Ubuntu Installation :: Espon Printer Not Detected As A Usb Device
Jan 11, 2010
I have a Epson Stylus SX115 All In One Printer which i connected to ubuntu 9.10 the other day. Upon installation the drivers for the stylus SX 115 were not available, but there were drivers for the stylus SX110 which i then installed. Printing is fine although for some reason even though i connect via usb cable the printer is not detected as a external device. I have to pull out the usb cable without unmounting-what should i do?
View 8 Replies
ADVERTISEMENT
Aug 12, 2011
I've just purchased an EPSON SX425W Wifi printer/scanner/copier. How can I install it in Ubuntu?
View 1 Replies
View Related
Jul 16, 2010
I have just installed Ubuntu 10.04 LTS on my AMD 64 bit desktop. I have a usb connection for my Brother MFC 8860DN printer. I used the synaptic package manager to install the printer drivers ubuntu already had in their repository for my printer model. When I connect my printer to the computer Ubuntu recognizes the model, but cannot detect the printer drivers I have already installed. The printer drivers were installed to /usr where a Brother folder was created. the Cupswrapper and lpd files are in the Brother folder. How can I get the system to detect its own files so I can get the printer to work?
View 9 Replies
View Related
Aug 18, 2011
I'm trying to install 11.04 onto a custom build pc.I have burned an install CD of the desktop edition and have inserted it into the drive, started up, and tried to run the live version. IT pops up, everything works, Hooray! I go to install it to disk and I follow all the prompts and it needs me to reboot to start. YAY! I click to reboot, remove the CD as requested, and then I get the "No Boot Device Detected!" error message.
I then tried installing straight from the CD and not booting into the live version. I follow all the steps and get a congratulations on installing it and all I need to do it reboot. I remove the CD, reboot, and BANG! the same message. I'm not sure what's up or even where I can get information from because there is no BIOS splash screen or anything to naviagate through.
System Specs:
Intel Atom Mobo/Proc (1.66Hz)
8GB Corsair RAM
1 slim optical drive (SATA)
1 2TB Seagate HD (SATA)
1 Case/PSU combination
EDIT1: Currently I am checking the live CD for defects (though it has an internet connection so I'm unsure whether the CD matters).
View 2 Replies
View Related
Apr 4, 2010
I am new to linux having just abandoned Windows due to stability issues. I have a Hauppage remote with a usb ir receiver. This worked fine under windows using the drivers for the windows media center remote. I can't however get this to work under Linux. What I am really looking for is a method, perhaps using a command line in the terminal window to be able to test and see if the OS has actually detected the device. I have tried irw, but there is no response. If I know that the device is connected, then I can start looking at issues of identifying the correct drivers for the device.
View 6 Replies
View Related
Mar 29, 2010
Recently xsane has stopped detecting my MFP (HP Deskjet F2280). My setup has not had any hardware changes and the only software changes in that time have been the periodic Synaptic updates. Before this hiccup all had been well for over a year. If I run xsane it thinks a while (10 sec?) and tells me in a little panel no devices were detected. If I run lsusb, it finds the device, but after all it is a printer/scanner and the printing function continues to be OK so this is not a surprise.
I do not know enough to understand all the lsusb output to know if anything is amiss in the detail. What is it that xsane needs so that it detects the device as a scanner? Is there a file or specific stuff in a file which I could get from an old backup or edit (carefully!) by hand? I don't need the scanning function often enough to pin down what might have done the mischief.
View 2 Replies
View Related
Apr 7, 2011
I am working on an embedded system, which is an USB MSC device that supports some vendor specific scsi commands. I am using FC10 laptop as USB host for testing, and it runs some small apps based on sg3. All has been well for ~ a week. The FC10 laptop is able to communicate with the device and retrieve data. Suddenly, starting from today, the laptop is not able to properly detect the device. When plugged-in, the MSC device is detected as input device (I thought). This is observed from "dmesg" output and changes in "/dev/input/".The device under development is running at full speed. When I connect to winXP, no problem. A windows file explorer pops up, showing the content of the drive.Also, the FC10 has no problem with other USB flash drive (high speed).
View 1 Replies
View Related
May 3, 2010
I have a problem with Ubuntu and my USB printer no longer being detected. I have installed 10.04LTS (clean install) and then added kubuntu-desktop using Synaptic.My USB printer (EPSON DX4050) is now not detected when I book into GNOME or KDE session, but IS detected if I boot using a LiveCD.
View 1 Replies
View Related
Jan 3, 2011
I've bought a HP Photosmart printer, HP Photosmart wireless e-All-in-One printer - B110a and i've got a problem installing it properly. I'm using Debian 6.0 Squeeze. When i connect the printer, Debian doesn't recognize my printer as the Photosmart B109 printer for unknown reason. When i go to the site of HP and search for a driver, it directs me to this site:I've downloaded that latest hplip file as a .run file and installed it. My printer is recognized proparly, but when i try to print a colored image, it comes out black/white. Something is not crrect. Does anyone recognize this problem with this type HP printer?
View 7 Replies
View Related
Aug 21, 2010
I just installed 10.04 on my neighbors computer. They have an HP LaserJet 5MP. Sometimes it detects the printer other times (most of the time) it doesn't recognized the printer. I've triple check the cables and powered down restated the computer about 10 time with the printer on and it's not showing up.
View 1 Replies
View Related
Oct 8, 2010
Why doesn't the latest version of ubuntu find my printer?
View 3 Replies
View Related
Jun 27, 2011
Ok, using gnome3 in F15. I'm going in to add my printer. I hit "network" and it searches for about 20-30 seconds and then stops. It's not picking it up.
View 8 Replies
View Related
Jun 2, 2011
I bought a x-kim gptl-00c gamepad and when I plug it in it is not recognized.
The dmesg read out is
[ 2173.516017] usb 5-2: new low speed USB device using uhci_hcd and address 63
[ 2173.928012] usb 5-2: device not accepting address 63, error -71
it is not detected from lsusb
[Code]...
View 1 Replies
View Related
Mar 8, 2011
for some reason, ubuntu cant see it anymore. so how to fix? windows still prints to this printer on the network. I deleted the printer in ubuntu and tried to redetect and now it says no printer at that address.
before I deleted it, I recall it saying something about the backend had failed?
View 1 Replies
View Related
Jan 9, 2010
I have freshly installed ubuntu 9.10 and moreover i am completely a newbie to Linux. The problem now i am facing is, i am not able to configure my wireless router. I tried finding drivers for it in System->administration->hardware drivers. But it showed me none. Then i checked out one of the threads in this forum and came across the 'lspci -nn' cmd. This gave me the info abt my wireless network controller and it was : 'Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)'.
View 1 Replies
View Related
May 8, 2010
some days ago I upgraded to Ubuntu 10.04 and now I have a problem with my webcam. I like to use chatroulette and mebeam, therefore I have to use programs like webcamstudio/flashcam... (Flash does not accept the normal cam device v4l2 and webcamstudio puts it to v4l loopback). The problem is that Ubuntu is detecting only v4l2 and not v4l, so that I don't have an output device in webcamstudio.
When I type:
ls -l /dev/video*
the answer is only:
crw-rw----+ 1 root video 81, 0 2010-05-08 17:59 /dev/video0
and nothing more
how I can create a second video device for flash.
View 7 Replies
View Related
Aug 9, 2011
I have tried connecting an LG GD330 mobile in both "Mass Storage" & "Data Service" but in either cases it does not appear in bansheee nor even in rhythmbox.
View 6 Replies
View Related
Oct 11, 2009
I try to print with an HP 14000 PSC on Fedora 11. The printer is detected, send a document, it goes on the queue but does not get printed. The status is stopped. The printer status stay on idle with /usb/lib/cups/filter/foomatic-rip failed. I try to restart the printer, unplugged reboot; nothing. I used the same printer on F10 was working fine.
View 3 Replies
View Related
Aug 2, 2010
I have an epson cx7800 printer/scanner that 11,3 doesn't detect on USB. I tried Yast-Hardware-printers and Yast-Hardware-printers and nothing is discovered/detected.
Are there repos for this stuff and is there a tutorial like the one for graphic card theory I could peruse?
View 3 Replies
View Related
Jun 21, 2011
I'm running OpenSuse 11.4 and trying to connect a brand-new Xerox Phaser 6010 printer through USB.
I started by trying Yast>Hardware>Printer>Add, but no printer was detected. I tried "Detect More", but still no printer was detected.
The USB cable is connected, the printer is turned on, and /dev/usb/lp0 exists. There is only one printer on my system, so this must by my printer device; indeed, it disappears when I turn off the printer. Also, the printer works nicely under Windows, so there is no hardware problem with the printer itself.
I tried removing and reinserting the usblp module (using `rmmod usblp; insmod usblp`), but still no printer. Cups does not seem to find it.
I also tried explicitly specifying a URI for the printer using ConnectionWizard>SpecifyArbitraryDeviceURI usb:/dev/usb/lp1, selected the Xerox Phaser 6010 driver (which is present in the list) and tried to print a test page, but nothing happens.
What other options are there to figure out what is wrong and get this printer to work under OpenSuse?
View 9 Replies
View Related
Jul 28, 2011
I'm using ubuntu 10.04 enterprise cloud server for my project. I use USB NIC to interface with other 2 servers. but the system doesnot detect USB NIC. detect & configure USB NIC in the network.
View 5 Replies
View Related
Jun 4, 2010
After plugging in my mp3 player to usb it isn't detected, even though it powers up and charges. I do an fdisk -l and nothing. My lspci shows the controller and my mouse is detected. lsusb shows the Phillips gogear as the device and it is device 2. I did dmesg and at the end it showed
scsi 6:0:0:0: Device offlined - not ready after error recovery
I don't know if this is the issue or not but it's the only error I get, so I assume it's the problem.
View 9 Replies
View Related
Jun 2, 2010
I have Canon MX860 Multifunction USB/Wireless printer that I am trying to add in Fedora 13. Looking under Desktop > Computer via USB connection, the printer is detected as some hardware device I can mount and unmount. However, when I am trying to add this printer via System > Administration > Printing, the printer is not detected at all nor can I add. FYI, this printer works fine in Ubuntu 10.04 LTS. How I can make this printer working in Fedora 13?
View 5 Replies
View Related
Jul 17, 2011
I have purchase one Lenovo L420. It has Windows 7 installed. I have installed Ubuntu 10.10 also (dual boot). The wireless is not working in Ubuntu but working in Windows 7. I think that the wireless device is not detected in Ubuntu.
View 9 Replies
View Related
May 6, 2010
I have an nc8000 that gives a "104 unsupported wireless network device detected" error when I plug in my Intel wifi card that I acquired recently. Based on reading, this is a common HP problem due to non-native HP hardware. If I insert the Intel Pro card after the HP boot screen, 10.04 loads just fine and Ubuntu detects the card.
1) Machine Brand and Model (PC/Laptop): HP/Compaq nc8000
2) Wireless Brand, Model and Wireless Chipset: 02:04.0 Network controller: Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection (rev 05)
3) Check interface:
lo no wireless extensions.
eth0 no wireless extensions.
irda0 no wireless extensions.
eth1 unassociated ESSIDff/any
4) Check for modules:
Code:
Module Size Used by
binfmt_misc 6587 1
snd_intel8x0 25588 2
snd_ac97_codec 100646 1 snd_intel8x0
ac97_bus 1002 1 snd_ac97_codec
fbcon 35102 71 .....
5) Network configuration
Code:
$ *-network:0
description: Wireless interface
product: PRO/Wireless 2915ABG [Calexico2] Network Connection
vendor: Intel Corporation
physical id: 4 .....
6) Scan for networks:
Code:
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
irda0 Interface doesn't support scanning.
eth1 No scan results
7) Ubuntu Version:
Code:
Ubuntu 10.04 LTS
8 ) Kernel/architecture (including 32 vs. 64 bit):
Code: 2.6.32-21-generic i686
View 2 Replies
View Related
Jan 21, 2010
I have just installed the last FC distro, and everything works good, except the wireless network.I have a Linksys N-Ultra WirelessN USB wifi card, model WUSB600N.It uses the rt2x00 driver, concretely the rt2870 driver (at least, thats the driver included in the original device drivers CD).Right now, the problem is that i don't know how to make my Fedora 12 to enable and/or connect to internet.
dmesg | tail
usb 1-3: Manufacturer: Cisco-Linksys LLC
usb 1-3: configuration #1 chosen from 1 choice
[code]...
View 4 Replies
View Related
Apr 2, 2011
My onboard bluetooth is not being detected by SUSE 11.4. Fedora 14 has no problem detecting the hardware, but it just doesn't show up in SUSE 11.4. I have included a few outputs:
lsusb:
Code:
Bus 008 Device 002: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
rfkill list
[Code]....
If I plug in a dongle, the Bluetooth icon shows up in the notification bar, and I'm able to add and remove devices normally. Is there support for my onboard bluetooth device?
View 9 Replies
View Related
Mar 10, 2010
I installed 11.1 when it first came out. The PC I used gave up the ghost and I bought a refurbie, HP xw4100 and installed the 11.1 drive in it. All works except Internet connection. I am befuddled, bemused, confused and at a complete loss! The router on USB is not detected.
Boot Time - Status blinks, LAN is OFF and remains OFF. DSL blinks several times.
Booted - Status continues and DSL blinks.
YaST (NetworkManager is useless)
Network Devices - DSL
Config Overview
- DSL Devices - Not detected
- Add - PPP over Ethernet
Mode Dependent Settings
- Ethernet Card
- DS: Connection - Unknown - No IP address assigned
- Configure Network Cards = On Hotplug
Network Settings
- Enable IPV6 (as previously set)
- DHCP Client Options - left blank
Overview
- Unknown Device
- IP Address - Not configured
- Unknown Network Device (no hwinfo)
Edit
- Dynamic Address - Zeroconf
Next
- Loop back to Overview - Unknown Device
View 6 Replies
View Related
Mar 6, 2011
I have a problem here where sane no longer detects my scanner.
Code:
lsusb
reports
Bus 007 Device 002: ID 03f0:5b17 Hewlett-Packard
Code:
sane-find-scanner
reports:
found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x5b17 [HP Color LaserJet CM2320fxi MFP]) at libusb:007:002
Code:
scanimage -L
reports
No scanners were identified. xsane reports no devices detected (I have it in French, "Aucun p'rif'rique disponible"). I get the same when I launch xsane as root, so I doubt it is a usb-rules issue. It used to work; I checked /proc/bus/usb, but that is empty.
View 3 Replies
View Related
Mar 20, 2010
I am trying to install dynabolic on my system by docking.I copied dyne/ directory into my partition and updated grub as follows:
title Dyne
root (hd0,0)
kernel (hd0,0)/dyne/2618ckld.krn root=/dev/ram0 rw load_ramdisk=1 prompt_ramdisk=0
ramdisk_start=0 max_loop=64 vga=788
initrd (hd0,0)/dyne/initrd.gz
Still on booting into it,it is saying "No storage device with dyne system found"
why this happens? On the otherhand it is automatically detecting my pendrive in which i have copied dyne/
and boots from it.
View 1 Replies
View Related
