I recently installed openSUSE on a new Toshiba and i'm getting very choppy video while watching videos on ....., justin.tv, etc. The video is fine as long as I don't full screen. However, when I try to fullscreen a stream on justin.tv or a ..... video, it instantly becomes choppy and video is extremely delayed in relation to the sound. The sound still continues at it's regular pace, however the video lags behind and is just choppy in general.Also, not sure if this helps, but i'm running an i3 2310M.
I wasn't sure weather to post here or on the minecraft forums.
OS: Ubuntu 11.04 x86 CPU: Intel core i5 sandy bridge 2410M GPU: Intel HD 3000 (Integrated) RAM: 8 gigs ddr3
So I got my new laptop a few days ago,loaded up ubuntu.After starting up minecraft to connect to my server I realised that the fps was going from 50 to 1 and back to 50 again EVERY SECOND so obviously this isn't normal.After a quick google search every one on windows seems to have no problem. There are no results for linux.
Edit: Yes I know why the are you using a x86 os on a computer with 8 gigs of ram? At the time of installation all I had was no internet access and a live cd from LUD with ubuntu on it
I am thinking about buying a new computer. It has ATI Radeon HD 3000 Graphics. Does Fedora 14 support ATI Radeon HD 3000 Graphicst? Will I have to install a driver and if so where would I download the driver?
I have an old Dell Dimension 3000 Desktop computer which used to run Windows XP but I installed Linux Ubuntu 10.04 32-bit onto it. It has a pentium 4 2.8Ghz, 1GB of ram(I think), a 120GB HDD...etc. Anyway, so when I install Ubuntu I try to install the graphics drivers for it. I go to intels website. There were two drivers available for Linux for my adapter:
the i915graphics and a intelgraphics driver. Both were tar.gz. When I try to install them, it can't for some reason. I tried "sudo sh" in terminal, I tried extracting the package and executing it...etc. Nothing works. It does give me a message in terminal though.
! I'm thinking of buying a corei5-660 on a motherboard with an Intel H55 Express Chipset. Does anyone know if it's fully compatible with OpenSUSE 11.3? I mean video (that comes from the processor, not an off-board PCI), audio (HD Audio), networking (Intel� 82578DC Gigabit), SATA Controller, USB, etc. I've tried to google but didn't find much info so I wonder if anyone is using or knows where I can find more info about it...
I have found this thread on the forums about the H55 chipset: Core i3 Intel Clarkdale graphic controller problem But the problems were facing on 11.2, I don't know about 11.3...
I've installed Suse linux 11.3 (kernel 22.214.171.124-0.5) on my brand new computer HP all in one 5130. Everything worked incredibly well : Wifi, wireless keyboard and mouse, sound, webcam.. There is only one remaining issue : I get a very poor resolution (1280x1024) instead of the 1920x1080 allowed by the screen. The graphic card is an intel chipset (HD graphics) integrated to an intel core i3 CPU. Here is (part of) the X11.org log :
Code: X.org X Server 1.8.0 Release Date: 2010-04-02 [ 15.124] X Protocol Version 11, Revision 0 [ 15.124] Build Operating System: openSUSE SUSE LINUX [ 15.124] Current Operating System: Linux linux-7xhd 126.96.36.199-0.5-desktop #1 SMP PREEMPT 2010-10-25 08:40:12 +0200 x86_64 [Code]....
need to upgrade my intel graphics drivers for Compiz Fusion (3d desktop effects) suse linux 11.1 kernel:- 188.8.131.52-9-pae my hardware configuration is as follows intel dg41rq motherboard 2gb kingston ram intel dual core cpu 2.5 ghz current graphics drivers:- 4 series chipset integrated graphics controllers
I just installed Debian 8.1 with Mate desktop environment. I have a laptop with Intel® HD Graphics 5500.When I try to play a game like Left 4 Dead 2 or Torchlight 2 I get extremely low FPS.I also have Ubuntu 14.04 Mate on another partition. The games run fine there.I don't understand why this big difference. Maybe I have to install or configure something..
i previously posted a thread http:[URL].. that was regarding gaming issue, but now i got a bigger issue. i installed Intel 2010Q2 graphics package from [URL].. i first upgraded xorg-x11-server and related packages and installed devel package using yum.. later i compiled and installed kernel 2.6.34 and other packages included on [URL].. i rebooted the system and it showed display driver unknown so, i used system-config-display --reconfig and it detects my mobile 4 intel chipset. and when i reboot, GUI won't load .. when services finish loading screen goes blank and harddisk light blinks at constant intervals and i can't switch from GUI to CUI either using CTRL + ALT + F2 etc [URL].. PS i am able to login into single user and change xorg.conf
Purchased a slightly used T61 Thinkpad via a client of ours at work last week. I've been really happy with it so far, dumped 4GB RAM in it and have Vmware workstation running on it and all is well except the graphics drivers.
According to LSPCI the machine contains the device listed below.
X displays just fine and compiz works out of the box, but I'm only getting around 59 FPS with GLXgears. I do like to play the occasional game and what not, so i'm really hoping to get this increased. I've heard of running Tremulous on this card, so I imagine it can do it.
I have Fedora 11. After my most recent update, I can't log in. Every time I authenticate, the logon window disappears, the screen goes black briefly, and then I am back at the log in window I entirely reinstalled, and then it worked, until I updated to the newest kernel then it didn't work anymore. Update: I now generated a xorg.conf with system-config-display --noui I manually removed and reinstalled xorg-x11-drv-intel with yum. It didn't work. By the way: now the start hangs on "Starting atd: OK" If I specify "vesa" in xorg.conf, then it gets past the point, but display doesn't load properly.
When I was 12 fedora with graphics acceleration worked well and without problems but now I installed fedora 13 dvd compatible with everything when I installed it and no problem only in go to System> Preferences> Desktop Effects I came with a message.
3D graphics acceleration not available. Desktop effects require hardware support for 3D. I was surprised what I came out.
And try to end with the console
But most disappointing is that I do not use Nvidia, ATi, Intel only: / will get more info put this command and I miss it.
i am using fedora 14. i need graphics driver for Intel 82579v . while moving folders it shows poor graphics.Login screen open as step by step. while playing videos ,it hang.my system is very slow now with high configuration. My system hang while improve graphics option in System-> Preference->Desktop Effects and select compiz and
My new motherboard has built in intel G41 graphics card. Problem is under ubuntu maximum resolution is something like 1300 x 1024, in windows the highets working is something like 1900 x 1200.How can I achieve the maximum resolution or near maximum on ubuntu 10.04, also note that I have the same issue on 9.10.I looked for the xorg.conf to try and manually set the resolution but the file does not exist in 10.04
Have a reasonably old HP D510 running onboard Intel 845G graphics, which has worked fine to date using Suse 10/11.x x86 and also have tried various Ubuntu breeds on it before, as well. Have just installed Kubuntu 10.04, and am having issues that irregularly, and apparently randomly, screen goes black and I get a message saying "Ubuntu is running in low-graphics mode".
I OK this and get a messages asking me what I would like to do: 1 Run in low graphic for this session 2 Reconfigure graphic 3 Troubleshoot 4 Exit to console 5 Restart x
Basically, none of these work. If I click 2, there are a number of choices which don't work, can only cancel. Basically the only fix is a reboot, and it will again work for a 'random period of time'. Have never had this issue previously, so it is obviously something that has been introduced with 10.04? Briefly installed Ubuntu 10.04 prior to Kubuntu, and think I had the same prob.
I just installed Ubuntu 10.10 on my Dell Latitude D430 that I use at work. I have it on my desk docked going to a Dell LCD Monitor. When I go into the monitor set up it says Unknown for the monitor and Laptop for the actual laptop display. Also, I have very low resolutions for the "Unknown" monitor.
I am trying to resolved this issue so that I have better resolutions on the external monitor and then I can try to extend the desktop between 2 screens.
I found something online about adding the intel PPA and I did that, but now what. There is no xorg.conf that I can find for 10.10.
Installed Archlinux 32 and 64 bit (dual boot) with I946GZ onboard graphics 00:02.0 VGA compatible controller: Intel Corporation 82946GZ/GL Integrated Graphics Controller (rev 02) Both oses work ok in the vt's and do use native resolution of wide LCD (with KMS enabled) When i start kdm both oses display distorted background image (of kdm) in th LCD's native resolution, DONT display the actual login window, and mouse won't move In the 64 bit system if i Alt Ctl F1 (to a vt) the display remains frozen on the kdm background, but the computer is responsive (e.g type 'init 6' and the computer reboots after few seconds etc)
In the 32 bit system the computer does not respond at all and appears frozen completely If i disable KMS (add 'nomodeset' in grub) most stuff works fine except the display only supports 720x400 in the vt's and 1024x768 1280x1024 in the desktop, and does not support opengl (kde desktop effects work ok with xrender though)
what all graphics functionality does Intel's i915 graphics driver support?( blending,blitting ).By looking at the source code it appears to me that it support just 'fill rectangle' and 'image blitting'.Is that all?
I have Fedora 11 and Intel Intel D410PT With Integrated Intel Atom Processor D410 and the Intel NM10 Express Chipset M-ITX Motherboard..Intel Graphics Media Accelerator 3150.How can I get Fedora 11 to install in graphics mode-would a PCI card and disable onboard stand a chance?
Do I have to "slipstream" the right driver in the install?Intel seem not to have a Linux driver-is there a generic one?
I have an intel core i3 laptop, it has 4gig of ram only showing 2 I am also running the x64 bit version of fedora 14.. My graphics will not work correctly. I have tried the intel driver for linux.. It did not work( or i did something wrong) very possible in messing up the install. I would llike to know if there is an update coming out or if i could get a step by step on how to fix, this issue..
I want to downgrade my Intel driver to version 2.11.0. I don't know what version I have at the moment but I have installed Fedora 15 (Lovelock). The reason is that Office 2007 has graphical bugs with Intel drivers that are newer than 2.11. So, will my gnome shell work fine after the downgrade and how to downgrade? I have searched a lot from google but didn't find any solutions.