OpenSUSE Network :: Properly Open Port Through Firewall?
Sep 27, 2010
I have properly configured my router to open a port for Transmission and Vuze. The OpenSuSE firewall settings are somewhat confusing, however. How do I add a port specifically for the BT protocol? I know it's the firewall causing issues, because when I shut it down, my BT apps roar to life, and die with a whimper when I turn it back on. In Ubuntu, opening a port in the router is automatically configured in the firewall; that is apparently not the case with this distro.
So, when I go to Yast Firewall, I see "allowed services" under the tabs available. When I hit that tab, I see a dropdown menu that contains services such as NetBios Server and Samba Server. Am I choosing one of those available and adding a port to it? Am I adding a custom service via the Advanced settings, and if so, why isn't there a way to label the service so that it shows up under allowed services?
View 9 Replies
ADVERTISEMENT
Jan 15, 2011
I used to have Opensuse 11.0 and Vuze 4.0.2 and both were working great. Recently I upgraded to OpenSuse 11.3 and installed Vuze 4.5.10. I did not change any configuration in the ADSL router but now I could not get the smiley icon to go green. I followed all the steps given here: A Quick Bittorrent Guide (with screenshots). It doesn't work. so I modified FW_ROUTE and FW_MASQUERADE to yes in /etc/sysconfig/SuSefirewall2. That also does not work. What did I miss here? My ADSL router is DSL-2640T.
View 3 Replies
View Related
Aug 5, 2009
If I forward port 80 to port 3128 for squid with an iptable rule, does port 3128 have to be open on the firewall or is this all routed behind the firewall?
View 4 Replies
View Related
Mar 23, 2010
In the firewall, I opened port 5900 for TCP traffic. Now the console is displaying packet information whenever a connection is made. Why does it send a message to stdout/stderr for an allowed connection? How can I stop it? Logging level is set to critical only, and not-accepted packets should only be logged for the internal and DMZ zones.
View 1 Replies
View Related
Apr 27, 2010
I have a couple of openSUSE 11.2 machines and each is directly connected to the Internet (they are not behind a router, firewall, etc). I want them to be able to communicate without any firewall restrictions, but keep the firewall rules for all other IP addresses. Is this possible? the software package I'm trying to use randomly chooses a port to use in the range of 32768-61000 and I don't feel comfortable having a port range that wide open on both machines.
View 5 Replies
View Related
Jan 11, 2011
I have a question about /etc/services file. If I open ports in firewall, do I need to alter /etc/services file in order for certain apps to work?
kpasswd 464/tcp # kpasswd
kpasswd 464/udp # kpasswd
# Theodore Ts'o <tytso&MIT.EDU>
# 465 is illegal used by eMail Server
smtps 465/tcp # eMail Server
#urd 465/tcp # URL Rendesvous Directory for SSM
igmpv3lite 465/udp # IGMP over UDP for SSM
# Toerless Eckert <eckert&cisco.com>
digital-vrc 466/tcp # digital-vrc
digital-vrc 466/udp # digital-vrc
Above example shows if 465 tcp isn't altered, Postfix MTA fails to listen on 465 tcp port. What if there's a bigger span 3000:7000 TCP/UDP, is there a need to alter each line by hand?
View 2 Replies
View Related
Sep 3, 2009
I have a problem sending of file attachment using Instant Messengeri have a firewall using firestarter, if i used outside firewall they can able to recieve my file in instant meesenger but if i used firestarter it always cancelled my sending of file attachment....
View 3 Replies
View Related
Aug 26, 2009
I want to open port 2700 on my firewall but I don't know how I try with Code:iptables -A INPUT -i eth0 -p tcp --sport 2700 -m state --state ESTABLISHED -j ACCEPT But the port is not open I see the firewall configuration with the command setup . I use CentOS 5.3 here a screen of my configuration :http://upbg.net/out.php/i3537_sshot3.pngCurrently my firewall is off because I don't know how to turn on 2700 when the port is open I will turn on firewall .If I write 2700 in other ports field will 2700 be open ? Before 1 month I try but the port was not open . I have only 1 last question will firewall reduce the load of the my server now mysql use many CPU % and I just don't know why
View 14 Replies
View Related
Apr 17, 2011
I want to open the port 18680 on my remote Fedora 14 machine. I didsudo iptables -I INPUT -p tcp --dport 18680 -m state --state NEW,ESTABLISHED -j ACCEPTsudo iptables -I OUTPUT -p tcp --sport 18680 -m state --state ESTABLISHED -j ACCEPTsudo service iptables saveThe status returned is OK.I have also opened the port on my security group on Amazon. Also, I rebooted the machine.When I use the browser to view the application running at port 18680 the browser cannot connect.
View 1 Replies
View Related
Nov 16, 2010
How do I open port 8100? I am able to telnet localhost 8100 I can connect; but when I go to a client and telnet server_ip 8100 I get Connection refused. I can connect telnet server_ip 3306.
View 8 Replies
View Related
Jan 26, 2010
I am trying to make a vnc connection from pc #2 to pc #1. Pc #1 is a debian pc behind a zyxel router (P-2602HW-D1A). Pc #2 is a windows xp pc another place at the internet.I have configured the zyxel router to forward incomming trafic on port 5902 to the local ip-adress of the debian box. The debian box is running a vnc server, listening on port 5902.But i dosn?t work.I have tryed to scan the zyxel routers ipadress on port 5902 from the internet, but the scanner says that the port is closed.The vnc server on pc #1 is working fine on the local network. I can connect to the server from a pc on the same side of the zyxel router.Is it deffenitly a router problem, or could it have something to do with debians own firewall?
View 2 Replies
View Related
Apr 15, 2010
I have a problem with one of my new OpenSuse installation. I install ntop on this machine so the port 3000 become open, but when i want to use it on a other pc, it cannot see the open port. I really don't understand why i cannot access this port.
I disabled firewall to make sure everything pass.
Here my ntop on my localhost
Nmap done: 1 IP address (1 host up) scanned in 0.07 seconds
Here my ntop from another host
Nmap done: 1 IP address (1 host up) scanned in 0.07 seconds
View 2 Replies
View Related
Aug 16, 2010
How to open RTP UDP ports (port_number : port_number) in openSUSE 11.2 firewall with yast?
View 2 Replies
View Related
Jan 8, 2010
I'm encountering a strange problem. I need to open and forward all UDP and TCP ports related to VoIPtelephony (5000:32000) in the Suse 11.1 server that's acting as router/firewall in our setup. The ports must redirect to a Asterisk server in the local network. (This server has the IP adress 192.168.0.3)I've opened ports in Yast (Firewall>Ports>Advanced) and putted in some masquerading rulesirewall>Masquerading):0/0,192.168.0.3,tcp,5000:31000,5000:310000/0,192.168.0.3,udp,5000:31000,5000:31000when I do a nmap localhost I get:Starting Nmap 4.75 at 2010-01-08 16:52 CETInteresting ports on localhost (127.0.0.1):
Not shown: 991 closed ports
PORT STATE SERVICE
21/tcp open ftp
[code]....
View 9 Replies
View Related
Mar 25, 2011
I suspect this is an initial configuration bug. All firewall logs seem to be going to all
three files. That causes a lot of clutter in the log files, and makes it difficult to see whether there are any serious problems being logged.
View 9 Replies
View Related
Jul 28, 2010
I have just installed CentOS and it is working fine!I made a masquerade with the document there: I didn't used the script, because right now, I do not completely understand it, and obviously I am not modifying anything by leaving it like that.I was using Mandriva before and I am used to graphical tools My questions are:I add the following lines in my iptables:
[root@localhost ~]# service iptables stop
[root@localhost ~]# iptables -t nat -A POSTROUTING -o eth1 -j MASQUERADE
[root@localhost ~]# service iptables save
[code]....
View 1 Replies
View Related
Feb 10, 2011
Recommend open source tools that can help in figuring out if we are experiencing a network latency due to the newly installed firewall on our server.
View 1 Replies
View Related
Apr 7, 2011
In SuSE firewall0. I do have a openSuse 11.4 and multiple IP addresses on eth0 interface
I run (trying to/have to) multiple TOMCAT servers.
I am trying to have each tomcat instance listen to on separate IP address for example:
What i am trying to do is to redirect
a) tomcat 1 -
a) tomcat 2 -
And so on.
I know that it has to be possible.
I do have just eth0/
Is is it possible. Do I have to create "vittual interfaces"? eth0:1, .......... and do redirection ?
"Server" has got just single interface - just 1 ethernet calbe goes to that server. I am planning to have 10-15 tomcat's on that server (I have to unfortunatley) and each has to run on port 80
Is it possible to "grant" permissions to normal users to run app on port 80 - that would solve me lots of problems if impossible to redirect.
I tried to setcap 'cap_net_bind_service=+ep' /path/to/tomcat ...... but no luck
View 7 Replies
View Related
Jan 23, 2011
how to open firewall ports without using yast. The reason I'm asking is because I'm working on a .sh script for the installation of a couple of programs. Some ports need to be open for the programs to work, I find it really annoying to go to yast and type the ports manually every time. I've looked at /etc/sysconfig/SuSEfirewall2 but can't seem to find anything, I also know that after the changes I will have to stop start the firewall by running:
SuSEfirewall2 stop
SuSEfirewall2 start
View 4 Replies
View Related
Jun 20, 2009
I am running lmgrd on CentOS5, but it returns Failed to open the TCP port number in the license. The port is 27000, how can I open that port?
View 5 Replies
View Related
Apr 7, 2011
I want some advice for making my system more secure. I want deactivate any network connection that is unnecessary. Only my browser and the update ability of zypper should have access to the internet. On windows there are personal firewalls.
How can I block internetaccess for all other programmes on openSUSE?
View 8 Replies
View Related
Jul 26, 2010
Samba is working correctly if Susefirewall2 is off. I have added Samba client and Samba Services for extern access but samba is not working when firewall is now on. Which services should I also add ?
View 1 Replies
View Related
Sep 14, 2009
Recently after upgrading my kernel (via /repositories/Base:/Kernel/standard) I have had issues with the network not starting properly on bootup. The kernel is 100% SUSE-patched and behaves perfectly outside of that one issue. To get the network to "start" (DHCP issued, eth0 brought up) I have to 'rcnetwork start' in a shell. I've checked to make sure my config is right in both ifcfg-eth0 and 'config' for /etc/sysconfig/network, but nothing affects the outcome.
How do I get the boot scripts to bring up eth0 and issue a DHCP on startup?
Here's the output of 'rcnetwork start -o debug fake':
Code:
View 6 Replies
View Related
Mar 29, 2010
I am trying to add a custom allow rule in the firewall for a range of IPs from 74.201.102.0 - 74.201.103.255, what exactly am I supposed to enter in the source box? I believe I have to add two separate rules for 102 and 103, and I put /24 at the end of both, is this correct to get the whole range of IPs?
View 3 Replies
View Related
May 25, 2011
1. Under openSUSE 11.2, I allowed printer sharing through CUPS by setting the Firewall to Allow Services of CUPS in the External Zone section. I don't see the CUPS option in the Allow Services of the Firewall under 11.4, any zone. Is my system missing something?2. If I turn off the Firewall, the client computer can see the printers, even get the broadcasted names. If I put port 631 in TCP of the Advanced setting of the External Zone, the client computer can see the printer too, but I know I read somewhere that putting 631 in the External Zone is basically allowing printer requests from the entire internet.
View 2 Replies
View Related
Jul 27, 2011
I am facing two issues with CUPS - 1. I have installed cups 1.3.9 over OpenSuse11 x86. Please check below -
cups:/usr/share/cups/banners # cups-config --version
1.3.9
cups:/usr/share/cups/banners # cat /proc/version
Linux version 2.6.27.7-9-pae (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-12-04 18:10:04 +0100
I have added few printers over there and everything is working fine. I can also able to add - delete - modify any printers from "yast2 printer" command. I can also able to browse cups web interface via http://cups:631, but when I am going to manage the printers (start - stop - delete etc), none of the buttons are working in firefox5 not even in IE also. Older version of firefox is giving error as "This address uses a network port which is normally used for purposes other than Web browsing. Firefox has canceled the request for your protection." All other buttons are working properly.
2. LINUX - LINUX Printing - OK
LINUX - WINDOWS Printing - OK
WINDOWS - LINUX Printing - NOT OK
While giving printing from Windows machine (Printer attached on Linux), there is no problem to coonect the printers, but unable to print.
View 3 Replies
View Related
Mar 29, 2010
switched recently to 11.2 and it works fine for me as workstation I want to set up a router separating a part of the network and also acting as a firewall/proxy... Configured 2 Ethernet Interfaces, checked Ip forwarding in Yast but it does not forward the packets from the "internal" to the "external" network. Hovewer after I set up my router as default for machines on internal network I can ping the external interface but no adress on external network (particularly the one of the default router) !!! From the router I can reach both networks and the net via default gateway on external. Tried to:
a) switch firewall completely off
b) iptables -P FORWARD ACCEPT
c) masquarading internal adresses to the external network
my interfaces configuration looks like:
eth0 Link encap:Ethernet HWaddr 00:13:D4:E3:A2:7B
inet addr:192.168.1.34 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::213:d4ff:fee3:a27b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code].....
View 4 Replies
View Related
May 19, 2010
We have reason to ask this of you following some strange firewall behaviour - But don't panic If you use openSUSE 11.2 and you think: Your Firewall should be running You are not sure but think it should be check and report back here.
This is how to check:
Go to Yast > Security and Users > Firewall
View 9 Replies
View Related
May 27, 2010
I did a shields up test and it told me that 1056 ports were stealth but that my pc responded to ping and was visible on the net. How do i fix this?
View 4 Replies
View Related
Jul 13, 2010
I can't get my openvpn work if the firewall is on , and I also don't see any option to allow openvpn service in firewall allow service.
View 1 Replies
View Related
