My computer is Compaq Presario CQ61-110ED notebook pc Mijn videocard is:Intel Graphics Media Accelerator 4500MHD Where can I download a driver for Intel Graphics Media Accelerator 4500MHD by the Ubuntu 32/64 bits, version 9.10?
View 3 Repliesfor some reason the drivers for my laptop graphics are not showing up.
The laptop I have is Acer 1810T. It has intel GMA 4500MHD graphics.
I also have a desktop which has Nvidia 9800GT graphics card and the drivers for that showed up automatically when i went to additional drivers in ubuntu.
i upgrade a machine running centos 5.4 to 5.5 this morning. After the update the X start i saw the pointer and a black backgroud only the desktop doesn't appear.The machine is a barebone with this configuration
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)[code]....
and i solved the black screen problem changing the driver for i810
Section "Device"
Identifier "Videocard0"
Driver "i810"
EndSection
i am using fedora 14. i need graphics driver for Intel 82579v . while moving folders it shows poor graphics.Login screen open as step by step. while playing videos ,it hang.my system is very slow now with high configuration. My system hang while improve graphics option in System-> Preference->Desktop Effects and select compiz and
View 1 Replies View Relatedwhat all graphics functionality does Intel's i915 graphics driver support?( blending,blitting ).By looking at the source code it appears to me that it support just 'fill rectangle' and 'image blitting'.Is that all?
View 1 Replies View RelatedI want to downgrade my Intel driver to version 2.11.0. I don't know what version I have at the moment but I have installed Fedora 15 (Lovelock). The reason is that Office 2007 has graphical bugs with Intel drivers that are newer than 2.11. So, will my gnome shell work fine after the downgrade and how to downgrade? I have searched a lot from google but didn't find any solutions.
View 3 Replies View RelatedMy system occasionally, not often, but enough to bring me to do something about it, keeps freezing. Hard lock-ups. This is a known bug for openSUSE 11.3 and intel video cards. So, I tried some suggestions and updated my kernel to 2.6.35. Nope. Same prob. I updated Xorg, mesa, drm, cairo (had to go to Factory for that one). I finally got all the requirements met as listed on Intel Linux Graphics: 2010Q2 and I download the intel 2d driver, since it's newer than what comes with openSUSE, even in Factory (xorg-x11-driver-video-intel-legacy 2.9.1).Now, when I go to compile the driver, it errors out on ./configure.how do I let this intel driver package know where xorg-server is?
View 3 Replies View RelatedI've been using Mandriva (and predecessors) for ten years or so, but that distro really seems to be dying at the moment. Consequently, I am trying to move over my various PCs to SUSE. I've started with my EEEPC 901 which has a 945GME integrated graphics chip. Using Mandriva 2010.2 it works fine and I can have desktop effects (built into KDE) running with no problems. However, with KDE on openSUSE 11.4 I get irregular freezes, although I can still work within the focussed window. Moving around though, clicking on other parts of the desktop etc. doesn't work, then after a few seconds they all happen at once. I am getting the following error multiple times in the X log, which I suspect is associated:
Code:
EQ overflowing. The server is probably stuck in an infinite
loop.
I note this supposedly fixed bug report that may be relevant:[URL].. Secondly, I am getting hopeless 3D speed (glxinfo reports SGI and has all expected output). Desktop effects won't work at all, on boot it pops up a message saying they are disabled as too slow. I know it isn't a benchmark, but glxgears gives about 50, it used to give over 500. I remember a few X versions back having to enable UXA mode instead of EXA in the 'intel' driver, but presumably that is no longer needed and I cannot see any effect of doing that now (in the xorg.conf.d device file). According to the X log, X is definitely using 'intel' driver, not fb etc.
I am running Opensuse 11.4 on a file server, based on an Intel Atom motherboard with 945G graphics chipset.I recently shut down and then rebooted the server (because I needed to switch off the power for a few minutes) after it had had been running quite happily for several weeks since the last boot. Now I cannot start X - it gives up after the line(EE) intel(0): failed to set mode: Invalid argumentI've tried googling but am none the wiser what could have caused this, or how to fix it. Excerpts from the X log file:
Code:
[ 229.187]
X.Org X Server 1.9.3
[code].....
From where i can download manager accelerator for fedora.
View 3 Replies View RelatedAs this seems not yet to be covered in openSUSE Graphic Card Practical Theory Guide for Users I am asking here.
The Motherboard is an Asus P7H55-M Pro with Intel Core i3 530@2.93GHz. openSUSE 11.3 assigns the i915 driver by default:
Code:
# lspci -vk
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 12) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device 8383
Flags: bus master, fast devsel, latency 0, IRQ 30
code....
I am running Ubuntu 10.10 on my old Acer Travelmate 661 LCi. Device manager tells me: info.linux.driver i915. Is there a better driver, and if yes, where can I get it and how can I install it.
View 1 Replies View RelatedExcuse me for bringing back this kind of subject already discussed by other users, but I need it. I have slow internet connection so I need a download manager that is able to accelerate downloads and resume them after they are paused or interrupted by provider disconnection. I tried kget but it's very slow. After some minutes downloads hadn't even started. I found that downthemall and prozgui got a more suitable speed but I have had problems with latter versions of both.
In downthemall almost at all downloads that amount to a size of several Mb's the speed start to slow down when it reaches from 90% to 99% completed until 0kb/s and download pauses, needing manual resuming. But I can stay watching downloads to see when they'll stop, mainly if they are large. Prozgui worked fine in my opensuse 11.3 install but now on 11.4 some downloads seem to end up correctly but when I use them some files are corrupted.
I need a Download Accelerator that will allow me to download files from Fileshare with my premium account and will also allow me to add more that one link at once. Chrome integration would be nice as well.
View 2 Replies View RelatedI have used wget to try to download a big file. After several hours I realized that it would have been better to use a download accelerator. I would not like to discard the significant portion that wget has already downloaded. Do you know of any download accelerator that can resume this partial download?
View 2 Replies View RelatedI have just installed Ubuntu (9.10) and noted that in order to successfully run the trial off the CD I had to test in "safe graphics" mode. I have an NVIDIA GEforce 6600 GT card - which was discovered by Ubuntu in the first few minutes of the trial and so I activated the recommended driver and continued to test. After a successful trial I installed Ubuntu (dual partition Ubuntu / Windows XP), however, it seems the install didn't activate the required driver (as part of the process) and so I'm unable to get into my newly-installed Ubuntu at all. All I get is a flashing tty screen asking for my username and password - however it's erratic and won't recognise what I type. So - I'm stuck in a catch-22 as there doesn't seems to be a safe graphics mode option via the start (GRUB?) menu list.
View 4 Replies View RelatedI am wondering, what is the status of Intel GMA X4500 driver on Fedora 10.
View 2 Replies View RelatedI have just upgraded and now X won't start and remove xorg.conf etc doesn't fix it...
This is a nettop with standard Intel graphics - no NVidia chipset (inc Ion).
This machine has been upgraded through various versions so I suspect there may be an old file somewhere which is causing this.
This is what is shown in the log:
[ 1211.411]
X.Org X Server 1.9.0
Release Date: 2010-08-20
[ 1211.411] X Protocol Version 11, Revision 0
[ 1211.411] Build Operating System: Linux 2.6.24-27-server i686 Ubuntu
[Code]....
I am trying to install Ubuntu 10.10 on an Lenovo G560 laptop with Intel P6100. Everything seems to work fine except for the graphics. The screen goes blank when I enter startx from the console.
lspci shows the following for the graphics card : 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) In xorg.conf, I've tried drivers 'vesa' which gave me low resolution, and also 'intel' which blanked the screen again. How do I configure this graphics card ? Has anyone else faced similar issues when installing Ubuntu on this graphics card?
! I'm thinking of buying a corei5-660 on a motherboard with an Intel H55 Express Chipset. Does anyone know if it's fully compatible with OpenSUSE 11.3? I mean video (that comes from the processor, not an off-board PCI), audio (HD Audio), networking (Intel� 82578DC Gigabit), SATA Controller, USB, etc. I've tried to google but didn't find much info so I wonder if anyone is using or knows where I can find more info about it...
I have found this thread on the forums about the H55 chipset: Core i3 Intel Clarkdale graphic controller problem But the problems were facing on 11.2, I don't know about 11.3...
I've installed Suse linux 11.3 (kernel 2.6.34.7-0.5) on my brand new computer HP all in one 5130. Everything worked incredibly well : Wifi, wireless keyboard and mouse, sound, webcam.. There is only one remaining issue : I get a very poor resolution (1280x1024) instead of the 1920x1080 allowed by the screen. The graphic card is an intel chipset (HD graphics) integrated to an intel core i3 CPU. Here is (part of) the X11.org log :
Code:
X.org X Server 1.8.0
Release Date: 2010-04-02
[ 15.124] X Protocol Version 11, Revision 0
[ 15.124] Build Operating System: openSUSE SUSE LINUX
[ 15.124] Current Operating System: Linux linux-7xhd 2.6.34.7-0.5-desktop #1 SMP PREEMPT 2010-10-25 08:40:12 +0200 x86_64
[Code]....
I have been trying to enable compiz on my fedora 14, but when i enable the desktop effects the graphics just crashes and fedora freezes. When i type lspci -nnk | grep VGA for the graphics card i get:
I made alot of research on how to get Intel graphics work on Fedora, but couldnt find any solution
Same problem I had with Fedora Core 12 and 13.
I have an HP pavilion laptop with core i5 4210U that has intel HD4400 graphics. I installed debian wheezy 7.7 after shrinking win 8 and freeing 350GB for debian. I went through the hurdle of making a UEFI bootable USB drive and the system dual boots fine. But once I boot debian, I get all the run time messages and then login prompt flashes and the whole screen is blank except for a prompt on top left. I can open a terminal but that's about it. I'm unable to remotely login (connection refused) from either windows using moba terminal or another debian machine.
I searched the internet and found : [URL] ....
I tried the apt-get but it failed saying:
Code: Select allE: The value "wheezy-backports" is invalid for APT::Default-Release as such a release is not available in the sources
In case I have to install Debian testing version that some said worked, how do I get rid of my current installation, which is UEFI? Do I just erase its partitions in windows? Then what happens to its UEFI boot manager? Just leave it there to rot? If I install again with debian testing version, I envision some problems of the grub UEFI boot manager thinking that the debian 7.7 is still there and try to boot to it. I do have the partition images in partition manager home version 12 so I could just restore the UEFI partition.
HP Pavilion 15
Core i5 421-U
4GB DDR3L
750GB WD hard drive
15.4" 1366*786
[A word of explanation: initially the post below followed a post by Adam Williamson in another thread devoted to inability to load GNOME 3 in VM; this is why I address Adam in the opening.]
Adam, the situation with the GNOME 3 support for Intel integrated graphics seems to be a little confusing. You are probably among the most competent to clarify it.
Let me tell my own story first.
I was installing earlier today Fedora 15 on an HP dm4-1160US laptop with i5 and Intel graphics, and the anaconda installer hung right after "Waiting for hardware to initialize..." flashed on the screen, before even Media Check screen was reached. I tried a few times, always with the sae result: anaconda hung. Then I decided to add nomodeset to the boot parameters and the anaconda installer went on and I was able to complete the installation without a slightest problem.
I rebooted and without a problem reached the GDM login screen. When logging into GNOME, a pop-up window informed me that the system was unable to load GNOME and that instead I would be logged into the fall back mode. By the way, I haven't experienced the problems that plagued "Classic GNOME" on another laptop of mine where instead of clean install I preupgraded from Fedora 14 (strictly following the guidelines for preupgrading).
Wireless card was recognized and wlan initialized, nearby wireless networks seen, yet I wasn't able to connect to my own wireless network (I tried to do this already in the process of installation, equally unsuccessfully).
I was able to connect via Ethernet cable, and then I proceeded to perform yum update.
The update brought a new kernel. I went into grub.conf and noticed that nomodeset has been automatically added to the boot parameters for each of the two kernels. I decided to perform an experiment: I removed nomodeset from the boot options for the new kernel, and left it in place for the anaconda installed kernel.
I rebooted into the new kernel. Right after the grub menu disappeared, the screen turned pitch black and stayed this way for good 10 seconds. I thought that the former situation repeats itself making impossible to boot without the nomodeset option. Suddenly, the screen lit up and the GDM login screen appeared.
I logged into a shiny GNOME 3 where I am writing these words right now. Ah, and I was also able to connect to the wireless (I made yet another attempt using the network manager applet -- this time it worked).
What does that seem to indicate? That GNOME 3 support is already available for Intel graphics chips? But one may need to play with the nomodeset cheatcode, as I described this above?
i've been trying to load F15 on a HP DV4 (switchable ati/intel graphics, no hardware switch). the system boots from dvd fine, but gets stuck right after the starting anaconda message with a non blinking cursor on black screen and nothing happens after that.
View 2 Replies View RelatedI have just reinstalled testing on a Samsung Q30 and I cant get X to start. I am just left with a blank screen and ctrl+alt+Fn does nothing. I had a previous install of testing that worked fine but it might have been running a previous version of the kernel, or I had installed a bug fix to do with 915resoultion that I can't remember about. Booting off a Slax live cd works fine but I have had similar problems with Knoppix and Ubuntu.
I am running LXDE but I previously tried Gnome and had the same problem. Running xander displays cant open display Running dpkg-reconfigure xserver-xorg returns nothing, as does Xfree86 -configure There is no /etc/X11/xorg.conf or installed by default, I have tried running startx with a custom xorg.conf and the automatically generated one from -configure. The automatic one did not include any resolutions and was configured for a dual head set up although there was only one monitor connected.
I thought it may be the same problem as this:[url]
But I have tried following the bug fixes on that site and I have had no luck.
lspci
Xorg.0.log
How to enable Desktop Effects with Intel on board Graphics Card on Fedora 10?
View 1 Replies View RelatedI have a Dell Inspiron 1420 laptop running on Windows 7, I just download the iso file for Fedora 14 desktop edition, the live media download, and burned it to a new CD-RW, I can't seem to locate the file I need to boot it.
View 11 Replies View RelatedI installed Ubuntu 11.04, and everything was fine before I installed the graphics drivers for my ATI Radeon HD 6850 card. After that, doing things like moving windows, dragging on the desktop, etc. are really laggy.
View 1 Replies View RelatedI cannot install FC11 or FC10 on my Dell XPS One/A2420 machine. Every time I tried to install the Linux operating system, the screen goes black and the computer goes no response. It seems to have something to do with the video card--Intel GMA X4500HD Graphics.
View 1 Replies View Related