Ubuntu Installation :: Warcraft 3 Doesn't Open Properly?
Feb 14, 2010
I've had many problems with Linux so far. Here's just one: I love Warcraft 3. So I bought Reign of Chaos and The Frozen Throne today. I installed them correctly with WINE and tried to open. It starts to open like it does at internet cafes, so I think its fine. But then the screen resolution keeps changing and it doesn't get anywhere.
Next problem:I ask my friend who has warcraft 3 on Linux. He says you don't have the right drivers. I go to System > Administrator > Hardware Drivers and as he said the applet said: "No proprietary drivers installed". My friend says to check the Video graphics card. But I don't see where i can find what model it is. My computer is Compaq presario CQ60 with the default video/graphics cards. I know nothing about drivers, If I can't find a solution ill probably reformat my computer to Windows 7.
View 2 Replies
ADVERTISEMENT
May 5, 2011
I have a new installation of 11.04 with an ATI Radeon HD 2400 video card that previously worked fine under an earlier release.
I tried installing the proprietary drivers through the Additional Drivers section, rebooted and the video is choppy (dragging windows, etc).
From other reports around the Internet I've read, it's clear I'm not the only one experiencing this issue.
I tried the manual instructions, which turned out to be a mess and ultimately didn't work, either.
View 3 Replies
View Related
Dec 9, 2010
I downloaded wubi.exe from Opera 10.61. The file downloads ok, but then refuses to do anything when I click on the file.
I also switched to my IE version, and tried to run the file from there. Again, I get the hourglass symbol for a couple of seconds, then nothing.
I'm running Windows 98. I know, I should have a newer version, but finances can't manage that right now. In the meantime, is there a manual way to run the installer for wubi and get it to work?
View 2 Replies
View Related
Feb 18, 2011
When I try to open Ubuntu software center, it appears on the process bar for about 10 seconds before it disappears. I can't get it to start.
I have tried alt+f2 and typing 'software-center', didn't help. I tried reinstalling ubuntu software center in Synoptic package manager, but I got this error message: "E: /var/cache/apt/archives/software-center_3.0.7_all.deb: subprocess new pre-removal script returned error exit status 1"
This started to happen after I reinstalled Ubuntu 10.10. After I did that, I got the 'modprobe: FATAL: Could not load /lib/modules/2.6.8.custem/modules.deb, no such
file or directory.' error. Could these two problems be related in any way?
View 9 Replies
View Related
Mar 5, 2011
Many times it happens that when i shut down ubuntu 10.04 at that time it keeps on showing that screen which displays "Ubuntu" written & below it 5 dots. I waited for 15 minutes than also it keeps on showing that.I have to use hardware restart button in such case.What should i do?
View 2 Replies
View Related
Jan 7, 2010
I have Ubuntu 9.10 64-Bit. sometimes when i boot the computer, right after the grub loads, a black screen is displayed. It just says my computer's name and "tty1".It lets me enter my username and password. The system takes my password but the black screen remains.For some reason the word "ubuntu" with the loading bar does not appear like it is supposed to in this case. The system does not boot into my destop like it should.
This usually happens 1/4 times when i boot so i didnt pay much attention and would just restart the computer. However just 5 minutes ago i had to boot my computer 12 times to get it to boot into the desktop.
View 7 Replies
View Related
Jan 10, 2010
Whenever i close LMMS, it's still running in the background until i kill the process. How can i get it to exit normally?
View 2 Replies
View Related
Apr 11, 2010
Sometimes when I log on, I find that the theme (specifically the window borders and icons) didn't load properly, and that I instead get a set of grayish window borders (Raleigh, I believe) and the gray GNOME icons. Sometimes the window borders corrects itself, but the icons stay the same. Reloading compiz doesn't help, and the only solution I found was to logoff/logon.
View 6 Replies
View Related
Apr 13, 2010
I can't seem to install tofrodos on my Lucid box. Both dos2unix and unix2dos is missing - I don't have the todos and fromdos folders in /usr/bin/ either.
I've tried the following but it doesn't work:
Code:
sudo apt-get --purge autoremove tofrodos
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code]...
View 2 Replies
View Related
May 1, 2010
Once I updated to 10.04 I had some problems with my themes, but updated it and it works fine now. BUT, in firefox, 3.6.3 it looks like this:
I can only see the personas image at the tabs and the statusbar. Does anyone know how to fix this?
View 2 Replies
View Related
Apr 25, 2011
I am trying to install some packages in a ubuntu 8.10 server, however, apt-get doesn't work (I get several 'not found' errors). Is there any way to do that? I know this version is probably not supported anymore but I can't just format a customer server because it's OS is outdated...I just can't put my sources.list on it because I am on ubuntu 10.10 and it would download updates for the wrong OS probably causing a huge damage on the old one.
View 9 Replies
View Related
Jul 16, 2011
I tried to put Avast on my 11.04 machine, it didn't work, what's worse is that now only one kernel will work properly. any time i try any kernel other than 2.6.38-9-generic(it came with the install CD)the boot process stops at different points but it's during the time that it is starting and stopping processes. oh yeah, i've tried install different linux systems and they all work with what comes with the install cd but when i try to change the kernel same problem.
View 1 Replies
View Related
Sep 26, 2010
Ok For some reason I open my ports in security and firewall. I open ssh and other ports and port 7001 for example but when I go to check to see if they are open or try to connect to them. It shows that they are still closed. I am using - [URL] Also yes my ports are open on my router. I know my router works fine with opening ports because I have shoutcast setup on another computer with xp that is currently running. I am willing to pay for who can ever get this fixed for me...
I open the ports in graphical mode.
View 15 Replies
View Related
Jan 19, 2010
I am running ubuntu 9.10 on a dell mini 10v. I am experienced in running themes and xsplashes, but for some reason i can not successfully install pointers. I drag and drop the pointer themes to the appearance window found from System>Prefrences>Appearances. When i click customize i see that the pointers i instatlled are there, however when i choose them it doesn't work properly, if i go over text or resize a window i see the new pointers but the main pointer always stays the default white.
View 1 Replies
View Related
Nov 28, 2010
The web cam on my Dell Inspiron mini 10 doesn't work properly. Cheese only takes very dark pictures but no video and the main screen stays dark all the time. Skype transmits a very dark image, too. How can that be tweaked.
Bus 001 Device 002: ID 174f:1403 Syntek Integrated Webcam
View 4 Replies
View Related
Feb 12, 2011
It seems that I have been running Firefox unbeknownst to me with a broken configuration. It seems that if I enable the Quote: Allow pages to choose their own fonts, instead of my selections above in Edit->Preferences->Content->Fonts&Colors->Advanced, pages will no longer be render properly -- they are mostly blank.When running on the command line, I notice that I get errors from Pango (whatever that is) and think there may be a connection.
I tried doing sudo aptitude reinstall libpango-perl libpango1.0-0 libpango1.0-common libpangomm-1.4-1 but it didn't fix the problems. (I haven't yet tried uninstalling pango since it looks like it removes some crucial components.)I also tried sudo dpkg-reconfigure fontconfig and it didn't help.I'm guessing that the fonts cannot be scaled.This otherwise wouldn't be an issue, but it seems that some Firefox addons forcibly ignore the configured fonts and those pop-up windows are mostly blank/empty and therefore useless.
View 2 Replies
View Related
Feb 26, 2011
I have an Apple iBook (ancient I know) and whenever I boot from the Live CD (Kubuntu 10.10) it boots up in 800x600 (as far as I can tell that's what it is). This would be a problem however it simplely leaves a huge black column on the right side and has a partially duplicated desktop below it.
When I go to display settings it won't let me change to a higher resolution (1024x768 is what the iBook natively runs at).
This is an iBook G3.
View 9 Replies
View Related
Jul 16, 2010
Im on an inspiron 5100 laptop and i wanted to try out the new GNOME shell and every time i launch it it takes a long time then does not display correctly at all. forcing me to restart.
View 1 Replies
View Related
Mar 24, 2011
i will try to keep this post short and to the point. i am currently running debian with kde and i am trying to edit /etc/apt/sources.list. i know that this file needs to be opened as root for the changes to it to be saved, so what im doing (in konsole) is:
concreteabstract@debian:~$: su
Password:
root@debian: /home/concreteabstract# kwrite /etc/apt/sources.list
but that doesn't work, and the message i get is:
No protocol specified
kwrite: cannot connect to X server :0.0
View 5 Replies
View Related
Feb 7, 2010
So I installed pam-script
made this script:
Code:
#!/bin/bash
RFID_AUTH_SUCCESS=0
#Read the card
tag=`'/etc/rfid/RFID-login'`
code....
Code:
sudo test
It doesn't ask for my password and instantly authenticates as root!
if I run the above posted script manually, (cd into the dir and execute it), it works fine and produces the result 1 if positive and 0 if negative.
View 1 Replies
View Related
Oct 10, 2010
So far, as a former Chrome user on Windows, I am enjoying Chromium. However, there is one glaring problem that is bugging me, and is disrupting my usage of the browser.
Chromium will not show Japanese fonts properly. It's not that everything shows up as boxes. The problem is that certain characters will show in Japanese, and certain will show in Korean, thereby making the Japanese text unreadable. Copying and pasting into gedit allows me to read the Japanese text, and Firefox never had this problem, however, within Chromium, this is unreadable.
Here is a picture to show you what I mean:
Has anyone else had this problem, and fixed it? I have installed the language packs and have tried setting things to different unicode fonts and changing the encoding to unicode and even Japanese, and continue to get these errors.
View 4 Replies
View Related
Oct 17, 2010
I'm using Firefox 3.6.10 for Ubuntu 10.10 with the smooth-scaling ppa (only addons I'm using are Firebug and the Ubuntu modifications pack).Several sites with navigation menus the menu is spread over two lines when it obviously shouldn't be (eg. The Telegraph online, BBC News...) this happens no matter what the zoom level is set to. Chromium renders all these pages normally.
View 3 Replies
View Related
Dec 16, 2010
On Linux Mint FBReader (both the latest version and the one in the 10.04 repositories)displays Chinese characters as boxes(see screenshot) for some reason, but on Windows it works fine. Is there any way to fix it?
View 1 Replies
View Related
Sep 27, 2010
I have properly configured my router to open a port for Transmission and Vuze. The OpenSuSE firewall settings are somewhat confusing, however. How do I add a port specifically for the BT protocol? I know it's the firewall causing issues, because when I shut it down, my BT apps roar to life, and die with a whimper when I turn it back on. In Ubuntu, opening a port in the router is automatically configured in the firewall; that is apparently not the case with this distro.
So, when I go to Yast Firewall, I see "allowed services" under the tabs available. When I hit that tab, I see a dropdown menu that contains services such as NetBios Server and Samba Server. Am I choosing one of those available and adding a port to it? Am I adding a custom service via the Advanced settings, and if so, why isn't there a way to label the service so that it shows up under allowed services?
View 9 Replies
View Related
Dec 7, 2009
I just wanted to check, I'm using nouveau on Fedora 12 with the latest updates and each time I wake the machine from suspend, the fan on my XFX 8800GT goes to full speed and stays there. I've read some nouveau stuff and they say that nouveau doesn't control the fan speed, so I think the card is running in a safety mode after wake up where it runs the fan at full speed to be safe. The only suggestion I saw for fan speed and nouveau was to use nvclock to manually adjust the fan but that sounds dangerous to me. I think I'll just go to the closed rpmfusion driver then if this is the case.
View 3 Replies
View Related
Dec 26, 2010
I just tried to install qtparted ver0.4.5 on my computer to help partitioning my HDs.After doing the "configure/make"-sequence (using unsermake, as required), I received following error during compilation:
"qp_libparted.cpp:1751: error: �ped_free� was not declared in scope",My parted version is 1.9.0-3.7.1 from openSuSE 11.2.My question:
1. Do you know, which other library might contain this "ped_free"-declaration?
2. Any other perted GUI, that might work better (gparted is only available on a live DVD after boot)
View 2 Replies
View Related
Nov 1, 2010
I'm runnig f 13 on my laptop, and it runs like a charm. But once in a while, the internet doesn't seem to work properly. It mostly works, but right now i am unable to reach certain pages such at google (which is annoying), whereas other pages like yahoo and this one works perfectly well.
View 2 Replies
View Related
Sep 12, 2010
I had many trouble with my system the past two months. I thought i finally had it running flawless as i encountered another major issue: My Screen doesn't refresh properly (using GNOME). I have blank windows or windows showing old content which only gets updated when i minimize the window or move the mouse over them. And even then only small parts get really refreshed. Every Applicatio
View 2 Replies
View Related
Apr 26, 2011
In RHEL6 root's account I have crontab job: 30 6 18 4 1 /sbin/init 6 It worked fine on the 18th of April and properly restarted my system, BUT it also restarted my OS at 6:30 on next Monday - 25th of April.
View 2 Replies
View Related
Feb 17, 2010
I need to monitorize which Wi-Fi APs are in coverage, so periodically I perform a scan whith "sudo iwlist ath0 scan". The problem appears when disconnecting an AP (from the electrical network). In this case, iwconfig shows the disconnected AP during 30-40 seconds after the disconnection.
I'm trying to figure out how to order the kernel to actually refresh the list of in coverage APs, and avoid to show nets that were in coverage but aren't now.
View 2 Replies
View Related
