane-fujitsu.5) at mangpages (link), but there are no instructions as to what directory to place it in, what files need to be modified to point to it, etc.

View 3 Replies View Related

Ubuntu :: Get XSane To Recognize Ethernet Attached Scanner/printer?

Jan 30, 2011

I have a Brother mfc-8890dw that is attached to my local area network.I can ping the static ip address of the printer and receive a reply. I can print from all applications.I cannot scan. I did modify the rules files but that only appears pertinent for usb attached devices. What do I need to do to get XSane to recognize my Ethernet attached scanner/printer?

View 2 Replies View Related

Fedora Hardware :: SCSI Scanner Not Detected By XSane?

Mar 11, 2011

I've got a SCSI scanner that is being detected by the kernel on Fedora 14, but XSane does not see it. If I run "sane-find-scanner" it says that noSCSI or USB scanners are found.The scanner is a Cacham Splendeur 3024, model VM3552. I believe this scanner is the same as the Relisys Scorpio VM3552. In /var/log/messages, the following entries show up as soon as the scanner is warmed up:

Mar 11 13:34:45 dt kernel: [22595.116042] usb 4-2: new full speed USB device using uhci_hcd and address 41


View 4 Replies View Related

Hardware :: Cannot Get Xsane Image Scanner To Work With HP5610 All In One / What Is Error All About?

Dec 18, 2009

HP 5610 all in one device scanner settings please. The printer works fine, I have a problem getting the Scanner to work.

I am running Ubuntu Karmic on my Dual Core Desktop PC. When I run Xsane I get the preview window showing OfficeJet 5600 Series. I also get another little error window saying "Error during CMS conversion:Could not open Scanner ICM profile". It seems like Xsane recognises my HP 5610 All in One Printer/Scanner/Fax/Copier device but what is the error all about?

View 5 Replies View Related

Slackware :: Xsane Does Not Find Scanner And Libusb Permission Error?

Oct 25, 2010

I am tired, and I simply can't find an easy answer.So, today I need the scanner in slackware64 13.1, only to find that it does not work as user. I have an HP Deskjet F2180 and using CUPS it is identified as hp:/usb/Deskjet_F2100_series?serial=CN81H4S2SP04TK.In the past the simple solution was to add oneself to the right groups, but it does not work this time.As user I get:

bash-4.1$ sane-find-scanner


View 2 Replies View Related

Ubuntu :: Can't Get Epson Scanner To Work

Feb 11, 2010

I've recently installed Karmic Koala (64 bit version) on my pc via a live cd.I still can't get my epson scanner to work so my plan was to get VirtualBox and then run xp inside Karmic.My problem is that my pc doesn't have an internet connection.

View 3 Replies View Related

Ubuntu :: Epson GT-S50 Scanner And Drivers?

Mar 31, 2010

Looking over the sane project for the epson GT-S50 scanner I see it lists requires DFSG non-free esci-interpreter-gt-s80 Does anybody know if one is writing their own scripts with bash and scanimage if that requirement of DFSG is still required under ubuntu (Karmic or lucid)????

View 1 Replies View Related

Ubuntu Installation :: Device Busy Using Image Scan - Reports Could Not Send Command To Scanner Check The Scanner Status

Apr 9, 2010

Have Karmic 9.10 ,Changed from Epson RX595 all in 1 (uses a ton of ink)Got the Lexmark Pro 805 3 in 1 because it says it supports Linux and the ink cartridge only cost $5 downloaded drivers and printer works but using Xsane Image Scanner error reports

'Lexmark_1_0_0:libsub/001/009': Device busy Using Image Scan - reports Could not send command to scanner Check the scanner status. The RX595's scanner drivers had to been manually instatlled,, in the Printer box the Lexmark shows available..

View 3 Replies View Related

Debian Hardware :: Make Lexmark S305 Scanner (wifi) Work With Xsane?

Mar 21, 2010

After I solved the issue about printer, now I'm struggling to make the integrated scanner of lexmark S305 work with debian.The device is connected to the network through integrated wifi connection (it is NOT connected with usb to a host, which act as a server), but I don't know how xsane can recognize it.I have just added the ip address in /etc/sane.d/net.conf, but it doesn't work at all. I read some tutorials on how to configure a network scanner, but they are all related to a scanner connected to a computer through usb, and then shared on the network by this computer.The second issue (probably more important) is that xsane probably doesn't recognize even with usb connection the scanner. The latter is not listed in the supported scanner list. Indeed connecting by usb to my laptop, it doesn't work. I haven't found any driver for it, but probably it could work with driver of other scanners.

View 1 Replies View Related

Fedora :: 14 Can't 'see' Epson CX3200 Scanner

Dec 4, 2010

I recently installed Fedora 14. Unfortunately, the scanner on my Epson CX3200 is not detected by the system. When i open 'Simple Scan', it shows i have a Epson CC-570L, and i don't know what to do to change it, so that it 'sees' my scanner. how i can change the scanner in 'Simple Scanner' to my CX3200?

View 2 Replies View Related

Fedora :: Setup Epson V33 Scanner?

Mar 2, 2011

I have Just got Fedora up and working and trying to setup my Epson V33 Scanner, I have downloaded the Driver packages from Avasys (http://avasys.jp/eng/linux_driver/) But when I try to install the iscan rpm package it tells me that I need libltdl.so.3, after doing some googling I have managed to find this rpm for Mandriva but I am unsure if installing this on Fedora would cause any problems?[URL].. When I looked on the Avasys site this is available as an rpm (or to be exact libltdl.so.7!)

View 1 Replies View Related

Ubuntu :: Canon FB 630P Scanner Driver / Can't Get System To Recognise The Scanner?

Dec 14, 2010

How to get this scanner to work with Ubuntu 10.10

It's connected and printer is working through the scanner.But i can't get the system to recognise the scanner.

I'm all new to Ubuntu, and i thought it was easy and terminal is a totally new thing to me.

Is there a workaround to get this scanner to work through graphical interface install, or is terminal wisdom needed...

View 3 Replies View Related

Ubuntu :: Epson Stylus CX7450 - Scanner Not Working

Feb 2, 2010

Haven't been able to get my scanner to work on my Epson Stylus CX7450. XSane doesn't seem to support my scanner. Is there a way around this?

View 3 Replies View Related

Ubuntu :: Epson Scanner Not Detected - No Usbfs Module

Mar 7, 2010

Have an Epson Expression 1640 XL A3 scanner (usb & network interface card). Bus=0002 Device=004 its usb ID is 0x04b8 0x0109 I have never been able to connect the scanner using the network - if anybody can advise, I would be very grateful. Quite happy to use this if usb is going to be a problem The scanner has worked very well through the usb and wask working well with 9.04(32bit). I have bought a new machine and did a fresh install of 9.10 (64bit) and the scanner is not detected.

xsane detects my webcams (vl4:/dev/video*)but no scanner Have run sudo xsane-find-scanner - only the webcams are detected Have edited /etc/sane.d/epson2.conf - added scanner usb ID, and added the lines:- usb /dev/usb/scanner0 usb /dev/usbscanner0 as advised in one of the threads in this forum sudo scanimage -L gave this-

WARNING: Unhandled message: interface=org.freedesktop.DBus.Introspectable, path=/, member=Introspect
device `v4l:/dev/video1' is a Noname Creative Labs Webcam Pro Ex virtual device
device `v4l:/dev/video0' is a Noname Logitech QuickCam Pro 4000 virtual device


Do I need to select M for these three modules?

the following had [M] -
USB Printer support
Microtek X6USB scanner support

It looks like the scanner module has not been loaded, and possibly the usbfs yet usb webcam and card readers are accessible. I have tried to keep outputs relevant & short. If I have omitted anything, you would like full results or any other information.

View 1 Replies View Related

Ubuntu :: Epson NX420 Printer With Working Scanner

Dec 5, 2010

I've been trying to get my Epson NX420 printer to scan for about three months now, and I finally got it working. Here's how:
1. Go to [URL] and search for your printer. Select distribution and version and answer a couple of other questions.
2. Download pipslite_1.5.0-2_i386.deb, (or the 64-bit version), and all the iscan*.deb files (again, appropriate to your system).
3. [CRITICAL] Go to [URL] and download this 8.04 package which worked just fine for me on 10.10.
4. Use the Software Center or GDebi or sudo dpkg -i the .debs in this order:

1) libtdl3, which is a dependency for Step 2.
2) pipslite
3) iscan-data
4) iscan-network
5) iscan
(If you use a USB connection, you don't need the iscan-network file.) This got my NX420 scanner up and running just fine. Installing libtdl3 was the key; in fact, I used the Debian Lenny package.

View 9 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved