The web cam on my Dell Inspiron mini 10 doesn't work properly. Cheese only takes very dark pictures but no video and the main screen stays dark all the time. Skype transmits a very dark image, too. How can that be tweaked.
Bus 001 Device 002: ID 174f:1403 Syntek Integrated Webcam
i have sony viao vgn-fz11 Can someone please help ,im new user to ubuntu been trying to get webcam working properly at the moment its upside down and does not work in skype at all just get black screen does this look correct? do i have the right driver?i will try and give as much information as i can.
View 1 Replies View Relatedhow to make creative web cam working with ubuntu
View 1 Replies View Relatedl installed thelatest beta version of skype from officila skype on my ubuntu 9.10,but my webcam doesn' t work and l can not see other webcams, lt work correctly with amsn and cheese
View 1 Replies View RelatedI got a webcam and it works fine with cheese, skype and many other programs. But with jmf or mplayer it doesn't work.
With mplayer I used this command mplayer tv:// -tv driver=v4l:width=640:height=480:device=/dev/video0
Both jmf and mplayer just give static looking like this [url]
I have a webcam in my monitor (Acer H243HX). It is seen by the system (11.4):
Code:
> kernel - - - [302942.719649] usb 2-5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[code]...
I'm using a basically vanilla Lubuntu 11.04 My Logitech E 3500 webcam works fine with Cheese. I have just installed Skype, but my voice isn't picked up on the test call, and no video either (the webcam light remains off). I've tried logging off and into Skype.
View 5 Replies View RelatedI'm using the 10.04 Netbook Edition on an ASUS EeePC 1005HA. Earlier, I had 9.10 Netbook Remix installed. Under 9.10NR, the webcam worked wonderfully in Cheese. Once I upgraded to 10.04NE, the webcam became sluggish to the point where it is now unusable. In video mode it captures about 1 frame per five seconds. Under 9.10NR, it regularly captured 60 fps.
Did the driver package for webcams change significantly between 9.10 and 10.04? I can't think of anything else that would cause this issue due to an OS upgrade.
I have this annoying problem since day one.I am testing out Red Hat RHEL5, everything is fine except DNS look up.If I ping www.google.com, it doesn't work, ping ip address it all works;if I bring up browser, put www.google.com it doesn't work, can't find the name, however, simply put ip address there it works.My DNS seeting seems ok, and the DNS works from Windows box.
View 2 Replies View RelatedI have difficulty with my webcam and Skype. I can see the other person but she can't see me. From a previous thread: Are you sure your camera isnt working? Supported hardware drivers are in the kernel usually. Test: press alt+f2, type gstreamer-properties go to the video tab and see if your camera is listed as a device. If yes, press the test button. This test was OK. I could see my face on the screen.
Quote: Ah, the Skype camera thing. Launch it this way: LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so skype
I tried this. It launches Skype OK, but the little window that should show what my webcam sees, appears full of black and white static.
So I tried skyping this morning and I could not get my webcam to work it seemed like ti wasn't turning on. TO double check that it just was not skype I opened up Cheese the webcam picture application and it said "no device" found.The only thing I have really changed on my computer since I last skyped were just system updates so something broke in it.
View 1 Replies View RelatedI cannot use my motion eye webcam, here's the result of
Code:
lsusb
Code:
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 05ca:1839 Ricoh Co., Ltd Visual Communication Camera VGP-VCC6 [R5U870]
i cannot use cheese, is there anyone know how to fix this problem?
My webcam worked with every application in Linux Mint6. I just upgraded to Ubuntu 8.04 and find that the input from the webcam looks like a green TV without horizontal lock in Camorama and Skype. However it works perfectly with Cheese.
View 1 Replies View RelatedOnce I updated to 10.04 I had some problems with my themes, but updated it and it works fine now. BUT, in firefox, 3.6.3 it looks like this:
I can only see the personas image at the tabs and the statusbar. Does anyone know how to fix this?
I am trying to install some packages in a ubuntu 8.10 server, however, apt-get doesn't work (I get several 'not found' errors). Is there any way to do that? I know this version is probably not supported anymore but I can't just format a customer server because it's OS is outdated...I just can't put my sources.list on it because I am on ubuntu 10.10 and it would download updates for the wrong OS probably causing a huge damage on the old one.
View 9 Replies View RelatedI am running ubuntu 9.10 on a dell mini 10v. I am experienced in running themes and xsplashes, but for some reason i can not successfully install pointers. I drag and drop the pointer themes to the appearance window found from System>Prefrences>Appearances. When i click customize i see that the pointers i instatlled are there, however when i choose them it doesn't work properly, if i go over text or resize a window i see the new pointers but the main pointer always stays the default white.
View 1 Replies View RelatedI can't make a webcam working on an ARM version of Debian (Raspbian for raspberryPI)
I'm trying to use a command line media player to show the webcam images (mplayer)
The command is: mplayer tv:///dev/video0 and I got this output:
Code: Select allPlaying tv:///dev/video0.
the filename option must be an integer: dev/video0
Struct tv, field filename parsing error: dev/video0
Tv file format detected.
Selected driver v4l2
[Code] ....
Note aside:
- I've tried 3 different cams(got the same error for all of them)
- The output of the command: ls -ltr /dev/video* is crw-rw—-+ 1 root video 81, 0 Nov 11 09:06 /dev/video0
- The cam works in a program like "scratch" in a startx session but doesn't in the command line
So I installed pam-script
made this script:
Code:
#!/bin/bash
RFID_AUTH_SUCCESS=0
#Read the card
tag=`'/etc/rfid/RFID-login'`
code....
Code:
sudo test
It doesn't ask for my password and instantly authenticates as root!
if I run the above posted script manually, (cd into the dir and execute it), it works fine and produces the result 1 if positive and 0 if negative.
I have a new installation of 11.04 with an ATI Radeon HD 2400 video card that previously worked fine under an earlier release.
I tried installing the proprietary drivers through the Additional Drivers section, rebooted and the video is choppy (dragging windows, etc).
From other reports around the Internet I've read, it's clear I'm not the only one experiencing this issue.
I tried the manual instructions, which turned out to be a mess and ultimately didn't work, either.
my Logitech webcam C 200 under openSuse 11.2-2.6.31.5 appears as046d:0802, but in Skype I cannot see any image when testing the webcam. The correct audio input cannot be chosen either, it does not even appear in the drop-down box.I've installed the same webcam on a different machine with openSuse 11.2 and it worked out of the box, so I don't think there should be any additional driver required.
View 1 Replies View RelatedI'm runnig f 13 on my laptop, and it runs like a charm. But once in a while, the internet doesn't seem to work properly. It mostly works, but right now i am unable to reach certain pages such at google (which is annoying), whereas other pages like yahoo and this one works perfectly well.
View 2 Replies View RelatedIn RHEL6 root's account I have crontab job: 30 6 18 4 1 /sbin/init 6 It worked fine on the 18th of April and properly restarted my system, BUT it also restarted my OS at 6:30 on next Monday - 25th of April.
View 2 Replies View RelatedMy webcam was working when I installed Fedora12. But now it doesn't work after about 2 months of playing with this OS. Because of this, I decided to reinstall it's driver.I downloaded it from ATrpms website, but if I try to install it the terminal says"/boot/vmlinuz-2.6.31.12-174.2.3_1.cubbi_tuxonice.fc12.x86_64 is needed by uvc-kmdl-2.6.31.12-174.2.3_1.cubbi_tuxonice.fc12-0.20090806-4.fc12.x86_64"File needed: /boot/vmlinuz-2.6.31.12-174.2.3_1.cubbi_tuxonice.fc12.x86_64File wanted to be installed: uvc-kmdl-2.6.31.12-174.2.3_1.cubbi_tuxonice.fc12-0.20090806-4.fc12.x86_64
View 4 Replies View RelatedWe have a Blade server connected to a two internal ESM Cisco switch. We want to have a active-backup configuration with bonding. We follow the documentation and we hace configured the next:
Centos 5.5
ETH0:
[root etc]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Broadcom Corporation NetXtreme II BCM5709S Gigabit Ethernet
DEVICE=eth0
[Code].....
I'm running Ubuntu 10.04 on my MSI-16362 laptop and it doesn't recognize my built-in webcam. last time I used Ubuntu (9.04 I think) it recognized the LT webcam w/o any problem. Does someone has any idea how to fix it?
View 2 Replies View RelatedI had originally followed the advice at Mauriat Miranda's Fedora Nvidia Driver Install Guide [URL] for installing nvidia's display driver on my HP Pavilion system 64 bit running Fedora 11. I had used his first method which just installs the relevant kernel module kmod-nvidia from RPMFusion. He also suggested an alternate method: obtaining Nvidia's installer NVIDIA-Linux-x86_64-185.18.36-pkg2.run and using that. I downloaded it from Nvidia, but I didn't run it.
I recently lost X. This had happened previously after a kernel upgrade, and I just used grub to boot an earlier kernel to recover X, and then installed the upgraded kernel module to fix the problem. But this time, being deeply involved in something else, I panicked slightly, and, using dumb terminal mode I ran the Nvidia installer. It asked me to make various choices and in response to my answers, it decided to compile a new kernel module. This recovered X, but I then compounded things by installing the updated kmod-nvidia.
I realized afterwards that using both methods might create some conflicts, but X seemed to run properly. (I can tell because graphics in the program Maple doesn't work properly with the default drivers provided by Fedora 11.) Since then, when I restart nvidia, I get.
[Code]....
My contact doesn't get the request to start webcam, I was just wondering if any of you can help me resolve my issue?
View 2 Replies View RelatedI'm using Wubi to dual boot 9.10 off windows xp. I have been having very good luck figuring things out using this ubuntu forum, which I am more grateful for than any of you could ever imagine, But I have a webcam issue I just can't figure out. Heres my question. I just recently bought a VERY cheap usb webcam from a company named HDE. There doesn't seem to be a specific name or even model number for this webcam, but here is the web page of the webcam I bought, http://www.hdeshop.com/USB-3-LED-PC-...B0015TJNEY.htm The website only provides drivers for windows vista and windows xp, but I figured there might be a chance or possibility that I could force this webcam to work on ubuntu 9.10. I plugged in the webcam and it did show up in skype, but the picture is all green and there is a double of me.
Plus, the actual webcam device will not show up in skype, I can't select the webcam, but regardless it still shows a green double vision image when I test it or do a video call.Skype seems to be the only thing this webcam kind of works with, It will not work with Cheese though and doesn't show an image in gstreamer. I want to mention that when I go to Cheese Preferences there is a webcam device that appears and sayse "USB 2.0 Camera (/dev/video0)" but I can't select it. I'm not sure what to do about this or how to fix it? I've searched around the internet and read the ubuntu documentation on webcams but really haven't had any luck for my specific webcam. I would just like the webcam to be detected by ubuntu 9.10, to work properly in skype, and work in cheese so I can record video's.
I just recently bought a VERY cheap usb webcam from a company named HDE. There doesn't seem to be a specific name or even model number for this webcam, but here is the web page of the webcam I bought, http://www.hdeshop.com/USB-3-LED-PC-...B0015TJNEY.htm The website only provides drivers for windows vista and windows xp, but I figured there might be a chance or possibility that I could force this webcam to work on ubuntu 9.10.
I plugged in the webcam and it did show up in skype, but the picture is all green and there is a double of me. Plus, the actual webcam device will not show up in skype, I can't select the webcam, but regardless it still shows a green double vision image when I test it or do a video call. Skype seems to be the only thing this webcam kind of works with, It will not work with Cheese though and doesn't show an image in gstreamer. I want to mention that when I go to Cheese Preferences there is a webcam device that appears and sayse "USB 2.0 Camera (/dev/video0)" but I can't select it. I'm not sure what to do about this or how to fix it? I've searched around the internet and read the ubuntu documentation on webcams but really haven't had any luck for my specific webcam. I would just like the webcam to be detected by ubuntu 9.10, to work properly in skype, and work in cheese so I can record video's.
I'm trying to get my Logitech webcam to work. I don't know the exact model but it's a round globe.
Lsusb says-
Bus 002 Device 004: ID 046d:08f5 Logitech, Inc. QuickCam Messenger Communicate
I've tried Cheese, VLS but no video as of yet.