Debian Installation :: Intel HD4400 Graphics Failure To Start GUI
Nov 30, 2014
I have an HP pavilion laptop with core i5 4210U that has intel HD4400 graphics. I installed debian wheezy 7.7 after shrinking win 8 and freeing 350GB for debian. I went through the hurdle of making a UEFI bootable USB drive and the system dual boots fine. But once I boot debian, I get all the run time messages and then login prompt flashes and the whole screen is blank except for a prompt on top left. I can open a terminal but that's about it. I'm unable to remotely login (connection refused) from either windows using moba terminal or another debian machine.
I searched the internet and found : [URL] ....
I tried the apt-get but it failed saying:
Code: Select allE: The value "wheezy-backports" is invalid for APT::Default-Release as such a release is not available in the sources
In case I have to install Debian testing version that some said worked, how do I get rid of my current installation, which is UEFI? Do I just erase its partitions in windows? Then what happens to its UEFI boot manager? Just leave it there to rot? If I install again with debian testing version, I envision some problems of the grub UEFI boot manager thinking that the debian 7.7 is still there and try to boot to it. I do have the partition images in partition manager home version 12 so I could just restore the UEFI partition.
HP Pavilion 15
Core i5 421-U
4GB DDR3L
750GB WD hard drive
15.4" 1366*786
View 14 Replies
ADVERTISEMENT
Sep 15, 2014
I'm trying to make things work on my laptop. Almost done, but there is one hardware issue left. I have a Intel HD4400 graphic card. But it seems that it is not recognized. I had an issue loading Gnome3.
Code: Select allGNOME 3 Failed to Load
Unfortunately GNOME 3 failed to start properly and started in the fallback mode.
This most likely means your system (graphics hardware or driver) is not capable of delivering the full GNOME 3 experience
Another thing :
Code: Select all$ grep EE /var/log/Xorg.0.log
[ 29.117] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
Also, if I go in "applications" ->"system tools" -> "Preferences" -> "System settings" and then in "Details, under Graphics I have "Drivers : unknown", "Experience : Fallback".
And as a consequence, I can't use dual-screen. If I plug another sreen, I have an exact copy, not even with a good resolution.
I search on the web for solutions, but I didn't understand much. I don't know what Xorg is, x-window, etc...
View 3 Replies
View Related
Oct 12, 2010
I have just upgraded and now X won't start and remove xorg.conf etc doesn't fix it...
This is a nettop with standard Intel graphics - no NVidia chipset (inc Ion).
This machine has been upgraded through various versions so I suspect there may be an old file somewhere which is causing this.
This is what is shown in the log:
[ 1211.411]
X.Org X Server 1.9.0
Release Date: 2010-08-20
[ 1211.411] X Protocol Version 11, Revision 0
[ 1211.411] Build Operating System: Linux 2.6.24-27-server i686 Ubuntu
[Code]....
View 9 Replies
View Related
Sep 13, 2010
I have just reinstalled testing on a Samsung Q30 and I cant get X to start. I am just left with a blank screen and ctrl+alt+Fn does nothing. I had a previous install of testing that worked fine but it might have been running a previous version of the kernel, or I had installed a bug fix to do with 915resoultion that I can't remember about. Booting off a Slax live cd works fine but I have had similar problems with Knoppix and Ubuntu.
I am running LXDE but I previously tried Gnome and had the same problem. Running xander displays cant open display Running dpkg-reconfigure xserver-xorg returns nothing, as does Xfree86 -configure There is no /etc/X11/xorg.conf or installed by default, I have tried running startx with a custom xorg.conf and the automatically generated one from -configure. The automatic one did not include any resolutions and was configured for a dual head set up although there was only one monitor connected.
I thought it may be the same problem as this:[url]
But I have tried following the bug fixes on that site and I have had no luck.
lspci
Xorg.0.log
View 1 Replies
View Related
Jan 26, 2010
I have just installed Ubuntu (9.10) and noted that in order to successfully run the trial off the CD I had to test in "safe graphics" mode. I have an NVIDIA GEforce 6600 GT card - which was discovered by Ubuntu in the first few minutes of the trial and so I activated the recommended driver and continued to test. After a successful trial I installed Ubuntu (dual partition Ubuntu / Windows XP), however, it seems the install didn't activate the required driver (as part of the process) and so I'm unable to get into my newly-installed Ubuntu at all. All I get is a flashing tty screen asking for my username and password - however it's erratic and won't recognise what I type. So - I'm stuck in a catch-22 as there doesn't seems to be a safe graphics mode option via the start (GRUB?) menu list.
View 4 Replies
View Related
Jun 28, 2015
I just installed Debian 8.1 with Mate desktop environment. I have a laptop with Intel® HD Graphics 5500.When I try to play a game like Left 4 Dead 2 or Torchlight 2 I get extremely low FPS.I also have Ubuntu 14.04 Mate on another partition. The games run fine there.I don't understand why this big difference. Maybe I have to install or configure something..
View 4 Replies
View Related
Aug 31, 2015
I have Intel HD Graphics video card on my laptop using OpenGL 3.0 with Mesa 10.3.2, but I need OpenGL 3.3.
Can I upgrade/enable OpenGL >=3.3 on Mesa for my GPU for Debian 8.1 Jessie? How can I do that?
Output of glxinfo | grep OpenGL:
OpenGL vendor string: Intel Open Source Technology Center
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Mobile
OpenGL core profile version string: 3.3 (Core Profile) Mesa 10.3.2
OpenGL core profile shading language version string: 3.30
OpenGL core profile context flags: (none)
[Code] .....
View 2 Replies
View Related
Oct 5, 2014
I've recently put a new machine together:
Gigabyte GA-B85N Motherboard with Intel HD4600 Graphics / Intel Core i5 4440 CPU
OS: Debian GNU/Linux 7 (wheezy) / Linux msc001 3.2.0-4-amd64 #1 SMP Debian 3.2.60-1+deb7u3 x86_64 GNU/Linux
I've installed KDE and when I go standby everything seems ok, but when I resume the monitor does not respond (the power indicator is flashing so there is no signal being presented thru the HDMI cable). Note that the system is still running as I can Alt-F2 (quick task/find), select Terminal and enter sudo-reboot without the screen. So it is just the hdmi signal that is not being recreated/refreshed properly.
I've included the suspend log (/var/log/pm-suspend.log):
Code: Select allInitial commandline parameters:
Sat Oct 4 13:22:54 BST 2014: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend:
/usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
[Code] .....
View 10 Replies
View Related
Apr 16, 2011
I have an Acer Aspire TimelineX 4820TG. I'm running Wheezy and I can't seem to get switcheroo working correctly. I was running Squeeze, then upgraded to Wheezy because it had a kernel over 2.6.33 with switcheroo built in. Below is the layout of my build...
(~)$ uname -a
Linux skipjack-debian 2.6.38-2-686 #1 SMP Thu Apr 7 05:24:21 UTC 2011 i686 GNU/Linux
(~)$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
01:00.0 VGA compatible controller: ATI Technologies Inc Redwood [Radeon HD 5600 Series]
[code]....
View 5 Replies
View Related
Mar 1, 2010
I have a fairly new laptop, 2*1.8 Ghz, but when I try to run games more advanced than pac-man, it's about 1-0.5 frames / second. This doesn't seem right. I've goggled it, and found a few posts from 2008-2009, but nothing that actually helped. Does anyone have any idea, as to what might be wrong? If anyone has this card, I'd like to see what you have in your /etc/X11/xorg.conf file...
@art:~$ lspci -nn | grep VGA
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 03)
View 14 Replies
View Related
Aug 18, 2010
! I'm thinking of buying a corei5-660 on a motherboard with an Intel H55 Express Chipset. Does anyone know if it's fully compatible with OpenSUSE 11.3? I mean video (that comes from the processor, not an off-board PCI), audio (HD Audio), networking (Intel� 82578DC Gigabit), SATA Controller, USB, etc. I've tried to google but didn't find much info so I wonder if anyone is using or knows where I can find more info about it...
I have found this thread on the forums about the H55 chipset: Core i3 Intel Clarkdale graphic controller problem But the problems were facing on 11.2, I don't know about 11.3...
View 8 Replies
View Related
Jan 2, 2011
I've installed Suse linux 11.3 (kernel 2.6.34.7-0.5) on my brand new computer HP all in one 5130. Everything worked incredibly well : Wifi, wireless keyboard and mouse, sound, webcam.. There is only one remaining issue : I get a very poor resolution (1280x1024) instead of the 1920x1080 allowed by the screen. The graphic card is an intel chipset (HD graphics) integrated to an intel core i3 CPU. Here is (part of) the X11.org log :
Code:
X.org X Server 1.8.0
Release Date: 2010-04-02
[ 15.124] X Protocol Version 11, Revision 0
[ 15.124] Build Operating System: openSUSE SUSE LINUX
[ 15.124] Current Operating System: Linux linux-7xhd 2.6.34.7-0.5-desktop #1 SMP PREEMPT 2010-10-25 08:40:12 +0200 x86_64
[Code]....
View 9 Replies
View Related
Jan 27, 2011
I have been trying to enable compiz on my fedora 14, but when i enable the desktop effects the graphics just crashes and fedora freezes. When i type lspci -nnk | grep VGA for the graphics card i get:
I made alot of research on how to get Intel graphics work on Fedora, but couldnt find any solution
Same problem I had with Fedora Core 12 and 13.
View 5 Replies
View Related
Oct 19, 2010
I am trying to install Ubuntu 10.10 on an Lenovo G560 laptop with Intel P6100. Everything seems to work fine except for the graphics. The screen goes blank when I enter startx from the console.
lspci shows the following for the graphics card : 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) In xorg.conf, I've tried drivers 'vesa' which gave me low resolution, and also 'intel' which blanked the screen again. How do I configure this graphics card ? Has anyone else faced similar issues when installing Ubuntu on this graphics card?
View 2 Replies
View Related
May 27, 2011
[A word of explanation: initially the post below followed a post by Adam Williamson in another thread devoted to inability to load GNOME 3 in VM; this is why I address Adam in the opening.]
Adam, the situation with the GNOME 3 support for Intel integrated graphics seems to be a little confusing. You are probably among the most competent to clarify it.
Let me tell my own story first.
I was installing earlier today Fedora 15 on an HP dm4-1160US laptop with i5 and Intel graphics, and the anaconda installer hung right after "Waiting for hardware to initialize..." flashed on the screen, before even Media Check screen was reached. I tried a few times, always with the sae result: anaconda hung. Then I decided to add nomodeset to the boot parameters and the anaconda installer went on and I was able to complete the installation without a slightest problem.
I rebooted and without a problem reached the GDM login screen. When logging into GNOME, a pop-up window informed me that the system was unable to load GNOME and that instead I would be logged into the fall back mode. By the way, I haven't experienced the problems that plagued "Classic GNOME" on another laptop of mine where instead of clean install I preupgraded from Fedora 14 (strictly following the guidelines for preupgrading).
Wireless card was recognized and wlan initialized, nearby wireless networks seen, yet I wasn't able to connect to my own wireless network (I tried to do this already in the process of installation, equally unsuccessfully).
I was able to connect via Ethernet cable, and then I proceeded to perform yum update.
The update brought a new kernel. I went into grub.conf and noticed that nomodeset has been automatically added to the boot parameters for each of the two kernels. I decided to perform an experiment: I removed nomodeset from the boot options for the new kernel, and left it in place for the anaconda installed kernel.
I rebooted into the new kernel. Right after the grub menu disappeared, the screen turned pitch black and stayed this way for good 10 seconds. I thought that the former situation repeats itself making impossible to boot without the nomodeset option. Suddenly, the screen lit up and the GDM login screen appeared.
I logged into a shiny GNOME 3 where I am writing these words right now. Ah, and I was also able to connect to the wireless (I made yet another attempt using the network manager applet -- this time it worked).
What does that seem to indicate? That GNOME 3 support is already available for Intel graphics chips? But one may need to play with the nomodeset cheatcode, as I described this above?
View 8 Replies
View Related
Jul 27, 2011
i've been trying to load F15 on a HP DV4 (switchable ati/intel graphics, no hardware switch). the system boots from dvd fine, but gets stuck right after the starting anaconda message with a non blinking cursor on black screen and nothing happens after that.
View 2 Replies
View Related
Jan 16, 2009
How to enable Desktop Effects with Intel on board Graphics Card on Fedora 10?
View 1 Replies
View Related
Jan 2, 2010
My computer is Compaq Presario CQ61-110ED notebook pc Mijn videocard is:Intel Graphics Media Accelerator 4500MHD Where can I download a driver for Intel Graphics Media Accelerator 4500MHD by the Ubuntu 32/64 bits, version 9.10?
View 3 Replies
View Related
Jul 20, 2009
I cannot install FC11 or FC10 on my Dell XPS One/A2420 machine. Every time I tried to install the Linux operating system, the screen goes black and the computer goes no response. It seems to have something to do with the video card--Intel GMA X4500HD Graphics.
View 1 Replies
View Related
Jun 25, 2009
I'm running a P4 system with Dual ATI Radeon 2900HD Graphics cards. When I try to install F11, the graphical interface fails to start and I end up in a text install. I've seen plenty of information on how to fix the problem post install, however I'm not nearly advanced enough to then continue the installation (the text install does not install much, particularly doesn't install the graphical interface). Is there a way to work around this (IE a more complete text install, or somehow getting it to install in graphical user interface?)
View 2 Replies
View Related
Jun 17, 2010
I am trying to install ubuntu 10.04 to my raid 1+0 array. Install just sees four different hd:s
main-0
main-1
storage-0
storage-1
There is not showing any size or anything. I have set two raid arrays: main and storage, both with 4-hard-driver (raid10). Storage array is partitioned to 1TB and 400GB partitions, 400GB partition is where i want to install ubuntu. Main array has windows already. Where to go next?
root@ubuntu:~/src# dmraid -ay
RAID set "isw_beieefiehj_main" already active
RAID set "isw_beieefiehj_storage" already active
RAID set "isw_beieefiehj_main1" already active
RAID set "isw_beieefiehj_storage1" already active
root@ubuntu:~/src# parted_devices .....
View 2 Replies
View Related
Jul 30, 2010
before i installed ubuntu My pc had had an installed nvidia geforce 6200 256MB graphics plus an onboard intel graohics. it was for times that i wanted to install ubuntu on my pc, but it failed. so i tried to remove the nvidia and install ubuntu with the onboard graphics, and it was successful , i managed to install ubuntu 10.04 amd64 on my pc. now i want to reinstall the nvidia card but i can't. when i put it on my pc and turn it on and chose ubuntu from grub it fails to load ubuntu.so i tried to first install "NVIDIA-Linux-x86_64-180.60-pkg2.run" and then assemble the nvidia card on my pc. but "NVIDIA-Linux-x86_64-180.60-pkg2.run" fails to install.the nvidia-installer.log file is attached to this post.
View 3 Replies
View Related
Nov 23, 2010
Recently (the past two days), I have been experiencing graphical glitches. Seemingly random pixels (often in a horizontal line or rectangular group) would flash incorrect colors (like stuck pixels, except their color can change and they appear and disappear).
By removing my NVidia 8500 GT (falling back to the integrated 6150LE), I have removed the symptoms (except that now CAELinux doesn't display anything... but everything else works).
I suspect that it is the graphics card (I'm aware that the cards have known overheating issues), but I want to eliminate any other options before buying another. Could these symptoms be the result of a motherboard failure?
EDIT: I forgot to mention that it also locks up frequently with the card in (the graphics will freeze, but the caps lock light doesn't flash like it would in a kernel panic).
View 12 Replies
View Related
Aug 18, 2010
i previously posted a thread http:[URL].. that was regarding gaming issue, but now i got a bigger issue. i installed Intel 2010Q2 graphics package from [URL].. i first upgraded xorg-x11-server and related packages and installed devel package using yum.. later i compiled and installed kernel 2.6.34 and other packages included on [URL].. i rebooted the system and it showed display driver unknown so, i used system-config-display --reconfig and it detects my mobile 4 intel chipset. and when i reboot, GUI won't load .. when services finish loading screen goes blank and harddisk light blinks at constant intervals and i can't switch from GUI to CUI either using CTRL + ALT + F2 etc [URL].. PS i am able to login into single user and change xorg.conf
View 6 Replies
View Related
Dec 13, 2010
Purchased a slightly used T61 Thinkpad via a client of ours at work last week. I've been really happy with it so far, dumped 4GB RAM in it and have Vmware workstation running on it and all is well except the graphics drivers.
According to LSPCI the machine contains the device listed below.
Code:
X displays just fine and compiz works out of the box, but I'm only getting around 59 FPS with GLXgears. I do like to play the occasional game and what not, so i'm really hoping to get this increased. I've heard of running Tremulous on this card, so I imagine it can do it.
Is this low for this card?
View 2 Replies
View Related
Jul 29, 2011
Do Intel HD 3000 Graphics run out of the box on Linux? Or do I have to do some manual work to get it working? Does Intel develop open source drivers?
Are they faster than on Windows?
This would apply for any Linux distribution.
View 1 Replies
View Related
Sep 17, 2010
I tried to install the ATI proprietary driver for an HD 5800 (Catalyst for Linux 64 bit, v. 10.8). The two main instruction sites are:
SDB:Configuring graphics cards - openSUSE
SDB:ATI drivers - openSUSE
I chose the hard way method. I downloaded the driver. Restarted SuSE 11.3 in mode 3. And as SU followed the method above, including adding the zypper programmes (which found some already installed and which installed a whole lot more). When I then attempted to run the install (sh ./atidriver-install-10.8-x86.x86_64.run) and selected automatic mode. It completed 82% and stalled attempting to install "Postprocessing Kernel Module".
I pressed control c to kill the process and attempted to re-install using the manual mode and then using the build mode. In both instances, same outcome. When I rebooted, and entered my password, the desktop did not load but sent me back to the username/password page. I can't get back in. Does not matter as I have backed up my docs.
I decided to install the proprietary driver because the colours on the desktop corrupt after the 2nd boot following a clean install. i.e. on the initial boot the colours are fine. Second, this is the 3rd effort I have made to install the driver after a clean install of SuSE 11.3 and there is no change in outcome. So, my question: anyone any suggestion what is going on and how I can install the driver successfully? Or, do I not understand the new regime in SuSE 11.3 and should I not attempt to install a new driver.
View 9 Replies
View Related
Sep 21, 2009
I have Fedora 11. After my most recent update, I can't log in. Every time I authenticate, the logon window disappears, the screen goes black briefly, and then I am back at the log in window I entirely reinstalled, and then it worked, until I updated to the newest kernel then it didn't work anymore. Update: I now generated a xorg.conf with system-config-display --noui I manually removed and reinstalled xorg-x11-drv-intel with yum. It didn't work. By the way: now the start hangs on "Starting atd: OK" If I specify "vesa" in xorg.conf, then it gets past the point, but display doesn't load properly.
View 14 Replies
View Related
Jun 4, 2010
When I was 12 fedora with graphics acceleration worked well and without problems but now I installed fedora 13 dvd compatible with everything when I installed it and no problem only in go to System> Preferences> Desktop Effects I came with a message.
Code:
3D graphics acceleration not available. Desktop effects require hardware support for 3D. I was surprised what I came out.
And try to end with the console
Code:
But most disappointing is that I do not use Nvidia, ATi, Intel only: / will get more info put this command and I miss it.
Code:
View 1 Replies
View Related
Sep 1, 2011
i am using fedora 14. i need graphics driver for Intel 82579v . while moving folders it shows poor graphics.Login screen open as step by step. while playing videos ,it hang.my system is very slow now with high configuration. My system hang while improve graphics option in System-> Preference->Desktop Effects and select compiz and
View 1 Replies
View Related
