CentOS 5 Hardware :: Audio Device Detected But Not Working

Feb 8, 2010

I am new to Linux and after a lot of research I settled on CentOS to be my OS for Linux. But I am having trouble with sound right now as I can not play audio. The command system-config-soundcard opened a gui for audio configuration saying following device is detected - Intel Corp. 82801(ICH9 Family) HD Audio Controller.

Ouput for some commands are given below::
[root@localhost ~]# lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) .....

[root@localhost ~]# uname -r
2.6.18-164.el5
[root@localhost ~]# cat /etc/redhat-release
CentOS release 5.4 (Final)

Clicking on the volume icon gives me message that either Gstreamer plugins are not installed or sound card is not configured.

While Trying to install gstreamer using YUM, I got following message:
[root@localhost ~]# yum install gstreamer
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile .....
Setting up Install Process
Package gstreamer-0.10.20-3.el5.x86_64 already installed and latest version
Package gstreamer-0.10.20-3.el5.i386 already installed and latest version
Nothing to do
[root@localhost ~]#

So I guess gstreamer are installed but how to configure the sound card or is there any other problem.

View 9 Replies


ADVERTISEMENT

General :: Audio Device Detected But Do Not Hear Sound

Feb 15, 2011

When I run the audio configuration I get:
The following audio device was detected:
Vendor: nVidia
Model Coporation GF100 High Definition Audio Controller
Module snd-hda-intel
but I do not hear sound.

The ALSA driver version is 1.0.14rc3
Lib package is: 1.0.17.-1.e15
Utils package is: 1.0.17-1.e15

The sound log has:
class: AUDIO
bus: PCI
detached: 0
driver: snd-hda-intel
desc: "nVidia Corporation GF100 High Definition Audio Controller" .....

The audio configuration sound test and the answer to the question No returns a message that says: automatic detection of sound card did not work. I am not sure what else is needed to diagnose the problem.

View 8 Replies View Related

Hardware :: Onboard Audio Device Not Detected For ASUS P4S533 MB?

Mar 16, 2010

I recently installed Arch Linux on an old desktop machine. Everything works well except the onboard audio isn't detected at all.

I am using the 2.6.32-ARCH kernel

My lspci output is:

Code:
# lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS645DX Host & Memory & AGP Controller
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP)

[Code]....

On another note, the manufacturer (ASUS) actually provides Linux audio drivers for my motherboard (model: P4S533). I attempted to install them, but the configuration process involves using make menuconfig, make xconfig, or make config to add the drivers to the kernel (I think) and I'm still a relatively new Linux user and had no clue what I was doing.

View 14 Replies View Related

Ubuntu Installation :: XSane Stopped Working - No Device Detected

Mar 29, 2010

Recently xsane has stopped detecting my MFP (HP Deskjet F2280). My setup has not had any hardware changes and the only software changes in that time have been the periodic Synaptic updates. Before this hiccup all had been well for over a year. If I run xsane it thinks a while (10 sec?) and tells me in a little panel no devices were detected. If I run lsusb, it finds the device, but after all it is a printer/scanner and the printing function continues to be OK so this is not a surprise.

I do not know enough to understand all the lsusb output to know if anything is amiss in the detail. What is it that xsane needs so that it detects the device as a scanner? Is there a file or specific stuff in a file which I could get from an old backup or edit (carefully!) by hand? I don't need the scanning function often enough to pin down what might have done the mischief.

View 2 Replies View Related

CentOS 5 Hardware :: In 5.3 Two Applications Cannot Use The Audio Device At A Time

Sep 19, 2009

I just installed centos 5.1 on my laptop. Then i upgraded it to 5.3. The problem that i am facing is that at a time only one application can use the audio device. Is this some kind of driver problem or an error in Centos? If one application is using the audio device and if i start the other application that also want to use the audio device it simply gives an error like audio device is locked by other application and is muted. In windows XP my audio device is shown as Sigmatel Audio.

View 1 Replies View Related

Fedora Hardware :: Full Speed USB MSC Device Detected As Input Device?

Apr 7, 2011

I am working on an embedded system, which is an USB MSC device that supports some vendor specific scsi commands. I am using FC10 laptop as USB host for testing, and it runs some small apps based on sg3. All has been well for ~ a week. The FC10 laptop is able to communicate with the device and retrieve data. Suddenly, starting from today, the laptop is not able to properly detect the device. When plugged-in, the MSC device is detected as input device (I thought). This is observed from "dmesg" output and changes in "/dev/input/".The device under development is running at full speed. When I connect to winXP, no problem. A windows file explorer pops up, showing the content of the drive.Also, the FC10 has no problem with other USB flash drive (high speed).

View 1 Replies View Related

CentOS 5 Hardware :: Laptop Audio Not Working?

Mar 24, 2011

I've got a Sager laptop that I'm tring to get audio working under Centos 5.5 64 bit. (It does work with the Win 7 boot). I followed FAQ #4 and did not find my Vendor:Device ID pairing on the Device ID page. Here's what I tried so far...

/sbin/lspci -v shows:
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
Subsystem: CLEVO/KAPOK Computer Unknown device 7200

[code]....

View 6 Replies View Related

OpenSUSE Hardware :: Why Alsamixer Recognize Default Audio Device As HDA Intel Not USB Audio

Aug 7, 2009

I have behringer UCA202 usb card, after plug to usb, it just works , I have only small problem with alsamixer, which still shows by default my integrated HDA Intel, I could switch it by F6 or by alsamixer -c 1no problem, but I expect that default card is now plugged "USB audio", so why alsamixer recognize default audio device as HDA intel and not a USB Audio ?anyone who has two or more sound cards with the same issue ?

View 3 Replies View Related

Slackware :: VirtualBox - Windowsxp Guest - No Sound - Unknown Audio Device - In The Windows Device Manager

Mar 11, 2010

For those that use Virtualbox on their slackware host and have a windows (xp) guest running. I have tried various settings for sound (Alsa, PulseAudio), the AC97 drivers are installed in the Windows xp guest os, but there is no sound and there is an unknown audio device (in the windows device manager). If I remove the AC97 drivers and use the soundblaster16 drivers in the Vbox settings there is no unknown sound device, but there's still no sound. why I can't get sound working?

View 13 Replies View Related

CentOS 5 Hardware :: SPDIF Audio On Creative X-FI Not Working In ALSA With XMMS?

May 29, 2010

Recently i put a DAC connected to the CL X-FI board via the SPDIF interface. Result is i can listen only one channel, the left one (hedaphone) while using the xmms, audacious.

The thing is that i'm able to listen both channels if i use the VLC configured with the same output, that is hw:2,4.

Info:

[root@kryptonbox ~]# lsmod | grep snd
snd_seq_midi 12353 0
snd_ctxfi 80557 1
snd_seq_dummy 7877 0

[Code]....

View 2 Replies View Related

CentOS 5 Networking :: ZyDAS Virtual Media For 802.11bg - Wireless USB Device Not Working

Jan 12, 2010

I just installed Centos 5.4 on the 2nd partion of my hard drive. I have an ethernet card in my machine (a 3Com Corporation 3c905 100BaseTX [Boomerang] card), but I need to be able to use my wireless USB device I bought from my local phone company (Qwest)...because I will not always have the luxury of plugging in to a hard-wired connection. The USB wireless device works fine in Windows, but I need to be able to use it on my newly installed Centos 5.4 partition.

Here's some info:

[Code]...

View 4 Replies View Related

Ubuntu Multimedia :: Audio CDs Not Detected In 9.10?

Jan 16, 2010

If I put an Audio CD in my CD-ROM drive, then try to open Sound Juicer, I get an error saying that Sound Juicer cannot find any CD-ROM Drives to read. I can't rip my audio cd.

Similar attempts in K3b yielded similar results, albeit differently worded error messages.

View 4 Replies View Related

Ubuntu :: Get The Card Number And Device Number On System For Attched USb Audio Device?

Oct 1, 2010

how to get the card number and device number on system for attched USb audio device?

View 3 Replies View Related

Ubuntu :: USB Device Not Detected (gamepad)?

Jun 2, 2011

I bought a x-kim gptl-00c gamepad and when I plug it in it is not recognized.
The dmesg read out is

[ 2173.516017] usb 5-2: new low speed USB device using uhci_hcd and address 63
[ 2173.928012] usb 5-2: device not accepting address 63, error -71

it is not detected from lsusb

[Code]...

View 1 Replies View Related

Fedora Hardware :: VT1708S HD Audio Not Detected

Jan 6, 2011

I have been using Fedora on and off for a year now, and have decided to take the full plunge and install it as my sole OS. Nearly everything works, although I was noticing some issues with the audio so I decided to install the proper drivers.

I found them here: [URL]

Before I started this process I had a detected sound card in hardware and now it is gone - how do I restore it?

how to get it I am still learning the terminal commands.

View 8 Replies View Related

General :: USB Audio Detected But Doesn't Work

May 3, 2011

you have an onboard soundcard that you have or may not have disabled in the BIOS, and you intend to use headphones with a USB sound card with headphone and microphone jacks (or no mic jack, it doesn't matter), but you notice that the headphones are detected. Alsamixer provides an interface to control the volume, etc etc, but still the headphones do not work..In my case, the module snd_hda_intel was being loaded for my onboard soundcard that I had disabled in the BIOS before booting the computer for the first time, and even though I tried to "activate" the USB headset in alsamixer, I still couldn't get the headset to work.

Solution as a trial: Open a terminal, and look to the code section for what you need to type.A big missing key to my puzzle is how to simply restart and/or reload a module so that it isn't necessary to unplug and plug back in the USB device. Can't I just re-discover the USB devices? (or other such hardware, such as a PCI card, or otherwise inaccessible component?)

View 4 Replies View Related

Ubuntu Networking :: Wireless Device Not Detected In 9.10?

Jan 9, 2010

I have freshly installed ubuntu 9.10 and moreover i am completely a newbie to Linux. The problem now i am facing is, i am not able to configure my wireless router. I tried finding drivers for it in System->administration->hardware drivers. But it showed me none. Then i checked out one of the threads in this forum and came across the 'lspci -nn' cmd. This gave me the info abt my wireless network controller and it was : 'Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)'.

View 1 Replies View Related

Ubuntu Multimedia :: 10.04 Only 1 Video Device Detected?

May 8, 2010

some days ago I upgraded to Ubuntu 10.04 and now I have a problem with my webcam. I like to use chatroulette and mebeam, therefore I have to use programs like webcamstudio/flashcam... (Flash does not accept the normal cam device v4l2 and webcamstudio puts it to v4l loopback). The problem is that Ubuntu is detecting only v4l2 and not v4l, so that I don't have an output device in webcamstudio.

When I type:
ls -l /dev/video*
the answer is only:
crw-rw----+ 1 root video 81, 0 2010-05-08 17:59 /dev/video0
and nothing more

how I can create a second video device for flash.

View 7 Replies View Related

Ubuntu :: Banshee: LG GD330 Not Detected As Device?

Aug 9, 2011

I have tried connecting an LG GD330 mobile in both "Mass Storage" & "Data Service" but in either cases it does not appear in bansheee nor even in rhythmbox.

View 6 Replies View Related

Ubuntu Installation :: No Boot Device Detected?

Aug 18, 2011

I'm trying to install 11.04 onto a custom build pc.I have burned an install CD of the desktop edition and have inserted it into the drive, started up, and tried to run the live version. IT pops up, everything works, Hooray! I go to install it to disk and I follow all the prompts and it needs me to reboot to start. YAY! I click to reboot, remove the CD as requested, and then I get the "No Boot Device Detected!" error message.

I then tried installing straight from the CD and not booting into the live version. I follow all the steps and get a congratulations on installing it and all I need to do it reboot. I remove the CD, reboot, and BANG! the same message. I'm not sure what's up or even where I can get information from because there is no BIOS splash screen or anything to naviagate through.

System Specs:
Intel Atom Mobo/Proc (1.66Hz)
8GB Corsair RAM
1 slim optical drive (SATA)
1 2TB Seagate HD (SATA)
1 Case/PSU combination

EDIT1: Currently I am checking the live CD for defects (though it has an internet connection so I'm unsure whether the CD matters).

View 2 Replies View Related

General :: Audio CD Not Getting Detected On OpenSuse 11.2 (Xfce 4.6) / Solve This?

Feb 4, 2010

Operating system : OpenSuse 11.2
Desktop environment : Xfce 4.6
Kernel : Default

All other CD's do get detected on the above mentioned platform on my laptop, but the 4 new Audio CD's I've brought do not get detected there.

By detection I mean:
i. No icon is shown on the desktop.
ii. ls -R /media/ shows nothing.

Those Audio CD's do get detected on a different laptop with OpenSuse 10.3 with Kde 3.5.7 on it !!

Kindly let me know if I need to give more information regarding the above problem.

View 8 Replies View Related

Fedora Networking :: Wifi Device Detected But Can't Connect?

Jan 21, 2010

I have just installed the last FC distro, and everything works good, except the wireless network.I have a Linksys N-Ultra WirelessN USB wifi card, model WUSB600N.It uses the rt2x00 driver, concretely the rt2870 driver (at least, thats the driver included in the original device drivers CD).Right now, the problem is that i don't know how to make my Fedora 12 to enable and/or connect to internet.

dmesg | tail
usb 1-3: Manufacturer: Cisco-Linksys LLC
usb 1-3: configuration #1 chosen from 1 choice

[code]...

View 4 Replies View Related

OpenSUSE Hardware :: 11.4 Integrated Bluetooth Device Not Detected?

Apr 2, 2011

My onboard bluetooth is not being detected by SUSE 11.4. Fedora 14 has no problem detecting the hardware, but it just doesn't show up in SUSE 11.4. I have included a few outputs:

lsusb:

Code:
Bus 008 Device 002: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
rfkill list

[Code]....

If I plug in a dongle, the Bluetooth icon shows up in the notification bar, and I'm able to add and remove devices normally. Is there support for my onboard bluetooth device?

View 9 Replies View Related

OpenSUSE Network :: 11.1 - Router On USB Not Detected (Unknown Device)

Mar 10, 2010

I installed 11.1 when it first came out. The PC I used gave up the ghost and I bought a refurbie, HP xw4100 and installed the 11.1 drive in it. All works except Internet connection. I am befuddled, bemused, confused and at a complete loss! The router on USB is not detected.

Boot Time - Status blinks, LAN is OFF and remains OFF. DSL blinks several times.
Booted - Status continues and DSL blinks.

YaST (NetworkManager is useless)
Network Devices - DSL
Config Overview
- DSL Devices - Not detected
- Add - PPP over Ethernet
Mode Dependent Settings
- Ethernet Card
- DS: Connection - Unknown - No IP address assigned
- Configure Network Cards = On Hotplug
Network Settings
- Enable IPV6 (as previously set)
- DHCP Client Options - left blank
Overview
- Unknown Device
- IP Address - Not configured
- Unknown Network Device (no hwinfo)
Edit
- Dynamic Address - Zeroconf
Next
- Loop back to Overview - Unknown Device

View 6 Replies View Related

Ubuntu Installation :: Espon Printer Not Detected As A Usb Device

Jan 11, 2010

I have a Epson Stylus SX115 All In One Printer which i connected to ubuntu 9.10 the other day. Upon installation the drivers for the stylus SX 115 were not available, but there were drivers for the stylus SX110 which i then installed. Printing is fine although for some reason even though i connect via usb cable the printer is not detected as a external device. I have to pull out the usb cable without unmounting-what should i do?

View 8 Replies View Related

Ubuntu Installation :: How To Test That Infrared Device Detected

Apr 4, 2010

I am new to linux having just abandoned Windows due to stability issues. I have a Hauppage remote with a usb ir receiver. This worked fine under windows using the drivers for the windows media center remote. I can't however get this to work under Linux. What I am really looking for is a method, perhaps using a command line in the terminal window to be able to test and see if the OS has actually detected the device. I have tried irw, but there is no response. If I know that the device is connected, then I can start looking at issues of identifying the correct drivers for the device.

View 6 Replies View Related

Ubuntu Networking :: Usb To Ethernet Device Not Detected / Enable This?

Jul 28, 2011

I'm using ubuntu 10.04 enterprise cloud server for my project. I use USB NIC to interface with other 2 servers. but the system doesnot detect USB NIC. detect & configure USB NIC in the network.

View 5 Replies View Related

Ubuntu :: Portable MP3 Player Not Detected - Device Offline

Jun 4, 2010

After plugging in my mp3 player to usb it isn't detected, even though it powers up and charges. I do an fdisk -l and nothing. My lspci shows the controller and my mouse is detected. lsusb shows the Phillips gogear as the device and it is device 2. I did dmesg and at the end it showed

scsi 6:0:0:0: Device offlined - not ready after error recovery

I don't know if this is the issue or not but it's the only error I get, so I assume it's the problem.

View 9 Replies View Related

Hardware :: HP CM 2320 FXI Scanner And Sane - No Device Detected

Mar 6, 2011

I have a problem here where sane no longer detects my scanner.

Code:
lsusb
reports
Bus 007 Device 002: ID 03f0:5b17 Hewlett-Packard

Code:
sane-find-scanner
reports:
found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x5b17 [HP Color LaserJet CM2320fxi MFP]) at libusb:007:002

Code:
scanimage -L
reports

No scanners were identified. xsane reports no devices detected (I have it in French, "Aucun p'rif'rique disponible"). I get the same when I launch xsane as root, so I doubt it is a usb-rules issue. It used to work; I checked /proc/bus/usb, but that is empty.

View 3 Replies View Related

General :: Dynebolic: No Storage Device With Dyne Detected

Mar 20, 2010

I am trying to install dynabolic on my system by docking.I copied dyne/ directory into my partition and updated grub as follows:

title Dyne
root (hd0,0)
kernel (hd0,0)/dyne/2618ckld.krn root=/dev/ram0 rw load_ramdisk=1 prompt_ramdisk=0
ramdisk_start=0 max_loop=64 vga=788
initrd (hd0,0)/dyne/initrd.gz

Still on booting into it,it is saying "No storage device with dyne system found"

why this happens? On the otherhand it is automatically detecting my pendrive in which i have copied dyne/
and boots from it.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved