I just installed Debian 8.1 with Mate desktop environment. I have a laptop with Intel® HD Graphics 5500.When I try to play a game like Left 4 Dead 2 or Torchlight 2 I get extremely low FPS.I also have Ubuntu 14.04 Mate on another partition. The games run fine there.I don't understand why this big difference. Maybe I have to install or configure something..
View 4 RepliesI have Intel HD Graphics video card on my laptop using OpenGL 3.0 with Mesa 10.3.2, but I need OpenGL 3.3.
Can I upgrade/enable OpenGL >=3.3 on Mesa for my GPU for Debian 8.1 Jessie? How can I do that?
Output of glxinfo | grep OpenGL:
OpenGL vendor string: Intel Open Source Technology Center
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Mobile
OpenGL core profile version string: 3.3 (Core Profile) Mesa 10.3.2
OpenGL core profile shading language version string: 3.30
OpenGL core profile context flags: (none)
[Code] .....
I have an HP pavilion laptop with core i5 4210U that has intel HD4400 graphics. I installed debian wheezy 7.7 after shrinking win 8 and freeing 350GB for debian. I went through the hurdle of making a UEFI bootable USB drive and the system dual boots fine. But once I boot debian, I get all the run time messages and then login prompt flashes and the whole screen is blank except for a prompt on top left. I can open a terminal but that's about it. I'm unable to remotely login (connection refused) from either windows using moba terminal or another debian machine.
I searched the internet and found : [URL] ....
I tried the apt-get but it failed saying:
Code: Select allE: The value "wheezy-backports" is invalid for APT::Default-Release as such a release is not available in the sources
In case I have to install Debian testing version that some said worked, how do I get rid of my current installation, which is UEFI? Do I just erase its partitions in windows? Then what happens to its UEFI boot manager? Just leave it there to rot? If I install again with debian testing version, I envision some problems of the grub UEFI boot manager thinking that the debian 7.7 is still there and try to boot to it. I do have the partition images in partition manager home version 12 so I could just restore the UEFI partition.
HP Pavilion 15
Core i5 421-U
4GB DDR3L
750GB WD hard drive
15.4" 1366*786
I have an Acer Aspire TimelineX 4820TG. I'm running Wheezy and I can't seem to get switcheroo working correctly. I was running Squeeze, then upgraded to Wheezy because it had a kernel over 2.6.33 with switcheroo built in. Below is the layout of my build...
(~)$ uname -a
Linux skipjack-debian 2.6.38-2-686 #1 SMP Thu Apr 7 05:24:21 UTC 2011 i686 GNU/Linux
(~)$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
01:00.0 VGA compatible controller: ATI Technologies Inc Redwood [Radeon HD 5600 Series]
[code]....
I have a fairly new laptop, 2*1.8 Ghz, but when I try to run games more advanced than pac-man, it's about 1-0.5 frames / second. This doesn't seem right. I've goggled it, and found a few posts from 2008-2009, but nothing that actually helped. Does anyone have any idea, as to what might be wrong? If anyone has this card, I'd like to see what you have in your /etc/X11/xorg.conf file...
@art:~$ lspci -nn | grep VGA
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 03)
! I'm thinking of buying a corei5-660 on a motherboard with an Intel H55 Express Chipset. Does anyone know if it's fully compatible with OpenSUSE 11.3? I mean video (that comes from the processor, not an off-board PCI), audio (HD Audio), networking (Intel� 82578DC Gigabit), SATA Controller, USB, etc. I've tried to google but didn't find much info so I wonder if anyone is using or knows where I can find more info about it...
I have found this thread on the forums about the H55 chipset: Core i3 Intel Clarkdale graphic controller problem But the problems were facing on 11.2, I don't know about 11.3...
I've installed Suse linux 11.3 (kernel 2.6.34.7-0.5) on my brand new computer HP all in one 5130. Everything worked incredibly well : Wifi, wireless keyboard and mouse, sound, webcam.. There is only one remaining issue : I get a very poor resolution (1280x1024) instead of the 1920x1080 allowed by the screen. The graphic card is an intel chipset (HD graphics) integrated to an intel core i3 CPU. Here is (part of) the X11.org log :
Code:
X.org X Server 1.8.0
Release Date: 2010-04-02
[ 15.124] X Protocol Version 11, Revision 0
[ 15.124] Build Operating System: openSUSE SUSE LINUX
[ 15.124] Current Operating System: Linux linux-7xhd 2.6.34.7-0.5-desktop #1 SMP PREEMPT 2010-10-25 08:40:12 +0200 x86_64
[Code]....
I have just reinstalled testing on a Samsung Q30 and I cant get X to start. I am just left with a blank screen and ctrl+alt+Fn does nothing. I had a previous install of testing that worked fine but it might have been running a previous version of the kernel, or I had installed a bug fix to do with 915resoultion that I can't remember about. Booting off a Slax live cd works fine but I have had similar problems with Knoppix and Ubuntu.
I am running LXDE but I previously tried Gnome and had the same problem. Running xander displays cant open display Running dpkg-reconfigure xserver-xorg returns nothing, as does Xfree86 -configure There is no /etc/X11/xorg.conf or installed by default, I have tried running startx with a custom xorg.conf and the automatically generated one from -configure. The automatic one did not include any resolutions and was configured for a dual head set up although there was only one monitor connected.
I thought it may be the same problem as this:[url]
But I have tried following the bug fixes on that site and I have had no luck.
lspci
Xorg.0.log
I have been trying to enable compiz on my fedora 14, but when i enable the desktop effects the graphics just crashes and fedora freezes. When i type lspci -nnk | grep VGA for the graphics card i get:
I made alot of research on how to get Intel graphics work on Fedora, but couldnt find any solution
Same problem I had with Fedora Core 12 and 13.
i previously posted a thread http:[URL].. that was regarding gaming issue, but now i got a bigger issue. i installed Intel 2010Q2 graphics package from [URL].. i first upgraded xorg-x11-server and related packages and installed devel package using yum.. later i compiled and installed kernel 2.6.34 and other packages included on [URL].. i rebooted the system and it showed display driver unknown so, i used system-config-display --reconfig and it detects my mobile 4 intel chipset. and when i reboot, GUI won't load .. when services finish loading screen goes blank and harddisk light blinks at constant intervals and i can't switch from GUI to CUI either using CTRL + ALT + F2 etc [URL].. PS i am able to login into single user and change xorg.conf
View 6 Replies View RelatedPurchased a slightly used T61 Thinkpad via a client of ours at work last week. I've been really happy with it so far, dumped 4GB RAM in it and have Vmware workstation running on it and all is well except the graphics drivers.
According to LSPCI the machine contains the device listed below.
Code:
X displays just fine and compiz works out of the box, but I'm only getting around 59 FPS with GLXgears. I do like to play the occasional game and what not, so i'm really hoping to get this increased. I've heard of running Tremulous on this card, so I imagine it can do it.
Is this low for this card?
Do Intel HD 3000 Graphics run out of the box on Linux? Or do I have to do some manual work to get it working? Does Intel develop open source drivers?
Are they faster than on Windows?
This would apply for any Linux distribution.
I have Fedora 11. After my most recent update, I can't log in. Every time I authenticate, the logon window disappears, the screen goes black briefly, and then I am back at the log in window I entirely reinstalled, and then it worked, until I updated to the newest kernel then it didn't work anymore. Update: I now generated a xorg.conf with system-config-display --noui I manually removed and reinstalled xorg-x11-drv-intel with yum. It didn't work. By the way: now the start hangs on "Starting atd: OK" If I specify "vesa" in xorg.conf, then it gets past the point, but display doesn't load properly.
View 14 Replies View RelatedWhen I was 12 fedora with graphics acceleration worked well and without problems but now I installed fedora 13 dvd compatible with everything when I installed it and no problem only in go to System> Preferences> Desktop Effects I came with a message.
Code:
3D graphics acceleration not available. Desktop effects require hardware support for 3D. I was surprised what I came out.
And try to end with the console
Code:
But most disappointing is that I do not use Nvidia, ATi, Intel only: / will get more info put this command and I miss it.
Code:
i am using fedora 14. i need graphics driver for Intel 82579v . while moving folders it shows poor graphics.Login screen open as step by step. while playing videos ,it hang.my system is very slow now with high configuration. My system hang while improve graphics option in System-> Preference->Desktop Effects and select compiz and
View 1 Replies View RelatedMy new motherboard has built in intel G41 graphics card. Problem is under ubuntu maximum resolution is something like 1300 x 1024, in windows the highets working is something like 1900 x 1200.How can I achieve the maximum resolution or near maximum on ubuntu 10.04, also note that I have the same issue on 9.10.I looked for the xorg.conf to try and manually set the resolution but the file does not exist in 10.04
View 2 Replies View RelatedHave a reasonably old HP D510 running onboard Intel 845G graphics, which has worked fine to date using Suse 10/11.x x86 and also have tried various Ubuntu breeds on it before, as well. Have just installed Kubuntu 10.04, and am having issues that irregularly, and apparently randomly, screen goes black and I get a message saying "Ubuntu is running in low-graphics mode".
I OK this and get a messages asking me what I would like to do:
1 Run in low graphic for this session
2 Reconfigure graphic
3 Troubleshoot
4 Exit to console
5 Restart x
Basically, none of these work. If I click 2, there are a number of choices which don't work, can only cancel. Basically the only fix is a reboot, and it will again work for a 'random period of time'. Have never had this issue previously, so it is obviously something that has been introduced with 10.04? Briefly installed Ubuntu 10.04 prior to Kubuntu, and think I had the same prob.
I know that you can have a nice control center if you have nvidia or ati drivers installed. Is there such a thing for intel graphics (Intel GMA or HD graphics)?
View 2 Replies View RelatedI need to use my TV as a monitor via DVI.
Using Meerkat 64. Here's some specs:
Code:
Because the Physical ID is 2.1, I'm fairly certain this is the DVI port. Do I need a driver for this to work?
I just installed Ubuntu 10.10 on my Dell Latitude D430 that I use at work. I have it on my desk docked going to a Dell LCD Monitor. When I go into the monitor set up it says Unknown for the monitor and Laptop for the actual laptop display. Also, I have very low resolutions for the "Unknown" monitor.
I am trying to resolved this issue so that I have better resolutions on the external monitor and then I can try to extend the desktop between 2 screens.
I found something online about adding the intel PPA and I did that, but now what. There is no xorg.conf that I can find for 10.10.
Installed Archlinux 32 and 64 bit (dual boot) with I946GZ onboard graphics 00:02.0 VGA compatible controller: Intel Corporation 82946GZ/GL Integrated Graphics Controller (rev 02) Both oses work ok in the vt's and do use native resolution of wide LCD (with KMS enabled) When i start kdm both oses display distorted background image (of kdm) in th LCD's native resolution, DONT display the actual login window, and mouse won't move In the 64 bit system if i Alt Ctl F1 (to a vt) the display remains frozen on the kdm background, but the computer is responsive (e.g type 'init 6' and the computer reboots after few seconds etc)
In the 32 bit system the computer does not respond at all and appears frozen completely If i disable KMS (add 'nomodeset' in grub) most stuff works fine except the display only supports 720x400 in the vt's and 1024x768 1280x1024 in the desktop, and does not support opengl (kde desktop effects work ok with xrender though)
what all graphics functionality does Intel's i915 graphics driver support?( blending,blitting ).By looking at the source code it appears to me that it support just 'fill rectangle' and 'image blitting'.Is that all?
View 1 Replies View RelatedDoes CentOS 5.4 support Intel Q45 graphics chip? If it does not support, How do I install the driver manually?
View 1 Replies View RelatedIs there away to update my driver. In my Xorg.conf all I have under driver is "Intel" I am using an Intel GM45 card and I don't have 3D support.
View 14 Replies View RelatedI have Fedora 11 and Intel Intel D410PT With Integrated Intel Atom Processor D410 and the Intel NM10 Express Chipset M-ITX Motherboard..Intel Graphics Media Accelerator 3150.How can I get Fedora 11 to install in graphics mode-would a PCI card and disable onboard stand a chance?
Do I have to "slipstream" the right driver in the install?Intel seem not to have a Linux driver-is there a generic one?
I have an intel core i3 laptop, it has 4gig of ram only showing 2 I am also running the x64 bit version of fedora 14.. My graphics will not work correctly. I have tried the intel driver for linux.. It did not work( or i did something wrong) very possible in messing up the install. I would llike to know if there is an update coming out or if i could get a step by step on how to fix, this issue..
View 2 Replies View RelatedI want to downgrade my Intel driver to version 2.11.0. I don't know what version I have at the moment but I have installed Fedora 15 (Lovelock). The reason is that Office 2007 has graphical bugs with Intel drivers that are newer than 2.11. So, will my gnome shell work fine after the downgrade and how to downgrade? I have searched a lot from google but didn't find any solutions.
View 3 Replies View RelatedMy system occasionally, not often, but enough to bring me to do something about it, keeps freezing. Hard lock-ups. This is a known bug for openSUSE 11.3 and intel video cards. So, I tried some suggestions and updated my kernel to 2.6.35. Nope. Same prob. I updated Xorg, mesa, drm, cairo (had to go to Factory for that one). I finally got all the requirements met as listed on Intel Linux Graphics: 2010Q2 and I download the intel 2d driver, since it's newer than what comes with openSUSE, even in Factory (xorg-x11-driver-video-intel-legacy 2.9.1).Now, when I go to compile the driver, it errors out on ./configure.how do I let this intel driver package know where xorg-server is?
View 3 Replies View RelatedI would like to know if I will be able to work on my laptop with 11.4 , someone knows if something changed with hang/freeze issues? Currently I have installed 11.1 but since repositories were removed no updates or new software for me so I'm considering installing something new.
View 7 Replies View RelatedI've been using Mandriva (and predecessors) for ten years or so, but that distro really seems to be dying at the moment. Consequently, I am trying to move over my various PCs to SUSE. I've started with my EEEPC 901 which has a 945GME integrated graphics chip. Using Mandriva 2010.2 it works fine and I can have desktop effects (built into KDE) running with no problems. However, with KDE on openSUSE 11.4 I get irregular freezes, although I can still work within the focussed window. Moving around though, clicking on other parts of the desktop etc. doesn't work, then after a few seconds they all happen at once. I am getting the following error multiple times in the X log, which I suspect is associated:
Code:
EQ overflowing. The server is probably stuck in an infinite
loop.
I note this supposedly fixed bug report that may be relevant:[URL].. Secondly, I am getting hopeless 3D speed (glxinfo reports SGI and has all expected output). Desktop effects won't work at all, on boot it pops up a message saying they are disabled as too slow. I know it isn't a benchmark, but glxgears gives about 50, it used to give over 500. I remember a few X versions back having to enable UXA mode instead of EXA in the 'intel' driver, but presumably that is no longer needed and I cannot see any effect of doing that now (in the xorg.conf.d device file). According to the X log, X is definitely using 'intel' driver, not fb etc.