Ubuntu Installation :: Upgraded To 10.10: X Won't Start (Intel Graphics)
Oct 12, 2010
I have just upgraded and now X won't start and remove xorg.conf etc doesn't fix it...
This is a nettop with standard Intel graphics - no NVidia chipset (inc Ion).
This machine has been upgraded through various versions so I suspect there may be an old file somewhere which is causing this.
This is what is shown in the log:
[ 1211.411]
X.Org X Server 1.9.0
Release Date: 2010-08-20
[ 1211.411] X Protocol Version 11, Revision 0
[ 1211.411] Build Operating System: Linux 2.6.24-27-server i686 Ubuntu
[Code]....
View 9 Replies
ADVERTISEMENT
Nov 30, 2014
I have an HP pavilion laptop with core i5 4210U that has intel HD4400 graphics. I installed debian wheezy 7.7 after shrinking win 8 and freeing 350GB for debian. I went through the hurdle of making a UEFI bootable USB drive and the system dual boots fine. But once I boot debian, I get all the run time messages and then login prompt flashes and the whole screen is blank except for a prompt on top left. I can open a terminal but that's about it. I'm unable to remotely login (connection refused) from either windows using moba terminal or another debian machine.
I searched the internet and found : [URL] ....
I tried the apt-get but it failed saying:
Code: Select allE: The value "wheezy-backports" is invalid for APT::Default-Release as such a release is not available in the sources
In case I have to install Debian testing version that some said worked, how do I get rid of my current installation, which is UEFI? Do I just erase its partitions in windows? Then what happens to its UEFI boot manager? Just leave it there to rot? If I install again with debian testing version, I envision some problems of the grub UEFI boot manager thinking that the debian 7.7 is still there and try to boot to it. I do have the partition images in partition manager home version 12 so I could just restore the UEFI partition.
HP Pavilion 15
Core i5 421-U
4GB DDR3L
750GB WD hard drive
15.4" 1366*786
View 14 Replies
View Related
Jan 26, 2010
I have just installed Ubuntu (9.10) and noted that in order to successfully run the trial off the CD I had to test in "safe graphics" mode. I have an NVIDIA GEforce 6600 GT card - which was discovered by Ubuntu in the first few minutes of the trial and so I activated the recommended driver and continued to test. After a successful trial I installed Ubuntu (dual partition Ubuntu / Windows XP), however, it seems the install didn't activate the required driver (as part of the process) and so I'm unable to get into my newly-installed Ubuntu at all. All I get is a flashing tty screen asking for my username and password - however it's erratic and won't recognise what I type. So - I'm stuck in a catch-22 as there doesn't seems to be a safe graphics mode option via the start (GRUB?) menu list.
View 4 Replies
View Related
Jul 12, 2011
I have a development server that I have attempted the 9.10 -> 10.4 LTS upgrade on to see if there were any problems. (Another catch is that I am running PHP 5.3 and 5.2 concurrently, and this has been successfully done.)
MySQl fails to start:
Quote:
root@dev11:/var/run/mysqld# /etc/init.d/mysql start
* Starting MySQL database server mysqld
...fail!
Checking /var/log/syslog:
[Code]....
P.S. This server has had MySQL running for some time. There are databases on there, but again they are used in development only. I'd rather not uninstall/reinstall.
View 1 Replies
View Related
Oct 19, 2010
I am trying to install Ubuntu 10.10 on an Lenovo G560 laptop with Intel P6100. Everything seems to work fine except for the graphics. The screen goes blank when I enter startx from the console.
lspci shows the following for the graphics card : 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) In xorg.conf, I've tried drivers 'vesa' which gave me low resolution, and also 'intel' which blanked the screen again. How do I configure this graphics card ? Has anyone else faced similar issues when installing Ubuntu on this graphics card?
View 2 Replies
View Related
Aug 18, 2010
! I'm thinking of buying a corei5-660 on a motherboard with an Intel H55 Express Chipset. Does anyone know if it's fully compatible with OpenSUSE 11.3? I mean video (that comes from the processor, not an off-board PCI), audio (HD Audio), networking (Intel� 82578DC Gigabit), SATA Controller, USB, etc. I've tried to google but didn't find much info so I wonder if anyone is using or knows where I can find more info about it...
I have found this thread on the forums about the H55 chipset: Core i3 Intel Clarkdale graphic controller problem But the problems were facing on 11.2, I don't know about 11.3...
View 8 Replies
View Related
Jan 2, 2011
I've installed Suse linux 11.3 (kernel 2.6.34.7-0.5) on my brand new computer HP all in one 5130. Everything worked incredibly well : Wifi, wireless keyboard and mouse, sound, webcam.. There is only one remaining issue : I get a very poor resolution (1280x1024) instead of the 1920x1080 allowed by the screen. The graphic card is an intel chipset (HD graphics) integrated to an intel core i3 CPU. Here is (part of) the X11.org log :
Code:
X.org X Server 1.8.0
Release Date: 2010-04-02
[ 15.124] X Protocol Version 11, Revision 0
[ 15.124] Build Operating System: openSUSE SUSE LINUX
[ 15.124] Current Operating System: Linux linux-7xhd 2.6.34.7-0.5-desktop #1 SMP PREEMPT 2010-10-25 08:40:12 +0200 x86_64
[Code]....
View 9 Replies
View Related
Jan 27, 2011
I have been trying to enable compiz on my fedora 14, but when i enable the desktop effects the graphics just crashes and fedora freezes. When i type lspci -nnk | grep VGA for the graphics card i get:
I made alot of research on how to get Intel graphics work on Fedora, but couldnt find any solution
Same problem I had with Fedora Core 12 and 13.
View 5 Replies
View Related
Jan 2, 2010
My computer is Compaq Presario CQ61-110ED notebook pc Mijn videocard is:Intel Graphics Media Accelerator 4500MHD Where can I download a driver for Intel Graphics Media Accelerator 4500MHD by the Ubuntu 32/64 bits, version 9.10?
View 3 Replies
View Related
May 27, 2011
[A word of explanation: initially the post below followed a post by Adam Williamson in another thread devoted to inability to load GNOME 3 in VM; this is why I address Adam in the opening.]
Adam, the situation with the GNOME 3 support for Intel integrated graphics seems to be a little confusing. You are probably among the most competent to clarify it.
Let me tell my own story first.
I was installing earlier today Fedora 15 on an HP dm4-1160US laptop with i5 and Intel graphics, and the anaconda installer hung right after "Waiting for hardware to initialize..." flashed on the screen, before even Media Check screen was reached. I tried a few times, always with the sae result: anaconda hung. Then I decided to add nomodeset to the boot parameters and the anaconda installer went on and I was able to complete the installation without a slightest problem.
I rebooted and without a problem reached the GDM login screen. When logging into GNOME, a pop-up window informed me that the system was unable to load GNOME and that instead I would be logged into the fall back mode. By the way, I haven't experienced the problems that plagued "Classic GNOME" on another laptop of mine where instead of clean install I preupgraded from Fedora 14 (strictly following the guidelines for preupgrading).
Wireless card was recognized and wlan initialized, nearby wireless networks seen, yet I wasn't able to connect to my own wireless network (I tried to do this already in the process of installation, equally unsuccessfully).
I was able to connect via Ethernet cable, and then I proceeded to perform yum update.
The update brought a new kernel. I went into grub.conf and noticed that nomodeset has been automatically added to the boot parameters for each of the two kernels. I decided to perform an experiment: I removed nomodeset from the boot options for the new kernel, and left it in place for the anaconda installed kernel.
I rebooted into the new kernel. Right after the grub menu disappeared, the screen turned pitch black and stayed this way for good 10 seconds. I thought that the former situation repeats itself making impossible to boot without the nomodeset option. Suddenly, the screen lit up and the GDM login screen appeared.
I logged into a shiny GNOME 3 where I am writing these words right now. Ah, and I was also able to connect to the wireless (I made yet another attempt using the network manager applet -- this time it worked).
What does that seem to indicate? That GNOME 3 support is already available for Intel graphics chips? But one may need to play with the nomodeset cheatcode, as I described this above?
View 8 Replies
View Related
Jul 27, 2011
i've been trying to load F15 on a HP DV4 (switchable ati/intel graphics, no hardware switch). the system boots from dvd fine, but gets stuck right after the starting anaconda message with a non blinking cursor on black screen and nothing happens after that.
View 2 Replies
View Related
Sep 13, 2010
I have just reinstalled testing on a Samsung Q30 and I cant get X to start. I am just left with a blank screen and ctrl+alt+Fn does nothing. I had a previous install of testing that worked fine but it might have been running a previous version of the kernel, or I had installed a bug fix to do with 915resoultion that I can't remember about. Booting off a Slax live cd works fine but I have had similar problems with Knoppix and Ubuntu.
I am running LXDE but I previously tried Gnome and had the same problem. Running xander displays cant open display Running dpkg-reconfigure xserver-xorg returns nothing, as does Xfree86 -configure There is no /etc/X11/xorg.conf or installed by default, I have tried running startx with a custom xorg.conf and the automatically generated one from -configure. The automatic one did not include any resolutions and was configured for a dual head set up although there was only one monitor connected.
I thought it may be the same problem as this:[url]
But I have tried following the bug fixes on that site and I have had no luck.
lspci
Xorg.0.log
View 1 Replies
View Related
Jan 16, 2009
How to enable Desktop Effects with Intel on board Graphics Card on Fedora 10?
View 1 Replies
View Related
Jul 20, 2009
I cannot install FC11 or FC10 on my Dell XPS One/A2420 machine. Every time I tried to install the Linux operating system, the screen goes black and the computer goes no response. It seems to have something to do with the video card--Intel GMA X4500HD Graphics.
View 1 Replies
View Related
Jun 17, 2010
I am trying to install ubuntu 10.04 to my raid 1+0 array. Install just sees four different hd:s
main-0
main-1
storage-0
storage-1
There is not showing any size or anything. I have set two raid arrays: main and storage, both with 4-hard-driver (raid10). Storage array is partitioned to 1TB and 400GB partitions, 400GB partition is where i want to install ubuntu. Main array has windows already. Where to go next?
root@ubuntu:~/src# dmraid -ay
RAID set "isw_beieefiehj_main" already active
RAID set "isw_beieefiehj_storage" already active
RAID set "isw_beieefiehj_main1" already active
RAID set "isw_beieefiehj_storage1" already active
root@ubuntu:~/src# parted_devices .....
View 2 Replies
View Related
Apr 16, 2010
My new motherboard has built in intel G41 graphics card. Problem is under ubuntu maximum resolution is something like 1300 x 1024, in windows the highets working is something like 1900 x 1200.How can I achieve the maximum resolution or near maximum on ubuntu 10.04, also note that I have the same issue on 9.10.I looked for the xorg.conf to try and manually set the resolution but the file does not exist in 10.04
View 2 Replies
View Related
Jul 30, 2010
Have a reasonably old HP D510 running onboard Intel 845G graphics, which has worked fine to date using Suse 10/11.x x86 and also have tried various Ubuntu breeds on it before, as well. Have just installed Kubuntu 10.04, and am having issues that irregularly, and apparently randomly, screen goes black and I get a message saying "Ubuntu is running in low-graphics mode".
I OK this and get a messages asking me what I would like to do:
1 Run in low graphic for this session
2 Reconfigure graphic
3 Troubleshoot
4 Exit to console
5 Restart x
Basically, none of these work. If I click 2, there are a number of choices which don't work, can only cancel. Basically the only fix is a reboot, and it will again work for a 'random period of time'. Have never had this issue previously, so it is obviously something that has been introduced with 10.04? Briefly installed Ubuntu 10.04 prior to Kubuntu, and think I had the same prob.
View 3 Replies
View Related
Aug 3, 2010
I know that you can have a nice control center if you have nvidia or ati drivers installed. Is there such a thing for intel graphics (Intel GMA or HD graphics)?
View 2 Replies
View Related
Nov 7, 2010
I need to use my TV as a monitor via DVI.
Using Meerkat 64. Here's some specs:
Code:
Because the Physical ID is 2.1, I'm fairly certain this is the DVI port. Do I need a driver for this to work?
View 7 Replies
View Related
Jan 27, 2011
I just installed Ubuntu 10.10 on my Dell Latitude D430 that I use at work. I have it on my desk docked going to a Dell LCD Monitor. When I go into the monitor set up it says Unknown for the monitor and Laptop for the actual laptop display. Also, I have very low resolutions for the "Unknown" monitor.
I am trying to resolved this issue so that I have better resolutions on the external monitor and then I can try to extend the desktop between 2 screens.
I found something online about adding the intel PPA and I did that, but now what. There is no xorg.conf that I can find for 10.10.
View 7 Replies
View Related
Jun 28, 2015
I just installed Debian 8.1 with Mate desktop environment. I have a laptop with Intel® HD Graphics 5500.When I try to play a game like Left 4 Dead 2 or Torchlight 2 I get extremely low FPS.I also have Ubuntu 14.04 Mate on another partition. The games run fine there.I don't understand why this big difference. Maybe I have to install or configure something..
View 4 Replies
View Related
Mar 21, 2010
How do I know if my intel chipset graphics card thing is installed?.
View 1 Replies
View Related
Jul 23, 2010
I honestly have no clue how this happened, but compiz now refuses to start. I discovered that somehow GLX had been uninstalled and replaced by SWX (the software rasterizer - this gives Brian Paul as the OpenGL/GLX server vendor strings). Reinstalled GLX, currently have Direct Rendering and the proper vendor strings (SGI and Tungsten, I believe).Still nothing. OpenGL seems to be working fine, as Nexuiz runs pretty well.I tried running compiz --replace from the terminal to get any errors, but it just spits out "Falling back to default window manager", without so much as a hex code to tell me why--------Update---------Ran compiz --debug --replace to see if I could get anything else. It gives the following:Quote:taintsauce@the-****ing-fury:~$ compiz --replace --debugcompiz (core) - Debug: Could not stat() file /home/taintsauce/.compiz/plugins/libcore.so : No such file or directorycompiz (core) - Debug: Could not stat() file /usr/lib/c
View 1 Replies
View Related
Oct 21, 2010
Just spent about 4 hours upgrading from 9.10 to 10.04 thinking it would fix my graphics problems. Basically I have no 3d acceleration of any kind, is there any way i can load the intel drivers? Because what I'm using now is really crappy.
[code]...
Can i just change something in my xorg to intel and it will load that driver ? I've tried the "hardware drivers" thing but it does not show anything.
View 1 Replies
View Related
Nov 28, 2010
I am totally new to Ubuntu but have been tinkering for a week now. Can't say I have figured a thing out, thank God for Google, Linux is just not for the novice user. I guess thats where Windows comes in but I really like the stability of Linux and the fact it is Open Source and free. Wish I was a cool programmer or someone who has worked with the OS for a while, that would make things a lot easier. Where can I study up and get a little more educated about what I am doing? Anyway hopefully someone can answer the driver question. Lastly is there anyway to get Hardware Acceleration if using an Intel i5 system?
View 3 Replies
View Related
Sep 1, 2011
in ubuntu land i have been thinking and i have intergrated HD graphics on my craptop i bought it for my study so it doesn't really matter but my theoretical max graphic memory is 3GB and i am only using 128 MB now has any one figured out a way to alter the default ;/. im sure it is possible to increase processing power form the split with CPU to but im sure acer have locked such capability.
View 5 Replies
View Related
Aug 18, 2010
i previously posted a thread http:[URL].. that was regarding gaming issue, but now i got a bigger issue. i installed Intel 2010Q2 graphics package from [URL].. i first upgraded xorg-x11-server and related packages and installed devel package using yum.. later i compiled and installed kernel 2.6.34 and other packages included on [URL].. i rebooted the system and it showed display driver unknown so, i used system-config-display --reconfig and it detects my mobile 4 intel chipset. and when i reboot, GUI won't load .. when services finish loading screen goes blank and harddisk light blinks at constant intervals and i can't switch from GUI to CUI either using CTRL + ALT + F2 etc [URL].. PS i am able to login into single user and change xorg.conf
View 6 Replies
View Related
Dec 13, 2010
Purchased a slightly used T61 Thinkpad via a client of ours at work last week. I've been really happy with it so far, dumped 4GB RAM in it and have Vmware workstation running on it and all is well except the graphics drivers.
According to LSPCI the machine contains the device listed below.
Code:
X displays just fine and compiz works out of the box, but I'm only getting around 59 FPS with GLXgears. I do like to play the occasional game and what not, so i'm really hoping to get this increased. I've heard of running Tremulous on this card, so I imagine it can do it.
Is this low for this card?
View 2 Replies
View Related
Jul 29, 2011
Do Intel HD 3000 Graphics run out of the box on Linux? Or do I have to do some manual work to get it working? Does Intel develop open source drivers?
Are they faster than on Windows?
This would apply for any Linux distribution.
View 1 Replies
View Related
Apr 16, 2010
I am running kubuntu 9.10 on a dell inspiron 14 with an intel GM45 graphics card. When I run 3d games like Nexuiz, openarena and tremulous I get really random performance. Sometimes things are totally playable with somewhere between 50-80 fps and other times I get maybe 4 fps and everything takes forever to load. These effects persists between logouts, X restarts and reboots! I get no errors when I run things in console either.I never really play games much but when something doesn't work...
View 8 Replies
View Related
