Debian Installation :: X Server Crashes On New Install On Intel I855 Graphics Card
Sep 13, 2010
I have just reinstalled testing on a Samsung Q30 and I cant get X to start. I am just left with a blank screen and ctrl+alt+Fn does nothing. I had a previous install of testing that worked fine but it might have been running a previous version of the kernel, or I had installed a bug fix to do with 915resoultion that I can't remember about. Booting off a Slax live cd works fine but I have had similar problems with Knoppix and Ubuntu.
I am running LXDE but I previously tried Gnome and had the same problem. Running xander displays cant open display Running dpkg-reconfigure xserver-xorg returns nothing, as does Xfree86 -configure There is no /etc/X11/xorg.conf or installed by default, I have tried running startx with a custom xorg.conf and the automatically generated one from -configure. The automatic one did not include any resolutions and was configured for a dual head set up although there was only one monitor connected.
I thought it may be the same problem as this:[url]
But I have tried following the bug fixes on that site and I have had no luck.
I would like to know if I will be able to work on my laptop with 11.4 , someone knows if something changed with hang/freeze issues? Currently I have installed 11.1 but since repositories were removed no updates or new software for me so I'm considering installing something new.
I have a Intel server board machine that has a on board Matrox cardWith 11.2 the install barfs to text mode configuring the card during install butonce you log in a root and run sax2 it is OK once the machine restartsWith 11.3 it installs ( apparently ) perfectly then just goes to a blackscreen .. the usb keyboard is dead and that is that
I have an HP pavilion laptop with core i5 4210U that has intel HD4400 graphics. I installed debian wheezy 7.7 after shrinking win 8 and freeing 350GB for debian. I went through the hurdle of making a UEFI bootable USB drive and the system dual boots fine. But once I boot debian, I get all the run time messages and then login prompt flashes and the whole screen is blank except for a prompt on top left. I can open a terminal but that's about it. I'm unable to remotely login (connection refused) from either windows using moba terminal or another debian machine.
I searched the internet and found : [URL] ....
I tried the apt-get but it failed saying:
Code: Select allE: The value "wheezy-backports" is invalid for APT::Default-Release as such a release is not available in the sources
In case I have to install Debian testing version that some said worked, how do I get rid of my current installation, which is UEFI? Do I just erase its partitions in windows? Then what happens to its UEFI boot manager? Just leave it there to rot? If I install again with debian testing version, I envision some problems of the grub UEFI boot manager thinking that the debian 7.7 is still there and try to boot to it. I do have the partition images in partition manager home version 12 so I could just restore the UEFI partition.
HP Pavilion 15 Core i5 421-U 4GB DDR3L 750GB WD hard drive 15.4" 1366*786
Just spent about 4 hours upgrading from 9.10 to 10.04 thinking it would fix my graphics problems. Basically I have no 3d acceleration of any kind, is there any way i can load the intel drivers? Because what I'm using now is really crappy.
Can i just change something in my xorg to intel and it will load that driver ? I've tried the "hardware drivers" thing but it does not show anything.
I'm a Fedora 12 user on an HP Pavilion dv4 laptop. I'm currently using kernel 22.214.171.124-99.fc12.x86_64, graphics driver xorg-x11-drv-intel-2.9.1-1.fc12.x86_64, and mesa 7.7-4. My graphics card is an Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07).
I've been having some problems getting my 3D acceleration to work. Although it worked correctly in Fedora 11, I have not been able to get it to work yet in Fedora 12.
The output of glxinfo shows:
Running glxinfo with LIBGL_DEBUG=verbose shows:
I found a similar message here: [url]
However, I'm not sure if this is the same problem I have. What does the drm_intel_bo_busy message mean?
I have a Dell Dimension 3000 with an integrated Intel 865g graphics card that I am trying to use in X on Centos 5.4 i386. The "810" driver (what Centos configures by default) works, but will not display at 1600x900. Strangely enough, it will actually work at higher resolutions such as 1600x1200, but 1600x900 fails, even with 915resolution and 855resolution. The "intel" xorg driver (included with Centos) locks up the entire machine when starting X, so thats a no go as well.
The "fbdev" driver works but, once again, won't display 1600x900, because that resolution doesn't work properly with the version of the intelfb kernel module that Centos bundles. Fedora Core 12 works perfectly fine at 1600x900 on the machine. I think that if I could get a newer xorg installation (or perhaps just a driver) going under Centos, it might fix the problem. I couldn't find any 3rd party repos containing such packages. I'd really rather run Centos on the machine, due to the package stability (yes, I see the irony here).
I cannot install FC11 or FC10 on my Dell XPS One/A2420 machine. Every time I tried to install the Linux operating system, the screen goes black and the computer goes no response. It seems to have something to do with the video card--Intel GMA X4500HD Graphics.
I am trying to dual boot here (Debian and Windows 7).I am trying to setup server here (trying my hands on first time.)I am getting the following error on the screen when i select to boot from Debian (windows boots up normally when selected in grub) I have attached the image,it states:-Radeon kernel modesetting for r600 or later requires firmware-linux-nonfree
I ran the wubi installer for kubuntu on my computer running a Windows 7 64 bit OS. When I boot my computer up I can go with either windows or kubuntu. I boot up kubuntu and an image of the kde logo appears. Then the computer shows a garbled mix of multi-colored pixels in no distinguishable pattern, yet the mouse is visible and still movable.
Installed Ubuntu 11.04 but i don't know how to install my nvidia 7200 gs graphics card. in the previous versions (ubuntu 9.10) it installed very easly.. But in Natty 11.04, while i am try to install my driver it fails 2 times and after installation (reboot) ubuntu freezes and not working So reinstalled ubuntu 11.04.
I've been meaning to get back into linux for a couple of years now.It seems I may have left it too long for my hardware.I'm struggling to freshly install lucid 10.04 onto a pc with an ATI 9200 graphics card.Can someone give a definitive answer on this - the internet is full of different solutions and I cannot get any to work.
I'm running hardware already considered legacy and I was made painfully aware that those drivers, for ATI cards, are only available from Jessie repositories; yet, somehow I was able to have my system configured to run not the stock drivers the system used for installation but, allegedly, proprietary drivers.
I did notice an overall improvement on how the system displays everything on the screen but after fumbling around the system trying to install a game I had a message warning that only software acceleration was activated and not full hardware acceleration, which was what I was aiming at.
After going through a lot of guides on the web I was able to:
a) discover the system is running MESA drivers (or so I have understood) b) install headers for my system but somehow along the way I fumbled whatever I was doing and I probably now have a lot of loose ends in the system
Being Debian (and rock solid) the system is still running smoothly but I really want to clean up after myself and correct what I can and improve where is possible.
I just installed Debian 8.1 with Mate desktop environment. I have a laptop with Intel® HD Graphics 5500.When I try to play a game like Left 4 Dead 2 or Torchlight 2 I get extremely low FPS.I also have Ubuntu 14.04 Mate on another partition. The games run fine there.I don't understand why this big difference. Maybe I have to install or configure something..
I just bought a new graphics card and installed it. it works perfectly although my sound worked perfectly this morning and I think the graphics card is overriding my built in sound card. I need help fixing the sound. The graphics card I bought is an ATI Radeon Cedar HD 5450 The sound I want to use is HDA VIA VT82xx when I run alsamixer I get Card:
This is a triple-monitor setup with two video cards, where the mouse pointer gets "stuck" if it tries to cross from one video card to the next one. It worked correctly in openSUSE 11.2 and doesn't work in openSUSE 11.3 with the same xorg.conf. This is a 64-bit openSUSE 11.3 with xorg 7.5-11.3 (the openSUSE prepackaged version). I've already tried NVidia drivers 256.53-16.1 (the openSUSE NVidia repository version) and 260.19.12 (the latest off of the NVidia website).
This is the same xorg.conf that I used successfully in openSUSE 11.2. I tried a new automatically generated xorg.conf using nvidia-settings and it had the same problem. This forum won't let me upload the relevant files, but here: [URL] is a tar-ball with my xorg.conf, Xorg.*.log, /var/log/messages, and the NVidia debugging output.
I've freshly installed Debian Lenny 5.03 with xfce from cd, but I'm having intermittent problems with X. Mostly X will startup fine, but occasionally it crashes. If I'm lucky, it will just shutdown and just return me to the text-mode login. But if I'm unlucky, it freezes completely, such that even the alt-SysRq key combos won't work.
I have an Acer Aspire TimelineX 4820TG. I'm running Wheezy and I can't seem to get switcheroo working correctly. I was running Squeeze, then upgraded to Wheezy because it had a kernel over 2.6.33 with switcheroo built in. Below is the layout of my build...
(~)$ uname -a Linux skipjack-debian 2.6.38-2-686 #1 SMP Thu Apr 7 05:24:21 UTC 2011 i686 GNU/Linux (~)$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 01:00.0 VGA compatible controller: ATI Technologies Inc Redwood [Radeon HD 5600 Series]
I am running Opensuse 11.4 on a file server, based on an Intel Atom motherboard with 945G graphics chipset.I recently shut down and then rebooted the server (because I needed to switch off the power for a few minutes) after it had had been running quite happily for several weeks since the last boot. Now I cannot start X - it gives up after the line(EE) intel(0): failed to set mode: Invalid argumentI've tried googling but am none the wiser what could have caused this, or how to fix it. Excerpts from the X log file: